Copying and Overwriting QoS Policies

You can copy an existing service egress or ingress policy, rename it with a new policy ID value, or overwrite an existing policy ID. The overwrite option must be specified or an error occurs if the destination policy ID exists.

Use the following syntax to overwrite an existing QoS policy ID:

CLI Syntax:

config>qos> copy sap-ingress source-policy-id dest-policy-id overwrite 

Example:

config>qos# copy sap-ingress 100 200
config>qos# copy sap-ingress 200 101
MINOR: CLI Destination "101" exists use {overwrite}
config>qos# copy sap-ingress 200 101 overwrite
config>qos# 

The following output displays the copied policies:

ALU-1>config>qos# info
---------------------------------------------
...
exit
        sap-ingress 100 create
            description "Used on VPN sap"
            queue 1 create
            exit
            rate 11000
            exit
...
            sap-ingress 101 create
            description "Used on VPN sap"
            queue 1 create
            exit
            rate 11000
            exit
            sap-ingress 200 create
            description "Used on VPN sap"
            queue 1 create
            exit
            rate 11000
            exit
...
---------------------------------------------
ALU-1>config>qos#