There is one default policy for service ingress and one default policy for service egress and MC-MLPPP SAP egress. Each policy can have up to eight ingress queues and eight egress queues per service. The default policies can be copied and modified but they cannot be deleted. The default policies are identified as policy ID 1.
Throughout this guide, the terms service ingress/egress and access ingress/egress are interchangeable. This section (Service Egress and Ingress QoS Policies) uses the term service ingress/egress.
The eight ingress queues can be designated as a unicast, broadcast, multicast, or unknown queue for the purposes of FC-to-queue mapping.
The default policies are applied to the appropriate interface, by default. For example, the default service ingress policy is applied to access ingress SAPs. The default service egress policy is applied to access egress SAPs and MC-MLPPP egress SAPs. You must explicitly associate other QoS policies.
For information about the tasks and commands necessary to access the command line interface and to configure and maintain the 7705 SAR, refer to the 7705 SAR Basic System Configuration Guide, ‟CLI Usage”.