This section provides information to configure SNMP parameters and provides examples of common configuration tasks. The minimal SNMP parameters are:
For SNMPv1 and SNMPv2c, configure community string parameters.
For SNMPv3:
Configure view parameters
Configure SNMP group
Configure access parameters
Configure user with SNMP parameters
The following displays SNMP default views, access groups, and attempts parameters.
ALU-1>config>system>security>snmp# info detail
----------------------------------------------
view iso subtree 1
mask ff type included
exit
view ‟mgmt-view” subtree 1.3.6.1.2.1.2
mask ff type excluded
exit
view ‟mgmt-view” subtree 1.3.6.1.2.1.4
mask ff type included
exit
view no-security subtree 1.3.6.1.6.3.11.2.1
mask ff type included
exit
view no-security subtree 1.3.6.1.6.3.15.1.1
mask ff type included
exit
access group snmp-ro security-model snmpv1 security-level no-auth-
no-privacy read no-security notify no-security
access group snmp-ro security-model snmpv2c security-level no-auth-
no-privacy read no-security notify no-security
access group snmp-rw security-model snmpv1 security-level no-auth-
no-privacy read no-security write no-security notify no-security
access group snmp-rw security-model snmpv2c security-level no-auth-
no-privacy read no-security write no-security notify no-security
access group snmp-rwa security-model snmpv1 security-level no-auth-
no-privacy read iso write iso notify iso
access group snmp-trap security-model snmpv1 security-level no-auth-
no-privacy notify iso
access group snmp-trap security-model snmpv2c security-level no-
auth-no-privacy notify iso
attempts 20 time 5 lockout 10