Configuring RADIUS Accounting

On the local router, use the following CLI commands to configure RADIUS accounting:

CLI Syntax:

config>system>security
    radius
        accounting

The following example displays the CLI syntax usage:

Example:

config>system>security>
config>system>security# radius
config>system>security>radius# accounting

The following example displays the RADIUS accounting configuration:

ALU-1>config>system>security# info
----------------------------------------------
...
           radius
               shutdown
               authorization
               accounting
               retry 5
               timeout 5
               server 1 address 10.10.10.103 secret "test1"
               server 2 address 10.10.0.1 secret "test2"
               server 3 address 10.10.0.2 secret "test3"
               server 4 address 10.10.0.3 secret "test4"
           exit
...
----------------------------------------------
ALU-1>config>system>security#