Configuring TACACS+ Accounting

On the local router, use the following CLI commands to configure TACACS+ accounting:

CLI Syntax:

config>system>security
    tacplus
        accounting

The following example displays the CLI syntax usage:

Example:

config>system>security>
config>system>security# tacplus
config>system>security>tacplus# accounting

The following example displays the TACACS+ accounting configuration:

ALU-1>config>system>security>tacplus# info
----------------------------------------------
                accounting
                authorization
                timeout 5
                server 1 address 10.10.0.5 secret "h6.TeL7YPohbmhlvz0gob." hash2
                server 2 address 10.10.0.6 secret "h6.TeL7YPog7WbLsR3QRd." hash2
                server 3 address 10.10.0.7 secret "h6.TeL7YPojGJqbYt85LVk" hash2
                server 4 address 10.10.0.8 secret "h6.TeL7YPoiCfWKUFHARvk" hash2
                server 5 address 10.10.0.9 secret "h6.TeL7YPojuCyTFvTNGBU" hash2
----------------------------------------------
ALU-1>config>system>security>tacplus#