Modifying Event Control Parameters

Use the following CLI syntax to modify event control parameters:

CLI Syntax:

config>log 
    event-control application-id [event-name | event-number] generate [severity-level][throttle] [specific-throttle-rate events-limit interval seconds | disable-specific-throttle]
    event-control application-id [event-name |event-number] suppress

The following displays the current event control configuration:

ALU-12>config>log# info
----------------------------------------------
...
    event-control "atm" 2014 generate critical
...
----------------------------------------------
ALU-12>config>log#

The following displays an example of event control modifications:

Example:

config# log
config>log# event-control atm 2014 suppress

The following displays the log filter configuration:

ALU-12>config>log# info
----------------------------------------------
...
        event-control "atm" 2014 suppress
...
----------------------------------------------
ALU-12>config>log#