Modifying a Log Filter

Use the following CLI syntax to modify a log filter:

CLI Syntax:

config>log 
    filter filter-id
        default-action {drop | forward}
        description description-string
        entry entry-id
            action {drop | forward}
            description description-string
            match 
                application {eq | neq} application-id
                message {eq | neq} pattern pattern [regexp]
                number{eq | neq | lt | lte | gt | gte}event-id
                router {eq | neq} router-instance [regexp]
                severity {eq | neq | lt | lte | gt | gte} severity-level
                subject {eq | neq} subject [regexp]

The following output displays the current log filter configuration:

ALU-12>config>log# info
#------------------------------------------
echo "Log Configuration"
#------------------------------------------
...
        filter 1
            default-action drop
            description "This is a test filter."
            entry 1
                action forward
                match
                    application eq "atm"
                    severity eq critical
                exit
            exit
        exit
...
------------------------------------------
ALU-12>config>log#

The following displays an example of the log filter modifications:

Example:

config# log
config>log# filter 1
config>log>filter# description "This allows <n>."
config>log>filter# default-action forward
config>log>filter# entry 1
config>log>filter>entry$ action drop
config>log>filter>entry# match 
config>log>filter>entry>match# application eq user
config>log>filter>entry>match# number eq 2001
config>log>filter>entry>match# no severity
config>log>filter>entry>match# exit

The following displays the log filter configuration:

ALU-12>config>log>filter# info
----------------------------------------
...
            description "This allows <n>."
            entry 1
                action drop
                match
                    application eq "user"
                    number eq 2001
                exit
            exit
        exit
...
----------------------------------------
ALU-12>config>log>filter#