Modifying an SNMP Trap Group

Use the following CLI syntax to modify an SNMP trap group:

CLI Syntax:

config>log 
    snmp-trap-group log-id 
        trap-target name [address ip-address] [port port] [snmpv1 | snmpv2c | snmpv3] notify-community communityName|snmpv3SecurityName[security-level {no-auth-no-privacy | 
auth-no-privacy | privacy}]

The following displays the current SNMP trap group configuration:

ALU-12>config>log# info
----------------------------------------------
...
    snmp-trap-group 10
        trap-target 10.10.10.104:5 "snmpv3" notify-community "communitystring" 
    exit
...
----------------------------------------------
ALU-12>config>log#

The following displays an example of the command usage to modify an SNMP trap group:

Example:

config# log
config>log# snmp-trap-group 10
config>log>snmp-trap-group# no trap-target 10.10.10.104:5 
config>log>snmp-trap-group# snmp-trap-group#  trap- target 10.10.0.91:1 snmpv2c notify-community "com1"

The following displays the SNMP trap group configuration:

ALU-12>config>log# info
----------------------------------------------
...
        snmp-trap-group 10
            trap-target 10.10.0.91:1 "snmpv2c" notify-community "com1"
        exit
...
----------------------------------------------
ALU-12>config>log#