Modifying a Syslog ID

Use the following CLI syntax to modify syslog ID parameters:

CLI Syntax:

config>log 
    syslog syslog-id
        address ip-address
        description description-string
        facility syslog-facility
        level {emergency | alert | critical | error | warning | notice | info | debug}
        log-prefix log-prefix-string
        port port

The following displays an example of the syslog ID modifications:

Example:

config# log
config>log# syslog 1
config>log>syslog$ description "Test syslog."
config>log>syslog# address 10.10.0.91
config>log>syslog# facility mail
config>log>syslog# level info

The following displays the syslog configuration:

ALU-12>config>log# info
----------------------------------------------
...
        syslog 1
            description "Test syslog."
            address 10.10.10.91
            facility mail
            level info
        exit
...
----------------------------------------------
ALU-12>config>log#