Operators can configure the following on a WLAN AP port:
dot1x parameters, depending on the type of security configured
DHCP relay (enabled or disable)
broadcast of the SSID, using the broadcast-ssid command
the maximum number of clients that can connect to the AP, using the client-limit command
the length of time the port waits before releasing and disconnecting a client when the client has not transmitted or received any data, using the client-timeout command
The DHCP relay setting can be modified without shutting down a WLAN AP port. All other AP parameters can only be modified when the WLAN port is shut down.
When a WLAN port is configured as an AP, the CLI parameters in the config>port>wlan>network>wlan-security>station context are not available.