The following GNSS location information can be displayed in the CLI:
latitude of the last position fix
longitude of the last position fix
time at which the last position fix was taken
altitude at which the last position fix was taken
heading and speed of the system
If a GNSS fix is acquired and then subsequently lost by the node, the last known GNSS fix data continues to be displayed in the CLI. When a GNSS fix is reacquired, the GNSS data will then update to match the new fix.
The last GNSS fix data is not preserved after a power-cycle, admin reboot, clear mda 1/1, or shutdown command is issued for GNSS.
The following satellite information can be displayed in the CLI for up to 30 satellites:
the satellite NMEA identifier—for GPS, the range is from 1 to 32; for GLONASS, the range is from 65 to 96
the elevation of the satellite relative to the node, from 0° to 90°
the azimuth relative to the node position, from 0° to 360°
the signal-to-noise ratio (SNR), from 0 to 99 dB