gnss
show>mda
This command displays detailed GNSS information, including position and satellite information.
If a GNSS fix is acquired and then subsequently lost by the node, the last known GNSS fix data continues to be displayed in the CLI. When a GNSS fix is reacquired, the GNSS data is updated to match the new fix.
The last GNSS fix data is not preserved after a power-cycle, admin reboot, clear mda 1/1, or shutdown command is issued for GNSS.
The following output is an example of GNSS information.
Output example*A:Dut-A#: show mda 1/1 gnss
===============================================================================
GNSS Information
===============================================================================
Admin State : Enabled
Oper State : Up
Satellite Constellation : gps-glonass
NMEA Sentence Streaming : Enabled
Sentences : gga rmc vtg gns
Sentence Interval (seconds) : 5
-------------------------------------------------------------------------------
Acquired Fix : Yes
Time : 2018/07/27 12:59:47 UTC
Position (degrees) : 45.34810, -75.92147
Position (degrees minutes seconds) : 45 20'53.1"N, 75 55'17.2"W
Altitude above mean sea level : 124.8 meters
Heading : 0.0 degrees
Speed : 0.0 kph
===============================================================================
==========================================
Visible Satellites
==========================================
# type elevation azimuth SNR(dB)
------------------------------------------
1 gps 22 158 43
7 gps 73 229 53
8 gps 64 54 57
9 gps 8 209 44
11 gps 48 165 49
13 gps 9 324 40
16 gps 2 90 40
18 gps 38 135 54
27 gps 27 50 49
28 gps 29 284 46
30 gps 52 296 51
69 glonass 7 302 31
70 glonass 4 352 43
77 glonass 49 113 44
78 glonass 68 343 53
79 glonass 28 316 47
81 glonass 18 199 42
86 glonass 0 28 45
87 glonass 54 43 44
88 glonass 66 177 43
------------------------------------------
No. of visible satellites: 20
==========================================
*A:Dut-A#