Show, Clear, Debug, and Tools Command Reference

Command Hierarchies

  1. Show Commands
  2. Clear Commands
  3. Debug Commands
  4. Tools Commands

Show Commands

show
— router
— gmpls
— lsp [lsp-name] [status {up | down}] [detail]
— lsp [lsp-name] path [path-name] [type {working | protect}] [detail]
— lsp [lsp-name] [status {up | down}] to ip-address [detail]
— peer [peer-node-id] [detail]
— peer [peer-node-id] {detail}
— path [path-name]
— session [session-type] [from ip-address] [to ip-address] [session-name session-name] [status {up | down}] [detail]
— te-link [te-link-id]
— lmp
— peer [peer-node-id] [detail]
— control-channel lmp-cc-id [detail]
— te-link [te-link-id] [detail]
— te-link te-link-id statistics
— data-bearer [data-bearer-id] [detail]
— gmpls-tun-grp [gmpls-tunnel-group-id] [using]
— member [member-id]

Clear Commands

clear
— router
— statistics

Debug Commands

debug
— router
— gmpls [lsp lsp-name] [sender sender-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [peer peer-node-id]
— no gmpls
— [no] event
— [no] lsp-setup
— [no] path
— [no] resv
— [no] peer
— [no] rr
— [no] misc
— [no] all
— [no] packet
— hello [detail]
— no hello
— path [detail]
— no path
— patherr [detail]
— no patherr
— pathtear [detail]
— no pathtear
— resv [detail]
— no resv
— resverr [detail]
— no resverr
— resvtear [detail]
— no resvtear
— notify [detail]
— no notify
— ack [detail]
— no ack
— srefresh [detail]
— no srefresh
— bundle [detail]
— no bundle
— all [detail]
— no all

Tools Commands

tools
— dump
— gmpls-tun-grp id
— router
— lmp
— peer peer-node-id
— control-channel lmp-cc-id
— te-link te-link-id
— gmpls
— lsp [lsp-name] [detail]
— path [path-name] [detail]
— peer [peer-node-id] [detail]
— port [session-name] [sender ip-address] [detail]
— psb [tunnelid tunnel-id] [lspid lsp-id] [detail]
— status
— te-link [te-link-id] [detail]

Command Descriptions

Show Commands

Note:

The command outputs in this chapter are examples only; actual displays may differ depending on supported functionality and user configuration.

gmpls

Syntax 
gmpls
Context 
show>router>gmpls
Description 

This command displays RSVP status information for the GMPLS instance of RSVP.

lsp

Syntax 
lsp [lsp-name] [status {up | down}] [detail]
lsp [lsp-name] path [path-name] [type {working | protect}] [detail]
lsp [lsp-name] [status {up | down}] to ip-address [detail]
Context 
show>router>gmpls
Description 

This command displays gLSP information.

Parameters 
lsp-name—
Specifies the identifier for the GMPLS LSP. The LSP name can be up to 32 characters long and must be unique.
status—
Specifies that the command display only LSPs that are either operationally up or down.
Values—
up — Display only LSPs that are operationally up. down — Display only LSPs that are operationally down.
path-name—
Specifies a unique case-sensitive name label for the LSP path.
Values—
32 characters maximum alphanumeric string
type—
Specifies that the command display only paths that are either working or protect.
Values—
working — Display only working paths. protect — Display only protect paths.
to ip-address—
Specifies the system IP address of the far-end UNI-C router for the GMPLS LSP.
detail—
Keyword to request more detailed output.

peer

Syntax 
peer [peer-node-id] [detail]
peer [peer-node-id] {statistics}
Context 
show>router>gmpls
Description 

This command displays GMPLS peer information.

Parameters 
peer-node-id—
Specifies the control plane node ID of the neighboring GMPLS UNI-N node. This can be an IP address or a 32-bit unsigned integer.
Values—
{a.b.c.d | 1 — 4294967295}
detail—
Keyword to request more detailed output.
statistics—
Keyword to request peer statistics.

path

Syntax 
path [path-name]
Context 
show>router>gmpls
Description 

This command displays GMPLS path information.

Parameters 
path-name—
Specifies a unique case-sensitive name label for the LSP path.
Values—
32 characters maximum alphanumeric string

session

Syntax 
session [session-type] [from ip-address] [to ip-address] [session-name session-name] [status {up | down}] [detail]
Context 
show>router>gmpls
Description 

This command displays GMPLS session information.

Parameters 
session-type—
Keyword to display information about the session type.
from ip-address—
Specifies the system IP address of the near-end UNI-C router.
to ip-address—
Specifies the system IP address of the far-end UNI-C router.
session-name—
Specifies the name of the GMPLS session.
status—
Specifies that the command display only GMPLS sessions that are either operationally up or down.
Values—
up — Display only sessions that are operationally up. down — Display only sessions that are operationally down.
detail—
Keyword to request more detailed output.

te-link

Syntax 
te-link [te-link-id]
Context 
show>router>gmpls
Description 

This command displays Traffic Engineering (TE) link information.

Parameters 
te-link-id—
Specifies the ID or name of the configured TE Link.
Values—
1 — 4294967295 | te-link-name te-link-name: 32 character maximum name of the TE Link

gmpls-tun-grp

Syntax 
gmpls-tun-grp [gmpls-tunnel-group-id] [using]
Context 
show
Description 

This command displays GMPLS tunnel group status and lists the gLSPs bound to each tunnel group.

Parameters 
id group-id—
Specifies that only GMPLS tunnel groups of the configured ID are displayed.
using—
Keyword to display information about which IP interfaces are using the tunnel groups.

member

Syntax 
member [member-id]
Context 
show>gmpls-tun-grp gmpls-tunnel-group-id
Description 

This command displays member information for the specified GMPLS tunnel group.

Parameters 
member-id—
Specifies the ID of the GMPLS tunnel group member.
Values—
1 — 16

peer

Syntax 
peer [peer-node-id] [detail]
Context 
show>router>lmp
Description 

This command displays LMP peer information.

Parameters 
peer-node-id—
Specifies the unique identifier for the LMP peer node.
detail—
Keyword to display more detailed output.
Output 

Peer Output Fields

Table 28 describes the peer output fields.

Table 28:  Peer Output Fields  

Label

Description  

Admin State

The administrative state of the LMP peer node.

Oper State

The operational state of the LMP peer node.

Retrans Intvl

The configured interval between resubmitted LMP messages.

Retry Limit

The configured number of times LMP resends a message before restarting the process.

Sample Output
A:ALA-1# show router lmp peer 16843009
================================================================================
LMP Peer 1.1.1.1 (16843009)
================================================================================
Admin State: : Out of Service Oper State : Down
Retrans Intvl : 5000 ms Retry Limit : 6
================================================================================
A:ALA-1#

control-channel

Syntax 
control-channel lmp-cc-id [detail]
Context 
show>router>lmp>peer
Description 

This command displays LMP control channel information for a specific peer.

Parameters 
lmp-cc-id—
Specifies the unsigned integer identifier for the control channel
Values—
1 — 42949672
detail—
Keyword to display more detailed output.
Output 

Control Channel Output Fields

Table 29 describes control channel output fields.

Table 29:  Control Channel Output Fields  

Label

Description 

Admin State

The administrative state of the control channel.

Oper State

The operational state of the control channel.

Remote Id

The remote ID of the control channel.

Setup Role

The setup role of the control channel.

Hello Interval

The interval at which LMP hello packets are sent on the control channel.

Hello Dead Intv

The interval after which the IPCC is declared down if no hello packets are received from the LMP peer.

Peer If Addr

The LMP peer interface address.

Inbound Errors

The total number of inbound packet errors.

Outbound Errors

The total number of outbound packet errors.

Message Type

The types of message packets sent and received on the control channel.

Received

The total number of received packets of a specific type.

Sent

The total number of sent packets of a specific type.

Retransmitted

The total number of retransmitted packets of a specific type.

Sample Output
A:ALA-1# show router lmp peer 16843009 control-channel 1
================================================================================
LMP Control Channel 1 Statistics
================================================================================
Admin State: : Out of Service Oper State : Going Down
Remote Id : 10 Setup Role : Active
Hello Interval : 3000 Hello Dead Intv : 10000
Peer If Addr : 100.100.100.100
Inbound Errors : 100 Outbound Errors : 50
--------------------------------------------------------------------------------
Message Type Received Sent Retransmitted
--------------------------------------------------------------------------------
Config 1111 11 111
ConfigAck 15 6 N/A
ConfigNack 1 2 N/A
Hello 40 20 N/A
LinkSummary 6000 500 10
LinkSummaryAck 35 30 N/A
LinkSummaryNack 400 3000 N/A
================================================================================
A:ALA-1#

te-link

Syntax 
te-link [te-link-id] [detail]
te-link te-link-id statistics
Context 
show>router>lmp
Description 

This command displays Traffic Engineering (TE) link information.

Parameters 
te-link-id—
Specifies the ID of a TE Link.
Values—
1 — 4294967295 | te-link-name te-link-name: 32 character (max) name of the TE Link
detail—
Keyword to display more detailed output.
statistics—
Keyword to display TE Link statistics.
Output 

TE Link Output Fields

Table 30 describes TE link output fields.

Table 30:  TE Link Output Fields  

Label

Description 

Admin State

The administrative state of the TE link.

Oper State

The operational state of the TE link.

Remote Id

The remote ID of the TE link.

Peer Node Id

The LMP peer node ID.

Received

The total number of received packets of a specific type.

Sent

The total number of sent packets of a specific type.

Retransmitted

The total number of retransmitted packets of a specific type.

Sample Output
*A:SRU4>show>router>lmp# te-link 254
================================================================================
LMP TE Link 254 (Name) Statistics
================================================================================
Admin State : In Service Oper State : Degraded
Remote Id : 10 Peer Node Id : 15
--------------------------------------------------------------------------------
Message Type Received Sent Retransmitted
--------------------------------------------------------------------------------
LinkSummary 100 100 600
LinkSummaryAck 30 25 N/A
LinkSummaryNack 70 75 N/A
================================================================================

data-bearer

Syntax 
data-bearer [data-bearer-id] [detail]
Context 
show>router>lmp>te-link
Description 

This command displays LMP data bearer information.

Parameters 
data-bearer-id—
Specifies the ID of a data bearer link.
detail—
Keyword to display more detailed output.
Output 

Data Bearer Output Fields

Table 31 describes the data bearer output fields.

Table 31:  Data Bearer Output Fields  

Label

Description

Admin State

The administrative state of the data bearer link.

Oper State

The operational state of the data bearer link.

Remote Id

The remote ID of the data bearer link.

Port

The port used by the data bearer link.

Sample Output
*A:SRU4>show>router>lmp>te-link# data-bearer 254
================================================================================
LMP Data Bearer Link 254 Statistics
================================================================================
Admin State : In Service Oper State : Up Free
Remote Id : 10 Port : 1/1/1
================================================================================

Clear Commands

statistics

Syntax 
statistics
Context 
clear>router>gmpls>peer
Description 

This command clears control packet statistics.

Debug Commands

gmpls

Syntax 
gmpls [lsp lsp-name] [sender sender-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [peer peer-node-id]
no gmpls
Context 
debug>router
Description 

This command enables and configures debugging for GMPLS.

The no form of the command disables debugging for GMPLS.

Parameters 
lsp-name—
Debug all GMPLS instances that contain the specified LSP. 80 characters max.
sender-address—
Debug all GMPLS instances that contain the specified sender IP address, in dotted decimal notation.
Values—
a.b.c.d
endpoint-address—
Debug all GMPLS instances that contain the specified endpoint IP address, in dotted decimal notation.
Values—
a.b.c.d
tunnel-id—
Debug all GMPLS instances that contain the specified identifier of a tunnel.
Values—
0 — 4294967295
lsp-id—
Debug all GMPLS instances that contain the specified identifier of an LSP.
Values—
1 — 65535
peer-node-id—
Debug all GMPLS instances that contain the specified identifier or IP address of a peer node.
Values—
1 — 4294967295 | a.b.c.d

event

Syntax 
[no] event
Context 
debug>router>gmpls
Description 

This command enables and disables debugging for specific GMPLS events.

all

Syntax 
[no] all
Context 
debug>router>gmpls
Description 

This command enables and disables debugging for GMPLS All events.

lsp-setup

Syntax 
[no] lsp-setup
Context 
debug>router>gmpls
Description 

This command enables and disables debugging for GMPLS LSP Setup events.

misc

Syntax 
[no] misc
Context 
debug>router>gmpls
Description 

This command enables and disables debugging for GMPLS Misc events.

path

Syntax 
[no] path
Context 
debug>router>gmpls
Description 

This command enables and disables debugging for GMPLS Path events.

peer

Syntax 
[no] peer
Context 
debug>router>gmpls
Description 

This command enables and disables debugging for GMPLS NBR events.

resv

Syntax 
[no] resv
Context 
debug>router>gmpls
Description 

This command enables and disables debugging for GMPLS Resv events.

rr

Syntax 
[no] rr
Context 
debug>router>gmpls
Description 

This command enables and disables debugging for GMPLS Refresh Reduction events.

packet

Syntax 
[no] packet
Context 
debug>router>gmpls
Description 

This command enables and disables debugging for specific GMPLS packets.

hello

Syntax 
hello [detail]
no hello
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS Hello packets.

The no form of the command disables debugging for GMPLS Hello packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

path

Syntax 
path [detail]
no path
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS Path packets.

The no form of the command disables debugging for GMPLS Path packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

patherr

Syntax 
patherr [detail]
no patherr
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS PathErr packets.

The no form of the command disables debugging for GMPLS PathErr packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

pathtear

Syntax 
pathtear [detail]
no pathtear
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS PathTear packets.

The no form of the command disables debugging for GMPLS PathTear packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

resv

Syntax 
resv [detail]
no resv
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS Resv packets.

The no form of the command disables debugging for GMPLS Resv packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

resverr

Syntax 
resverr [detail]
no resverr
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS ResvErr packets.

The no form of the command disables debugging for GMPLS ResvErr packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

resvtear

Syntax 
resvtear [detail]
no resvtear
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS ResvTear packets.

The no form of the command disables debugging for GMPLS ResvTear packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

notify

Syntax 
notify [detail]
no notify
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS Notify packets.

The no form of the command disables debugging for GMPLS Notify packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

ack

Syntax 
ack [detail]
no ack
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS Ack packets.

The no form of the command disables debugging for GMPLS Ack packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

srefresh

Syntax 
srefresh [detail]
no srefresh
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS Srefresh packets.

The no form of the command disables debugging for GMPLS Srefresh packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

bundle

Syntax 
bundle [detail]
no bundle
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS Bundle packets.

The no form of the command disables debugging for GMPLS Bundle packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

all

Syntax 
all [detail]
no all
Context 
debug>router>gmpls>packet
Description 

This command enables debugging for GMPLS All packets.

The no form of the command disables debugging for GMPLS All packets.

Parameters 
detail—
Keyword to produce debug output in greater detail.

Tools Commands

gmpls-tun-grp

Syntax 
gmpls-tun-grp gmpls-tunnel-group-id
Context 
tools>dump
Description 

This command dumps information about a GMPLS tunnel group.

Parameters 
gmpls-tunnel-group-id—
The identifier of the GMPLS tunnel group.
Values—
1 — 1024
Output 

Sample Output
*A:Dut-A-UNI-C# tools dump gmpls-tun-grp 1
TunnelGrpId 1: (Up/Up), Port gmpls-tun-grp-1 (Up/Up), mode load-sharing
Type: Head, far-end: 52.52.52.52, bw 40000000, memThreshold 0, portId 0x5c000001
NumMems: 5/4/0(0), Up/Dn 1/0, active 0x1e, present 0x1e iom 0x2 Mtu 9212
gmplsUpd: 8 (000 01:11:23.350), Now: 000 08:34:12.970
memId 1: (Up/Dn), session: 1::1, reg: Y
DnReasons: wpLspDn
Work: N/A (Ghost), status: Dn, Cnt(Up/Dn/PortChg): 0/0/0
lspState Dn, lspUpd: 0 (000 00:00:00.000), rsrcAdded N
memId 2: (Up/Up), session: 1::empty, reg: Y
Work: 1/2/1 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:10:14.720), rsrcAdded Y
memId 3: (Up/Up), session: 2::empty, reg: Y
Work: 1/2/2 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:10:23.650), rsrcAdded Y
memId 4: (Up/Up), session: 3::empty, reg: Y
Work: 1/1/14 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:10:05.880), rsrcAdded Y
memId 5: (Up/Up), session: 4::empty, reg: Y
Work: 1/1/13 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:09:50.710), rsrcAdded Y
Sorted list of 4 member port(s):
1/1/13 1/1/14 1/2/1 1/2/2
*A:Dut-A-UNI-C# tools dump gmpls-tun-grp 1
clear
*A:Dut-A-UNI-C# tools dump gmpls-tun-grp 1 clear
TunnelGrpId 1: (Up/Up), Port gmpls-tun-grp-1 (Up/Up), mode load-sharing
Type: Head, far-end: 52.52.52.52, bw 40000000, memThreshold 0, portId 0x5c000001
NumMems: 5/4/0(0), Up/Dn 1/0, active 0x1e, present 0x1e iom 0x2 Mtu 9212
gmplsUpd: 8 (000 01:11:23.350), Now: 000 08:34:20.390
memId 1: (Up/Dn), session: 1::1, reg: Y
DnReasons: wpLspDn
Work: N/A (Ghost), status: Dn, Cnt(Up/Dn/PortChg): 0/0/0
lspState Dn, lspUpd: 0 (000 00:00:00.000), rsrcAdded N
memId 2: (Up/Up), session: 1::empty, reg: Y
Work: 1/2/1 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:10:14.720), rsrcAdded Y
memId 3: (Up/Up), session: 2::empty, reg: Y
Work: 1/2/2 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:10:23.650), rsrcAdded Y
memId 4: (Up/Up), session: 3::empty, reg: Y
Work: 1/1/14 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:10:05.880), rsrcAdded Y
memId 5: (Up/Up), session: 4::empty, reg: Y
Work: 1/1/13 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:09:50.710), rsrcAdded Y
Sorted list of 4 member port(s):
1/1/13 1/1/14 1/2/1 1/2/2

peer

Syntax 
peer peer-node-id
Context 
tools>dump>router>lmp
Description 

This command dumps information about a specific LMP peer.

Parameters 
peer-node-id—
An identifier for the LMP peer node. This may be an IPv4-formatted address or a 32-bit unsigned integer.
Values—
a.b.c.d | 1 — 4294967295

control-channel

Syntax 
control-channel lmp-cc-id
Context 
tools>dump>router>lmp>peer
Description 

This command dumps information about a control channel of an LMP peer.

Parameters 
lmp-cc-id—
An unsigned integer identifier for the control channel.
Values—
1 — 42949672
Output 

Sample Output
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.21
10.27.255.213 10.27.255.219
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.21 control-channel 7001
MINOR: CLI peer 10.27.255.21 is not configured.
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.21
10.27.255.213 10.27.255.219
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.213 control-channel
<lmp-cc-id>
7001
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.213 control-channel 7001
Local: 7001, Remote: 7004, State Up/Up, Nbr 10.27.255.213
Dst: 10.27.255.213, Nh: 172.21.36.173, EgrIfIndex: 3, Src: 52.52.52.52
Hello 1000/1000, Dead 3000/3000, Seq (Tx/Rx/Ack) 57995/16109/57995
LastEvt: rxHello, Tmrs: Hello Hold
Cntrs: Errs(in/out) 0/0, Rx: cfg/Ack/Nack/Hello: 6/14/0/57887
Cntrs: Tx: cfg/Ack/Nack/Hello: 14(30)/0/0/57995, reTxCnt: 0
RxCfg: 7004: 1000/3000, RxNack: 0: 0/0
TxMsgId: 44, RxMsgId(cfg/ack/nack): 1/44/0
LkSum Cntrs (sum/ack/nack) Tx: 11654(216)/11620/0, Rx: 11724/11858/0
Now: 000 16:19:13.900
Seq Event prevState state TxPkt Time
=== ========== ======== ======== ===== ================
009 rxHello Active Up --- 000 09:40:02.410
010 holdTmr Up CfgSnd Cfg 000 10:15:14.410
011 reTxTmr CfgSnd CfgSnd Cfg 000 10:15:14.900
012 rxAck CfgSnd Active Hello 000 10:15:23.040
013 rxHello Active Up --- 000 10:15:24.020
014 holdTmr Up CfgSnd Cfg 000 10:35:15.070
015 rxAck CfgSnd Active Hello 000 10:35:15.080
016 rxHello Active Up --- 000 10:35:16.060
017 holdTmr Up CfgSnd Cfg 000 10:45:20.090
018 rxAck CfgSnd Active Hello 000 10:45:20.100
019 rxHello Active Up --- 000 10:45:21.080
000 holdTmr Up CfgSnd Cfg 000 10:50:21.480
001 rxAck CfgSnd Active Hello 000 10:50:21.490
002 rxHello Active Up --- 000 10:50:22.480
003 holdTmr Up CfgSnd Cfg 000 11:05:23.550
004 rxAck CfgSnd Active Hello 000 11:05:23.560
005 rxHello Active Up --- 000 11:05:24.540
006 holdTmr Up CfgSnd Cfg 000 11:40:33.600
007 rxAck CfgSnd Active Hello 000 11:40:33.610
008 rxHello Active Up --- 000 11:40:34.600

te-link

Syntax 
te-link te-link-id
Context 
tools>dump>router>lmp>peer
Description 

This command dumps information about a TE link.

Parameters 
te-link-id—
The identifier of the TE link.
Values—
1 — 4294967295 | te-link-name
Output 

Sample Output
*A:Dut-B-UNI-C>tools>dump>router>lmp# te-link 1010701
Local 1010701 (), State Up/Up, Remote: 1010701, db 1(1), resv 0, msgId 11871
Cntrs (sum/ack/nack) Tx: 2912(8)/2906/0, Rx: 2906/2914/0, Up/Dn: 14/13
LastEvt: ackRxSm (000 16:19:18.070), Now: 000 16:19:33.270
LastRxLkSum: Id 1010701, dbCnt 1, ErrCode 0x0, Flags: 0x0
RxDb: Id(L/R) 101070117/101070117, Flags: 0x3
SubObj: type/len/sw/enc: 1/12/125/2, Kbps(Min/Max): 10000000/10000000
LastRxLkSumNack: msgId 0, dbCnt 0, ErrCode 0x0, Flags: 0x0
Db Links:
1010701-101070117 (1/1/13): State Up/UpAlloc, port Up/Up RemoteId: 101070117,
Alloc Y, bw 10000000, portBw 10000000/10000000, tunGrp 1, cfg: Y, Lpc: Y
Alloc (Cnt/Tm): 3/000 10:16:21.770, Free 2/000 10:15:32.050
Cnt(Up/Dn): 1/0, UpDnTm: 000 00:10:55.310

lsp

Syntax 
lsp [lsp-name] [detail]
Context 
tools>dump>router>gmpls
Description 

This command dumps information about LSPs. Configuring the lsp-name parameter will only dump information about the specified LSP.

Parameters 
lsp-name—
The name of the LSP. 32 characters max.
detail—
Keyword to output information in greater detail.
Output 

Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# lsp "D1"
LSP "D1", LspIndex: 1, Type: GMPLS-UNI, AdminState: UP, OperState: UP, Flags: 0x0
Total LSP Count: 1
*A:Dut-B-UNI-C>tools>dump>router>gmpls# lsp "D1" detail
=================================================================================
LSP "D1", LspIndex: 1
Type: GMPLS-UNI, AdminState: UP, OperState: UP, Flags: 0x0
LastChange: 02/04/2015 23:30:34
TimeSinceLastOperChange: 0d 15:07:19
NumWorkingPaths: 1, NumProtectPaths: 0
NumWorkingPathsUp: 1, NumProtectPathsUp: 0
----------------------------------------------------------------------------------
LspPath PathIndex: 2, Type: Working
AdminState: UP, OperState:Up, Flags: 0x0
LastChange: 02/04/2015 23:30:34
TimeSinceLastOperChange: 0d 15:07:19
LspId: 296, SessionName: D1::2
CurrState: LSP_PATH_UP, PrevState: LSP_PATH_INIT
RetryCount: 107, FailNode: 0.0.0.0, FailCode: none
Peer: 0.0.0.0
PSB: vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52 - 296)
Actual Hops:
Hop 1 : Unnumbered RouterId 52.52.52.52, InterfaceId 1010702
UpStreamLabel 0, DnStreamLabel 101070217, Flags 0x0
Hop 2 : Unnumbered RouterId 10.27.255.213, InterfaceId 1010702
UpStreamLabel 101070217, DnStreamLabel 0, Flags 0x0
SRLG List 27
Hop 3 : Unnumbered RouterId 10.27.255.213, InterfaceId 13000
UpStreamLabel 0, DnStreamLabel 101070230, Flags 0x0
SRLG List 4
Hop 4 : Unnumbered RouterId 10.27.255.219, InterfaceId 13001
UpStreamLabel 101070230, DnStreamLabel 0, Flags 0x0
Hop 5 : Unnumbered RouterId 10.27.255.219, InterfaceId 1010702
UpStreamLabel 0, DnStreamLabel 101070217, Flags 0x0
SRLG List 27
Hop 6 : Unnumbered RouterId 72.72.72.72, InterfaceId 1010702
UpStreamLabel 101070217, DnStreamLabel 0, Flags 0x0
=================================================================================
Total LSP Count: 1

path

Syntax 
path [path-name] [detail]
Context 
tools>dump>router>gmpls
Description 

This command dumps information about paths. Configuring the path-name parameter will only dump information about the specified path.

Parameters 
path-name—
The name of the path. 32 characters max.
detail—
Keyword to output information in greater detail.
Output 

Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# path
<path-name>
"empty" "2" "3" "5"
detail
*A:Dut-B-UNI-C>tools>dump>router>gmpls# path "2"
Path "2", PathIndex: 2, NumHops: 2, LspPathCount: 1, EmptyPathLspBindCount: 0,
Flags: 0x0
Total Path Count: 1
*A:Dut-B-UNI-C>tools>dump>router>gmpls# path "2" detail
-------------------------------------------------------------------------------
Path "2", PathIndex: 2
AdminState: UP, OperState:UP
LastChange: 02/04/2015 23:30:34
NumHops: 2, LspPathCount: 1, EmptyPathLspBindCount: 0, Flags: 0x0
Hop: 1, NodeId: 52.52.52.52, TeLinkId: 1010702, Loose
LastChange: 02/04/2015 23:30:34
Hop: 2, NodeId: 10.27.255.219, TeLinkId: 1010702, Strict
LastChange: 02/04/2015 23:30:34
-------------------------------------------------------------------------------
Total Path Count: 1

peer

Syntax 
peer [peer-node-id] [detail]
Context 
tools>dump>router>gmpls
Description 

This command dumps information about peer nodes. Configuring the peer-node-id parameter will only dump information about the specified peer node.

Parameters 
peer-node-id—
The identifier of the peer node.
Values—
a.b.c.d | 1 — 4294967295
detail—
Keyword to output information in greater detail.
Output 

Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# peer 10.27.255.213
PEER: vrId 1 PeerAddr 10.27.255.213, AdminState: UP, OperState: UP, HelloState: UP
Total Peer Count: 1
*A:Dut-B-UNI-C>tools>dump>router>gmpls# peer 10.27.255.213 detail
PEER vrId 1 PeerAddr 10.27.255.213
AdminState: UP, OperState:UP, OperDownReason: N/A
LastChange: 02/04/2015 23:30:34, UpTime: 0d 15:12:39
HelloInterval: 3000msecs, LspHoldTime: 60secs
Flags: 0x30, HelloState: Up
SrcInst: 0xffffff16, DstInst: 0x54d2ba31, PrevSrcInst: 0xffffff16
PeerDownCount: 13, InstMismatchCount: 2, TimeoutCount: 0
Source: 52.52.52.52, Dest: 10.27.255.213 NextHop: 172.21.36.173 [If: 3]
Status: Up, MTU: 0, NumChngInNextHop: 0, LastChange: 02/05/2015 10:53:24
GrHEpoch: 0x5b298, RestartTime: 4294967295, RecoveryTime: 90000
PrevDstInst: 0x0, InvokedCount: 12, ScanEvent: N [N N]
RefreshReduction:
Local - MsgId: Enabled, AckDesired: Enabled, Srefresh: Enabled, Epoch: 3236554
Remote - MsgId: Supported, Srefresh: Supported, Epoch: 13810201, HighestMsgIdRx:
3670
NumTxMsgIds: 4, NumRxMsgIds: 4
NumOutOfOrderMsg: 0, NumRetransmittedMsg: 11, NumPendingAckNack: 0
NextSrefresh: 9sec
DownstreamSessionCount: 2, UpstreamSessionCount: 2
Path Timeouts: 0, Resv Timeouts: 0
Packet Statistics:
Hello Tx : 17 Hello Rx : 19338
Path Tx : 194 Path Rx : 424
PathErr Tx : 0 PathErr Rx : 183
PathTear Tx: 5 PathTear Rx: 2
Resv Tx : 22 Resv Rx : 58
ResvErr Tx : 2 ResvErr Rx : 0
ResvTear Tx: 0 ResvTear Rx: 0
Notify Tx : 0 Notify Rx : 5
Srfresh Tx : 1946 Srefresh Rx: 1933
Ack Tx : 2157 Ack Rx : 2170
-----------------------------------------------------------------------------------
Total Peer Count: 1

port

Syntax 
port [session-name] [sender ip-address] [detail]
Context 
tools>dump>router>gmpls
Description 

This command dumps information about a port.

Parameters 
session-name—
The name of the session. 80 characters max; accepts * as a wildcard character.
sender ip-address—
The IP address of the sender, in dotted decimal notation.
Values—
a.b.c.d
detail—
Keyword to output information in greater detail.
Output 

Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# port sender
sender <ip-address>
52.52.52.52 42.42.42.42 62.62.62.62 72.72.72.72
*A:Dut-B-UNI-C>tools>dump>router>gmpls# port sender 42.42.42.42
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: A1::5 Sender: 0.0.0.0"
TunnelGrpId: 5 MemberId: 5 Mode:LoadSharing
cfgFarEnd: 42.42.42.42 Flags: 0x0 NumUpdSent: 7 NumSrlgChng: 0
PSB: vrId: 1 Session (To: 42.42.42.42 - 3 - 52.52.52.52), Sender (52.52.52.52 -
299)
SRLG Collected :-
SRLG 27
SRLG List: Num 2 -->
4 5
SRLG 27
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: B1::1 Sender: 42.42.42.42"
TunnelGrpId: 1 MemberId: 1 Mode:LoadSharing
cfgFarEnd: 42.42.42.42 Flags: 0x0 NumUpdSent: 24 NumSrlgChng: 0
PSB: vrId: 1 Session (To: 52.52.52.52 - 1 - 42.42.42.42), Sender (42.42.42.42 - 46)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: B1::4 Sender: 72.72.72.72"
TunnelGrpId: 4 MemberId: 4 Mode:LoadSharing
cfgFarEnd: 72.72.72.72 Flags: 0x0 NumUpdSent: 20 NumSrlgChng: 0
PSB: vrId: 1 Session (To: 52.52.52.52 - 3 - 72.72.72.72), Sender (72.72.72.72
- 286)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: B1::6 Sender: 62.62.62.62"
TunnelGrpId: 6 MemberId: 6 Mode:LoadSharing
cfgFarEnd: 62.62.62.62 Flags: 0x0 NumUpdSent: 15 NumSrlgChng: 0
PSB: vrId: 1 Session (To: 52.52.52.52 - 3 - 62.62.62.62), Sender (62.62.62.62
- 871)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: C1::3 Sender: 0.0.0.0"
TunnelGrpId: 3 MemberId: 1 Mode:LoadSharing
cfgFarEnd: 62.62.62.62 Flags: 0x0 NumUpdSent: 12 NumSrlgChng: 3
PSB: vrId: 1 Session (To: 62.62.62.62 - 2 - 52.52.52.52), Sender (52.52.52.52
- 297)
SRLG Collected :-
SRLG 27
SRLG 5
SRLG 27
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: D1::2 Sender: 0.0.0.0"
TunnelGrpId: 2 MemberId: 2 Mode:LoadSharing
cfgFarEnd: 72.72.72.72 Flags: 0x0 NumUpdSent: 10 NumSrlgChng: 0
PSB: vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52
- 296)
SRLG Collected :-
SRLG 27
SRLG 4
SRLG 27
----------------------------------------------------------------------------------
Total Port Count: 6
*A:Dut-B-UNI-C>tools>dump>router>gmpls# port sender 42.42.42.42
<session-name>
"A1::5" "B1::1" "B1::6" "B1::4" "C1::3" "D1::2"
detail
*A:Dut-B-UNI-C>tools>dump>router>gmpls# port sender 42.42.42.42 detail
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: A1::5 Sender: 0.0.0.0"
TunnelGrpId: 5 MemberId: 5 Mode:LoadSharing
cfgFarEnd: 42.42.42.42 Flags: 0x0 NumUpdSent: 7 NumSrlgChng: 0
PSB: vrId: 1 Session (To: 42.42.42.42 - 3 - 52.52.52.52), Sender (52.52.52.52
- 299)
SRLG Collected :-
SRLG 27
SRLG List: Num 2 -->
4 5
SRLG 27
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: B1::1 Sender: 42.42.42.42"
TunnelGrpId: 1 MemberId: 1 Mode:LoadSharing
cfgFarEnd: 42.42.42.42 Flags: 0x0 NumUpdSent: 24 NumSrlgChng: 0
PSB: vrId: 1 Session (To: 52.52.52.52 - 1 - 42.42.42.42), Sender (42.42.42.42
- 46)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: B1::4 Sender: 72.72.72.72"
TunnelGrpId: 4 MemberId: 4 Mode:LoadSharing
cfgFarEnd: 72.72.72.72 Flags: 0x0 NumUpdSent: 20 NumSrlgChng: 0
PSB: vrId: 1 Session (To: 52.52.52.52 - 3 - 72.72.72.72), Sender (72.72.72.72
- 286)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: B1::6 Sender: 62.62.62.62"
TunnelGrpId: 6 MemberId: 6 Mode:LoadSharing
cfgFarEnd: 62.62.62.62 Flags: 0x0 NumUpdSent: 15 NumSrlgChng: 0
PSB: vrId: 1 Session (To: 52.52.52.52 - 3 - 62.62.62.62), Sender (62.62.62.62
- 871)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: C1::3 Sender: 0.0.0.0"
TunnelGrpId: 3 MemberId: 1 Mode:LoadSharing
cfgFarEnd: 62.62.62.62 Flags: 0x0 NumUpdSent: 12 NumSrlgChng: 3
PSB: vrId: 1 Session (To: 62.62.62.62 - 2 - 52.52.52.52), Sender (52.52.52.52
- 297)
SRLG Collected :-
SRLG 27
SRLG 5
SRLG 27
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: D1::2 Sender: 0.0.0.0"
TunnelGrpId: 2 MemberId: 2 Mode:LoadSharing
cfgFarEnd: 72.72.72.72 Flags: 0x0 NumUpdSent: 10 NumSrlgChng: 0
PSB: vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52
- 296)
SRLG Collected :-
SRLG 27
SRLG 4
SRLG 27
----------------------------------------------------------------------------------
Total Port Count: 6

psb

Syntax 
psb [tunnelid tunnel-id] [lspid lsp-id] [detail]
Context 
tools>dump>router>gmpls
Description 

This command dumps information about a PSB.

Parameters 
tunnel-id—
The identifier of the tunnel.
Values—
0 — 4294967295
lsp-id—
The identifier of the LSP.
Values—
1 — 65535
detail—
Keyword to output information in greater detail.
Output 

Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# psb
PSB:
vrId: 1 Session (To: 42.42.42.42 - 3 - 52.52.52.52), Sender (52.52.52.52 - 299)
--------------------------------------------------------------------------------
PSB:
vrId: 1 Session (To: 52.52.52.52 - 1 - 42.42.42.42), Sender (42.42.42.42 - 46)
--------------------------------------------------------------------------------
PSB:
vrId: 1 Session (To: 52.52.52.52 - 3 - 62.62.62.62), Sender (62.62.62.62 - 871)
--------------------------------------------------------------------------------
PSB:
vrId: 1 Session (To: 52.52.52.52 - 3 - 72.72.72.72), Sender (72.72.72.72 - 286)
--------------------------------------------------------------------------------
PSB:
vrId: 1 Session (To: 62.62.62.62 - 2 - 52.52.52.52), Sender (52.52.52.52 - 297)
--------------------------------------------------------------------------------
PSB:
vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52 - 296)
--------------------------------------------------------------------------------
Total PSB Count: 6
*A:Dut-B-UNI-C>tools>dump>router>gmpls# psb tunnelid 1 detail
--------------------------------------------------------------------------------
PSB:
vrId: 1 Session (To: 52.52.52.52 - 1 - 42.42.42.42), Sender (42.42.42.42 - 46)
PSB CurrState: GMPLS_PSB_UP PrevState: GMPLS_PSB_UP Flags: 0x0
isIngress: N isTransit: N isEgress: Y
DnStream Peer: None
UpStream Peer: vrId 1 PeerAddr 10.27.255.213
UpStream TELink: vrId 1 TELinkId 1010701, dBLink: vrId 1 DBLinkId 101070117
RemoteDBLinkId: 101070117, PortId: 0x2268000, refCnt: 1, State: UP
Sender Template - Sender: 42.42.42.42, LspId: 46
Session Attribute -
Session Name: B1::1
Ctype: 7, HoldPri: 1, SetupPri: 5, Flags: 0x2
IncludeGroup: 0x0, IncludeAllGroup: 0x0, ExcludeGroup: 0x0
Lsp Attribute - TLV: 1, Flags: 0x80000
NextPathRefresh: 0secs, PathRefreshTimeout: 151secs
Path RX Message Id: 2209, Epoch: 13810201, Flags: 0x1
PSB RRO : ->
(1) Unnumbered RouterId 10.27.255.213, InterfaceId 1010701, Flags 0x0
(2) SRLG 27
(3) Label 101070117, Flags 0x0
(4) Unnumbered RouterId 10.27.255.213, InterfaceId 13004, Flags 0x0
(5) Label 101070130, Flags 0x80
(6) Unnumbered RouterId 10.27.255.215, InterfaceId 13007, Flags 0x0
(7) SRLG 6
(8) Label 101070130, Flags 0x0
(9) Unnumbered RouterId 10.27.255.215, InterfaceId 1010701, Flags 0x0
(10) SRLG 27
(11) Label 101070117, Flags 0x80
(12) Unnumbered RouterId 42.42.42.42, InterfaceId 1010701, Flags 0x0
(13) Label 101070117, Flags 0x0
PSB ERO : ->
(1) IPv4Prefix 52.52.52.52/32, Strict [1]
PSB XRO : ->
NULL XRO
PROTECTION - Flags: 0x0, E2EProtectionType: 0
LinkFlags: 0x0, SegProtFlags: 0x0, SegProtType: 0x1
ASSOCIATION - Type: 0, AssociationId: 46, Source: 42.42.42.42
NOTIFY REQ - Node: 10.27.255.213
RSB:
NextResvRefresh: 9secs, ResvRefreshTimeout: 0secs
Resv TX Message Id: 2661, Flags: 0x0
PROTECTION - Flags: 0x0, E2EProtectionType: 0
LinkFlags: 0x0, SegProtFlags: 0x0, SegProtType: 0x1
FLOWSPEC : ->
Ctype: 6 SwitchingGranularity: 1, MTU: 9212, TlvFlags: 0x1
EthBWProfileTlv - Profile: 0, Index: 0
CIR: 10.000 Gbps, CBS: 10.000 Gbps
EIR: infinity, EBS: infinity
FILTERSPEC Label : 0
FILTERSPEC RRO : ->
(1) Unnumbered RouterId 52.52.52.52, InterfaceId 1010701, Flags 0x0
(2) Label 101070117, Flags 0x80
NOTIFY REQ - Node: 52.52.52.52
Bound to LSPPORT: vrId: 1 Type: 0 Session: B1::1 Sender: 42.42.42.42
Num Paths Received :78
Num Paths Transmitted :0
Num Resvs Received :0
Num Resvs Transmitted :1
Num Summmary Paths Received :737
Num Summmary Paths Transmitted:0
Num Summmary Resvs Received :0
Num Summmary Resvs Transmitted:750
Created at 37048 (21983 secs back)
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
PSB:
vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52 - 296)
PSB CurrState: GMPLS_PSB_UP PrevState: GMPLS_PSB_UP Flags: 0x0
isIngress: Y isTransit: N isEgress: N
DnStream Peer: vrId 1 PeerAddr 10.27.255.213
UpStream Peer: None
DnStream TELink: vrId 1 TELinkId 1010702, dBLink: vrId 1 DBLinkId 101070217
RemoteDBLinkId: 101070217, PortId: 0x2270000, refCnt: 1, State: UP
Sender Template - Sender: 52.52.52.52, LspId: 296
Session Attribute -
Session Name: D1::2
Ctype: 7, HoldPri: 1, SetupPri: 5, Flags: 0x2
IncludeGroup: 0x0, IncludeAllGroup: 0x0, ExcludeGroup: 0x0
Lsp Attribute - TLV: 1, Flags: 0x80000
NextPathRefresh: 3secs, PathRefreshTimeout: 0secs
Path TX Message Id: 471, Flags: 0x0
PSB RRO : ->
(1) Unnumbered RouterId 52.52.52.52, InterfaceId 1010702, Flags 0x0
(2) Label 101070217, Flags 0x0
PSB ERO : ->
(1) Unnumbered RouterId 52.52.52.52, LinkId 1010702, Loose [1]
(2) IPv4Prefix 10.27.255.213/32, Strict [0]
(3) Unnumbered RouterId 10.27.255.219, LinkId 1010702, Strict [0]
(4) IPv4Prefix 72.72.72.72/32, Loose [0]
PSB XRO : ->
NULL XRO
PROTECTION - Flags: 0x0, E2EProtectionType: 1
LinkFlags: 0x0, SegProtFlags: 0x0, SegProtType: 0x0
ASSOCIATION - Type: 0, AssociationId: 296, Source: 52.52.52.52
NOTIFY REQ - Node: 52.52.52.52
RSB:
NextResvRefresh: 0secs, ResvRefreshTimeout: 151secs
Resv RX Message Id: 19, Epoch: 13810201, Flags: 0x1
PROTECTION - Flags: 0x0, E2EProtectionType: 1
LinkFlags: 0x0, SegProtFlags: 0x0, SegProtType: 0x0
FLOWSPEC : ->
Ctype: 6 SwitchingGranularity: 1, MTU: 9212, TlvFlags: 0x1
EthBWProfileTlv - Profile: 0, Index: 0
CIR: 10.000 Gbps, CBS: 10.000 Gbps
EIR: infinity, EBS: infinity
FILTERSPEC Label : 101070217
FILTERSPEC RRO : ->
(1) Unnumbered RouterId 52.52.52.52, InterfaceId 1010702, Flags 0x0
(2) Label 101070217, Flags 0x0
(3) Unnumbered RouterId 10.27.255.213, InterfaceId 1010702, Flags 0x0
(4) SRLG 27
(5) Label 101070217, Flags 0x80
(6) Unnumbered RouterId 10.27.255.213, InterfaceId 13000, Flags 0x0
(7) SRLG 4
(8) Label 101070230, Flags 0x0
(9) Unnumbered RouterId 10.27.255.219, InterfaceId 13001, Flags 0x0
(10) Label 101070230, Flags 0x80
(11) Unnumbered RouterId 10.27.255.219, InterfaceId 1010702, Flags 0x0
(12) SRLG 27
(13) Label 101070217, Flags 0x0
(14) Unnumbered RouterId 72.72.72.72, InterfaceId 1010702, Flags 0x0
(15) Label 101070217, Flags 0x80
NOTIFY REQ - Node: 10.27.255.213
Bound to LSPPORT: vrId: 1 Type: 0 Session: D1::2 Sender: 0.0.0.0
Num Paths Received :0
Num Paths Transmitted :1
Num Resvs Received :23
Num Resvs Transmitted :0
Num Summmary Paths Received :0
Num Summmary Paths Transmitted:1834
Num Summmary Resvs Received :1824
Num Summmary Resvs Transmitted:0
Created at 4439 (54592 secs back)
--------------------------------------------------------------------------------
Total PSB Count: 2

status

Syntax 
status
Context 
tools>dump>router>gmpls
Description 

This command dumps general GMPLS status information.

Output 

Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# status
-------------------------------------------------------------------------------
GMPLS instance vrId: 1
AdminState: UP, OperState:UP, OperDownReason: N/A
Flags: 0x0, localNodeId: 52.52.52.52
InitRetryTimeout: 30 KeepMultiplier: 3 RefreshTime: 30
RapidRetransmitTime: 5 RapidRetryLimit: 3
GrRestartTime: 180 GrRecoveryTime: 300
gLspWPOriginate: 3 gLspWPTransit: 0 gLspWPTerminate: 3
gLspPPOriginate: 0 gLspPPTransit: 0 gLspPPTerminate: 0
NumTELink: 6 NumDB: 6 NumLspPort: 6 NumTunGrp: 6
Num gLsp: 3 Num gLspPath: 3 Num Path: 4
NumLspPortAudited: 0 NumStaleLspPortDeleted: 0
-------------------------------------------------------------------------------

te-link

Syntax 
te-link [te-link-id] [detail]
Context 
tools>dump>router>gmpls
Description 

This command dumps information about TE links. Configuring the te-link-id parameter will only dump information about the specified TE link.

Parameters 
te-link-id—
The identifier of the TE link.
Values—
1 — 4294967295 | te-link-name
detail—
Keyword to output information in greater detail.
Output 

Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# te-link
<te-link-id>
1010701 1010702 1010703 1010704 1010705 1010706
detail
*A:Dut-B-UNI-C>tools>dump>router>gmpls# te-link 1010701
TE-LINK "vrId 1 TELinkId 1010701"
AdminState: UP, OperState:UP
LastChange: 02/04/2015 23:30:34
Peer: 10.27.255.213 RemoteTELinkId: 1010701 NumDbLink: 1
-------------------------------------------------------------------------------
Total TE-Link Count: 1
*A:Dut-B-UNI-C>tools>dump>router>gmpls# te-link 1010701 detail
TE-LINK "vrId 1 TELinkId 1010701"
AdminState: UP, OperState:UP
LastChange: 02/04/2015 23:30:34
Peer: 10.27.255.213 RemoteTELinkId: 1010701 NumDbLink: 1
-------------------------------------------------------------------------------
Total TE-Link Count: 1