MPLS/RSVP Show, Tools, Router, Clear, and Debug Command Reference

Command Hierarchies

Show Commands

show
— router
— mpls
bypass-tunnel [to ip-address] [protected-lsp name] [dynamic | manual | p2mp] [detail]
interface [ip-int-name | ip-address] [label-map label]
interface [ip-int-name | ip-address] statistics
label start-label [end-label | in-use | owner]
lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp {transit | terminate} [status {up | down}] [from ip-address | to ip-address | lsp-name name] [detail]
lsp count
lsp [lsp-name] activepath [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] [status {up | down}] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] mbb [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] auto-bandwidth [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] mbb
lsp-egress-stats lsp-name
lsp-egress-stats ip-address lsp lsp-name
lsp-egress-stats sender-address:lsp-name
lsp-template [lsp-template-name] [detail]
— mpls-tp
status
transit-path [path-name] [detail]
p2mp-info [type {originate | transit | terminate}] [s2l-endpoint ip-address]
p2mp-lsp [lsp-name] [detail]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] [mbb]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] s2l [s2l-name [to s2l-to-address]][status {up | down}] [detail]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] s2l [s2l-name [to s2l-to-address]] mbb
srlg-database [router-id ip-address] [interface ip-address]
srlg-group [group-name]
static-lsp [lsp-name]
static-lsp {transit | terminate}
static-lsp count
status
tp-lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail]
tp-lsp [lsp-name] path [protecting | working] [detail]
tp-lsp [lsp-name] protection
show
— router
— bfd
session {ipv4 | ipv6} detail [lag lag-id] lag-port port-id
session lsp-name Lsp Name
session lsp-rsvp {head | tail}
session src ip-address/link-local address dest ip-address | link-local address detail lsp-rsvp {head | tail} tunnel-id tunnel-id lsp-id lsp-id
session mpls-tp
session lsp-name Lsp Name [link-type {cc-only | cc-cv}] detail
session p2mp-interface interface-name detail
session src ip-address/link-local address detail lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
session [src ip-address/link-local address] [ipv4 | ipv6]
session src ip-address/link-local address dest ip-address | link-local address
session src ip-address/link-local address detail
session summary
session type type [ipv4 | ipv6]
— rsvp
interface [interface [ip-int-name]] statistics [detail]
neighbor [ip-address] [detail]
session [session-type] [from ip-address | to ip-address | lsp-name name] [status {up | down}][detail]
status
show
— test-oam
lsp-bfd local-bfd-discrim bfd-discriminator
lsp-bfd lsp-name lsp-name

Tools Commands

tools
— dump
— router
— mpls
bypass-tunnel [lsp-name] plr
ftn
ilm
te-lspinfo [endpoint ip-address] [sender ip-address] [lspid lsp-id] [detail] [p2p | p2p-tid tunnel-id]
te-lspinfo [endpoint ip-address] [sender ip-address] [lspid lsp-id] [detail] [p2p | p2p-tid tunnel-id]{ [phops] [nhops] [s2l ip-address] } }
tp-interface interface-num
— rsvp
psb
rsb
— perform
— router
— mpls
adjust-autobandwidth [lsp lsp-name [force [bandwidth mbps]]]
cspf to ip-address
force-switch-path [lsp lsp-name] [path path-name]
[no] force-switch-path [lsp lsp-name]
plr to ip-addr [from ip-addr] [bandwidth bandwidth] [include-bitmap bitmap] [exclude-bitmap bitmap] [hop-limit limit] [exclude-address excl-addr [excl-addr...(up to 8 max)]] [use-te-metric] [strict-srlg] [srlg-group grp-id...(up to 8 max)] [exclude-node excl-node-id [excl-node-id..(up to 8 max)]] [skip-interface interface-name] [ds-class-type class-type] [cspf-reqtype req-type] [least-fill-min-thd thd] [setup-priority val] [hold-priority val]
resignal {lsp lsp-name path path-name | delay minutes}
resignal {p2mp-lsp p2mp-lsp-name p2mp-instance p2mp-instance-name | p2mp-delay p2mp-minutes}
resignal-bypass {lsp bypass-lsp-name [force] | delay minutes}
revert [lsp lsp-name]
switch-path [lsp lsp-name] [path path-name]
trap-suppress number-of-traps time-interval
update-path {lsp lsp-name path current-path-name new-path new-path-name}

Router Commands

config
— router
[no] igmp
[no] tunnel-interface rsvp-p2mp lsp-name [sender ip-address]
[no] tunnel-interface rsvp-p2mp lsp-name [sender ip-address]

Clear Commands

clear
— router
— bfd
session src-ip ip-address dst-ip ip-address
session src-ip ip-address dst-ip ip-address lsp-rsvp {head | tail} tunnel-id [0..4294967295] lsp-id [0..4294967295]
session mpls-tp lsp-name path {working | protect}
session p2mp-interface interface-name
session src-ip ip-address lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
statistics src-ip ip-address dst-ip a.b.c.d
statistics all
statistics src-ip ip-address dst-ip a.b.c.d lsp-rsvp {head | tail} tunnel-id [0..4294967295] lsp-id [0..4294967295]
statistics mpls-tp lsp-name path {working | protect}
statistics p2mp-interface interface-name
statistics src-ip ip-address lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
— mpls
interface [ip-int-name] [statistics]
lsp lsp-name
lsp-autobandwidth [lsp-name]
lsp-egress-stats lsp-name
lsp-ingress-stats ip-address lsp lsp-name
lsp-ingress-stats sender-address:lsp-name
— rsvp

Debug Commands

debug
— router
mpls [lsp lsp-name] [sender source-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [interface ip-int-name]
— no mpls
[no] event
all [detail]
— no all
frr [detail]
— no frr
iom [detail]
— no iom
lsp-setup [detail]
— no lsp-setup
mbb [detail]
— no mbb
misc [detail]
— no misc
xc [detail]
— no xc
rsvp [lsp lsp-name] [sender source-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [interface ip-int-name]
— no rsvp
[no] event
all [detail]
— no all
misc [detail]
— no misc
nbr [detail]
— no nbr
path [detail]
— no path
resv [detail]
— no resv
[no] packet
all [detail]
— no all
hello [detail]
— no hello
path [detail]
— no path
patherr [detail]
— no patherr
pathtear [detail]
— no pathtear
resv [detail]
— no resv
resverr [detail]
— no resverr
resvtear [detail]
— no resvtear

Command Descriptions

Show Commands

Note:

The command outputs in this chapter are examples only; actual displays may differ depending on supported functionality and user configuration.

auto-lsp

Syntax 
auto-lsp [lsp-name] auto-bandwidth
auto-lsp [lsp-name] [status {up | down}] [detail] [to ip-address]
auto-lsp [lsp-name] [status {up | down}] {mesh-p2p | one-hop-p2p} [detail] [to ip-address]
Context 
show>router>mpls
Description 

This command displays Auto-LSP information.

Parameters 
lsp-name—
Specifies the LSP name.
Values—
80 characters max
up | down—
Specifies the state.
mesh-p2p | one-hop-p2p—
Specifies the auto LSP type.
Output 

Sample Output
*A:Dut-C# show router mpls auto-lsp
========================================================================
MPLS Auto-LSP Template
========================================================================
LSP Name Type Fastfail Admin Oper
Config State State
------------------------------------------------------------------------
meshP2pLsp3-10.20.1.6-61441 MeshP2P Yes Up Up
meshP2pLsp2-10.20.1.1-61442 MeshP2P Yes Up Up
meshP2pLsp2-10.20.1.2-61443 MeshP2P Yes Up Up
meshP2pLsp2-10.20.1.4-61444 MeshP2P Yes Up Up
meshP2pLsp2-10.20.1.5-61445 MeshP2P Yes Up Up
meshP2pLsp2-10.20.1.6-61446 MeshP2P Yes Up Up
meshP2pLsp10-10.20.1.1-61447 MeshP2P Yes Up Up
meshP2pLsp10-10.20.1.2-61448 MeshP2P Yes Up Up

bypass-tunnel

Syntax 
bypass-tunnel [to ip-address] [protected-lsp [lsp-name]] [dynamic | manual | p2mp] [detail]
Context 
show>router>mpls
Description 

If fast reroute is enabled on an LSP and the facility method is selected, instead of creating a separate LSP for every LSP that is to be backed up, a single LSP is created which serves as a backup for a set of LSPs. Such an LSP tunnel is called a bypass tunnel.

Parameters 
ip-address—
Specify the IP address of the egress router.
lsp-name—
Specify the name of the LSP protected by the bypass tunnel.
dynamic—
Displays dynamically assigned labels for bypass protection.
manual—
Displays manually assigned labels for bypass protection.
detail—
Displays detailed information.
p2mp—
Displays P2MP bypass tunnel information.
Output 

MPLS Bypass Tunnel Output Fields

Table 13 describes MPLS bypass tunnel output fields.

Table 13:  MPLS Bypass Tunnel Output Fields  

Label

Description

To

The system IP address of the egress router.

State

The LSP’s administrative state.

Out I/F

Specifies the name of the network IP interface.

Out Label

Specifies the incoming MPLS label on which to match.

Reserved BW (Kbps)

Specifies the amount of bandwidth in Mb/s reserved for the LSP.

Sample Output
*A:Dut-B# show router mpls bypass-tunnel detail
=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.4
-----------------------------------------------------------------------
To : 10.20.1.7 State : Up
Out I/F : 1/1/4 Out Label : 131071
Up Time : 0d 01:17:22 Active Time : n/a
Reserved BW : 0 Kbps Protected LSP Count : 1
Type : Dynamic
Setup Priority : 7 Hold Priority : 0
Class Type : 0
Exclude Node : 10.20.1.4 Inter-Area : True
Computed Hops :
10.10.8.2(S) Egress Admin Groups : None
-> 10.10.8.6(SA) Egress Admin Groups : None
-> 10.20.1.7(L) Egress Admin Groups : None
Actual Hops :
10.10.8.2(10.20.1.2) Record Label : N/A
-> 10.10.8.6(10.20.1.6) Record Label : 131071
-> 10.20.1.7(10.20.1.7) Record Label : 131068
-> 10.10.22.7 Record Label : 131068
=======================================================================
*A:Dut-A>config>router>mpls>lsp$ /show router mpls bypass-tunnel detail
=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.2
-----------------------------------------------------------------------
To : 10.20.1.4 State : Up
Out I/F : 1/1/2 Out Label : 131070
Up Time : 0d 00:00:18 Active Time : n/a
Reserved BW : 0 Kbps Protected LSP Count : 1
Type : Dynamic
Setup Priority : 7 Hold Priority : 0
Class Type : 0
Exclude Node : None Inter-Area : False
Computed Hops :
10.20.1.1, If Index : 3(S) Egress Admin Groups : None
-> 10.20.1.3, If Index : 2(S) Egress Admin Groups : None
-> 10.20.1.4, If Index : 5(S) Egress Admin Groups : None
Actual Hops :
10.20.1.1, If Index : 3 Record Label : N/A
-> 10.20.1.3, If Index : 2 Record Label : 131070
-> 10.20.1.4, If Index : 5 Record Label : 131070
=======================================================================
B:Dut-B>config>router>mpls>lsp# show router mpls bypass-tunnel detail
=======================================================================
MPLS Bypass Tunnels (Detail)
=======================================================================
-----------------------------------------------------------------------
bypass-node10.20.1.4
-----------------------------------------------------------------------
To : 10.10.10.6 State : Up
Out I/F : lag-1 Out Label : 131071
Up Time : 0d 00:00:06 Active Time : n/a
Reserved BW : 0 Kbps Protected LSP Count : 1
Type : Dynamic
Setup Priority : 7 Hold Priority : 0
Class Type : 0
Exclude Node : None
Actual Hops :
10.10.12.2(S) Egress Admin Groups:
lime
olive
blue
black
acqua
-> 10.10.12.3(S) Egress Admin Groups:
olive
Unknown Group 9
Unknown Group 11
black
Unknown Group 16
Unknown Group 18
-> 10.10.5.5(S) Egress Admin Groups:
purple
Unknown Group 7
Unknown Group 11
orange
acqua
Unknown Group 16
Unknown Group 19
Unknown Group 21
Unknown Group 22
Unknown Group 26
khaki
-> 10.10.10.6(S) Egress Admin Groups: None
=======================================================================:
*A:SRU4>show>router>mpls# bypass-tunnel
===============================================================================
MPLS Bypass Tunnels
===============================================================================
Legend : m - Manual d - Dynamic p - P2mp
===============================================================================
To State Out I/F Out Label Reserved Protected Type
BW (Kbps) LSP Count
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
*A:SRU4>show>router>mpls#
*A:Dut-B# show router mpls bypass-tunnel detail
==============================================================================
MPLS Bypass Tunnels (Detail)
==============================================================================
bypass-link10.10.104.4
------------------------------------------------------------------------------
To : 10.10.101.4 State : Up
Out I/F : 1/1/2:1 Out Label : 129994
Up Time : 0d 00:02:33 Active Time : n/a
Reserved BW : 0 Kbps Protected LSP Count : 1
Type : Dynamic
SetupPriority : 7 Hold Priority : 0
Class Type : 0
Actual Hops :
10.10.101.2 -> 10.10.101.4
==============================================================================
*A:Dut-B#
*A:Dut-B# show router mpls bypass-tunnel detail
==============================================================================
MPLS Bypass Tunnels (Detail)
------------------------------------------------------------------------------
bypass-link10.10.104.4
------------------------------------------------------------------------------
To : 10.10.101.4 State : Up
Out I/F : 1/1/2:1 Out Label : 129994
Up Time : 0d 00:02:33 Active Time : n/a
Reserved BW : 0 Kbps Protected LSP Count : 1
Type : Dynamic
SetupPriority : 7 Hold Priority : 0
Class Type : 0
Actual Hops :
10.10.101.2 -> 10.10.101.4
==============================================================================
*A:Dut-B#

interface

Syntax 
interface [ip-int-name | ip-address] [label-map label]
interface [ip-int-name | ip-address] statistics
Context 
show>router>mpls
Description 

This command displays MPLS interface information.

Parameters 
ip-int-name—
The name of the network IP interface. An interface name cannot be in the form of an IP address. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
ip-address—
The system or network interface IP address.
label-map label—
The MPLS label on which to match.
Values—
32 — 1048575
statistics—
Displays the MPLS interface name and the number of packets and octets sent and received on an MPLS interface.
Output 

MPLS Interface Output Fields

Table 14 describes MPLS interface output fields.

Table 14:  MPLS Interface Output Fields  

Label

Description  

Interface

The interface name.

Port-id

The port ID.

Adm

Specifies the administrative state of the interface.

Opr

Specifies the operational state of the interface.

Te-metric

Specifies the traffic engineering metric used on the interface.

Srlg Groups

Specifies the shared risk loss group (SRLG) name(s).

Interfaces

The total number of interfaces.

Transmitted

Displays the number of packets and octets transmitted from the interface.

Received

Displays the number of packets and octets received.

In Label

Specifies the ingress label.

In I/F

Specifies the ingress interface.

Out Label

Specifies the egress label.

Out I/F

Specifies the egress interface.

Next Hop

Specifies the next hop IP address for the static LSP.

Type

Specifies whether the label value is statically or dynamically assigned.

Sample Output
*A:SRU4>config>router>mpls# show router mpls interface
===============================================================================
MPLS Interfaces
===============================================================================
Interface Port-id Adm Opr TE-metric
-------------------------------------------------------------------------------
system system Up Up None
Admin Groups None
Srlg Groups None
sr4-1 1/1/4 Up Up None
Admin Groups None
Srlg Groups 3440
ess-7-1 3/2/4 Up Up None
Admin Groups None
Srlg Groups 45100
ess-7-2 3/2/5 Up Up None
Admin Groups None
Srlg Groups 45110
...
g7600 3/1/2 Up Up None
Admin Groups None
Srlg Groups 41.80
m160 3/2/1 Up Up None
Admin Groups None
Srlg Groups 420.40
-------------------------------------------------------------------------------
Interfaces : 35
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls interface "hubA"
===============================================================================
MPLS Interface : hubA
===============================================================================
Interface Port-id Adm Opr TE-metric
-------------------------------------------------------------------------------
hubA 3/2/8 Up Up None
Admin Groups None
Srlg Groups 44.200
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls interface "hubA" label-map 203
===============================================================================
MPLS Interface : hubA (Label-Map 203)
===============================================================================
In Label In I/F Out Label Out I/F Next Hop Type Adm Opr
-------------------------------------------------------------------------------
203 3/2/8 403 1/1/9 11.22.10.3 Static Up Up
-------------------------------------------------------------------------------
Interfaces : 1
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls interface statistics
===============================================================================
MPLS Interface (statistics)
===============================================================================
Interface : aps-1
Transmitted : Pkts - 76554 Octets - 7930285
Received : Pkts - 17068 Octets - 3626842
Interface : aps-2
Transmitted : Pkts - 0 Octets - 0
Received : Pkts - 1311 Octets - 219888
Interface : aps-3
Transmitted : Pkts - 0 Octets - 0
Received : Pkts - 3 Octets - 234
Interface : sr4-1
Transmitted : Pkts - 0 Octets - 0
Received : Pkts - 0 Octets - 0
Interface : ess-7-1
Transmitted : Pkts - 113537 Octets - 15058332
Received : Pkts - 13193 Octets - 1091492
Interface : ess-7-2
Transmitted : Pkts - 166133 Octets - 22762482
Received : Pkts - 16672 Octets - 1368464
Interface : ess-7-3
Transmitted : Pkts - 122934 Octets - 11033246
Received : Pkts - 12256 Octets - 1026826
...
Interface : m160
Transmitted : Pkts - 17188024 Octets - 2183076528
Received : Pkts - 677745 Octets - 59367236
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls interface
===============================================================================
MPLS Interfaces
===============================================================================
Interface Port-id Adm Opr TE-metric
-------------------------------------------------------------------------------
system system Up Up None
Admin Groups None
Srlg Groups None
aps-1 aps-1 Up Up None
Admin Groups None
Srlg Groups 3410
aps-2 aps-2 Up Up None
Admin Groups None
Srlg Groups 3420
aps-3 aps-3 Up Up None
Admin Groups None
Srlg Groups 3430
sr4-1 1/1/4 Up Up None
Admin Groups None
Srlg Groups 3440
ess-7-1 3/2/4 Up Up None
Admin Groups None
Srlg Groups 45100
ess-7-2 3/2/5 Up Up None
Admin Groups None
Srlg Groups 45110
...
g7600 3/1/2 Up Up None
Admin Groups None
Srlg Groups 41.80
m160 3/2/1 Up Up None
Admin Groups None
Srlg Groups 420.40
-------------------------------------------------------------------------------
Interfaces : 35
===============================================================================

label

Syntax 
label start-label [end-label | in-use | owner]
Context 
show>router>mpls
Description 

Displays MPLS labels exchanged.

Parameters 
start-label
The label value assigned at the ingress router.
end-label
The label value assigned for the egress router.
in-use
The number of in-use labels displayed.
Output 

MPLS Label Output Fields

Table 15 describes MPLS label output fields.

Table 15:  MPLS Label Output Fields  

Label

Description

Label

Displays the value of the label being displayed.

Label Type

Specifies whether the label value is statically or dynamically assigned.

Label Owner

The label owner.

In-use labels in entire range

The total number of labels being used by RSVP.

Sample Output
*A:mlstp-dutA# show router mpls label-range
===============================================================================
Label Ranges
===============================================================================
Label Type Start Label End Label Aging Total Available
-------------------------------------------------------------------------------
Static-lsp 32 16415 - 16364
Static-svc 16416 32799 - 16376
Dynamic 32800 131071 0 98268
===============================================================================
*A:SRU4>config>router>mpls# show router mpls label 202
=================================================================
MPLS Label 202
=================================================================
Label Label Type Label Owner
-----------------------------------------------------------------
202 static-lsp STATIC
-----------------------------------------------------------------
In-use labels in entire range : 5057
=================================================================
*A:SRU4>config>router>mpls#

label-range

Syntax 
label-range
Context 
show>router>mpls
Description 

This command displays the MPLS label range.

Output 

MPLS Label Range Output

Table 16 describes the MPLS label range output fields.

Table 16:  MPLS Label Range Output Fields  

Label

Description

Label Type

Displays the information about static-lsp, static-svc, and dynamic label types.

Start Label

The label value assigned at the ingress router.

End Label

The label value assigned for the egress router.

Aging

The number of labels released from a service which are transitioning back to the label pool. Labels are aged 15 s.

Total Available

The number of label values available.

Sample Output
*A:SRU4>config>router>mpls# show router mpls label-range
===============================================================================
Label Ranges
===============================================================================
Label Type Start Label End Label Aging Total Available
-------------------------------------------------------------------------------
Static-lsp 32 1023 - 736
Static-svc 2048 18431 - 16384
Dynamic 32768 131071 258 93232
===============================================================================
*A:SRU4>config>router>mpls#

lsp

Syntax 
lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp {transit | terminate} [status {up | down}] [from ip-address | to ip-address | lsp-name name] [detail]
lsp count
lsp [lsp-name] activepath [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] [status {up | down}] [detail] [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] mbb [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] auto-bandwidth [auto-lsp {all | mesh-p2p | one-hop-p2p}]
lsp [lsp-name] path [path-name] mbb
Context 
show>router>mpls
Description 

This command displays LSP details.

Parameters 
lsp lsp-name—
The name of the LSP used in the path.
status up
Displays an LSP that is operationally up.
status down
Displays an LSP that is operationally down.
from ip-address—
Displays the IP address of the ingress router for the LSP.
to ip-address—
Displays the IP address of the egress router for the LSP.
transit—
Displays the number of static LSPs that transit through the router.
terminate—
Displays the number of static LSPs that terminate at the router.
lsp count—
Displays the total number of LSPs.
activepath—
Displays the present path being used to forward traffic.
mbb—
Displays make-before-break (MBB) information.
detail—
Displays detailed information.
Output 

MPLS LSP Output

Table 17 describes MPLS LSP output fields.

Table 17:  MPLS LSP Output Fields  

Label

Description  

LSP Name

The name of the LSP used in the path.

To

The system IP address of the egress router for the LSP.

Adm State

Down — The path is administratively disabled.

Up — The path is administratively enabled.

Oper State

Down — The path is operationally down.

Up — The path is operationally up.

LSPs

The total number of LSPs configured.

From

The IP address of the ingress router for the LSP.

LSP Up Time

The length of time the LSP has been operational.

Transitions

The number of transitions that have occurred for the LSP.

Retry Limit

The number of attempts that the software should make to re-establish the LSP after it has failed.

Signaling

Specifies the signaling style.

Hop Limit

The maximum number of hops that an LSP can traverse, including the ingress and egress routers.

Fast Reroute/FastFail Config

enabled — Fast reroute is enabled. In the event of a failure, traffic is immediately rerouted on the pre-computed detour LSP, thus minimizing packet loss.

disabled — There is no detour LSP from each node on the primary path.

ADSPEC

enabled — The LSP will include advertising data (ADSPEC) objects in RSVP messages.

disabled — The LSP will not include advertising data (ADSPEC) objects in RSVP messages.

Primary

The preferred path for the LSP.

Secondary

The alternate path that the LSP will use if the primary path is not available.

Bandwidth

The amount of bandwidth in Mb/s reserved for the LSP path.

LSP Up Time

The total time in increments that the LSP path has been operational.

LSP Tunnel ID

The value which identifies the label switched path that is signaled for this entry.

To

The IP address of the egress router for the LSP.

LSP Down Time

The total time in increments that the LSP path has not been operational.

Path Changes

The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated.

Retry Timer

The time in s, for LSP re-establishment attempts after an LSP failure.

Resv Style

se — Specifies a shared reservation environment with a limited reservation scope. This reservation style creates a single reservation over a link that is shared by an explicit list of senders.

ff — Specifies a shared reservation environment with an explicit reservation scope. Specifies an explicit list of senders and a distinct reservation for each of them.

Negotiated MTU

The size of the maximum transmission unit (MTU) that is negotiated during establishment of the LSP.

FR Hop Limit

The total number of hops a detour LSP can take before merging back onto the main LSP path.

LastResignalAttempt

Displays the system up time when the last attempt to resignal this LSP was made.

MBB Type

Displays an enumerated integer that specifies the type of make-before-break (MBB). If none displays then there is no MBB in progress or no last MBB.

MBB State

Displays the state of the most recent invocation of the make-before-break functionality.

End at

Displays the system up time when the last MBB ended.

Old Metric

Displays the cost of the traffic engineered path for the LSP path prior to MBB.

NextRetryIn

Displays the amount of time (in s) remaining, before the next attempt is made to retry the in-progress MBB.

RetryAttempt

Displays the number attempts for the MBB is in progress.

Failure Code

Displays the reason code for in-progress MBB failure. A value of none indicates that no failure has occurred.

Failure Node

Displays the IP address of the node in the LSP path at which the in-progress MBB failed. When no failure has occurred, this value is none.

Sample Output
*A:SetupCLI# show router mpls lsp "lsp_1" path "500" detail
===============================================================================
MPLS LSP lsp_1 Path 500 (Detail)
===============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - Loose
A - ABR
===============================================================================
-------------------------------------------------------------------------------
LSP lsp_1 Path 500
-------------------------------------------------------------------------------
LSP Name : lsp_1
Path LSP ID : 38400
From : 10.10.1.1 To : 10.10.1.2
Admin State : Up Oper State : Down
Path Name : 500 Path Type : Primary
Path Admin : Up Path Oper : Down
Out Interface : n/a Out Label : n/a
Path Up Time : 0d 00:00:00 Path Down Time : 0d 00:00:43
Retry Limit : 0 Retry Timer : 30 sec
Retry Attempt : 2 Next Retry In : 19 sec
BFD Template : None BFD Ping Interval : 60
BFD Enable : FALSE
Adspec : Disabled Oper Adspec : N/A
CSPF : Disabled Oper CSPF : N/A
Least Fill : Disabled Oper LeastFill : N/A
FRR : Disabled Oper FRR : N/A
Prop Adm Grp : Disabled Oper Prop AG : N/A
Inter-area : N/A
Neg MTU : 0 Oper MTU : N/A
Bandwidth : No Reservation Oper Bw : N/A
Hop Limit : 255 Oper HopLimit : N/A
Record Route : Record Oper Rec Route : N/A
Record Label : No Record Oper Rec Label : N/A
Setup Priority : 7 Oper Setup Priority : N/A
Hold Priority : 7 Oper Hold Priority : N/A
Class Type : 7 Oper CT : N/A
Backup CT : 5
MainCT Retry : 500
Rem :
MainCT Retry : 500
Limit :
Include Grps : Oper InclGrps :
None N/A
Exclude Grps : Oper ExclGrps :
None N/A
Adaptive : Enabled Oper Metric : N/A
Preference : n/a
Path Trans : 0 CSPF Queries : 0
Failure Code : noResourcesAvailable
Failure Node : 9.1.255.255
Explicit Hops :
No Hops Specified
Actual Hops :
No Hops Specified
Resignal Eligible: False
Last Resignal : n/a CSPF Metric : N/A
===============================================================================
*A:Dut-A>config>router>mpls>lsp$ /show router mpls lsp "1" path detail
=======================================================================
MPLS LSP 1 Path (Detail)
=======================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - Loose
A - ABR
=======================================================================
-----------------------------------------------------------------------
LSP 1 Path 1
-----------------------------------------------------------------------
LSP Name : 1 Path LSP ID : 30208
From : 10.20.1.1 To : 10.20.1.6
Adm State : Up Oper State : Up
Path Name : 1 Path Type : Primary
Path Admin : Up Path Oper : Up
OutInterface: 1/1/1 Out Label : 131071
Path Up Time: 0d 00:00:05 Path Dn Time: 0d 00:00:00
Retry Limit : 0 Retry Timer : 30 sec
RetryAttempt: 0 NextRetryIn : 0 sec
Adspec : Disabled Oper Adspec : Disabled
CSPF : Enabled Oper CSPF : Enabled
Least Fill : Disabled Oper LeastF*: Disabled
FRR : Enabled Oper FRR : Enabled
FRR NodePro*: Enabled Oper FRR NP : Enabled
FR Hop Limit: 16 Oper FRHopL*: 16
FR Prop Adm*: Disabled Oper FRProp*: Disabled
Prop Adm Grp: Disabled Oper PropAG : Disabled
Inter-area : False
Neg MTU : 1496 Oper MTU : 1496
Bandwidth : No Reservation Oper Bw : 0 Mbps
Hop Limit : 255 Oper HopLim*: 255
Record Route: Record Oper RecRou*: Record
Record Label: Record Oper RecLab*: Record
SetupPriori*: 7 Oper SetupP*: 7
Hold Priori*: 0 Oper HoldPr*: 0
Class Type : 0 Oper CT : 0
Backup CT : None
MainCT Retry: n/a
Rem :
MainCT Retry: 0
Limit :
Include Grps: Oper InclGr*:
None None
Exclude Grps: Oper ExclGr*:
None None
Adaptive : Enabled Oper Metric : 3000
Preference : n/a
Path Trans : 1 CSPF Queries: 1
Failure Code: noError Failure Node: n/a
ExplicitHops:
No Hops Specified
Actual Hops :
10.20.1.1, If Index : 2 @ n Record Label : N/A
-> 10.20.1.2, If Index : 2 @ n Record Label : 131071
-> 10.20.1.4, If Index : 2 Record Label : 131071
-> 10.20.1.6, If Index : 2 Record Label : 131071
ComputedHops:
10.20.1.1, If Index : 2(S)
-> 10.20.1.2, If Index : 2(S)
-> 10.20.1.4, If Index : 2(S)
-> 10.20.1.6, If Index : 2(S)
ResigEligib*: False
LastResignal: n/a CSPF Metric : 3000
=======================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-C# show router mpls lsp detail
=======================================================================
MPLS LSPs (Originating) (Detail)
=======================================================================
-----------------------------------------------------------------------
Type : Originating
-----------------------------------------------------------------------
LSP Name : to_D_10.20.1.4_viaBD
LSP Type : RegularLsp LSP Tunnel ID : 1
From : 10.20.1.3 To : 10.20.1.4
Adm State : Up Oper State : Up
LSP Up Time : 0d 00:05:38 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 1
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 1500
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
CSPF : Enabled ADSPEC : Disabled
Metric : 0 Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Auto BW : Disabled
LdpOverRsvp : Enabled VprnAutoBind : Enabled
IGP Shortcut: Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : -1
BGPTransTun : Enabled
Oper Metric : 20
Prop Adm Grp: Disabled
Primary(a) : to_D_10.20.1.4_viaBD Up Time : 0d 00:05:38
Bandwidth : 0 Mbps
=======================================================================
*A:Dut-C#
*A:Dut-C# show router mpls lsp "lspE" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : lspE
LSP Type : RegularLsp LSP Tunnel ID : 1005
LSP Index : 1005 TTM Tunnel Id : 1005
From : 10.20.1.3 To : 10.20.1.5
Adm State : Up Oper State : Up
LSP Up Time : 0d 00:19:23 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 1
Retry Limit : 0 Retry Timer : 20 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 1500
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
CSPF : Disabled ADSPEC : Disabled
Metric : N/A
Load Bal Wt : N/A ClassForwarding: Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
BFD Template: None BFD Ping Intvl : 60
BFD Enable : False
Revert Timer: Disabled Next Revert In : N/A
EntropyLbl : Inherited Oper EntropyLbl: Enabled
Auto BW : Disabled
LdpOverRsvp : Enabled
VprnAutoBind: Enabled
IGP Shortcut: Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
BGPTransTun : Enabled
Oper Metric : 16777215
Prop Adm Grp: Disabled
Primary(a) : E1 Up Time : 0d 00:19:32
Bandwidth : 0 Mbps
Standby : E2 Down Time : 0d 00:19:46
Bandwidth : 0 Mbps
===============================================================================
A:sim1>config>router>mpls>lsp$ show router mpls lsp path detail
========================================================================
MPLS LSP Path (Detail)
===============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - Loose
========================================================================
------------------------------------------------------------------------
LSP l1 Path 1
------------------------------------------------------------------------
LSP Name : l1 Path LSP ID : 30208
From : 10.20.1.1 To : 10.20.1.3
Adm State : Up Oper State : Down
Path Name : 1 Path Type :
Primary
Path Admin : Up Path Oper : Down
OutInterface: n/a Out Label : n/a
Path Up Time: 0d 00:00:00 Path Dn Time: 0d 00:00:02
Retry Limit : 0 Retry Timer : 30 sec
RetryAttempt: 0 NextRetryIn : 7 sec (Fast)
SetupPriori*: 7 Hold Priori*: 0
Preference : n/a
Bandwidth : No Reservation Oper Bw : 0 Mbps
Hop Limit : 255 Class Type : 0
Backup CT : None
MainCT Retry: n/a MainCT Retry: 0
Rem : Limit :
Oper CT : None
Record Route: Record Record Label: Record
Oper MTU : 0 Neg MTU : 0
Adaptive : Enabled Oper Metric : 65535
Include Grps: Exclude Grps:
None None
Path Trans : 2 CSPF Queries: 0
Failure Code: noError Failure Node: n/a
ExplicitHops:
10.20.1.2(S)
Actual Hops :
No Hops Specified
ResigEligib*: False
LastResignal: n/a CSPF Metric : 0
========================================================================
*A:SRU4>config>router>mpls# show router mpls lsp path
===============================================================================
MPLS LSP Path (Detail)
===============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - loose
===============================================================================
ExplicitHops:
10.20.1.3(L) -> 10.20.1.4(S)
Actual Hops :
10.10.1.1(10.20.1.1) Record Label : N/A
-> 10.10.1.2(10.20.1.2) Record Label : 131071
-> 10.10.5.3(10.20.1.3) Record Label : 131071
-> 10.10.7.4(10.20.1.4) Record Label : 131071
-> 10.10.8.5(10.20.1.5) Record Label : 131071
ComputedHops:
10.10.1.1(S) -> 10.10.1.2(S) -> 10.10.5.3(S)
-> 10.20.1.4(S) -> 10.20.1.5(L)
===============================================================================
*A:SRU4>config>router>mpls# show router mpls lsp
===============================================================================
MPLS LSPs (Originating)
===============================================================================
LSP Name To Fastfail Adm Opr
Config
-------------------------------------------------------------------------------
to_110_20_1_1_cspf 110.20.1.1 No Up Up
to_110_20_1_2_cspf 110.20.1.2 No Up Dwn
to_110_20_1_3_cspf 110.20.1.3 No Up Up
to_110_20_1_4_cspf 110.20.1.4 No Up Dwn
to_110_20_1_5_cspf 110.20.1.5 No Up Up
to_110_20_1_6_cspf 110.20.1.6 No Up Dwn
to_110_20_1_110_cspf 110.20.1.110 No Up Up
to_10_8_100_15_cspf 10.8.100.15 No Up Dwn
to_10_20_1_20_cspf 10.20.1.20 No Up Up
to_10_20_1_22_cspf 10.20.1.22 No Up Up
to_10_100_1_1_cspf 10.100.1.1 No Up Dwn
to_110_20_1_1_cspf_2 110.20.1.1 No Up Up
to_110_20_1_1_cspf_3 110.20.1.1 No Up Up
to_110_20_1_1_cspf_4 110.20.1.1 No Up Up
to_110_20_1_1_cspf_5 110.20.1.1 No Up Up
to_110_20_1_1_cspf_6 110.20.1.1 No Up Up
to_110_20_1_1_cspf_7 110.20.1.1 No Up Up
to_110_20_1_1_cspf_8 110.20.1.1 No Up Up
to_110_20_1_1_cspf_9 110.20.1.1 No Up Up
to_110_20_1_1_cspf_10 110.20.1.1 No Up Up
to_110_20_1_1_cspf_11 110.20.1.1 No Up Up
to_110_20_1_1_cspf_12 110.20.1.1 No Up Up
to_110_20_1_1_cspf_13 110.20.1.1 No Up Up
to_110_20_1_1_cspf_14 110.20.1.1 No Up Up
to_110_20_1_1_cspf_15 110.20.1.1 No Up Up
...
-------------------------------------------------------------------------------
LSPs : 201
===============================================================================
*A:SRU4>config>router>mpls#
Table 18:  LSP Detail Output Fields  

Label

Description 

Auto BW

Enabled — Auto-bandwidth adjustment is configured on this LSP.

AB OpState

Up – Auto-bandwidth is operationally enabled on this LSP

Down – Auto-bandwidth is operationally disabled on this LSP

Auto BW Min

The minimum bandwidth of the LSP that auto-bandwidth can request (in Mb/s).

Auto BW Max

The maximum bandwidth of the LSP that auto-bandwidth can request (in Mb/s).

AB Up Thresh

The percent threshold for increasing LSP bandwidth.

AB Down Thresh

The percent threshold for decreasing LSP bandwidth.

AB Up BW

The absolute bandwidth threshold for increasing LSP bandwidth (in Mb/s).

AB Down BW

The absolute bandwidth threshold for decreasing LSP bandwidth (in Mb/s).

AB Coll Intv

The auto-bandwidth collection interval.

AB Adj Mul

The adjust-multiplier for this LSP (may be configured or inherited).

AB Samp Mul

The sample-multiplier for this LSP (may be configured or inherited).

AB Adj Time

The adjust-multiplier times the collection-interval (in min).

AB Sample Time

The sample-multiplier times the collection-interval (in min).

AB Adj Cnt

The adjust count (number of whole collection intervals since the start of the current adjust interval).

AB Samp Cnt

The sample count (number of whole collection intervals since the start of the current sample interval).

AB Last Adj

The system time of the last auto-bandwidth adjustment.

AB Next Adj

The approximate remaining time in the current adjust interval (adjust-multiplier – adjust count) times the collection interval (in min). This overstates the actual remaining time because the elapsed time in the current collection interval is not accounted for.

AB Adj Cause

The cause of the last auto-bandwidth adjustment:

  1. none – no adjustment has occurred
  2. manual
  3. adj-count
  4. overflow

AB Max AvgR*

The maximum average data rate in any sample interval of the current adjust interval.

AB Lst AvgR*

The average data rate measured in the sample interval that ended most recently.

AB Ovfl Lmt

The configured value of the auto-bandwidth overflow-limit.

AB Ovfl Cnt

The number of overflow samples since the last reset.

ABOvflThres

The percent threshold for declaring an overflow sample.

AB Ovfl BW

The absolute bandwidth threshold for declaring an overflow sample (in Mb/s).

AB Monitor BW

True – monitor bandwidth is enabled on the LSP.

False – monitor bandwidth is not enabled on the LSP.

*A:SRU4>config>router>mpls# show router mpls lsp "to_110_20_1_1_cspf"
===============================================================================
MPLS LSPs (Originating)
===============================================================================
LSP Name To Fastfail Adm Opr
Config
-------------------------------------------------------------------------------
to_110_20_1_1_cspf 110.20.1.1 No Up Up
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls lsp "to_110_20_1_1_cspf" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : to_110_20_1_1_cspf
LSP Type : RegularLsp LSP Tunnel ID : 1
From : 110.20.1.4
Adm State : Up Oper State : Up
LSP Up Time : 0d 01:47:02 LSP Down Time : 0d 00:00:00
Transitions : 11 Path Changes : 11
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 1500
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
CSPF : Enabled ADSPEC : Disabled
Metric : 0 Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
LdpOverRsvp : Enabled VprnAutoBind : Enabled
IGP Shortcut: Enabled
Oper Metric : 1001
Primary(a) : to_110_20_1_1 Up Time : 0d 01:47:02
Bandwidth : 0 Mbps
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls lsp detail to 110.20.1.2
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : 1
LSP Type : RegularLsp LSP Tunnel ID : 1
From : 0.0.0.0
Adm State : Down Oper State : Down
LSP Up Time : 0d 00:00:00 LSP Down Time : 0d 00:00:07
Transitions : 0 Path Changes : 0
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 0
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
CSPF : Disabled ADSPEC : Disabled
Metric : 0
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Auto BW : Enabled AB OpState : Down
Auto BW Min : 0 Mbps Auto BW Max : 100000 Mbps
AB Up Thresh: 5 percent AB Down Thresh : 5 percent
AB Up BW : 0 Mbps AB Down BW : 0 Mbps
AB Curr BW : 0 Mbps AB Samp Intv : 0
AB Adj Mul : 288+ AB Samp Mul : 1+
AB Adj Time : 0 Mins AB Samp Time : 0 Mins
AB Adj Cnt : 0 AB Samp Cnt : 0
AB Last Adj : n/a AB Next Adj : 0 Mins
ABMaxAvgRt : 0 Mbps AB Lst AvgRt : 0 Mbps
AB Ovfl Lmt : 0 AB Ovfl Cnt : 0
ABOvflThres : 0 percent AB Ovfl BW : 0
AB Adj Cause: none AB Monitor BW : False
LdpOverRsvp : Enabled VprnAutoBind : Enabled
IGP Shortcut: Enabled
Oper Metric : 65535
+ indicates inherited values
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls lsp count
===============================================================================
MPLS LSP Count
===============================================================================
Originate Transit Terminate
-------------------------------------------------------------------------------
Static LSPs 0 136 0
Dynamic LSPs 140 421 1620
Detour LSPs 0 0 0
P2MP S2Ls 0 0 0
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls lsp path mbb
===============================================================================
MPLS LSP Paths
===============================================================================
-------------------------------------------------------------------------------
LSP to_110_20_1_1_cspf Path to_110_20_1_1
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 1001
Last MBB :
MBB Type : TimerBasedResignal MBB State : Fail
Ended At : 03/04/2010 09:23:58 Old Metric : 0
-------------------------------------------------------------------------------
LSP to_110_20_1_2_cspf Path to_110_20_1_2
-------------------------------------------------------------------------------
LastResignal: 03/04/2010 09:23:58 CSPF Metric : 65535
-------------------------------------------------------------------------------
LSP to_110_20_1_3_cspf Path to_110_20_1_3
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 1001
Last MBB :
MBB Type : TimerBasedResignal MBB State : Fail
Ended At : 03/04/2010 09:23:58 Old Metric : 0
-------------------------------------------------------------------------------
LSP to_110_20_1_4_cspf Path to_110_20_1_4
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_110_20_1_5_cspf Path to_110_20_1_5
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_10_100_1_1_cspf_19 Path to_10_100_1_1
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 0
-------------------------------------------------------------------------------
LSP to_10_100_1_1_cspf_20 Path to_10_100_1_1
-------------------------------------------------------------------------------
LastResignal: n/a CSPF Metric : 0
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls lsp transit
===============================================================================
MPLS LSPs (Transit)
===============================================================================
Legend : @ - Active Detour
===============================================================================
From To In I/F Out I/F State LSP Name
-------------------------------------------------------------------------------
110.20.1.5 10.20.1.22 3/2/1 3/2/7 Up to_10_20_1_22_cspf::to*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_3::*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_4::*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_2::*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_20:*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_18:*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_19:*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_17:*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_16:*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_15:*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_13:*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_14:*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_12:*
110.20.1.5 10.20.1.20 3/2/7 3/2/1 Up to_10_20_1_20_cspf_10:*
...
110.20.1.3 10.20.1.22 aps-1 3/2/7 Up to_10_20_1_22_cspf_6::*
110.20.1.3 10.20.1.22 aps-1 3/2/7 Up to_10_20_1_22_cspf::to*
110.20.1.3 10.20.1.22 aps-1 3/2/7 Up to_10_20_1_22_cspf_9::*
-------------------------------------------------------------------------------
LSPs : 520
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls lsp terminate
===============================================================================
MPLS LSPs (Terminate)
===============================================================================
Legend : @ - Active Detour
===============================================================================
From To In I/F Out I/F State LSP Name
-------------------------------------------------------------------------------
110.20.1.5 110.20.1.4 3/2/1 n/a Up b4-1::b4-1
110.20.1.5 110.20.1.4 3/2/7 n/a Up gsr::gsr
10.20.1.22 110.20.1.4 3/2/7 n/a Up gsr2_t10
110.20.1.6 110.20.1.4 3/2/3:10 n/a Up 1::2
110.20.1.6 110.20.1.4 3/2/3:3 n/a Up 1::stby
110.20.1.6 110.20.1.4 3/2/3:10 n/a Up 2::2
110.20.1.6 110.20.1.4 3/2/3:6 n/a Up 2::stby
110.20.1.6 110.20.1.4 3/2/3:10 n/a Up 3::2
110.20.1.6 110.20.1.4 3/2/3:6 n/a Up 3::stby
...
110.20.1.3 110.20.1.4 aps-1 n/a Up to_110_20_1_4_cspf_20:*
110.20.1.3 110.20.1.4 aps-1 n/a Up to_110_20_1_4_cspf_4::*
-------------------------------------------------------------------------------
LSPs : 1603
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls lsp terminate detail
===============================================================================
MPLS LSPs (Terminate) (Detail)
===============================================================================
-------------------------------------------------------------------------------
LSP b4-1::b4-1
-------------------------------------------------------------------------------
From : 110.20.1.5 To : 110.20.1.4
State : Up
SetupPriority : 7 Hold Priority : 0
Class Type : 0
In Interface : 3/2/1 In Label : 131071
Previous Hop : 10.100.30.20
-------------------------------------------------------------------------------
LSP gsr::gsr
-------------------------------------------------------------------------------
From : 110.20.1.5 To : 110.20.1.4
State : Up
SetupPriority : 7 Hold Priority : 0
Class Type : 0
In Interface : 3/2/7 In Label : 128547
Previous Hop : 160.60.60.2
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
From : 110.20.1.3 To : 110.20.1.4
State : Up
SetupPriority : 7 Hold Priority : 0
Class Type : 0
In Interface : aps-1 In Label : 130409
Previous Hop : 104.104.0.3
===============================================================================
*A:SRU4>config>router>mpls#
*A:Dut-C>config>router>mpls>lsp# show router mpls lsp "N1.N2.3" detail
===============================================================================
MPLS LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : N1.N2.3
LSP Type : RegularLsp LSP Tunnel ID : 132
From : 1.0.0.1 To : 1.0.0.2
Adm State : Up Oper State : Up
LSP Up Time : 0d 00:01:07 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 2
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : 1500
Adaptive : Enabled ClassType : 0
FastReroute : Disabled Oper FR : Disabled
CSPF : Enabled ADSPEC : Disabled
Metric : 9 Use TE metric : Disabled
Load Balanc*: 100
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Revert Timer: Disabled Next Revert In : N/A
Auto BW : Disabled
LdpOverRsvp : Enabled VprnAutoBind : Enabled
IGP Shortcut: Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
BGPTransTun : Enabled
Oper Metric : 9
Prop Adm Grp: Disabled
Primary(a) : path.N1.N2.3 Up Time : 0d 00:01:04
Bandwidth : 0 Mbps
Secondary : path.N1.N2.4 Down Time : 0d 00:01:00
Bandwidth : 0 Mbps
===============================================================================
*A:SetupCLI# show router mpls lsp "lsp_1" path "500" detail
===============================================================================
MPLS LSP lsp_1 Path 500 (Detail)
===============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - Loose
A - ABR
===============================================================================
-------------------------------------------------------------------------------
LSP lsp_1 Path 500
-------------------------------------------------------------------------------
LSP Name : lsp_1
Path LSP ID : 38400
From : 10.10.1.1 To : 10.10.1.2
Admin State : Up Oper State : Down
Path Name : 500 Path Type : Primary
Path Admin : Up Path Oper : Down
Out Interface : n/a Out Label : n/a
Path Up Time : 0d 00:00:00 Path Down Time : 0d 00:00:43
Retry Limit : 0 Retry Timer : 30 sec
Retry Attempt : 2 Next Retry In : 19 sec
BFD Template : None BFD Ping Interval : 60
BFD Enable : FALSE
Adspec : Disabled Oper Adspec : N/A
CSPF : Disabled Oper CSPF : N/A
Least Fill : Disabled Oper LeastFill : N/A
FRR : Disabled Oper FRR : N/A
Prop Adm Grp : Disabled Oper Prop AG : N/A
Inter-area : N/A
Neg MTU : 0 Oper MTU : N/A
Bandwidth : No Reservation Oper Bw : N/A
Hop Limit : 255 Oper HopLimit : N/A
Record Route : Record Oper Rec Route : N/A
Record Label : No Record Oper Rec Label : N/A
Setup Priority : 7 Oper Setup Priority : N/A
Hold Priority : 7 Oper Hold Priority : N/A
Class Type : 7 Oper CT : N/A
Backup CT : 5
MainCT Retry : 500
Rem :
MainCT Retry : 500
Limit :
Include Grps : Oper InclGrps :
None N/A
Exclude Grps : Oper ExclGrps :
None N/A
Adaptive : Enabled Oper Metric : N/A
Preference : n/a
Path Trans : 0 CSPF Queries : 0
Failure Code : noResourcesAvailable
Failure Node : 9.1.255.255
Explicit Hops :
No Hops Specified
Actual Hops :
No Hops Specified
Resignal Eligible: False
Last Resignal : n/a CSPF Metric : N/A
===============================================================================
*A:Dut-B# show router mpls lsp path detail tof1
==============================================================================
MPLS LSP tof1 Path (Detail)
==============================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
------------------------------------------------------------------------------
LSP tof1 Path 1
------------------------------------------------------------------------------
LSP Name : tof1 Path LSP ID : 4706
From : 10.20.1.2 To : 10.20.1.4
Adm State : Up Oper State : Up
Path Name : 1 Path Type : Primary
Path Admin : Up Path Oper : Up
OutInterface: 1/1/2:5 Out Label : 124809
Path Up Time: 0d 00:01:16 Path Dn Time: 0d 00:00:00
Retry Limit : 0 Retry Timer : 20 sec
RetryAttempt: 0 NextRetryIn : 0 sec
SetupPriori*: 4 Hold Priori*: 4
Bandwidth : 1 Mbps Oper Bw : 1 Mbps
Hop Limit : 255 Class Type : 5
Record Route: Record Record Label: Record
Oper MTU : 1492 Neg MTU : 1492
Adaptive : Enabled Oper Metric : 1000
Include Grps: Exclude Grps:
None None
Path Trans : 2 CSPF Queries: 1
Failure Code: noError Failure Node: n/a
ExplicitHops:
10.20.1.4
Actual Hops :
10.10.105.2(10.20.1.2) @ s Record Label : N/A
-> 10.10.105.4(10.20.1.4) Record Label : 124809
ComputedHops:
10.10.105.2 -> 10.10.105.4
ResigEligib*: False
LastResignal: n/a CSPF Metric : 1000
In Prog MBB :
MBB Type : SoftPreemption NextRetryIn : 19 sec
Started At : 12/08/2008 22:21:11 RetryAttempt: 0
FailureCode: noError Failure Node: n/a
==============================================================================
*A:Dut-B#

lsp-egress-stats

Syntax 
lsp-egress-stats
lsp-egress-stats lsp-name
Context 
show>router>mpls
Description 

This command displays MPLS LSP egress statistics information.

Output 

Sample Output
*A:Dut-C>config>router>mpls>lsp$ show router mpls lsp-egress-stats lsp "1"
=================================================================
MPLS LSP Egress Statistics
=================================================================
-----------------------------------------------------------------
LSP Name : 1
-----------------------------------------------------------------
Collect Stats : Enabled Accting Plcy. : Default
Adm State : Up PSB Match : True
FC BE
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC AF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC H2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC EF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC H1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC NC
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
=================================================================
*A:Dut-C# show router mpls lsp-egress-stats lsp "ipmsi-1-73728"
=================================================================
MPLS LSP Egress Statistics
=================================================================
-----------------------------------------------------------------
LSP Name : ipmsi-1-73728
-----------------------------------------------------------------
Collect Stats : Enabled Accting Plcy. : Default
Adm State : Up PSB Match : True
FC BE
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC AF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC H2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC EF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC H1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC NC
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
=================================================================

lsp-ingress-stats

Syntax 
lsp-ingress-stats
lsp-ingress-stats ip-address lsp lsp-name
Context 
show>router>mpls
Description 

This command displays MPLS LSP ingress statistics information.

Output 

Sample Output
*A:Dut-A# show router mpls lsp-ingress-stats lsp "1" sender 10.20.1.3
=================================================================
MPLS LSP Ingress Statistics
=================================================================
-----------------------------------------------------------------
LSP Name : 1
Sender : 10.20.1.3
-----------------------------------------------------------------
Collect Stats : Disabled Accting Plcy. : None
Adm State : Up PSB Match : True
FC BE
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC AF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC H2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC EF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC H1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC NC
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
=================================================================
*A:Dut-A# show router mpls lsp-ingress-stats lsp "ipmsi-1-73728" sender 10.20.1.3
=======================================================================
MPLS LSP Ingress Statistics
=======================================================================
-----------------------------------------------------------------------
LSP Name : ipmsi-1-73728
Sender : 10.20.1.3
-----------------------------------------------------------------------
Collect Stats : Disabled Accting Plcy. : None
Adm State : Up PSB Match : True
FC BE
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC AF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC H2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC EF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC H1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC NC
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
=======================================================================
*A:Dut-A>config>router>mpls>ingr-stats# show router mpls lsp-ingress-stats
type p2mp active template-match
=======================================================================
MPLS LSP Ingress Statistics
=======================================================================
-----------------------------------------------------------------------
LSP Name : ipmsi-1-73728
Sender : 10.20.1.3
-----------------------------------------------------------------------
Collect Stats : Disabled Accting Plcy. : None
Adm State : Up PSB Match : True
FC BE
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC AF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC L1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC H2
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC EF
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC H1
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
FC NC
InProf Pkts : 0 OutProf Pkts : 0
InProf Octets : 0 OutProf Octets: 0
-----------------------------------------------------------------------
LSP Statistics : 1

lsp-template

Syntax 
lsp-template [lsp-template-name] [detail]
Context 
show>router>mpls
Description 

This command displays MPLS LSP template information.

Output 

Sample Output
*A:Dut-C# show router mpls lsp-template detail
========================================================================
MPLS LSP Templates (Detail)
========================================================================
------------------------------------------------------------------------
LSP Template : ipmsi
------------------------------------------------------------------------
Type : P2MP Admin State : Up
Default Path : path_ipmsi Adaptive : Enabled
Bandwidth : 0 Mbps Hop Limit : 255
CSPF : Enabled Use TE metric : Disabled
Include Groups : Exclude Groups :
None None
FastReroute : Enabled
FR Method : Facility FR Hop Limit : 16
Record Route : Record Record Label : Record
Retry Limit : 0 Retry Timer : 30 sec
LSP Count : 3 Ref Count : 3
========================================================================

oam-template

Syntax 
oam-template
Context 
show>router>mpls>mpls-tp
Description 

This command displays MPLS-TP OAM template information.

Output 

Sample Output
*A:mlstp-dutA# show router mpls mpls-tp oam-template
===============================================================================
MPLS-TP OAM Templates
===============================================================================
Template Name : privatebed-oam-template Router ID : 1
BFD Template : privatebed-bfd-template Hold-Down Time: 0 centiseconds
Hold-Up Time : 20 deciseconds
===============================================================================

protection-template

Syntax 
protection-template
Context 
show>router>mpls>mpls-tp
Description 

This command displays MPLS-TP protection template information.

Output 

Sample Output
*A:mlstp-dutA# show router mpls mpls-tp protection-template
===============================================================================
MPLS-TP Protection Templates
===============================================================================
Template Name : privatebed-protection-template Router ID : 1
Protection Mode: one2one Direction : bidirectional
Revertive : revertive Wait-to-Restore: 300sec
Rapid-PSC-Timer: 10ms Slow-PSC-Timer : 5sec
===============================================================================

status

Syntax 
status
Context 
show>router>mpls>mpls-tp
Description 

This command displays MPLS-TP system configuration information.

Output 

Sample Output
*A:mlstp-dutA# show router mpls mpls-tp status
===============================================================================
MPLS-TP Status
===============================================================================
Admin Status : Up
Global ID : 42 Node ID : 0.0.3.233
Tunnel Id Min : 1 Tunnel Id Max : 4096
===============================================================================

transit-path

Syntax 
transit-path [path-name] [detail]
Context 
show>router>mpls>mpls-tp
Description 

This command displays MPLS-TP tunnel information.

Parameters 
path-name—
Specifies the path name, up to 32 characters max.
Output 

Sample Output
A:mplstp-dutC# show router mpls mpls-tp transit-path
<path-name>
"tp-32" "tp-33" "tp-34" "tp-35" "tp-36" "tp-37" "tp-38" "tp-39"
"tp-40" "tp-41"
detail
A:mplstp-dutC# show router mpls mpls-tp transit-path "tp-32"
===============================================================================
MPLS-TP Transit tp-32 Path Information
===============================================================================
Path Name : tp-32
Admin State : Up Oper State : Up
------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F
------------------------------------------------------------------
FP 2080 2081 CtoB_1
RP 2081 2080 CtoA_1
===============================================================================
A:mplstp-dutC# show router mpls mpls-tp transit-path "tp-32" detail
===============================================================================
MPLS-TP Transit tp-32 Path Information (Detail)
===============================================================================
Path Name : tp-32
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path ID configuration
Src Global ID : 42 Dst Global ID : 42
Src Node ID : 0.0.3.234 Dst Node ID : 0.0.3.233
LSP Number : 2 Dst Tunnel Num: 32
Forward Path configuration
In Label : 2080 Out Label : 2081
Out Interface : CtoB_1 Next Hop Addr : n/a
Reverse Path configuration
In Label : 2081 Out Label : 2080
Out Interface : CtoA_1 Next Hop Addr : n/a
===============================================================================
A:mplstp-dutC#

p2mp-info

Syntax 
p2mp-info [type {originate | transit | terminate}] [s2l-endpoint ip-address]
Context 
show>router>mpls
Description 

This command displays P2MP cross-connect information.

Parameters 
type—
Specifies the P2MP type.
Values—
originate — Specifies to display the static LSPs that originate at this virtual router. transit — Specifies to display the static LSPs that transit through this virtual router. terminate — Specifies to display the static LSPs that terminate at this virtual router.
Output 

Sample Output
*A:Dut-C# show router mpls p2mp-info
========================================================================
MPLS P2MP Cross Connect Information
========================================================================
------------------------------------------------------------------------
S2L ipmsi-4000-73729::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.1 Tunnel ID : 61441
P2MP ID : 4000 Lsp ID : 29696
S2L Name : ipmsi-4000-73729::pa* To : 10.20.1.3
In Interface : 1/1/1 In Label : 262129
Num. of S2ls : 1
------------------------------------------------------------------------
S2L ipmsi-65535-73730::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.1 Tunnel ID : 61442
P2MP ID : 65535 Lsp ID : 30208
S2L Name : ipmsi-65535-73730::p* To : 10.20.1.3
In Interface : 1/1/1 In Label : 262128
Num. of S2ls : 1
------------------------------------------------------------------------
S2L ipmsi-1001-73728::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.1 Tunnel ID : 61440
P2MP ID : 1001 Lsp ID : 35840
S2L Name : ipmsi-1001-73728::pa* To : 10.20.1.3
In Interface : 1/1/1 In Label : 262127
Num. of S2ls : 1
------------------------------------------------------------------------
S2L ipmsi-1001-73732::path_ipmsi
-----------------------------------------------------------------------
Source IP Address : 10.20.1.2 Tunnel ID : 64944
P2MP ID : 1001 Lsp ID : 34816
S2L Name : ipmsi-1001-73732::pa* To : 10.20.1.3
In Interface : 1/1/2 In Label : 262114
Num. of S2ls : 1
------------------------------------------------------------------------
S2L ipmsi-4000-73729::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.3 Tunnel ID : 61441
P2MP ID : 4000 Lsp ID : 16384
S2L Name : ipmsi-4000-73729::pa* To : 10.20.1.1
Out Interface : 1/1/1 Out Label : 262131
Num. of S2ls : 1
------------------------------------------------------------------------
S2L ipmsi-4000-73729::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.3 Tunnel ID : 61441
P2MP ID : 4000 Lsp ID : 16384
S2L Name : ipmsi-4000-73729::pa* To : 10.20.1.4
Out Interface : 2/1/1 Out Label : 262121
Num. of S2ls : 1
------------------------------------------------------------------------
S2L ipmsi-1001-73728::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.3 Tunnel ID : 61440
P2MP ID : 1001 Lsp ID : 22016
S2L Name : ipmsi-1001-73728::pa* To : 10.20.1.1
Out Interface : 1/1/1 Out Label : 262129
Num. of S2ls : 1
------------------------------------------------------------------------
S2L ipmsi-1001-73728::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.3 Tunnel ID : 61440
P2MP ID : 1001 Lsp ID : 22016
S2L Name : ipmsi-1001-73728::pa* To : 10.20.1.2
Out Interface : 1/1/2 Out Label : 262115
Num. of S2ls : 1
------------------------------------------------------------------------
S2L ipmsi-1001-73728::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.3 Tunnel ID : 61440
P2MP ID : 1001 Lsp ID : 22016
S2L Name : ipmsi-1001-73728::pa* To : 10.20.1.4
Out Interface : 2/1/1 Out Label : 262108
Num. of S2ls : 2
------------------------------------------------------------------------
S2L ipmsi-1001-73728::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.3 Tunnel ID : 61440
P2MP ID : 1001 Lsp ID : 22016
S2L Name : ipmsi-1001-73728::pa* To : 10.20.1.5
Out Interface : 2/1/1 Out Label : 262108
Num. of S2ls : 2
------------------------------------------------------------------------
S2L ipmsi-65535-73730::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.3 Tunnel ID : 61442
P2MP ID : 65535 Lsp ID : 46592
S2L Name : ipmsi-65535-73730::p* To : 10.20.1.1
Out Interface : 1/1/1 Out Label : 262130
Num. of S2ls : 1
------------------------------------------------------------------------
S2L ipmsi-65535-73730::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.3 Tunnel ID : 61442
P2MP ID : 65535 Lsp ID : 46592
S2L Name : ipmsi-65535-73730::p* To : 10.20.1.4
Out Interface : 2/1/1 Out Label : 262109
Num. of S2ls : 1
------------------------------------------------------------------------
P2MP Cross-connect instances : 12

p2mp-lsp

Syntax 
p2mp-lsp [lsp-name] [detail]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] [mbb]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] s2l [s2l-name [to s2l-to-address]] [status {up | down}] [detail]
p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] s2l [s2l-name [to s2l-to-address]] mbb
Context 
show>router>mpls
Description 

This command displays MPLS P2MP LSP information.

Parameters 
lsp-name—
Specifies the name of the LSP used in the path.
p2mp-instance[p2mp-instance-name
Specifies the administrative name for the P2MP instance which must be unique within a virtual router instance.
mbb—
Specifies to display make-before-break (MBB) information.
s2l—
Specifies the source-to-leaf (S2L) name.
to s2l-to-address
Indicates the IP address of the destination address of the S2L sub-LSP.
status—
Displays the status of the p2mp LSP.
Values—
up — Displays the total time that this S2l has been operational. down — Displays the total time that this S2l has not been operational.
Output 

Sample Output
*A:Dut-C# show router mpls p2mp-lsp
- p2mp-lsp [<lsp-name>] [detail]
- p2mp-lsp [<lsp-name>] p2mp-instance [<p2mp-instance-name>] [mbb]
- p2mp-lsp [<lsp-name>] p2mp-instance [<p2mp-instance-name>] s2l [<s2l-name>
[to <s2l-to-address>]][status {up | down}] [detail]
- p2mp-lsp [<lsp-name>] p2mp-instance [<p2mp-instance-name>] s2l [<s2l-name>
[to <s2l-to-address>]] <mbb>
- p2mp-lsp using-template [lsp-template <template-name>] [detail]
<lsp-name> : [64 chars max] - accepts * as wildcard char
<p2mp-instance> : keyword
<p2mp-instance-name> : [max 32 chars]
<s2l> : keyword
<s2l-name> : [max 32 chars]
<up | down> : keywords
<detail> : keyword
<mbb> : keyword
<s2l-to-address> : [a.b.c.d]
<using-template> : keyword
<lsp-template> : [32 chars max]
*A:Dut-C# show router mpls p2mp-lsp
========================================================================
MPLS P2MP LSPs (Originating)
========================================================================
LSP Name Adm Opr
------------------------------------------------------------------------
ipmsi-1001-73728 Up Up
ipmsi-4000-73729 Up Up
ipmsi-65535-73730 Up Up
------------------------------------------------------------------------
LSPs : 3
========================================================================
*A:Dut-C# show router mpls p2mp-lsp detail
========================================================================
MPLS P2MP LSPs (Originating) (Detail)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name : ipmsi-1001-73728
LSP Type : P2mpAutoLsp LSP Tunnel ID : 61440
From : 10.20.1.3
Adm State : Up Oper State : Up
LSP Up Time : 6d 21:08:37 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 1
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : n/a
Adaptive : Enabled ClassType : 0
FastReroute : Enabled Oper FR : Enabled
FR Method : Facility FR Hop Limit : 16
FR Bandwidth: 0 Mbps FR Node Protect: Disabled
FR Object : Enabled
CSPF : Enabled ADSPEC : Disabled
Metric : Disabled Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Auto BW : Disabled
LdpOverRsvp : Disabled VprnAutoBind : Disabled
IGP Shortcut: Disabled BGP Shortcut : Disabled
BGPTransTun : Disabled
Oper Metric : Disabled
Prop Adm Grp: Disabled CSPFFirstLoose : Disabled
P2MPInstance: 1001 P2MP-Inst-type : Primary
S2L Cfg Cou*: 4 S2L Oper Count*: 4
S2l-Name : path_ipmsi To : 10.20.1.1
S2l-Name : path_ipmsi To : 10.20.1.2
S2l-Name : path_ipmsi To : 10.20.1.4
S2l-Name : path_ipmsi To : 10.20.1.5
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name : ipmsi-4000-73729
LSP Type : P2mpAutoLsp LSP Tunnel ID : 61441
From : 10.20.1.3
Adm State : Up Oper State : Up
LSP Up Time : 6d 21:08:38 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 1
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : n/a
Adaptive : Enabled ClassType : 0
FastReroute : Enabled Oper FR : Enabled
FR Method : Facility FR Hop Limit : 16
FR Bandwidth: 0 Mbps FR Node Protect: Disabled
FR Object : Enabled
CSPF : Enabled ADSPEC : Disabled
Metric : Disabled Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Auto BW : Disabled
LdpOverRsvp : Disabled VprnAutoBind : Disabled
IGP Shortcut: Disabled BGP Shortcut : Disabled
BGPTransTun : Disabled
Oper Metric : Disabled
Prop Adm Grp: Disabled CSPFFirstLoose : Disabled
P2MPInstance: 4000 P2MP-Inst-type : Primary
S2L Cfg Cou*: 2 S2L Oper Count*: 2
S2l-Name : path_ipmsi To : 10.20.1.1
S2l-Name : path_ipmsi To : 10.20.1.4
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name : ipmsi-65535-73730
LSP Type : P2mpAutoLsp LSP Tunnel ID : 61442
From : 10.20.1.3
Adm State : Up Oper State : Up
LSP Up Time : 6d 21:08:39 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 1
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : n/a
Adaptive : Enabled ClassType : 0
FastReroute : Enabled Oper FR : Enabled
FR Method : Facility FR Hop Limit : 16
FR Bandwidth: 0 Mbps FR Node Protect: Disabled
FR Object : Enabled
CSPF : Enabled ADSPEC : Disabled
Metric : Disabled Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Auto BW : Disabled
LdpOverRsvp : Disabled VprnAutoBind : Disabled
IGP Shortcut: Disabled BGP Shortcut : Disabled
BGPTransTun : Disabled
Oper Metric : Disabled
Prop Adm Grp: Disabled CSPFFirstLoose : Disabled
P2MPInstance: 65535 P2MP-Inst-type : Primary
S2L Cfg Cou*: 2 S2L Oper Count*: 2
S2l-Name : path_ipmsi To : 10.20.1.1
S2l-Name : path_ipmsi To : 10.20.1.4
========================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-C#
*A:sim1>config>router>mpls>lsp$ show router mpls p2mp-lsp p2mp-instance s2l detail
========================================================================
MPLS LSP S2L (Detail)
========================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
S - Strict L - Loose
s - Soft Preemption
========================================================================
------------------------------------------------------------------------
LSP 1 S2L 1
------------------------------------------------------------------------
LSP Name : 1 S2l LSP ID : 26624
P2MP ID : 0 S2l Grp Id : 0
Adm State : Up Oper State : Down
S2l State: : Inactive :
S2L Name : 1 To : 10.20.1.3
S2l Admin : Up S2l Oper : Down
OutInterface: n/a Out Label : n/a
S2L Up Time : 0d 00:00:00 S2L Dn Time : 0d 00:00:01
RetryAttempt: 0 NextRetryIn : 9 sec (Fast)
S2L Trans : 8 CSPF Queries: 4
Failure Code: noError Failure Node: n/a
ExplicitHops:
10.20.1.2(S)
Actual Hops :
No Hops Specified
ComputedHops:
No Hops Specified
LastResignal: n/a
========================================================================
show router mpls p2mp-lsp p2mp-instance s2l detail
========================================================================
------------------------------------------------------------------------
LSP 2 S2L 2
------------------------------------------------------------------------
LSP Name : 2 S2l LSP ID : 52230
P2MP ID : 0 S2l Grp Id : 2
Adm State : Up Oper State : Up
S2l State: : Active :
S2L Name : 2 To : 10.20.1.3
S2l Admin : Up S2l Oper : Up
OutInterface: 1/1/1 Out Label : 131071
S2L Up Time : 0d 00:04:43 S2L Dn Time : 0d 00:00:00
RetryAttempt: 0 NextRetryIn : 0 sec
S2L Trans : 5 CSPF Queries: 21
Failure Code: tunnelLocallyRepaired Failure Node: 10.20.1.2
ExplicitHops:
10.20.1.2(S)
Actual Hops :
10.10.1.1(10.20.1.1) Record Label : N/A
-> 10.10.1.2(10.20.1.2) @ # Record Label : 131071
-> 10.10.6.3(10.20.1.3) Record Label : 131068
ComputedHops:
10.10.1.1(S) -> 10.10.1.2(S) -> 10.10.5.3(S)
LastResignal: n/a
In Prog MBB :
MBB Type : GlobalRevert NextRetryIn : n/a
Timeout In : 23 sec
Started At : 06/29/2011 11:06:09 RetryAttempt: 7
FailureCode: noError Failure Node: n/a
========================================================================
*A:Dut-C>config>router>mpls>lsp$ /show router mpls lsp path detail
========================================================================
MPLS LSP Path (Detail)
========================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
s - Soft Preemption
S - Strict L - Loose
========================================================================
------------------------------------------------------------------------
LSP 1 Path 1
------------------------------------------------------------------------
LSP Name : 1 Path LSP ID : 56320
From : 10.20.1.3 To : 10.10.1.1
Adm State : Up Oper State : Up
Path Name : 1 Path Type : Primary
Path Admin : Up Path Oper : Up
OutInterface: 1/1/1 Out Label : 131071
Path Up Time: 0d 00:03:09 Path Dn Time: 0d 00:00:00
Retry Limit : 0 Retry Timer : 30 sec
RetryAttempt: 0 NextRetryIn : 0 sec
SetupPriori*: 7 Hold Priori*: 0
Preference : n/a
Bandwidth : No Reservation Oper Bw : 0 Mbps
Hop Limit : 255 Class Type : 0
Backup CT : None
MainCT Retry: n/a MainCT Retry: 0
Rem : Limit :
Oper CT : 0
Record Route: Record Record Label: Record
Oper MTU : 1496 Neg MTU : 1496
Adaptive : Enabled Oper Metric : 1000
Include Grps: Exclude Grps:
None None
Path Trans : 1 CSPF Queries: 3
Failure Code: badNode Failure Node: 10.20.1.3
Oper Values :
Setup Prior*: 7 Hold Priori*: 0
Record Route: Record Record Label: Record
Hop Limit : 255
Adspec : Disabled
CSPF : Enabled CSPFToFirst*: Disabled
Least Fill : Disabled FR Node Pro*: Disabled
Prop Adm Grp: Disabled
Include Grps: Exclude Grps:
None None
ExplicitHops:
No Hops Specified
Actual Hops :
10.10.2.3(10.20.1.3) @ # Record Label : N/A
-> 10.10.1.1(10.20.1.1) Record Label : 131071
ComputedHops:
10.10.2.3(S) -> 10.10.2.1(S)
ResigEligib*: False
LastResignal: n/a CSPF Metric : 1000
In Prog MBB :
MBB Type : GlobalRevert NextRetryIn : 0 sec
Timeout In : 22 sec
Started At : 08/26/2011 23:59:29 RetryAttempt: 2
FailureCode: noError Failure Node: n/a
Signaled BW: 0 Mbps
========================================================================
* indicates that the corresponding row element may have been truncated.
show router mpls p2mp-lsp p2mp-instance s2l detail
------------------------------------------------------------------------
LSP 2 S2L 2
------------------------------------------------------------------------
LSP Name : 2 S2l LSP ID : 52230
P2MP ID : 0 S2l Grp Id : 4
Adm State : Up Oper State : Down
S2l State: : Inactive :
S2L Name : 2 To : 10.20.1.3
S2l Admin : Up S2l Oper : In Progress
OutInterface: n/a Out Label : n/a
S2L Up Time : 0d 00:00:00 S2L Dn Time : 0d 00:00:20
RetryAttempt: 1 NextRetryIn : n/a
Timeout In : 21 sec
S2L Trans : 6 CSPF Queries: 27
Failure Code: noError Failure Node: n/a
ExplicitHops:
10.20.1.2(S)
Actual Hops :
No Hops Specified
LastResignal: n/a
*A:Dut-C# show router mpls p2mp-lsp
========================================================================
MPLS P2MP LSPs (Originating)
========================================================================
LSP Name Adm Opr
------------------------------------------------------------------------
ipmsi-1001-73728 Up Up
ipmsi-4000-73729 Up Up
ipmsi-65535-73730 Up Up
------------------------------------------------------------------------
LSPs : 3
========================================================================
*A:Dut-C# show router mpls p2mp-lsp detail
========================================================================
MPLS P2MP LSPs (Originating) (Detail)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name : ipmsi-1001-73728
LSP Type : P2mpAutoLsp LSP Tunnel ID : 61440
From : 10.20.1.3
Adm State : Up Oper State : Up
LSP Up Time : 6d 21:08:37 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 1
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : n/a
Adaptive : Enabled ClassType : 0
FastReroute : Enabled Oper FR : Enabled
FR Method : Facility FR Hop Limit : 16
FR Bandwidth: 0 Mbps FR Node Protect: Disabled
FR Object : Enabled
CSPF : Enabled ADSPEC : Disabled
Metric : Disabled Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Auto BW : Disabled
LdpOverRsvp : Disabled VprnAutoBind : Disabled
IGP Shortcut: Disabled BGP Shortcut : Disabled
BGPTransTun : Disabled
Oper Metric : Disabled
Prop Adm Grp: Disabled CSPFFirstLoose : Disabled
P2MPInstance: 1001 P2MP-Inst-type : Primary
S2L Cfg Cou*: 4 S2L Oper Count*: 4
S2l-Name : path_ipmsi To : 10.20.1.1
S2l-Name : path_ipmsi To : 10.20.1.2
S2l-Name : path_ipmsi To : 10.20.1.4
S2l-Name : path_ipmsi To : 10.20.1.5
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name : ipmsi-4000-73729
LSP Type : P2mpAutoLsp LSP Tunnel ID : 61441
From : 10.20.1.3
Adm State : Up Oper State : Up
LSP Up Time : 6d 21:08:38 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 1
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : n/a
Adaptive : Enabled ClassType : 0
FastReroute : Enabled Oper FR : Enabled
FR Method : Facility FR Hop Limit : 16
FR Bandwidth: 0 Mbps FR Node Protect: Disabled
FR Object : Enabled
CSPF : Enabled ADSPEC : Disabled
Metric : Disabled Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Auto BW : Disabled
LdpOverRsvp : Disabled VprnAutoBind : Disabled
IGP Shortcut: Disabled BGP Shortcut : Disabled
BGPTransTun : Disabled
Oper Metric : Disabled
Prop Adm Grp: Disabled CSPFFirstLoose : Disabled
P2MPInstance: 4000 P2MP-Inst-type : Primary
S2L Cfg Cou*: 2 S2L Oper Count*: 2
S2l-Name : path_ipmsi To : 10.20.1.1
S2l-Name : path_ipmsi To : 10.20.1.4
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name : ipmsi-65535-73730
LSP Type : P2mpAutoLsp LSP Tunnel ID : 61442
From : 10.20.1.3
Adm State : Up Oper State : Up
LSP Up Time : 6d 21:08:39 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 1
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : n/a
Adaptive : Enabled ClassType : 0
FastReroute : Enabled Oper FR : Enabled
FR Method : Facility FR Hop Limit : 16
FR Bandwidth: 0 Mbps FR Node Protect: Disabled
FR Object : Enabled
CSPF : Enabled ADSPEC : Disabled
Metric : Disabled Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Auto BW : Disabled
LdpOverRsvp : Disabled VprnAutoBind : Disabled
IGP Shortcut: Disabled BGP Shortcut : Disabled
BGPTransTun : Disabled
Oper Metric : Disabled
Prop Adm Grp: Disabled CSPFFirstLoose : Disabled
P2MPInstance: 65535 P2MP-Inst-type : Primary
S2L Cfg Cou*: 2 S2L Oper Count*: 2
S2l-Name : path_ipmsi To : 10.20.1.1
S2l-Name : path_ipmsi To : 10.20.1.4
========================================================================
* indicates that the corresponding row element may have been truncated.
*A:Dut-C#
*A:sim1>config>router>mpls>lsp$ show router mpls p2mp-lsp p2mp-instance s2l detail
========================================================================
MPLS LSP S2L (Detail)
========================================================================
Legend :
@ - Detour Available # - Detour In Use
b - Bandwidth Protected n - Node Protected
S - Strict L - Loose
s - Soft Preemption
========================================================================
------------------------------------------------------------------------
LSP 1 S2L 1
------------------------------------------------------------------------
LSP Name : 1 S2l LSP ID : 26624
P2MP ID : 0 S2l Grp Id : 0
Adm State : Up Oper State : Down
S2l State: : Inactive :
S2L Name : 1 To : 10.20.1.3
S2l Admin : Up S2l Oper : Down
OutInterface: n/a Out Label : n/a
S2L Up Time : 0d 00:00:00 S2L Dn Time : 0d 00:00:01
RetryAttempt: 0 NextRetryIn : 9 sec (Fast)
S2L Trans : 8 CSPF Queries: 4
Failure Code: noError Failure Node: n/a
ExplicitHops:
10.20.1.2(S)
Actual Hops :
No Hops Specified
ComputedHops:
No Hops Specified
LastResignal: n/a
========================================================================
A:ALU-25# show router mpls p2mp-lsp lsp_1
========================================================================
MPLS LSPs (Originating)
========================================================================
LSP Name To/P2MP ID Fastfail Adm Opr
Config
------------------------------------------------------------------------
lsp_1 18 Yes Up Up
------------------------------------------------------------------------
LSPs : 1
========================================================================
A:ALU-25#
A:ALU-25# show router mpls p2mp-lsp Test_p2mp detail
========================================================================
MPLS P2MP LSPs (Originating) (Detail)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name : lsp_1 LSP Tunnel ID : 1
From : 10.10.1.1 P2MP ID : 18
Adm State : Up Oper State : Down
LSP Up Time : 0d 00:00:00 LSP Down Time : 0d 20:39:48
Transitions : 0 Path Changes : 0
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : FF
Hop Limit : 255 Adaptive : Enabled
FastReroute : Disabled Oper FR : Disabled
FR Method : Facility FR Hop Limit : 45
FR Bandwidth: 0 Mbps FR Node Protect: Disabled
FR Object : Enabled
CSPF : Disabled ADSPEC : Disabled
Metric : 1 Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
P2MPinstance:Test_p2mp p2mp-inst-type : primary
S2L Name :Test-s2l1 To : 10.20.1.6
S2L Name :Test-s2l2 To : 10.20.1.5
S2L Name :Test-s2l3 To : 10.20.1.4
------------------------------------------------------------------------
A:ALU-25#
A:ALU-25# show router mpls p2mp-lsp Test_p2mp
========================================================================
MPLS P2MP Instance (Originating)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name : lsp_1 LSP Tunnel ID : 1
P2MP ID : 18 Path LSP ID : 18
Adm State : Up Oper State : Down
P2MPinstance:Test_p2mp p2mp-inst-type : primary
Inst Name : lsp_1 P2MP Inst ID : 1
Adm State : Up Oper State : Down
Inst Up Time: 0d 00:00:00 Inst Down Time : 0d 20:39:48
Hop Limit : 255 Adaptive : Enabled
Record Route: Record Record Label : Record
Include Grps: Exclude Grps :
None None
Bandwidth : 0 Mbps Oper Bw : 0 Mbps
S2L Name :Test-s2l1 To : 10.20.1.6
S2L Name :Test-s2l2 To : 10.20.1.5
S2L Name :Test-s2l3 To : 10.20.1.4
------------------------------------------------------------------------
A:ALU-25#

Note that the normal output is in detailed format only. There is no separate detail format.

A:ALU-52# show router mpls p2mp-lsp [p2mp-lsp-name] p2mp-instance [p2mp-inst-name]
========================================================================
MPLS P2MP Instance (Originating)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name : lsp_1 LSP Tunnel ID : 1
P2MP ID : 18 Path LSP ID : 18
Adm State : Up Oper State : Down
P2MPinstance:Test_p2mp p2mp-inst-type : primary
Inst Name : lsp_1 P2MP Inst ID : 1
Adm State : Up Oper State : Down
Inst Up Time: 0d 00:00:00 Inst Down Time : 0d 20:39:48
Hop Limit : 255 Adaptive : Enabled
Record Route: Record Record Label : Record
Include Grps: Exclude Grps :
None None
Bandwidth : 0 Mbps Oper Bw : 0 Mbps
S2L Name :Test-s2l1 To : 10.20.1.6
S2L Name :Test-s2l2 To : 10.20.1.5
S2L Name :Test-s2l3 To : 10.20.1.4
------------------------------------------------------------------------
A:ALU-52#
A:ALU-52# show router mpls p2mp-lsp [p2mp-lsp-name] p2mp-instance [p2mp-inst-name] mbb
========================================================================
MPLS P2MP Instance (Originating)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name : lsp_1 LSP Tunnel ID : 1
P2MP ID : 18 Path LSP ID : 18
Adm State : Up Oper State : Down
P2MPinstance:Test_p2mp p2mp-inst-type : primary
Inst Name : lsp_1 P2MP Inst ID : 1
Adm State : Up Oper State : Down
Inst Up Time: 0d 00:00:00 Inst Down Time : 0d 20:39:48
Hop Limit : 255 Adaptive : Enabled
Record Route: Record Record Label : Record
Include Grps: Exclude Grps :
None None
Bandwidth : 0 Mbps Oper Bw : 0 Mbps
Last MBB :
MBB type : Mbb State :
ended at : Old Metric :
In Prog MBB :
MBB type : Next Retry In :
Started at : Retry Attempt :
Failure code: Failure Node :
S2L Name :Test-s2l1 To : 10.20.1.6
S2l Admin : S2l Oper :
Failure code: Failure Node : 10.12.1.1
S2L Name :Test-s2l1 To : 10.20.1.6
S2l Admin : S2l Oper :
Failure code: Failure Node : 10.12.1.1
------------------------------------------------------------------------
A:ALU-52#
A:ALU-52# show router mpls p2mp-lsp [p2mp-lsp-name] p2mp-instance [p2mp-inst-name] s2l
[s2l-name]
========================================================================
MPLS S2Ls (Originating)
========================================================================
S2L Name To Next Hop Adm Opr
------------------------------------------------------------------------
Test-s2l1 10.20.1.6 10.10.1.2 Up Up
------------------------------------------------------------------------
LSPs : 1
========================================================================
A:ALU-52#
A:ALU-52# show router mpls p2mp-lsp [p2mp-lsp-name] p2mp-instance [p2mp-inst-name] s2l
[s2l-name] detail
========================================================================
MPLS S2Ls (Originating) (Detail)
========================================================================
------------------------------------------------------------------------
Type : Originating
------------------------------------------------------------------------
LSP Name : lsp_1 LSP Tunnel ID : 1
P2MP ID : 18 Path LSP ID : 18
Adm State : Up Oper State : Down
P2MP Primary Instance:
Inst Name : lsp_1 P2MP Inst ID : 1
Adm State : Up Oper State : Down
S2L Name : Test-s2l1 To : 10.20.1.6
Adm State : Up Oper State : Down
OutInterface: 1/1/1 Out Label : 131071
S2L Up Time : 0d 00:00:00 S2L Down Time : 0d 20:39:48
Transitions : 0 Path Changes : 0
Retry Limit : 0 Retry Timer : 30 sec
RetryAttempt: 0 NextRetryIn : 0 sec
Bandwidth : No Reservation Oper Bw : 0 Mbps
Hop Limit : 255 Adaptive : Enabled
Record Route: Record Record Label : Record
Oper MTU : 1496 Neg MTU : 1496
FastReroute : Disabled Oper FR : Disabled
FR Method : Facility FR Hop Limit : 45
FR Bandwidth: 0 Mbps FR Node Protect: Disabled
FR Object : Enabled
CSPF : Disabled ADSPEC : Disabled
Metric : 1 Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
CSPF Queries: 9
Failure Code: noError Failure Node : n/a
ExplicitHops:
No Hops Specified
Actual Hops :
10.10.1.1(10.20.1.1) @ Record Label : N/A
-> 10.10.1.2(10.20.1.2) Record Label : 131071
ComputedHops:
10.10.1.1 -> 10.10.1.2
LastResignal: n/a CSPF Metric : 1000
------------------------------------------------------------------------
A:ALU-52#
*A:Dut-C# show router mpls p2mp-lsp "ipmsi-1-73752" detail
=======================================================================
MPLS P2MP LSPs (Originating) (Detail)
=======================================================================
-------------------------------------------------------------------------------
Type : Originating
-----------------------------------------------------------------------
LSP Name : ipmsi-1-73752
LSP Type : P2mpAutoLsp LSP Tunnel ID : 61445
From : 10.20.1.3
Adm State : Up Oper State : Up
LSP Up Time : 0d 00:00:51 LSP Down Time : 0d 00:00:00
Transitions : 3 Path Changes : 3
Retry Limit : 0 Retry Timer : 30 sec
Signaling : RSVP Resv. Style : SE
Hop Limit : 255 Negotiated MTU : n/a
Adaptive : Enabled ClassType : 0
FastReroute : Enabled Oper FR : Enabled
FR Method : Facility FR Hop Limit : 16
FR Node Pro*: Disabled FR Prop Adm Grp: Disabled
FR Object : Enabled
Egress Stats: Enabled Egress Oper St*: Out-of-resource
CSPF : Enabled ADSPEC : Disabled
Metric : Disabled Use TE metric : Disabled
Include Grps: Exclude Grps :
None None
Least Fill : Disabled
Auto BW : Disabled
LdpOverRsvp : Enabled VprnAutoBind : Enabled
IGP Shortcut: Enabled BGP Shortcut : Enabled
IGP LFA : Disabled IGP Rel Metric : Disabled
BGPTransTun : Enabled
Oper Metric : Disabled
Prop Adm Grp: Disabled
P2MPInstance: 1 P2MP-Inst-type : Primary
S2L Cfg Cou*: 4 S2L Oper Count*: 4
S2l-Name : path_ipmsi To : 10.20.1.1
S2l-Name : path_ipmsi To : 10.20.1.2
S2l-Name : path_ipmsi To : 10.20.1.5
S2l-Name : path_ipmsi To : 10.20.1.6
=======================================================================

srlg-database

Syntax 
srlg-database [router-id ip-address] [interface ip-address]
Context 
show>router>mpls
Description 

This command displays MPLS SRLG database information.

Parameters 
router-id ip-address
Specifies a 32-bit integer uniquely identifying the router in the Autonomous System. By convention to ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses, represented as a 32-bit unsigned integer, if IPv4 is configured on the router. The router-id can be either the local one or some remote router.
interface ip-address
Specifies the IP address of the interface.

path

Syntax 
path [path-name] [lsp-binding]
Context 
show>router>mpls
Description 

This command displays MPLS paths.

Parameters 
path-name—
The unique name label for the LSP path.
lsp-binding—
Keyword to display binding information.
Output 

MPLS Path Output

Table 19 describes MPLS Path output fields.

Table 19:  MPLS Path Output Fields  

Label

Description  

Path Name

The unique name label for the LSP path.

Adm

Down — The path is administratively disabled.

Up — The path is administratively enabled.

Hop Index

The value used to order the hops in a path.

IP Address

The IP address of the hop that the LSP should traverse on the way to the egress router.

Strict/Loose

Strict — The LSP must take a direct path from the previous hop router to the next router.

Loose — The route taken by the LSP from the previous hop to the next hop can traverse through other routers.

LSP Name

The name of the LSP used in the path.

Binding

Primary — The preferred path for the LSP.

Secondary — The standby path for the LSP.

Paths

Total number of paths configured.

Sample Output
*A:SRU4>config>router>mpls# show router mpls path
===============================================================================
MPLS Path:
===============================================================================
Path Name Adm Hop Index IP Address Strict/Loose
-------------------------------------------------------------------------------
to_110_20_1_1 Up no hops n/a n/a
to_110_20_1_2 Up no hops n/a n/a
to_110_20_1_3 Up no hops n/a n/a
to_110_20_1_4 Up no hops n/a n/a
to_110_20_1_5 Up no hops n/a n/a
to_110_20_1_6 Up no hops n/a n/a
to_110_20_1_110 Up no hops n/a n/a
to_10_8_100_15 Up no hops n/a n/a
to_10_20_1_20 Up no hops n/a n/a
to_10_20_1_22 Up no hops n/a n/a
to_10_100_1_1 Up no hops n/a n/a
------------------------------------------------------------------------------
Paths : 11
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls path lsp-binding
===============================================================================
MPLS Path:
===============================================================================
Path Name Opr LSP Name Binding
-------------------------------------------------------------------------------
to_110_20_1_1 Up to_110_20_1_1_cspf Primary
Up to_110_20_1_1_cspf_2 Primary
Up to_110_20_1_1_cspf_3 Primary
Up to_110_20_1_1_cspf_16 Primary
Up to_110_20_1_1_cspf_17 Primary
Up to_110_20_1_1_cspf_18 Primary
Up to_110_20_1_1_cspf_19 Primary
Up to_110_20_1_1_cspf_20 Primary
to_110_20_1_2 Up to_110_20_1_2_cspf Primary
Up to_110_20_1_2_cspf_2 Primary
Up to_110_20_1_2_cspf_3 Primary
Up to_110_20_1_2_cspf_4 Primary
Up to_110_20_1_2_cspf_5 Primary
...
to_10_100_1_1 Down to_10_100_1_1_cspf Primary
Down to_10_100_1_1_cspf_2 Primary
Down to_10_100_1_1_cspf_3 Primary
Down to_10_100_1_1_cspf_4 Primary
Down to_10_100_1_1_cspf_5 Primary
Down to_10_100_1_1_cspf_6 Primary
Down to_10_100_1_1_cspf_13 Primary
Down to_10_100_1_1_cspf_14 Primary
Down to_10_100_1_1_cspf_15 Primary
Down to_10_100_1_1_cspf_16 Primary
Down to_10_100_1_1_cspf_17 Primary
Down to_10_100_1_1_cspf_18 Primary
Down to_10_100_1_1_cspf_19 Primary
Down to_10_100_1_1_cspf_20 Primary
-------------------------------------------------------------------------------
Paths : 11
===============================================================================
*A:SRU4>config>router>mpls#

srlg-group

Syntax 
srlg-group [group-name]
Context 
show>router>mpls
Description 

This command displays MPLS SRLG groups

Parameters 
group-name—
Specifies the name of the SRLG group within a virtual router instance.
Output 

MPLS SRLG Group Output

Table 20 describes MPLS SRLG group output fields

Table 20:  MPLS SRLG Group Output Fields  

Label

Description  

Group Name

Displays the name of the SRLG group within a virtual router instance.

Group Value

Displays the group value associated with this SRLG group.

Interface

Displays the interface where the SRLG groups is associated.

No. of Groups

Displays the total number of SRLG groups associated with the output.

Sample Output
*A:SRU4>config>router>mpls# show router mpls srlg-group
===============================================================================
MPLS Srlg Groups
===============================================================================
Group Name Group Value Interfaces
-------------------------------------------------------------------------------
1432 1432 srl-1
1433 1433 srl-3
1434 1434 aps-8
1435 1435 aps-9
2410 2410 srr-1
2411 2411 srr-2
2412 2412 srr-3
3410 3410 aps-1
3420 3420 aps-2
3430 3430 aps-3
3440 3440 sr4-1
41.80 4180 g7600
41104 41104 germ-1
415.70 41570 gsr1
420.40 42040 m160
422.60 42260 gsr2
44.200 44200 hubA
45100 45100 ess-7-1
45110 45110 ess-7-2
45120 45120 ess-7-3
4651 4651 src-1.1
4652 4652 src-1.2
4653 4653 src-1.3
4654 4654 src-1.4
4655 4655 src-1.5
4656 4656 src-1.6
4657 4657 src-1.7
4658 4658 src-1.8
4659 4659 src-1.9
4660 4660 src-1.10
-------------------------------------------------------------------------------
No. of Groups: 30
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls srlg-group "1432"
===============================================================================
MPLS Srlg Groups
===============================================================================
Group Name Group Value Interfaces
-------------------------------------------------------------------------------
1432 1432 srl-1
-------------------------------------------------------------------------------
No. of Groups: 1
===============================================================================
*A:SRU4>config>router>mpls#

static-lsp

Syntax 
static-lsp [lsp-name]
static-lsp {transit | terminate}
static-lsp count
Context 
show>router>mpls
Description 

This command displays MPLS static LSP information.

Output 

MPLS Static LSP Output

Table 21 describes the MPLS static LSP output fields.

Table 21:  MPLS Static LSP Output Fields  

Label

Description  

Lsp Name

The name of the LSP used in the path.

To

The system IP address of the egress router for the LSP.

Next Hop

The system IP address of the next hop in the LSP path.

In I/F

The ingress interface.

Out Label

The egress interface.

Out I/F

The egress interface.

Adm

Down — The path is administratively disabled.

Up — The path is administratively enabled.

Opr

Down — The path is operationally down.

Up — The path is operationally up.

LSPs

The total number of static LSPs.

Sample Output
A:ALA-12# show router mpls static-lsp
===============================================================================
MPLS Static LSPs (Originating)
===============================================================================
Lsp Name To Next Hop Out Label Out I/F Adm Opr
-------------------------------------------------------------------------------
NYC_SJC_customer2 100.20.1.10 10.10.1.4 1020 1/1/1 Up Up
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
A:ALA-12#
*A:SRU4>config>router>mpls# show router mpls static-lsp transit
===============================================================================
MPLS Static LSPs (Transit)
===============================================================================
In Label In Port Out Label Out Port Next Hop Adm Opr
-------------------------------------------------------------------------------
240 aps-1 440 1/1/10 11.22.11.3 Up Up
241 aps-1 441 1/1/10 11.22.11.3 Up Up
242 aps-1 442 1/1/10 11.22.11.3 Up Up
243 aps-1 443 1/1/10 11.22.11.3 Up Up
244 aps-1 444 1/1/10 11.22.11.3 Up Up
245 aps-1 445 1/1/10 11.22.11.3 Up Up
246 aps-1 446 1/1/10 11.22.11.3 Up Up
247 aps-1 447 1/1/10 11.22.11.3 Up Up
248 aps-1 448 1/1/10 11.22.11.3 Up Up
249 aps-1 449 1/1/10 11.22.11.3 Up Up
250 aps-1 450 1/1/10 11.22.11.3 Up Up
251 aps-1 451 1/1/10 11.22.11.3 Up Up
252 aps-1 452 1/1/10 11.22.11.3 Up Up
253 aps-1 453 1/1/10 11.22.11.3 Up Up
...
207 3/2/8 407 1/1/9 11.22.10.3 Up Up
208 3/2/8 408 1/1/9 11.22.10.3 Up Up
209 3/2/8 409 1/1/9 11.22.10.3 Up Up
-------------------------------------------------------------------------------
LSPs : 256
===============================================================================
*A:SRU4>config>router>mpls#
A:ALA-12# show router mpls static-lsp terminate
===============================================================================
MPLS Static LSPs (Terminate)
===============================================================================
In Label In I/F Out Label Out I/F Next Hop Adm Opr
-------------------------------------------------------------------------------
1021 1/1/1 n/a n/a n/a Up Up
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
A:ALA-12#

statistics-summary

Syntax 
statistics-summary
Context 
show>router>mpls>statistics-summary
Description 

This command displays the number of LSP statistics configured.

Output 

Sample Output
*A:SRU4>config>router>mpls# show router mpls statistics-summary
===============================================================================
Statistics Summary
===============================================================================
LSP egress statistics : 0
LSP ingress statistics : 0
===============================================================================
*A:SRU4>config>router>mpls#

status

Syntax 
status
Context 
show>router>mpls
Description 

This command displays MPLS operation information.

Output 

MPLS Status Output

Table 22 describes MPLS status output fields.

Table 22:  MPLS Status Output Fields  

Label

Description

Admin Status

Down — MPLS is administratively disabled.

Up — MPLS is administratively enabled.

Oper Status

Down — MPLS is operationally down.

Up — MPLS is operationally up.

LSP Counts

Static LSPs — Displays the count of static LSPs that originate, transit, and terminate on or through the router.

Dynamic LSPs — Displays the count of dynamic LSPs that originate, transit, and terminate on or through the router.

Detour LSPs — Displays the count of detour LSPs that originate, transit, and terminate on or through the router.

FR Object

Enabled — Specifies that Fast reroute object is signaled for the LSP.

Disabled — Specifies that Fast reroute object is not signaled for the LSP.

Resignal Timer

Enabled — Specifies that the resignal timer is enabled for the LSP.

Disabled — Specifies that the resignal timer is disabled for the LSP.

Hold Timer

Displays the amount of time that the ingress node holds before programming its data plane and declaring the LSP up to the service module.

Sample Output
*A:DutC>show router mpls status
=======================================================================
MPLS Status
=======================================================================
Admin Status : Down Oper Status : Down
Oper Down Reason : adminDown
FR Object : Enabled Resignal Timer : Disabled
Hold Timer : 1 seconds Next Resignal : N/A
Srlg Frr : Disabled Srlg Frr Strict : Disabled
Admin Group Frr : Disabled
Dynamic Bypass : Enabled User Srlg Database : Disabled
Least Fill Min Thd.: 5 percent LeastFill ReoptiThd: 10 percent
Short. TTL Prop Lo*: Enabled Short. TTL Prop Tr*: Enabled
AB Sample Multipli*: 1 AB Adjust Multipli*: 288
Exp Backoff Retry : Disabled CSPF On Loose Hop : Disabled
Lsp Init RetryTime*: 30 seconds
Logger Event Bundl*: Disabled
P2mp Resignal Timer: Disabled P2mp Next Resignal : N/A
Sec FastRetryTimer : Disabled Static LSP FR Timer: 30 seconds
P2P Max Bypass Ass*: 1000
P2PActPathFastRetry: Disabled P2MP S2L Fast Retry: Disabled
In Maintenance Mode: No
MplsTp : Disabled
Next Available Lsp Index : 1
EntropyLbl Rsvp-TE : Enabled
LSP Counts Originate Transit Terminate
-----------------------------------------------------------------------
Static LSPs 0 0 0
Dynamic LSPs 0 0 0
Detour LSPs 0 0 0
P2MP S2Ls 0 0 0
MPLS-TP LSPs 0 0 0
=======================================================================

tp-lsp

Syntax 
tp-lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail]
tp-lsp [lsp-name] path [protecting | working] [detail]
tp-lsp [lsp-name] protection
Context 
show>router>mpls
Description 

This command displays TP LSP information.

Parameters 
lsp-name—
Specifies the LSP name up to 32 characters; accepts * as a wild card character
path—
Displays LSP path information.
protection—
Displays LSP protection information.
up | down—
Specifies the state of the LSP.
Output 

Sample Output
*A:mlstp-dutA# show router mpls tp-lsp
path
protection
to <a.b.c.d>
<lsp-name>
"lsp-32" "lsp-33" "lsp-34" "lsp-35" "lsp-36" "lsp-37" "lsp-38" "lsp-39"
"lsp-40" "lsp-41"
status {up | down}
from <ip-address>
detail
*A:mlstp-dutA# show router mpls tp-lsp "lsp-
"lsp-32" "lsp-33" "lsp-34" "lsp-35" "lsp-36" "lsp-37" "lsp-38" "lsp-39"
"lsp-40" "lsp-41"
*A:mlstp-dutA# show router mpls tp-lsp "lsp-32"
===============================================================================
MPLS MPLS-TP LSPs (Originating)
===============================================================================
LSP Name To Tun Protect Adm Opr
Id Path
-------------------------------------------------------------------------------
lsp-32 0.0.3.234 32 No Up Up
-------------------------------------------------------------------------------
LSPs : 1
===============================================================================
*A:mlstp-dutA# show router mpls tp-lsp "lsp-32" detail
===============================================================================
MPLS MPLS-TP LSPs (Originating) (Detail)
===============================================================================
-------------------------------------------------------------------------------
Type : Originating
-------------------------------------------------------------------------------
LSP Name : lsp-32
LSP Type : MplsTp LSP Tunnel ID : 32
From Node Id: 0.0.3.233+ To Node Id : 0.0.3.234
Adm State : Up Oper State : Up
LSP Up Time : 0d 04:50:47 LSP Down Time : 0d 00:00:00
Transitions : 1 Path Changes : 2
DestGlobalId: 42 DestTunnelNum : 32
===============================================================================
*A:mlstp-dutA# show router mpls tp-lsp path
===============================================================================
MPLS-TP LSP Path Information
===============================================================================
LSP Name : lsp-32 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Working 32 32 AtoB_1 Up Down
Protect 2080 2080 AtoC_1 Up Up
===============================================================================
LSP Name : lsp-33 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Working 33 33 AtoB_1 Up Down
Protect 2082 2082 AtoC_1 Up Up
===============================================================================
LSP Name : lsp-34 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Working 34 34 AtoB_1 Up Down
Protect 2084 2084 AtoC_1 Up Up
===============================================================================
LSP Name : lsp-35 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Working 35 35 AtoB_1 Up Down
Protect 2086 2086 AtoC_1 Up Up
===============================================================================
LSP Name : lsp-36 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Working 36 36 AtoB_1 Up Down
Protect 2088 2088 AtoC_1 Up Up
===============================================================================
LSP Name : lsp-37 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Working 37 37 AtoB_1 Up Down
Protect 2090 2090 AtoC_1 Up Up
===============================================================================
LSP Name : lsp-38 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Working 38 38 AtoB_1 Up Down
Protect 2092 2092 AtoC_1 Up Up
===============================================================================
LSP Name : lsp-39 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Working 39 39 AtoB_1 Up Down
Protect 2094 2094 AtoC_1 Up Up
===============================================================================
LSP Name : lsp-40 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Working 40 40 AtoB_1 Up Down
Protect 2096 2096 AtoC_1 Up Up
===============================================================================
LSP Name : lsp-41 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Working 41 41 AtoB_1 Up Down
Protect 2098 2098 AtoC_1 Up Up
*A:mlstp-dutA# show router mpls tp-lsp "lsp-32" path working
===============================================================================
MPLS-TP LSP Working Path Information
LSP: "lsp-32"
===============================================================================
LSP Name : lsp-32 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Working 32 32 AtoB_1 Up Down
===============================================================================
*A:mlstp-dutA# show router mpls tp-lsp "lsp-32" path protect
===============================================================================
MPLS-TP LSP Protect Path Information
LSP: "lsp-32"
===============================================================================
LSP Name : lsp-32 To : 0.0.3.234
Admin State : Up Oper State : Up
-------------------------------------------------------------------------------
Path NextHop InLabel OutLabel Out I/F Admin Oper
-------------------------------------------------------------------------------
Protect 2080 2080 AtoC_1 Up Up
===============================================================================
*A:mlstp-dutA# show router mpls tp-lsp "lsp-32" path protect detail
===============================================================================
MPLS-TP LSP Protect Path Information
LSP: "lsp-32" (Detail)
===============================================================================
LSP Name : lsp-32 To : 0.0.3.234
Admin State : Up Oper State : Up
Protect path information
-------------------------------------------------------------------------------
Path Type : Protect LSP Num : 2
Path Admin : Up Path Oper : Up
Out Interface : AtoC_1 Next Hop Addr : n/a
In Label : 2080 Out Label : 2080
Path Up Time : 0d 04:52:17 Path Dn Time : 0d 00:00:00
Active Path : Yes Active Time : 0d 00:52:56
MEP information
MEP State : Up BFD : cc
OAM Templ : privatebed-oam-template CC Status : inService
CV Status : unknown
Protect Templ : privatebed-protection-template WTR Count Down: 0 seconds
RX PDU : SF (1,1) TX PDU : SF (1,1)
Defects :
===============================================================================
*A:mlstp-dutA# show router mpls tp-lsp "lsp-32" path working detail
===============================================================================
MPLS-TP LSP Working Path Information
LSP: "lsp-32" (Detail)
===============================================================================
LSP Name : lsp-32 To : 0.0.3.234
Admin State : Up Oper State : Up
Working path information
-------------------------------------------------------------------------------
Path Type : Working LSP Num : 1
Path Admin : Up Path Oper : Up
Out Interface : AtoB_1 Next Hop Addr : n/a
In Label : 32 Out Label : 32
Path Up Time : 18d 22:39:53                     Path Dn Time : 0d 00:00:00
Active Path : Yes                              Active Time : 18d 22:34:52
MEP information
MEP State : Up BFD : cc
OAM Templ : privatebed-oam-template BFD Status    : inService
Ingress I/F N*: 0                                Egress I/F Num: 0
AIS State     : AIS
===============================================================================
*A:mlstp-dutA#
*A:mlstp-dutA# show router mpls tp-lsp protection
===============================================================================
MPLS-TP LSP Protection Information
Legend: W-Working, P-Protect,
===============================================================================
LSP Name Admin Oper Path Ingr/Egr Act. Rx PDU
State State State Label Path Tx PDU
-------------------------------------------------------------------------------
lsp-32 Up Up W Down 32/32 No SF (1,1)
P Up 2080/2080 Yes SF (1,1)
lsp-33 Up Up W Down 33/33 No SF (1,1)
P Up 2082/2082 Yes SF (1,1)
lsp-34 Up Up W Down 34/34 No SF (1,1)
P Up 2084/2084 Yes SF (1,1)
lsp-35 Up Up W Down 35/35 No SF (1,1)
P Up 2086/2086 Yes SF (1,1)
lsp-36 Up Up W Down 36/36 No SF (1,1)
P Up 2088/2088 Yes SF (1,1)
lsp-37 Up Up W Down 37/37 No SF (1,1)
P Up 2090/2090 Yes SF (1,1)
lsp-38 Up Up W Down 38/38 No SF (1,1)
P Up 2092/2092 Yes SF (1,1)
lsp-39 Up Up W Down 39/39 No SF (1,1)
P Up 2094/2094 Yes SF (1,1)
lsp-40 Up Up W Down 40/40 No SF (1,1)
P Up 2096/2096 Yes SF (1,1)
lsp-41 Up Up W Down 41/41 No SF (1,1)
P Up 2098/2098 Yes SF (1,1)
-------------------------------------------------------------------------------
No. of MPLS-TP LSPs: 10
===============================================================================

Show Router BFD session Commands

session

Syntax 
session {ipv4 | ipv6} detail [lag lag-id] lag-port port-id
session lsp-name Lsp Name
session lsp-rsvp {head | tail}
session src ip-address/link-local address dest ip-address | link-local address detail lsp-rsvp {head | tail} tunnel-id tunnel-id lsp-id lsp-id
session mpls-tp
session lsp-name Lsp Name [link-type {cc-only | cc-cv}] detail
session p2mp-interface interface-name detail
session src ip-address/link-local address detail lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
session [src ip-address/link-local address] [ipv4 | ipv6]
session src ip-address/link-local address dest ip-address | link-local address
session src ip-address/link-local address detail
session summary
session type type [ipv4 | ipv6]
Context 
show>router>bfd
Description 

This command display BFD session information.

Parameters 
ipv4 | ipv6—
Displays session information for IPv4 or IPv6.
detail—
Displays detailed information.
lag lag-id
Displays information about the specified LAG ID.
lag-port port-id
Displays information about the specified LAG port ID.
lsp-name Lsp Name—
Displays information about the specified LSP name.
lsp-rsvp {head | tail}
Displays a summary of all head or tail RSVP LSP BFD sessions. The information in this show command should be the same as the show>router>bfd>session commands, but filtered for sessions associated with RSVP LSPs. The protocol field of the output should indicate lsp-rsvp.
src ip-address/link-local address
Displays information about the specified source IPaddress or link local address.
dest ip-address | link-local address
Displays information about the specified destination IPaddress or link local address.
tunnel-id tunnel-id
Displays information about the specified tunnel.
lsp-id lsp-id
Displays information about the specified LSP.
p2mp-interface interface-name
Displays information about the specified P2MP interface
rsvp-session-name [256 chars max]
Displays a summary of all head or tail RSVP LSP BFD sessions. The information in this show command should be the same as the show>router>bfd>session commands, but filtered for sessions associated with RSVP LSPs. The protocol field of the output should indicate lsp-rsvp.
type type
Specifies the type.
Values—
iom, central, cpm-np
summary—
Displays summarized information.

Show RSVP Commands

interface

Syntax 
interface [ip-int-name | ip-address] statistics [detail]
Context 
show>router>rsvp
Description 

This command shows RSVP interfaces.

Parameters 
ip-int-name—
The name of the network IP interface. An interface name cannot be in the form of an IP address. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
ip-address—
The system or network interface IP address.
statistics—
Displays the RSVP interface name and counts of various RSVP packets sent and received on the interface.
detail
Displays detailed information.
Output 

RSVP Interface Output

Table 23 describes RSVP interface output fields.

Table 23:  RSVP Interface Output Fields  

Label

Description  

Interface

The name of the IP interface.

Total Sessions

The total number of RSVP sessions on this interface. This count includes sessions that are active as well as sessions that have been signaled but a response has not yet been received.

Active Sessions

The total number of active RSVP sessions on this interface.

Total BW (Mbps)

The amount of bandwidth in Mb/s available to be reserved for the RSVP protocol on the interface.

Resv BW (Mbps)

The amount of bandwidth in Mb/s reserved on this interface. A value of zero (0) indicates that no bandwidth is reserved.

Adm

Down — The RSVP interface is administratively disabled.

Up — The RSVP interface is administratively enabled.

Bfd

Yes — BFD is enabled on the RSVP interface.

No — BFD is disabled on the RSVP interface.

Opr

Down — The RSVP interface is operationally down.

Up — The RSVP interface is operationally up.

Port ID

Specifies the physical port bound to the interface.

Active Resvs

The total number of active RSVP sessions that have reserved bandwidth.

Subscription

Specifies the percentage of the link bandwidth that RSVP can use for reservation. When the value is zero (0), no new sessions are permitted on this interface.

Port Speed

Specifies the speed for the interface.

Unreserved BW

Specifies the amount of unreserved bandwidth.

Reserved BW

Specifies the amount of bandwidth in Mb/s reserved by the RSVP session on this interface. A value of zero (0) indicates that no bandwidth is reserved.

Total BW

Specifies the amount of bandwidth in Mb/s available to be reserved for the RSVP protocol on this interface.

Aggregate

Aggregate messages are used to pack multiple RSVP messages into a single packet to reduce the network overhead. When the value is true, RSVP negotiates with each neighbor and gets consensus before sending aggregate messages.

Hello Interval

Specifies the length of time (in s) between the hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network. When the value is zero (0), the sending of hello messages is disabled.

Refresh Time

Specifies the interval between the successive Path and Resv refresh messages. RSVP declares the session down after it misses ((keep-multiplier + 0.5) * 1.5 * refresh-time)) consecutive refresh messages.

Hello Timeouts

The total number of hello messages that timed out on this RSVP interface.

Neighbors

The IP address of the RSVP neighbor.

Sent

The total number of error free RSVP packets that have been transmitted on the RSVP interface.

Recd

The total number of error free RSVP packets received on the RSVP interface.

Total Packets

The total number of RSVP packets, including errors, received on the RSVP interface.

Bad Packets

The total number of RSVP packets with errors transmitted on the RSVP interface.

Paths

The total number of RSVP PATH messages received on the RSVP interface.

Path Errors

The total number of RSVP PATH ERROR messages transmitted on the RSVP interface.

Path Tears

The total number of RSVP PATH TEAR messages received on the RSVP interface.

Resvs

The total number of RSVP RESV messages received on the RSVP interface.

Resv Confirms

The total number of RSVP RESV CONFIRM messages received on the RSVP interface.

Resv Errors

Total RSVP RESV ERROR messages received on RSVP interface.

Resv Tears

Total RSVP RESV TEAR messages received on RSVP interface.

Refresh Summaries

Total RSVP RESV summary refresh messages received on interface.

Refresh Acks

Total RSVP RESV acknowledgement messages received when refresh reduction is enabled on the RSVP interface.

Bundle Packets

Total RSVP RESV bundled packets received on the RSVP interface.

Hellos

Total RSVP RESV HELLO REQ messages received on the interface.

Sample Output
*A:Dut-A>config>router>mpls>lsp$ /show router rsvp interface "ip-10.10.1.1" detail
=======================================================================
RSVP Interface (Detailed) : ip-10.10.1.1
=======================================================================
-----------------------------------------------------------------------
Interface : ip-10.10.1.1
-----------------------------------------------------------------------
Interface : ip-10.10.1.1
Port ID : 1/1/1
Admin State : Up Oper State : Up
Active Sessions : 1 Active Resvs : 0
Total Sessions : 1
Subscription : 100 % Port Speed : 100 Mbps
Total BW : 100 Mbps Aggregate : Dsabl
Hello Interval : n/a Hello Timeouts : n/a
Authentication : Disabled
Auth Rx Seq Num : n/a Auth Key Id : n/a
Auth Tx Seq Num : n/a Auth Win Size : n/a
Refresh Reduc. : Disabled Reliable Deli. : Disabled
Bfd Enabled : n/a Graceful Shut. : Disabled
ImplicitNullLabel : Disabled* GR helper : n/a
Percent Link Bandwidth for Class Types*
Link Bw CT0 : 100 Link Bw CT4 : 0
Link Bw CT1 : 0 Link Bw CT5 : 0
Link Bw CT2 : 0 Link Bw CT6 : 0
Link Bw CT3 : 0 Link Bw CT7 : 0
Bandwidth Constraints for Class Types (Kbps)
BC0 : 100000 BC4 : 0
BC1 : 0 BC5 : 0
BC2 : 0 BC6 : 0
BC3 : 0 BC7 : 0
Bandwidth for TE Class Types (Kbps)
TE0-> Resv. Bw : 0 Unresv. Bw : 100000
TE1-> Resv. Bw : 0 Unresv. Bw : 100000
TE2-> Resv. Bw : 0 Unresv. Bw : 100000
TE3-> Resv. Bw : 0 Unresv. Bw : 100000
TE4-> Resv. Bw : 0 Unresv. Bw : 100000
TE5-> Resv. Bw : 0 Unresv. Bw : 100000
TE6-> Resv. Bw : 0 Unresv. Bw : 100000
TE7-> Resv. Bw : 0 Unresv. Bw : 100000
IGP Update
Up Thresholds(%) : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100 *
Down Thresholds(%) : 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0 *
IGP Update Pending : No
Next Update : N/A
Neighbors : 10.20.1.2
* indicates inherited values
=======================================================================
*A:Dut-A>config>router>mpls>lsp$
*A:SRU4>show>router>rsvp# interface
===============================================================================
RSVP Interfaces
===============================================================================
Interface Total Active Total BW Resv BW Adm Opr
Sessions Sessions (Mbps) (Mbps)
-------------------------------------------------------------------------------
system - - - - Up Up
aps-1 0 0 6012 0 Up Up
aps-2 0 0 6010 0 Up Up
aps-3 0 0 6010 0 Up Up
sr4-1 0 0 6010 0 Up Up
ess-7-1 9 9 100 0 Up Up
ess-7-2 7 7 100 0 Up Up
ess-7-3 4 4 100 0 Up Up
ess-7-4 0 0 800 0 Up Up
ess-7-5 0 0 800 0 Up Up
ess-7-6 0 0 800 0 Up Up
hubA 0 0 100 0 Up Up
germ-1 0 0 1000 0 Up Up
src-1.1 3 3 100 0 Up Up
src-1.2 2 2 100 0 Up Up
src-1.3 3 3 100 0 Up Up
src-1.4 5 5 100 0 Up Up
...
g7600 0 0 1000 0 Up Up
m160 481 481 1000 82 Up Up
-------------------------------------------------------------------------------
Interfaces : 35
===============================================================================
*A:SRU4>show>router>rsvp#
*A:SRU4>show>router>rsvp# interface statistics
===============================================================================
RSVP Interface (statistics)
===============================================================================
-------------------------------------------------------------------------------
Interface system
-------------------------------------------------------------------------------
Interface : Up
Total Packets (Sent) : 0 (Recd.): 0
Bad Packets (Sent) : 0 (Recd.): 0
Paths (Sent) : 0 (Recd.): 0
Path Errors (Sent) : 0 (Recd.): 0
Path Tears (Sent) : 0 (Recd.): 0
Resvs (Sent) : 0 (Recd.): 0
Resv Confirms (Sent) : 0 (Recd.): 0
Resv Errors (Sent) : 0 (Recd.): 0
Resv Tears (Sent) : 0 (Recd.): 0
Refresh Summaries (Sent) : 0 (Recd.): 0
Refresh Acks (Sent) : 0 (Recd.): 0
Bundle Packets (Sent) : 0 (Recd.): 0
Hellos (Sent) : 0 (Recd.): 0
Auth Errors (Sent) : 0 (Recd.): 0
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
Interface m160
-------------------------------------------------------------------------------
Interface : Up
Total Packets (Sent) : 883643 (Recd.): 3052503
Bad Packets (Sent) : 0 (Recd.): 0
Paths (Sent) : 592153 (Recd.): 373610
Path Errors (Sent) : 464 (Recd.): 30716
Path Tears (Sent) : 29563 (Recd.): 3480
Resvs (Sent) : 93970 (Recd.): 2518660
Resv Confirms (Sent) : 0 (Recd.): 0
Resv Errors (Sent) : 136815 (Recd.): 54115
Resv Tears (Sent) : 13338 (Recd.): 71922
Refresh Summaries (Sent) : 0 (Recd.): 0
Refresh Acks (Sent) : 0 (Recd.): 0
Bundle Packets (Sent) : 0 (Recd.): 0
Hellos (Sent) : 17340 (Recd.): 0
Auth Errors (Sent) : 0 (Recd.): 0
===============================================================================
*A:SRU4>show>router>rsvp#
*A:SRU4>show>router>rsvp# interface "sr4-1" statistics
===============================================================================
RSVP Interface : sr4-1 (statistics)
===============================================================================
-------------------------------------------------------------------------------
Interface sr4-1
-------------------------------------------------------------------------------
Interface : Up
Total Packets (Sent) : 33100 (Recd.): 20405
Bad Packets (Sent) : 0 (Recd.): 0
Paths (Sent) : 0 (Recd.): 1833
Path Errors (Sent) : 1783 (Recd.): 9
Path Tears (Sent) : 0 (Recd.): 1157
Resvs (Sent) : 76 (Recd.): 0
Resv Confirms (Sent) : 0 (Recd.): 0
Resv Errors (Sent) : 0 (Recd.): 0
Resv Tears (Sent) : 1 (Recd.): 0
Refresh Summaries (Sent) : 4 (Recd.): 33
Refresh Acks (Sent) : 1520 (Recd.): 4
Bundle Packets (Sent) : 0 (Recd.): 0
Hellos (Sent) : 29716 (Recd.): 17369
Auth Errors (Sent) : 0 (Recd.): 0
===============================================================================
*A:SRU4>show>router>rsvp#
*A:SRU4>show>router>rsvp# interface detail
===============================================================================
RSVP Interfaces (Detailed)
===============================================================================
-------------------------------------------------------------------------------
Interface : system
-------------------------------------------------------------------------------
Interface : system
Port ID : system
Admin State : Up Oper State : Up
Active Sessions : 0 Active Resvs : 0
Total Sessions : 0
Subscription : 100 % Port Speed : 0 Mbps
Total BW : 0 Mbps Aggregate : Dsabl
Hello Interval : 3000 ms Hello Timeouts : 0
Authentication : Disabled
Auth Rx Seq Num : n/a Auth Key Id : n/a
Auth Tx Seq Num : n/a Auth Win Size : n/a
Refresh Reduc. : Enabled Reliable Deli. : Disabled
Bfd Enabled : No Graceful Shut. : Disabled
ImplicitNullLabel : Disabled*
Percent Link Bandwidth for Class Types*
Link Bw CT0 : 100 Link Bw CT4 : 0
Link Bw CT1 : 0 Link Bw CT5 : 0
Link Bw CT2 : 0 Link Bw CT6 : 0
Link Bw CT3 : 0 Link Bw CT7 : 0
Bandwidth Constraints for Class Types (Kbps)
BC0 : 0 BC4 : 0
BC1 : 0 BC5 : 0
BC2 : 0 BC6 : 0
BC3 : 0 BC7 : 0
Bandwidth for TE Class Types (Kbps)
TE0-> Resv. Bw : 0 Unresv. Bw : 0
TE1-> Resv. Bw : 0 Unresv. Bw : 0
TE2-> Resv. Bw : 0 Unresv. Bw : 0
TE3-> Resv. Bw : 0 Unresv. Bw : 0
TE4-> Resv. Bw : 0 Unresv. Bw : 0
TE5-> Resv. Bw : 0 Unresv. Bw : 0
TE6-> Resv. Bw : 0 Unresv. Bw : 0
TE7-> Resv. Bw : 0 Unresv. Bw : 0
IGP Update
Up Thresholds(%) : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100 *
Down Thresholds(%) : 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0 *
IGP Update Pending : No
Next Update : N/A
No Neighbors.
-------------------------------------------------------------------------------
Interface : m160
-------------------------------------------------------------------------------
Interface : m160
Port ID : 3/2/1
Admin State : Up Oper State : Up
Active Sessions : 218 Active Resvs : 0
Total Sessions : 517
Subscription : 1000 % Port Speed : 100 Mbps
Total BW : 1000 Mbps Aggregate : Dsabl
Hello Interval : 3000 ms Hello Timeouts : 0
Authentication : Disabled
Auth Rx Seq Num : n/a Auth Key Id : n/a
Auth Tx Seq Num : n/a Auth Win Size : n/a
Refresh Reduc. : Enabled Reliable Deli. : Disabled
Bfd Enabled : No Graceful Shut. : Disabled
ImplicitNullLabel : Disabled*
Percent Link Bandwidth for Class Types*
Link Bw CT0 : 100 Link Bw CT4 : 0
Link Bw CT1 : 0 Link Bw CT5 : 0
Link Bw CT2 : 0 Link Bw CT6 : 0
Link Bw CT3 : 0 Link Bw CT7 : 0
Bandwidth Constraints for Class Types (Kbps)
BC0 : 1000000 BC4 : 0
BC1 : 0 BC5 : 0
BC2 : 0 BC6 : 0
BC3 : 0 BC7 : 0
Bandwidth for TE Class Types (Kbps)
TE0-> Resv. Bw : 0 Unresv. Bw : 1000000
TE1-> Resv. Bw : 0 Unresv. Bw : 1000000
TE2-> Resv. Bw : 0 Unresv. Bw : 1000000
TE3-> Resv. Bw : 0 Unresv. Bw : 1000000
TE4-> Resv. Bw : 0 Unresv. Bw : 1000000
TE5-> Resv. Bw : 0 Unresv. Bw : 1000000
TE6-> Resv. Bw : 0 Unresv. Bw : 1000000
TE7-> Resv. Bw : 0 Unresv. Bw : 1000000
IGP Update
Up Thresholds(%) : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100 *
Down Thresholds(%) : 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0 *
IGP Update Pending : No
Next Update : N/A
Neighbors : 10.100.30.20
* indicates inherited values
===============================================================================
*A:SRU4>show>router>rsvp#

neighbor

Syntax 
neighbor [ip-address] [detail]
Context 
show>router>rsvp
Description 

This command shows neighbor information.

Parameters 
ip-address—
Displays RSVP information about the specified IP address.
detail
Displays detailed information.
Output 

Sample Output
*A:Dut-A>config>router>mpls>lsp$ /show router rsvp neighbor
=======================================================================
RSVP Neighbors
=======================================================================
Legend :
LR - Local Refresh Reduction RR - Remote Refresh Reduction
LD - Local Reliable Delivery RM - Remote Node supports Message ID
LG - Local Graceful Restart RG - Remote Graceful Restart
=======================================================================
Neighbor Interface Hello Last Oper Flags
Change
=======================================================================
10.20.1.2 ip-10.10.1.1 N/A 0d 00:00:44
10.20.1.3 ip-10.10.2.1 N/A 0d 00:00:44
-----------------------------------------------------------------------
Neighbors : 2
-----------------------------------------------------------------------
*A:Dut-A>config>router>mpls>lsp$
*A:SR1# show router rsvp neighbor detail
===============================================================================
RSVP Neighbors (Detailed)
===============================================================================
Legend :
LR - Local Refresh Reduction RR - Remote Refresh Reduction
LD - Local Reliable Delivery RM - Remote Node supports Message ID
LG - Local Graceful Restart RG - Remote Graceful Restart
===============================================================================
-------------------------------------------------------------------------------
Neighbor : 30.30.30.2
-------------------------------------------------------------------------------
Interface : int_SR1_SR3 Hello State : Up
Last Oper Change : 0d 00:01:02 Flags :
Source Instance : 0x6c8b7 Dst. Instance : 0x530f8e0
Hello Refresh Time : 2 secs Hello Timeout Time : 8 secs
Hello Timeout Cnt : 0 Inst. Mismatch Cnt : 0
Srefresh Time Rem. : 0 secs Epoch Num Rx : 0
Max Msg Id Rx : 0 Out of order Msgs : 0
Retransmitted Msgs : 0 GR Helper : Disabled
GR Proc Invoked Cnt: 0 GR Helper State : None
GR Helper Time Rem : N/A GR Nbr Restart Cap : N/A
GR Nbr Restart Time: N/A GR Nbr Recvry Time : N/A
==============================================================================
*B:edge13# show router rsvp neighbor
========================================================================
RSVP Neighbors
========================================================================
Legend :
LR - Local Refresh Reduction RR - Remote Refresh Reduction
LD - Local Reliable Delivery RM - Remote Node supports Message ID
LG - Local Graceful Restart RG - Remote Graceful Restart
========================================================================
Neighbor Interface Hello Last Oper Flags Change
========================================================================
10.11.101.2 e13c2_1 Up 1d 00:52:56 LR RR LD RM
LG RG
10.11.102.2 e13c2_2 Up 1d 00:52:56 LR RR LD RM
10.11.103.3 e13s1_1 Up 1d 00:52:54 LR RR LD RM
LG
10.11.104.3 e13s1_2 Up 1d 00:52:56
10.11.105.4 e13s2_1 Up 1d 00:52:56
10.11.106.4 e13s2_2 Up 1d 00:52:56
------------------------------------------------------------------------
Neighbors : 6

session

Syntax 
session session-type [from ip-address | to ip-address | lsp-name name] [status {up | down}] [detail]
Context 
show>router>rsvp
Description 

This command shows RSVP session information.

Parameters 
session session-type—
Specifies the session type.
Values—
originate, transit, terminate, detour, detour-transit, detour-terminate, bypass-tunnel
from ip-address—
Specifies the IP address of the originating router.
to ip-address—
Specifies the IP address of the egress router.
lsp-name name —
Specifies the name of the LSP used in the path.
status up
Specifies to display a session that is operationally up.
status down
Specifies to display a session that is operationally down.
detail
Displays detailed information.
Output 

RSVP Session Output

Table 24 describes RSVP session output fields.

Table 24:  RSVP Session Output Fields  

Label

Description  

From

The IP address of the originating router.

To

The IP address of the egress router.

Tunnel ID

The IP address of the tunnel’s ingress node supporting this RSVP session.

LSP ID

The ID assigned by the agent to this RSVP session.

Name

The administrative name assigned to the RSVP session by the agent.

State

Down — The operational state of this RSVP session is down.

Up — The operational state of this RSVP session is up.

Sample Output
*A:SRU4>show>router>rsvp# session
===============================================================================
RSVP Sessions
===============================================================================
From To Tunnel LSP Name State
ID ID
-------------------------------------------------------------------------------
110.20.1.5 110.20.1.4 18 27648 b4-1::b4-1 Up
110.20.1.5 110.20.1.4 1 37902 gsr::gsr Up
110.20.1.5 10.20.1.22 11 53760 to_10_20_1_22_cspf::to_10_2* Up
110.20.1.4 10.20.1.20 146 17920 to_10_20_1_20_cspf_3::to_10* Up
110.20.1.4 10.20.1.20 145 34816 to_10_20_1_20_cspf_2::to_10* Up
110.20.1.4 10.20.1.20 147 45056 to_10_20_1_20_cspf_4::to_10* Up
110.20.1.4 10.20.1.20 148 6656 to_10_20_1_20_cspf_5::to_10* Up
110.20.1.4 10.20.1.20 149 58880 to_10_20_1_20_cspf_6::to_10* Up
110.20.1.4 10.20.1.20 150 13312 to_10_20_1_20_cspf_7::to_10* Up
110.20.1.4 10.20.1.20 152 40448 to_10_20_1_20_cspf_9::to_10* Up
110.20.1.4 10.20.1.20 154 27648 to_10_20_1_20_cspf_11::to_1* Up
110.20.1.4 10.20.1.20 155 12288 to_10_20_1_20_cspf_12::to_1* Up
110.20.1.4 10.20.1.20 151 46080 to_10_20_1_20_cspf_8::to_10* Up
110.20.1.4 10.20.1.20 153 512 to_10_20_1_20_cspf_10::to_1* Up
110.20.1.4 10.20.1.22 164 62464 to_10_20_1_22_cspf_2::to_10* Up
110.20.1.4 10.20.1.20 156 37888 to_10_20_1_20_cspf_13::to_1* Up
110.20.1.4 10.20.1.20 157 24064 to_10_20_1_20_cspf_14::to_1* Up
110.20.1.4 10.20.1.20 158 19968 to_10_20_1_20_cspf_15::to_1* Up
110.20.1.4 10.20.1.20 161 59904 to_10_20_1_20_cspf_18::to_1* Up
...
110.20.1.3 110.20.1.4 54 23088 to_110_20_1_4_cspf_4::to_11* Up
-------------------------------------------------------------------------------
Sessions : 1976
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SRU4>show>router>rsvp#
A:ALA-12# show router rsvp session lsp-name A_C_2::A_C_2 status up
===============================================================================
RSVP Sessions
===============================================================================
From To Tunnel LSP Name State
ID ID
-------------------------------------------------------------------------------
10.20.1.1 10.20.1.3 2 40 A_C_2::A_C_2 Up
-------------------------------------------------------------------------------
Sessions : 1
===============================================================================
A:ALA-12#
*A:SRU4>show>router>rsvp# session detail
===============================================================================
RSVP Sessions (Detailed)
===============================================================================
-------------------------------------------------------------------------------
LSP : b4-1::b4-1
-------------------------------------------------------------------------------
From : 110.20.1.5 To : 110.20.1.4
Tunnel ID : 18 LSP ID : 27648
Style : FF State : Up
Session Type : Terminate
In Interface : 3/2/1 Out Interface : n/a
In Label : 131071 Out Label : n/a
Previous Hop : 10.100.30.20 Next Hop : n/a
SetupPriority : 7 Hold Priority : 0
Class Type : 0
SubGrpOrig ID : 0 SubGrpOrig Addr: 0.0.0.0
P2MP ID : 0
Path Recd : 7497 Path Sent : 0
Resv Recd : 0 Resv Sent : 1757
Summary messages:
SPath Recd : 0 SPath Sent : 0
SResv Recd : 0 SResv Sent : 0
-------------------------------------------------------------------------------
LSP : gsr::gsr
-------------------------------------------------------------------------------
From : 110.20.1.5 To : 110.20.1.4
Tunnel ID : 1 LSP ID : 37902
Style : FF State : Up
Session Type : Terminate
In Interface : 3/2/7 Out Interface : n/a
In Label : 128547 Out Label : n/a
Previous Hop : 160.60.60.2 Next Hop : n/a
SetupPriority : 7 Hold Priority : 0
Class Type : 0
SubGrpOrig ID : 0 SubGrpOrig Addr: 0.0.0.0
P2MP ID : 0
Path Recd : 5225 Path Sent : 0
Resv Recd : 0 Resv Sent : 1741
Summary messages:
SPath Recd : 0 SPath Sent : 0
SResv Recd : 0 SResv Sent : 0
-------------------------------------------------------------------------------
...
-------------------------------------------------------------------------------
From : 110.20.1.3 To : 110.20.1.4
Tunnel ID : 54 LSP ID : 23088
Style : SE State : Up
Session Type : Terminate
In Interface : aps-1 Out Interface : n/a
In Label : 130409 Out Label : n/a
Previous Hop : 104.104.0.3 Next Hop : n/a
SetupPriority : 7 Hold Priority : 0
Class Type : 0
SubGrpOrig ID : 0 SubGrpOrig Addr: 0.0.0.0
P2MP ID : 0
Path Recd : 1 Path Sent : 0
Resv Recd : 0 Resv Sent : 1
Summary messages:
SPath Recd : 840 SPath Sent : 0
SResv Recd : 0 SResv Sent : 850
===============================================================================
*A:SRU4>show>router
*A:Dut-B# show router rsvp session detour detail
==============================================================================
RSVP Sessions (Detailed)
==============================================================================
LSP : tof919::1_detour
------------------------------------------------------------------------------
From : 10.20.1.2 To : 10.20.1.4
Tunnel ID : 919 LSP ID : 15441
Style : SE State : Up
Session Type : Originate (Detour)
In Interface : n/a Out Interface : 1/1/2:1
In Label : n/a Out Label : 129865
Previous Hop : n/a Next Hop : 10.10.101.4
SetupPriority : 4 Hold Priority : 4
Class Type : 5
SugGrpOrig ID : 0 SubGrpOrig Addr: 0.0.0.0
P2MP ID : 0
Path Recd : 0 Path Sent : 106
Resv Recd : 113 Resv Sent : 0
Summary messages:
SPath Recd : 0 SPath Sent : 0
SResv Recd : 0 SResv Sent : 0
==============================================================================
*A:Dut-B#
*A:Dut-C# show router mpls lsp transit detail
==============================================================================
MPLS LSPs (Transit) (Detail)
------------------------------------------------------------------------------
LSP tof1::sec2
------------------------------------------------------------------------------
From : 10.20.1.2 To : 10.20.1.4
State : Up
SetupPriority : 5 Hold Priority : 5
Class Type : 5
In Interface : lag-1:0 In Label : 131068
Out Interface : 2/1/2 Out Label : 131068
Previous Hop : 10.10.12.2 Next Hop : 10.10.11.4
Reserved BW : 1000 Kbps
==============================================================================
*A:Dut-C#
*A:Dut-B# show router rsvp session detour-terminate detail
==============================================================================
RSVP Sessions (Detailed)
==============================================================================
LSP : tof878::1_detour
------------------------------------------------------------------------------
From : 10.20.1.2 To : 10.20.1.4
Tunnel ID : 878 LSP ID : 14929
Style : SE State : Up
Session Type : Terminate (Detour)
In Interface : lag-1:0 Out Interface : 1/1/2:8
In Label : 131069 Out Label : 127951
Previous Hop : 10.10.12.3 Next Hop : 10.10.108.4
SetupPriority : 4 Hold Priority : 4
Class Type : 5
SugGrpOrig ID : 0 SubGrpOrig Addr: 0.0.0.0
P2MP ID : 0
Path Recd : 128 Path Sent : 0
Resv Recd : 125 Resv Sent : 124
Summary messages:
SPath Recd : 0 SPath Sent : 0
SResv Recd : 0 SResv Sent : 0
==============================================================================
*A:Dut-B#
*A:Dut-B# show router rsvp session bypass-tunnel detail
==============================================================================
RSVP Sessions (Detailed)
==============================================================================
LSP : bypass-link10.10.108.4
------------------------------------------------------------------------------
From : 10.20.1.2 To : 10.10.109.4
Tunnel ID : 4003 LSP ID : 6
Style : FF State : Up
Session Type : Bypass Tunnel
In Interface : n/a Out Interface : 1/1/2:9
In Label : n/a Out Label : 124069
Previous Hop : n/a Next Hop : 10.10.109.4
SetupPriority : 7 Hold Priority : 0
Class Type : 0
SugGrpOrig ID : 0 SubGrpOrig Addr: 0.0.0.0
P2MP ID : 0
Path Recd : 0 Path Sent : 3
Resv Recd : 4 Resv Sent : 0
Summary messages:
SPath Recd : 0 SPath Sent : 0
SResv Recd : 0 SResv Sent : 0
==============================================================================
*A:Dut-B#
*A:Dut-B# show router rsvp session detour detail
==============================================================================
RSVP Sessions (Detailed)
------------------------------------------------------------------------------
LSP : tof919::1_detour
------------------------------------------------------------------------------
From : 10.20.1.2 To : 10.20.1.4
Tunnel ID : 919 LSP ID : 15441
Style : SE State : Up
Session Type : Originate (Detour)
In Interface : n/a Out Interface : 1/1/2:1
In Label : n/a Out Label : 129865
Previous Hop : n/a Next Hop : 10.10.101.4
SetupPriority : 4 Hold Priority : 4
Class Type : 5
SugGrpOrig ID : 0 SubGrpOrig Addr: 0.0.0.0
P2MP ID : 0
Path Recd : 0 Path Sent : 106
Resv Recd : 113 Resv Sent : 0
Summary messages:
SPath Recd : 0 SPath Sent : 0
SResv Recd : 0 SResv Sent : 0
==============================================================================
*A:Dut-B#
*A:Dut-B# show router rsvp session detour-transit detail
==============================================================================
RSVP Sessions (Detailed)
------------------------------------------------------------------------------
LSP : tof919::1_detour
------------------------------------------------------------------------------
From : 10.20.1.2 To : 10.20.1.4
Tunnel ID : 919 LSP ID : 15441
Style : SE State : Up
Session Type : Transit (Detour)
In Interface : lag-1:0 Out Interface : 1/1/2:6
In Label : 131071 Out Label : 127952
Previous Hop : 10.10.12.3 Next Hop : 10.10.106.4
SetupPriority : 4 Hold Priority : 4
Class Type : 5
SugGrpOrig ID : 0 SubGrpOrig Addr: 0.0.0.0
P2MP ID : 0
Path Recd : 119 Path Sent : 123
Resv Recd : 121 Resv Sent : 120
Summary messages:
SPath Recd : 0 SPath Sent : 0
SResv Recd : 0 SResv Sent : 0
==============================================================================
*A:Dut-B#
*A:Dut-B# show router rsvp session detour-terminate detail
==============================================================================
RSVP Sessions (Detailed)
------------------------------------------------------------------------------
LSP : tof878::1_detour
------------------------------------------------------------------------------
From : 10.20.1.2 To : 10.20.1.4
Tunnel ID : 878 LSP ID : 14929
Style : SE State : Up
Session Type : Terminate (Detour)
In Interface : lag-1:0 Out Interface : 1/1/2:8
In Label : 131069 Out Label : 127951
Previous Hop : 10.10.12.3 Next Hop : 10.10.108.4
SetupPriority : 4 Hold Priority : 4
Class Type : 5
SugGrpOrig ID : 0 SubGrpOrig Addr: 0.0.0.0
P2MP ID : 0
Path Recd : 128 Path Sent : 0
Resv Recd : 125 Resv Sent : 124
Summary messages:
SPath Recd : 0 SPath Sent : 0
SResv Recd : 0 SResv Sent : 0
==============================================================================
*A:Dut-B#
*A:Dut-B# show router rsvp session bypass-tunnel detail
==============================================================================
RSVP Sessions (Detailed)
------------------------------------------------------------------------------
LSP : bypass-link10.10.108.4
------------------------------------------------------------------------------
From : 10.20.1.2 To : 10.10.109.4
Tunnel ID : 4003 LSP ID : 6
Style : FF State : Up
Session Type : Bypass Tunnel
In Interface : n/a Out Interface : 1/1/2:9
In Label : n/a Out Label : 124069
Previous Hop : n/a Next Hop : 10.10.109.4
SetupPriority : 7 Hold Priority : 0
Class Type : 0
SugGrpOrig ID : 0 SubGrpOrig Addr: 0.0.0.0
P2MP ID : 0
Path Recd : 0 Path Sent : 3
Resv Recd : 4 Resv Sent : 0
Summary messages:
SPath Recd : 0 SPath Sent : 0
SResv Recd : 0 SResv Sent : 0
==============================================================================
*A:Dut-B#

statistics

Syntax 
statistics
Context 
show>router>rsvp
Description 

This command displays global statistics in the RSVP instance.

Output 

RSVP Statistics Output

Table 25 describes RSVP statistics output fields.

Table 25:  RSVP Statistics Output Fields  

Label

Description  

PATH Timeouts

The total number of path timeouts.

RESV Timeouts

The total number of RESV timeouts.

Sample Output
*A:SR1# /show router rsvp statistics
===============================================================================
RSVP Global Statistics
===============================================================================
PATH Timeouts : 0 RESV Timeouts : 0
GR Helper PATH Tim*: 0 GR Helper RESV Tim*: 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
*A:SRU4>show>router>rsvp# statistics
===============================================================================
RSVP Global Statistics
===============================================================================
PATH Timeouts : 1026 RESV Timeouts : 182
===============================================================================
*A:SRU4>show>router>rsvp#

status

Syntax 
rsvp status
Context 
show>router>rsvp
Description 

This command displays RSVP status.

Output 

RSVP Status

Table 26 describes RSVP status output fields.

Table 26:  RSVP Status Output Fields  

Label

Description  

Admin Status

Down — RSVP is administratively disabled.

Up — RSVP is administratively enabled.

Oper Status

Down — RSVP is operationally down.

Up — RSVP is operationally up.

Keep Multiplier

Displays the keep-multiplier number used by RSVP to declare that a reservation is down or the neighbor is down.

Refresh Time

Displays the refresh-time interval (in s), between the successive Path and Resv refresh messages.

Message Pacing

Enabled — RSVP messages, specified in the max-burst command, are sent in a configured interval, specified in the period command.

Disabled — Message pacing is disabled. RSVP message transmission is not regulated.

Pacing Period

Displays the time interval (in ms), when the router can send the specified number of RSVP messages specified in the rsvp max-burst command.

Max Packet Burst

Displays the maximum number of RSVP messages that are sent in the specified period under normal operating conditions.

Soft Preemption Timer

Displays the time (in s), a node holds on to a reservation for which it has triggered the soft preemption procedure.

Rapid Retransmit

Displays the value of the rapid retransmission interval.

Rapid Retry Limit

Displays the rapid retry limit.

Graceful Shutdown

Specifies whether graceful shutdown of the RSVP node is enabled.

Sample Output
B:# show router rsvp status
========================================================================
RSVP Status
========================================================================
Admin Status : Down Oper Status : Down
Keep Multiplier : 3 Refresh Time : 30 sec
Message Pacing : Disabled Pacing Period : 100 msec
Max Packet Burst : 650 msgs Refresh Bypass : Disabled
Rapid Retransmit : 5 hmsec Rapid Retry Limit : 3
Graceful Shutdown : Disabled SoftPreemptionTimer: 300 sec
Implicit Null Label: Disabled Node-id in RRO : Exclude
P2P Merge Point Ab*: 10 P2MP Merge Point A*: 10
DiffServTE AdmModel: Basic
Percent Link Bw CT0: 100 Percent Link Bw CT4: 0
Percent Link Bw CT1: 0 Percent Link Bw CT5: 0
Percent Link Bw CT2: 0 Percent Link Bw CT6: 0
Percent Link Bw CT3: 0 Percent Link Bw CT7: 0
TE0 -> Class Type : 0 Priority : 0
TE1 -> Class Type : 0 Priority : 1
TE2 -> Class Type : 0 Priority : 2
TE3 -> Class Type : 0 Priority : 3
TE4 -> Class Type : 0 Priority : 4
TE5 -> Class Type : 0 Priority : 5
TE6 -> Class Type : 0 Priority : 6
TE7 -> Class Type : 0 Priority : 7
IgpThresholdUpdate : Disabled
Up Thresholds(%) : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100
Down Thresholds(%) : 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0
Update Timer : N/A
Update on CAC Fail : Disabled
========================================================================
* indicates that the corresponding row element may have been truncated.
========================================================================
RSVP Status
========================================================================
Admin Status : Down Oper Status : Down
Keep Multiplier : 3 Refresh Time : 30 sec
Message Pacing : Disabled Pacing Period : 100 msec
Max Packet Burst : 650 msgs Refresh Bypass : Disabled
Rapid Retransmit : 5 hmsec Rapid Retry Limit : 3
Graceful Shutdown : Disabled SoftPreemptionTimer: 300 sec
GR Max Recovery : 300 sec GR Max Restart : 120 sec
Implicit Null Label: Disabled Node-id in RRO : Exclude
P2P Merge Point Ab*: Disabled P2MP Merge Point A*: Disabled
DiffServTE AdmModel: Basic Entropy Label : Enabled
Percent Link Bw CT0: 100 Percent Link Bw CT4: 0
Percent Link Bw CT1: 0 Percent Link Bw CT5: 0
Percent Link Bw CT2: 0 Percent Link Bw CT6: 0
Percent Link Bw CT3: 0 Percent Link Bw CT7: 0
TE0 -> Class Type : 0 Priority : 0
TE1 -> Class Type : 0 Priority : 1
TE2 -> Class Type : 0 Priority : 2
TE3 -> Class Type : 0 Priority : 3
TE4 -> Class Type : 0 Priority : 4
TE5 -> Class Type : 0 Priority : 5
TE6 -> Class Type : 0 Priority : 6
TE7 -> Class Type : 0 Priority : 7
IgpThresholdUpdate : Disabled
Up Thresholds(%) : 0 15 30 45 60 75 80 85 90 95 96 97 98 99 100
Down Thresholds(%) : 100 99 98 97 96 95 90 85 80 75 60 45 30 15 0
Update Timer : N/A
Update on CAC Fail : Disabled
========================================================================
* indicates that the corresponding row element may have been truncated.

lsp-bfd

Syntax 
lsp-bfd
lsp-bfd local-bfd-discrim bfd-discriminator
lsp-bfd lsp-name lsp-name
Context 
show>test-oam
Description 

This command displays information about Bidirectional Forwarding Detection (BFD) sessions on LSPs.

Parameters 
local-bfd-discrim bfd-discriminator
Displays information about the unique local discriminator for this session.
lsp-name lsp-name
Specifies infomrmation about the specified LSP name.
Output 

Sample Output
A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status : unknown
Replying Node : (None)
Latest Return Code : NoRtnCode (0)
Latest Return Subcode : 3
Local BFD Discriminator : 1 Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests : 2123456789 Rx LSP Ping Requests : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#
A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status : active
Replying Node : 240.241.242.243
Latest Return Code : DSRtrMatchLabel (8)
Latest Return Subcode : 4
Local BFD Discriminator : 1 Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests : 2123456789 Rx LSP Ping Requests : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#
A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status : inactive
Replying Node : f0f1:f2f3:f4f5:f6f7:f8f9:fafb:fcfd:feff
Latest Return Code : DSRtrUnmatchLabel (10)
Latest Return Subcode : 5
Local BFD Discriminator : 1 Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests : 2123456789 Rx LSP Ping Requests : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#
A:bkvm1# show test-oam lsp-bfd local-bfd-discrim 1
-------------------------------------------------------------------------------
LSP Ping Bootstrap and Periodic Verification Information for BFD on an LSP
-------------------------------------------------------------------------------
LSP Name : Z
LSP Path Status : unknown
Replying Node : (None)
Latest Return Code : DSNoMac (16)
Latest Return Subcode : 6
Local BFD Discriminator : 1 Remote BFD Discriminator : 4111222333
Tx LSP Ping Requests : 2123456789 Rx LSP Ping Requests : 3123456789
-------------------------------------------------------------------------------
A:bkvm1#

Tools Commands

bypass-tunnel

Syntax 
bypass-tunnel [lsp-name] plr
Context 
tools>dump>router>mpls
Description 

This command displays information about the MPLS bypass tunnel.

lspinfo

Syntax 
lspinfo
Context 
tools>dump>router>mpls
Description 

This command dumps LSP information for MPLS.

ftn

Syntax 
ftn
Context 
tools>dump>router>mpls
Description 

This command dumps FTN information for MPLS.

ilm

Syntax 
ilm
Context 
tools>dump>router>mpls
Description 

This command dumps ILM information for MPLS.

memory-usage

Syntax 
memory-usage
Context 
tools>dump>router>mpls
Description 

This command dumps memory usage information for MPLS.

adjust-autobandwidth

Syntax 
adjust-autobandwidth [lsp lsp-name [force [bandwidth mbps]]]
Context 
tools>perform>router>mpls
Description 

This command initiates an immediate automatic bandwidth adjustment attempt for either one specific LSP or all active LSPs. The automatic bandwidth adjustment is made to the primary or secondary path of the LSP, whichever is the currently active path. If an LSP is not specified, then the system assumes the command applies to all LSPs. The optional force parameter, which is available only when an LSP is referenced, determines whether adjust-up and adjust-down threshold checks are applied. If force is not specified then the maximum average data rate must differ from the current reservation by more than the adjust-up or adjust-down thresholds, otherwise no bandwidth adjustment occurs. If the force option is specified then, bandwidth adjustment ignores the configured thresholds. If a bandwidth is specified as part of the force option then the bandwidth of the LSP is changed to this specific value, otherwise the bandwidth is changed to the maximum average data rate that has been measured by the system in the current adjust interval.

The adjust-count and maximum average data rate are not reset by the manual auto-bandwidth command, whether or not the bandwidth adjustment succeeds or fails. The overflow count is reset only if the manual auto-bandwidth attempt is successful.

Default 

none

Parameters 
lsp-name—
The name of the LSP to which this command applies. If this parameter is not supplied the command applies to all active LSPs.
Values—
String (32 chars max)
Values—
none
mbps—
The bandwidth that the LSP should be immediately resized to.
Values—
0—100000
Values—
none

cspf

Syntax 
cspf to ip-address
Context 
tools>perform>router>mpls
Description 

This command computes a CSPF path given user constraints.

Output 

Sample Output
*A:Dut-C# /tools perform router mpls cspf to 10.20.1.6
Req CSPF for all ECMP paths
from: this node to: 10.20.1.6 w/(no Diffserv) class: 0 , setup Priority 7, Hold
Priority 0 TE Class: 7
CSPF Path
To : 10.20.1.6
Path 1 : (cost 2000)
Src: 10.20.1.3 (= Rtr)
Egr: unnumbered lnkId 4 -> Ingr: unnumbered lnkId 2
Rtr:   10.20.1.5 (met 1000)
Egr: unnumbered lnkId 3      -> Ingr: unnumbered lnkId 3
Rtr:
10.20.1.6 (met 1000)
Dst: 10.20.1.6 (= Rtr)
Path 2 : (cost 2000)
Src: 10.20.1.3 (= Rtr)
Egr: unnumbered lnkId 5 -> Ingr: unnumbered lnkId 5
Rtr:
10.20.1.4 (met 1000)
Egr: unnumbered lnkId 3 -> Ingr: unnumbered lnkId 2
Rtr:
10.20.1.6 (met 1000)
Dst: 10.20.1.6 (= Rtr)
*A:Dut-C#

force-switch-path

Syntax 
force-switch-path [lsp lsp-name] [path path-name]
Context 
tools>perform>router>mpls
Description 

Use this command to move from a standby path to any other standby path regardless of priority.

The no form of the command reverts to priority path.

Parameters 
lsp-name—
Specifies an existing LSP name to move.
path-name—
Specifies the path name to which to move the specified LSP.

plr

Syntax 
plr
Context 
tools>dump>router>mpls>bypass-tunnel
Description 

Dump the Point of Local Repair (LPR) information for the MPLS bypass tunnel.

Output 

Sample Output
tools dump router mpls bypass-tunnel plr
========================================================================
MPLS Bypass Tunnels
========================================================================
Legend : m - Manual d - Dynamic p - P2mp
========================================================================
To State Out I/F Out Label Reserved Protected Type
BW (Kbps) LSP Count
------------------------------------------------------------------------
10.10.12.1 Up 1/1/4 124181 0 369 d
To : 10.10.12.1 State : Up
Out I/F : 1/1/4 Out Label : 124181
Up Time : 0d 19:24:13 Active Time : n/a
Reserved BW : 0 Kbps Protected LSP Count : 369
Type : Dynamic
SetupPriority : 7 Hold Priority : 0
Class Type : 0 Tunnel Id : 63697
Actual Hops :
10.10.12.2(S) -> 10.10.12.1(S)
Plr List: (Last PlrIdx 2)
--------
PLR List Index = 1
PLR current State = PLRS_CONNECTED
NextNodeSysId = 8.8.8.8
AvoidNodeId = 2.2.2.2
NodeProtect = 2 (Node Protect)
LSP Count = 197
PLR List Index = 2
PLR current State = PLRS_BackupInUse
NextNodeSysId = 8.8.8.8
AvoidNodeId = 2.2.2.2
NodeProtect = 2 (Node Protect)
LSP Count = 203

cspf

Syntax 
cspf to ip-addr [from ip-addr] [bandwidth bandwidth] [include-bitmap bitmap] [exclude-bitmap bitmap] [hop-limit limit] [exclude-address excl-addr [excl-addr...(up to 8 max)]] [use-te-metric] [strict-srlg] [srlg-group grp-id...(up to 8 max)] [exclude-node excl-node-id [excl-node-id..(up to 8 max)]] [skip-interface interface-name] [ds-class-type class-type] [cspf-reqtype req-type] [least-fill-min-thd thd] [setup-priority val] [hold-priority val]
Context 
tools>perform>router>mpls
Description 

This command computes a CSPF path with specified user constraints.

Default 

none

Parameters 
to ip-addr
Specify the destination IP address.
from ip-addr
Specify the originating IP address.
bandwidth bandwidth
Specifies the amount of bandwidth in Mb/s to be reserved.
include-bitmap bitmap
Specifies to include a bit-map that specifies a list of admin groups that should be included during setup.
exclude-bitmap bitmap
Specifies to exclude a bit-map that specifies a list of admin groups that should be included during setup.
hop-limit limit
Specifies the total number of hops a detour LSP can take before merging back onto the main LSP path.
exclude-address ip-addr
Specifies IP addresses, up to 8, that should be included during setup.
use-te-metric—
Specifies the use of the traffic engineering metric used on the interface.
strict-srlg—
Specifies whether to associate the LSP with a bypass or signal a detour if a bypass or detour satisfies all other constraints except the SRLG constraints.
srlg-group grp-id
Specifies up to 8 Shared Risk Loss Groups (SRLGs). An SRLG group represents a set of interfaces which could be subject to the same failures or defects and thus share the same risk of failing.
Values—
0 — 4294967295
exclude-node excl-node-id
specifies a list of address that should be excluded when this LSP is setup.
skip-interface interface-name
Specifies an interface name that should be skipped during setup.
ds-class-type class-type
Specifies the class type (CT) associated with this LSP.
Values—
0 — 7
cspf-reqtype req-type
Specifies the req. type.
Values—
all, random, least-fill
least-fill-min-thd thd
Specifies whether the use of the least-fill path selection method for the computation of the path of this LSP is enabled.
Values—
1 — 100
setup-priority val
Specifies the setup priority to use when insufficient bandwidth is available to setup an LSP.
Values—
0 — 7
hold-priority val
Specifies the hold priority value to use when insufficient bandwidth is available to setup an LSP.
Values—
0 — 7

resignal

Syntax 
resignal {lsp lsp-name path path-name | delay minutes}
resignal {p2mp-lsp p2mp-lsp-name p2mp-instance p2mp-instance-name | p2mp-delay p2mp-minutes}
resignal {p2mp-lsp p2mp-lsp-name p2mp-instance p2mp-instance-name | p2mp-delay p2mp-minutes}
Context 
tools>perform>router>mpls
Description 

This command resignals a specific LSP path. The minutes parameter configures the global timer or all LSPs for resignal. If only lsp-name and path-name are provided, the LSP will be resignaled immediately.

Parameters 
lsp-name—
Specifies an existing LSP name to resignal.
path-name—
Specifies an existing path name to resignal.
delay minutes
Configures the global timer or all LSPs to resignal.
p2mp-lsp p2mp-lsp-name
Specifies an existing point-to-multipoint LSP name (for the .
p2mp-instance p2mp-instance-name
Specifies a name that identifies the P2MP LSP instance
p2mp-delay p2mp-minutes
Specifies the delay time, in minutes.
Values—
0 — 60

resignal-bypass

Syntax 
resignal-bypass {lsp bypass-lsp-name [force] | delay minutes}
Context 
tools>perform>router>mpls
Description 

This command performs a manual re-optimization of a specific dynamic or manual bypass LSP, or of all dynamic bypass LSPs.

The name of a manual bypass LSP is the one provided by the user at configuration time. The name of a dynamic bypass LSP is shown in the output of “show>router>mpls>bypass-tunnel dynamic detail”.

The delay option triggers the global re-optimization of all dynamic bypass LSPs at the expiry of the specified delay. In essence, this option forces the global bypass resignal timer to expire after an amount of time equal to the value of the delay parameter. This option has no affect on a manual bypass LSP.

However, when a specific bypass LSP name is specified, the named dynamic or manual bypass LSP is not signaled and the associations are not evaluated even if the new bypass LSP path has the same cost as the current one. This is a different behavior from that of the similar command for the primary or secondary path of an LSP as a bypass LSP can have a large number of PSB associations.

In the specific case where the name corresponds to a manual bypass LSP, the LSP is torn down and re-signaled using the new path provided by CSPF if no PSB associations exist. If there is one or more PSB association but no PLR is active, the command is failed and the user is asked to explicitly enter the force option. In this case, the manual bypass LSP is torn down and re-signaled, leaving temporarily the associated LSP primary paths unprotected. Finally, if one or more PLRs associated with the manual bypass LSP is active, the command is failed.

Parameters 
lsp bypass-lsp-name [force]
Specifies the name of the dynamic or manual bypass LSP. The force option is required when the name corresponds to a manual bypass LSP and the LSP has PSB associations.
delay minutes
Specifies the time, in minutes, MPLS waits before attempting to re-signal dynamic bypass LSP paths originated on the system.
Values—
0 — 30

revert

Syntax 
revert [lsp lsp-name]
Context 
tools>perform>router>mpls
Description 

Use this command to cause a named LSP, which is currently using a secondary path and for which the revert-timer has been configured, to switch back to using the primary path. Any outstanding revert-timer is canceled.

The primary path must be up for this command to be successful.

Parameters 
lsp-name—
Specifies an existing LSP name to move.

switch-path

Syntax 
switch-path [lsp lsp-name] [path path-name]
Context 
tools>perform>router>mpls
Description 

Use this command to move from a standby (or an active secondary) to another standby of the same priority. If a new standby path with a higher priority or a primary path comes up after the tools perform command is executed, the path re-evaluation command runs and the path is moved to the path specified by the outcome of the re-evaluation.

Parameters 
lsp-name—
Specifies an existing LSP name to move.
path-name—
Specifies the path name to which to move the specified LSP.

te-lspinfo

Syntax 
te-lspinfo [endpoint ip-address] [sender ip-address] [lspid lsp-id] [detail] [p2p | p2p-tid tunnel-id]
te-lspinfo [endpoint ip-address] [sender ip-address] [lspid lsp-id] [detail] [p2p | p2p-tid tunnel-id]{ [phops] [nhops] [s2l ip-address] } }
Context 
tools>dump>router>mpls
Description 

This command displays TE LSP information for MPLS.

Default 

none

Output 

Sample Output
B:Dut-R# tools dump router mpls te-lspinfo
Key P2P: Session(10.10.3.2, 201, 3.3.3.3) Sender(3.3.3.3, 2) PHOP(10.10.3.1), Flags
0x0
Key P2P: Session(10.10.3.1, 1035, 4.4.4.4) Sender(4.4.4.4, 22) PHOP(10.10.11.2), Flags
0x0
Key P2MP: Session(0.0.0.0, 1, 4.4.4.4) Sender(4.4.4.4, 52226) PHOP(0.0.0.0) Flags 0x10
S2L [1] Key: endPoint to 2.2.2.2 subGroupId - 1 subGroupOrigId - 4.4.4.4
S2L [2] Key: endPoint to 10.10.2.2 subGroupId - 3 subGroupOrigId - 4.4.4.4
S2L [3] Key: endPoint to 10.10.13.2 subGroupId - 4 subGroupOrigId - 4.4.4.4
Key P2MP: Session(0.0.0.0, 2, 4.4.4.4) Sender(4.4.4.4, 51714) PHOP(0.0.0.0) Flags 0x10
S2L [1] Key: endPoint to 2.2.2.2 subGroupId - 1 subGroupOrigId - 4.4.4.4
S2L [2] Key: endPoint to 10.10.2.2 subGroupId - 3 subGroupOrigId - 4.4.4.4
S2L [3] Key: endPoint to 10.10.13.2 subGroupId - 4 subGroupOrigId - 4.4.4.4
Key P2MP: Session(0.0.0.0, 3, 4.4.4.4) Sender(4.4.4.4, 53250) PHOP(0.0.0.0) Flags 0x10
*A:Dut-T# tools dump router mpls te-lspinfo p2mp-tid 102 nhops
Key P2MP: Session(0.0.0.0, 102, 4.4.4.4) Sender(4.4.4.4, 3074) PHOP(0.0.0.0) Flags
0x10
--------------------------------------------------------------------------
List of NEXT HOPS
--------------------------------------------------------------------------
NextHop [1] =>
Key: Nhop - isFrr 0, outIf 0, NextHop 0.0.0.0 label - 128843 global Instance 0 is
Leaf node
----------------------------------------------------------------------
Primary NHLFE => outLabel - 0 and NextHop - 0.0.0.0, outIf 0 (0)
Port(NONE) NhIdx 0, ProtNhIdx 0, NumS2L 1
ProtectInstance - 0, ProtectGroup 0
POP
No Backup NHLFEs for this Ltn entry
Mid List : 3428 numS2Ls - 1 (Primary MID),
NextHop [2] =>
Key: Nhop - isFrr 0, outIf 3, NextHop 10.10.13.2 label - 128806 global Instance -
48747
----------------------------------------------------------------------
Primary NHLFE => outLabel - 128806 and NextHop - 10.10.13.2, outIf 3 (126)
Port(9/1/1) NhIdx 4322, ProtNhIdx 2275, NumS2L 1
ProtectInstance - 1, ProtectGroup 126
SWAP
Backup NHLFE => outLabel - 130223 and NextHop - 10.10.3.2, outIf 5 (124)
Port(9/2/3) outPushLabel 128806, NhIdx 5469, ProtNhIdx 0, NumS2L 1
Mid List : 3428 numS2Ls - 1 (Primary MID),
NextHop [3] =>
Key: Nhop - isFrr 0, outIf 4, NextHop 10.10.2.2 label - 128836 global Instance -48974
----------------------------------------------------------------------
Primary NHLFE => outLabel - 128836 and NextHop - 10.10.2.2, outIf 4 (125)
Port(lag-1) NhIdx 4292, ProtNhIdx 2245, NumS2L 2
ProtectInstance - 1, ProtectGroup 125
SWAP
Backup NHLFE => outLabel - 130223 and NextHop - 10.10.3.2, outIf 5 (124)
Port(9/2/3) outPushLabel 128836, NhIdx 5659, ProtNhIdx 0, NumS2L 2
Mid List : 3428 numS2Ls - 1 (Primary MID), 3471 numS2Ls - 1 (Backup MID),
S2L [1] Key: endPoint to 2.2.2.2 subGroupId - 1 subGroupOrigId - 4.4.4.4
S2L [2] Key: endPoint to 3.3.3.3 subGroupId - 2 subGroupOrigId - 4.4.4.4
S2L [3] Key: endPoint to 10.10.2.2 subGroupId - 3 subGroupOrigId - 4.4.4.4
S2L [4] Key: endPoint to 10.10.13.2 subGroupId - 4 subGroupOrigId - 4.4.4.4
Total TeLspInfo Count : 1

tp-interface

Syntax 
tp-interface interface-num
Context 
tools>dump>router>mpls
Description 

This command displays MPLS-TP interface information.

Parameters 
interface-num—
specifies the MPLS-TP interface
Values—
1 to 4294967295
Output 

Sample Output
1-2 (1/1/3) : State Up, Cnt/Tm - Dn: 1/000 00:30:11.150, Up 1/000 00:30:15.160
MEP: ifNum 1 (Validate: Y), ais: Y (txCnt 0)
ais - Flags: 0x1 (R), Timers:

psb

Syntax 
psb
Context 
tools>dump>router>rsvp
Description 

This command displays RSVP information.

Output 

Sample Output
*A:Dut-A>config>router>mpls>lsp$ /tools dump router rsvp psb detail
-----------------------------------------------------------------------
PSB:
P2P: Session (To: 10.20.1.4 - 61441 - 10.20.1.1), Sender (10.20.1.1 - 2) PHop
255.255.255.255
PSB CurrState: BACKUPS_CONNECTED PrevState: BACKUPS_INIT Flags: 0x0
LocalLabel 0 OutLabel 131070
Incoming IfIndex: Interface: Local API(-1)
Refresh interval 0, Send Path refresh in 3 secs, Path Refresh timeout 0 secs
PrevHop: Ctype 1 Addr 255.255.255.255, LIH 0
DnStream Nbr: Addr-> 10.20.1.3 IfIndex ip-10.10.2.1(3)
UpStream Neighbor is NULLP
Session Attribute:
Session Name: bypass-node10.20.1.2
HoldPri: 0 SetupPri: 7 Flags: 0x2
Ctype: 7, IncludeGroup: 0x0 IncludeAllGroup: 0x0 ExcludeGroup: 0x0
ClassType: Absent
TSpec: Flags 0x8000 QOSC 0, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps) MTU: 0
CSPF Hop List: ->
(1) UnnumIfId 3 RtrId 10.20.1.1 EgrAdmGrp 0x0 (Strict)
(2) UnnumIfId 2 RtrId 10.20.1.3 EgrAdmGrp 0x0 (Strict)
(3) UnnumIfId 5 RtrId 10.20.1.4 EgrAdmGrp 0x0 (Strict)
PSB RRO : ->
(1) * Flags : 0x0 : U
(1) * UnInf : 10.20.1.1, 3
PSB SENT RRO : ->
(1) * Flags : 0x0 : U
(1) * UnInf : 10.20.1.1, 3
PSB FILTERSPEC RRO : ->
(1) * Flags : 0x0 : U
(1) * UnInf : 10.20.1.3, 2
(2) * Flags : 0x1 : Global
(2) * Label : 131070
(3) * Flags : 0x0 : U
(3) * UnInf : 10.20.1.4, 5
(4) * Flags : 0x1 : Global
(4) * Label : 131070
PSB ERO : ->
(1) Unnumbered RouterId 10.20.1.1, LinkId 3, Strict
(2) Unnumbered RouterId 10.20.1.3, LinkId 2, Strict
(3) Unnumbered RouterId 10.20.1.4, LinkId 5, Strict
PSB SENT ERO : ->
(1) Unnumbered RouterId 10.20.1.3, LinkId 2, Strict
(2) Unnumbered RouterId 10.20.1.4, LinkId 5, Strict
SendTempl: Sender:10.20.1.1_2
AdSpec Present - Flags: 0x0
AdSpec General
- Service Break bit : 0x0
- IS Hop Count : 0x0
- Path Bandwidth Estimate : 0x0
- Minimum Path latency : 0x0
- Composed path MTU : 0
Num Paths Received :0
Num Paths Transmitted:5
Num Resvs Received :8
Num Resvs Transmitted:0
Num Summmary Paths Received :0
Num Summmary Paths Transmitted:0
Num Summmary Resvs Received :0
Num Summmary Resvs Transmitted:0
Created at 91359 (26 secs back)
-----------------------------------------------------------------------
-----------------------------------------------------------------------
PSB:
P2P: Session (To: 10.20.1.6 - 1 - 10.20.1.1), Sender (10.20.1.1 - 30208) PHop 0.0.0.0
PSB CurrState: PRIMARYS_CONNECTED PrevState: PRIMARYS_INIT Flags: 0x8
LocalLabel 0 OutLabel 131071
Incoming IfIndex: Interface: Local API(-1)
Refresh interval 5, Send Path refresh in 4 secs, Path Refresh timeout 0 secs
PrevHop: Ctype 1 Addr 0.0.0.0, LIH 0
DnStream Nbr: Addr-> 10.20.1.2 IfIndex ip-10.10.1.1(2)
UpStream Neighbor is NULLP
Session Attribute:
Session Name: 1::1
HoldPri: 0 SetupPri: 7 Flags: 0x17
Ctype: 7, IncludeGroup: 0x0 IncludeAllGroup: 0x0 ExcludeGroup: 0x0
ClassType: Absent
TSpec: Flags 0x8000 QOSC 1, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps) MTU: 0
CSPF Hop List: ->
(1) UnnumIfId 2 RtrId 10.20.1.1 EgrAdmGrp 0x0 (Strict)
(2) UnnumIfId 2 RtrId 10.20.1.2 EgrAdmGrp 0x0 (Strict)
(3) UnnumIfId 2 RtrId 10.20.1.4 EgrAdmGrp 0x0 (Strict)
(4) UnnumIfId 2 RtrId 10.20.1.6 EgrAdmGrp 0x0 (Strict)
PSB RRO : ->
(1) * Flags : 0x9 : U LP_AVAIL NODE
(1) * UnInf : 10.20.1.1, 2
PSB SENT RRO : ->
(1) * Flags : 0x0 : U
(1) * UnInf : 10.20.1.1, 2
PSB FILTERSPEC RRO : ->
(1) * Flags : 0x9 : U LP_AVAIL NODE
(1) * UnInf : 10.20.1.2, 2
(2) * Flags : 0x1 : Global
(2) * Label : 131071
(3) * Flags : 0x1 : U LP_AVAIL
(3) * UnInf : 10.20.1.4, 2
(4) * Flags : 0x1 : Global
(4) * Label : 131071
(5) * Flags : 0x0 : U
(5) * UnInf : 10.20.1.6, 2
(6) * Flags : 0x1 : Global
(6) * Label : 131071
PSB ERO : ->
(1) Unnumbered RouterId 10.20.1.2, LinkId 2, Strict
(2) Unnumbered RouterId 10.20.1.4, LinkId 2, Strict
(3) Unnumbered RouterId 10.20.1.6, LinkId 2, Strict
PSB SENT ERO : ->
(1) Unnumbered RouterId 10.20.1.2, LinkId 2, Strict
(2) Unnumbered RouterId 10.20.1.4, LinkId 2, Strict
(3) Unnumbered RouterId 10.20.1.6, LinkId 2, Strict
SendTempl: Sender:10.20.1.1_30208
AdSpec not present
FRR: Flags 0x2 HopLimit 16 SetupPri 7 HoldPri 0 IncludeAny 0x0 ExcludeAny 0x0
IncludeAll 0x0
PLR: Flag (0x166) State PLRS_BYPASS_UP AvoidNodeId 10.20.1.2 inIntf -1 inLabel 0
PLR: FRRRequestCount: 1 CSPFFailures: 0 ProtectionType: NodeProtect
Num Paths Received :0
Num Paths Transmitted:5
Num Resvs Received :5
Num Resvs Transmitted:0
Num Summmary Paths Received :0
Num Summmary Paths Transmitted:0
Num Summmary Resvs Received :0
Num Summmary Resvs Transmitted:0
Created at 91359 (28 secs back)
-----------------------------------------------------------------------
Total PSB Count : 2

rsb

Syntax 
rsb
Context 
tools>dump>router>rsvp
Description 

This command displays RSVP RSB information.

Output 

Sample Output
4)*A:Dut-A>config>router>mpls>lsp$ /tools dump router rsvp rsb detail
-----------------------------------------------------------------------
RSB:
EndPt 10.20.1.4 Tid 61441 XTid 10.20.1.1 Sndr 10.20.1.1 LspId 2 ifIndex 3 NHop
20.20.1.3
Style FF, refresh in 0 secs
RSVP NextHop 20.20.1.3, LIH 3 (TLV: RtrId 10.20.1.3 IntfId 2)
CT Shared Reservation Info:
No Reservation:
FlowSpec :Flags 0x8000 QOSC 1, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps)
CBS 0, EBS 0, RSpecR 0, RSpecS 0 MTU 1500 MPU 20
FwdFlowspec :Flags 0x0 QOSC 0, PDR (0.000 bps), PBS 0.000 bps, CDR (0.000 bps)
CBS 0, EBS 0, RSpecR 0, RSpecS 0 MPU 0
FilterSpec:
Timeout in : 26 secs, LocLabel: 0 Sender: 10.20.1.1 lspId: 2 OutIfId: 0
RRO :
(1) * Flags : 0x0 : U
(1) * UnInf : 10.20.1.3, 2
(2) * Flags : 0x1 : Global
(2) * Label : 131070
(3) * Flags : 0x0 : U
(3) * UnInf : 10.20.1.4, 5
(4) * Flags : 0x1 : Global
(4) * Label : 131070
-----------------------------------------------------------------------
-----------------------------------------------------------------------
RSB:
EndPt 10.20.1.6 Tid 1 XTid 10.20.1.1 Sndr 0.0.0.0 LspId 0 ifIndex 2 NHop 20.20.1.2
Style SE, refresh in 0 secs
RSVP NextHop 20.20.1.2, LIH 2 (TLV: RtrId 10.20.1.2 IntfId 2)
CT Shared Reservation Info:
No Reservation:
FlowSpec :Flags 0x8000 QOSC 1, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps)
CBS 0, EBS 0, RSpecR 0, RSpecS 0 MTU 1496 MPU 20
FwdFlowspec :Flags 0x0 QOSC 0, PDR (0.000 bps), PBS 0.000 bps, CDR (0.000 bps)
CBS 0, EBS 0, RSpecR 0, RSpecS 0 MPU 0
FilterSpec:
Timeout in : 21 secs, LocLabel: 0 Sender: 10.20.1.1 lspId: 30208 OutIfId: 0
RRO :
(1) * Flags : 0x9 : U LP_AVAIL NODE
(1) * UnInf : 10.20.1.2, 2
(2) * Flags : 0x1 : Global
(2) * Label : 131071
(3) * Flags : 0x1 : U LP_AVAIL
(3) * UnInf : 10.20.1.4, 2
(4) * Flags : 0x1 : Global
(4) * Label : 131071
(5) * Flags : 0x0 : U
(5) * UnInf : 10.20.1.6, 2
(6) * Flags : 0x1 : Global
(6) * Label : 131071
-----------------------------------------------------------------------
Total RSB Count : 2

trap-suppress

Syntax 
trap-suppress number-of-traps time-interval
Context 
tools>perform>router>mpls
Description 

This command modifies thresholds for trap suppression. The time-interval parameter is used to suppress traps after a certain number of traps have been raised within the time-interval period of time. By executing this command, there will be no more than number-of-traps within time-interval.

Parameters 
number-of-traps—
Specifies to the number of traps raised within a period of time before suppression occurs.
Values—
100 — 1000, in multiples of 100
time-interval—
Specifies the period of time before trap-suppression can occur, depending upon the number of traps received in that period of time.
Values—
1 — 300

tunnel-interface

Syntax 
[no] tunnel-interface rsvp-p2mp lsp-name [sender sender-address]
Context 
config>router
config>router>igmp
Description 

This command creates a tunnel interface associated with an RSVP P2MP LSP. IPv4 multicast packets are forwarded over the P2MP LSP at the ingress LER based on a static join configuration of the multicast group against the tunnel interface associated with the originating P2MP LSP. At the egress LER, packets of a multicast group are received from the P2MP LSP via a static assignment of the specific <S,G> to the tunnel interface associated with a terminating LSP.

At ingress LER, the tunnel interface identifier consists of a string of characters representing the LSP name for the RSVP P2MP LSP. The user can create one or more tunnel interfaces and associate each to a different RSVP P2MP LSP.

At egress LER, the tunnel interface identifier consists of a couple of string of characters representing the LSP name for the RSVP P2MP LSP followed by the system address of the ingress LER. The LSP name must correspond to a P2MP LSP name configured by the user at the ingress LER. The LSP name string must not contain “::” (two :s) nor contain a “:” (single “:”) at the end of the LSP name. However, a “:” (single “:”) can appear anywhere in the string except at the end of the name.

Default 

none

Parameters 
rsvp-p2mp lsp-name
Specifies the LSP. The LSP name can be up to 32 characters long and must be unique.
sender sender-address
Specifies system address of the ingress LER for the P2MP RSVP LSP.

update-path

Syntax 
update-path {lsp lsp-name path current-path-name new-path new-path-name}
Context 
tools>perform>router>mpls
Description 

This command enables you to instruct MPLS to replace the path of a primary or secondary LSP. The primary or secondary LSP path is indirectly identified via the current-path-name value. The same path name cannot be used more than once in a given LSP name.

This command applies to both CSPF LSP and to a non-CSPF LSP. This command will only work when the specified current-path-name has the adaptive option enabled. The adaptive option can be enabled at the LSP level or the path level.

The new path must have been configured in the CLI or provided via SNMP. The CLI command for entering the path is

configure router mpls path path-name

The command fails if any of the following conditions exist:

  1. The specified current-path-name of this LSP does not have the adaptive option enabled.
  2. The specified new-path-name value does not correspond to a previously defined path.
  3. The specified new-path-name value exists but is being used by any path of the same LSP, including this one.

When you execute this command, MPLS performs the following procedures:

  1. MPLS performs a single MBB attempt to move the LSP path to the new path.
  2. If the MBB is successful, MPLS updates the new path
    1. MPLS writes the corresponding NHLFE in the data path if this path is the current backup path for the primary.
    2. If the current path is the active LSP path, it will update the path, write the new NHLFE in the data path that will cause traffic to switch to the new path.
  3. If the MBB is not successful, the path retains it current value.
  4. The update-path MBB has the same priority as the manual re-signal MBB.

Clear Commands

session

Syntax 
session src-ip ip-address dst-ip ip-address
session src-ip ip-address dst-ip ip-address lsp-rsvp {head | tail} tunnel-id [0..4294967295] lsp-id [0..4294967295]
session mpls-tp lsp-name path {working | protect}
session p2mp-interface interface-name
session src-ip ip-address lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
Context 
clear>router>bfd
Description 

This command clears BFD session information. Clearing the BFD session will cause it to go down and restart. This may cause any client protocols whose state is affected by BFD to go down.

As in the current implementation if clear router router-instance bfd statistics all is executed, then the router-instance is ignored and the clear is applied to all session statistics.

Parameters 
src-ip ip-address
Clears information about the specified source IP address.
dst-ip ip-address
Clears information about the specified destination IP address.
lsp-rsvp {head | tail}
Clears information about the specified link type.
tunnel-id [0..4294967295]
Clears information about the specified tunnel ID.
lsp-id [0..4294967295]
Clears information about the specified LSP ID.
mpls-tp lsp-name
Clears information about the specified MPLS TP LSP.
path {working | protect}
Clears information about the working or protect path.
p2mp-interface interface-name
Clears information about the specified P2MP interface.
rsvp-session-name [256 chars max]
Clears information about the specified RSVP session.

statistics

Syntax 
statistics src-ip ip-address dst-ip a.b.c.d
statistics all
statistics src-ip ip-address dst-ip a.b.c.d lsp-rsvp {head | tail} tunnel-id [0..4294967295] lsp-id [0..4294967295]
statistics mpls-tp lsp-name path {working | protect}
statistics p2mp-interface interface-name
statistics src-ip ip-address lsp-rsvp {head | tail} rsvp-session-name [256 chars max]
Context 
clear>router>bfd
Description 

This command clears BFD statistics.

Parameters 
src-ip ip-address
Clears statistics about the specified source IP address.
dst-ip ip-address
Clears statistics about the specified destination IP address.
all—
Clears all statistics for the BFD instance.
lsp-rsvp {head | tail}
Clears statistics about the specified link type.
tunnel-id [0..4294967295]
Clears statistics about the specified tunnel ID.
lsp-id [0..4294967295]
Clears statistics about the specified LSP ID.
mpls-tp lsp-name
Clears statistics about the specified MPLS TP LSP.
path {working | protect}
Clears statistics about the working or protect path.
p2mp-interface interface-name
Clears statistics about the specified P2MP interface.
rsvp-session-name [256 chars max]
Clears statistics about the specified RSVP session.

interface

Syntax 
interface ip-int-name [statistics]
Context 
clear>router>mpls
Description 

This command resets or clears statistics for MPLS interfaces.

Parameters 
ip-int-name—
The name of an existing IP interface. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
statistics
This parameter clears only statistics.

lsp

Syntax 
lsp lsp-name
Context 
clear>router>mpls
Description 

This command resets and restarts an LSP.

Parameters 
lsp-name—
The name of the LSP to clear up to 64 characters in length.

lsp-autobandwidth

Syntax 
lsp-autobandwidth [lsp-name]
Context 
clear>router>mpls>lsp
Description 

This command clears the following counters/timers, as follows:

  1. The sample count is reset to zero, and the average data rate of the current sample interval is discarded.
  2. The adjust count is reset to zero.
  3. The maximum average data rate is zeroed.
  4. The overflow count is zeroed.

ingress-stats

Syntax 
ingress-statistics
Context 
clear>router>mpls
Description 

This command provides the context for the user to enter the LSP names for the purpose of enabling ingress data path statistics at the terminating node of the LSP (for example, egress LER).

Default 

none

lsp-egress-stats

Syntax 
lsp-egress-stats
lsp-egress-stats lsp-name
Context 
clear>router>mpls
Description 

This command clears MPLS LSP egress statistics information.

lsp-ingress-stats

Syntax 
lsp-ingress-stats
lsp-ingress-stats ip-address lsp lsp-name
lsp-ingress-stats sender-address:lsp-name
Context 
clear>router>mpls
Description 

This command clears MPLS LSP ingress statistics information.

interface

Syntax 
interface ip-int-name statistics
Context 
clear>router>rsvp
Description 

This command resets or clears statistics for an RSVP interface.

Parameters 
ip-int-name—
The name of the IP interface to clear. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
statistics
This parameter clears only statistics.

statistics

Syntax 
statistics
Context 
clear>router>rsvp
Description 

This command clears global statistics for the RSVP instance, for example, clears path and resv timeout counters.

Debug Commands

mpls

Syntax 
mpls [lsp lsp-name] [sender source-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [interface ip-int-name]
no mpls
Context 
debug>router
Description 

This command enables and configures debugging for MPLS.

Parameters 
lsp lsp-name—
Name that identifies the LSP. The LSP name can be up to 32 characters long and must be unique.
sender source-address—
The system IP address of the sender.
endpoint endpoint-address—
The far-end system IP address.
tunnel-id tunnel-id—
The MPLS SDP ID.
Values—
0 — 4294967295
lsp-id lsp-id—
The LSP ID.
Values—
1 — 65535
interface ip-int-name—
Name that identifies the interface. The interface name can be up to 32 characters long and must be unique. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.

event

Syntax 
[no] event
Context 
debug>router>mpls
debug>router>rsvp
Description 

This command enables debugging for specific events.

The no form of the command disables the debugging.

all

Syntax 
all [detail]
no all
Context 
debug>router>mpls>event
debug>router>rsvp>event
Description 

This command debugs all events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about all events.

frr

Syntax 
frr [detail]
no frr
Context 
debug>router>mpls>event
Description 

This command debugs fast re-route events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about re-route events.

iom

Syntax 
iom [detail]
no iom
Context 
debug>router>mpls>event
Description 

This command reports MPLS debug events originating from the XMA.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about MPLS events originating from the XMA.

lsp-setup

Syntax 
lsp-setup [detail]
no lsp-setup
Context 
debug>router>mpls>event
Description 

This command debugs LSP setup events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about LSP setup events.

mbb

Syntax 
mbb [detail]
no mbb
Context 
debug>router>mpls>event
Description 

This command debugs the state of the most recent invocation of the make-before-break (MBB) functionality.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about MBB events.

misc

Syntax 
misc [detail]
no misc
Context 
debug>router>mpls>event
debug>router>rsvp>event
Description 

This command debugs miscellaneous events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about miscellaneous events.

xc

Syntax 
xc [detail]
no xc
Context 
debug>router>mpls>event
Description 

This command debugs cross connect events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about cross connect events.

rsvp

Syntax 
[lsp lsp-name] [sender source-address] [endpoint endpoint-address] [tunnel-id tunnel-id] [lsp-id lsp-id] [interface ip-int-name]
no rsvp
Context 
debug>router
Description 

This command enables and configures debugging for RSVP.

Parameters 
lsp lsp-name—
Name that identifies the LSP. The LSP name can be up to 32 characters long and must be unique.
sender source-address—
The system IP address of the sender.
endpoint endpoint-address—
The far-end system IP address.
tunnel-id tunnel-id—
The RSVP tunnel ID.
Values—
0 — 4294967295
lsp-id lsp-id—
The LSP ID.
Values—
1 — 65535
interface ip-int-name—
The interface name. The interface name can be up to 32 characters long and must be unique. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.

nbr

Syntax 
nbr [detail]
no nbr
Context 
debug>router>rsvp>event
Description 

This command debugs neighbor events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about neighbor events.

path

Syntax 
path [detail]
no path
Context 
debug>router>rsvp>event
Description 

This command debugs path-related events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about path-related events.

resv

Syntax 
resv [detail]
no resv
Context 
debug>router>rsvp>event
Description 

This command debugs RSVP reservation events.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about RSVP reservation events.

te-threshold-update

Syntax 
te-threshold-update
no te-threshold-update
Context 
debug>router>rsvp>event
debug>router>rsvp>ip-int-name>event
Description 

This command debugs the te-threshold-update events.

The no form of this command disables the debugging

packet

Syntax 
[no] packet
Context 
debug>router>rsvp>
Description 

This command enters the syntax to debug packets.

all

Syntax 
all [detail]
no all
Context 
debug>router>rsvp>packet
Description 

This command debugs all packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about all RSVP packets.

hello

Syntax 
hello [detail]
no hello
Context 
debug>router>rsvp>packet
Description 

This command debugs hello packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about hello packets.

path

Syntax 
path [detail]
no path
Context 
debug>router>rsvp>packet
Description 

This command enables debugging for RSVP path packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about path-related events.

patherr

Syntax 
patherr [detail]
no patherr
Context 
debug>router>rsvp>packet
Description 

This command debugs path error packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about path error packets.

pathtear

Syntax 
pathtear [detail]
no pathtear
Context 
debug>router>rsvp>packet
Description 

This command debugs path tear packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about path tear packets.

resv

Syntax 
resv [detail]
no resv
Context 
debug>router>rsvp>packet
Description 

This command enables debugging for RSVP resv packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about RSVP Resv events.

resverr

Syntax 
resverr [detail]
no resverr
Context 
debug>router>rsvp>packet
Description 

This command debugs ResvErr packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about ResvErr packets.

resvtear

Syntax 
resvtear [detail]
no resvtear
Context 
debug>router>rsvp>packet
Description 

This command debugs ResvTear packets.

The no form of the command disables the debugging.

Parameters 
detail—
Displays detailed information about ResvTear packets.