TMS Show Command Reference

Command Hierarchies

Show Commands

show
— filter ip
— ip
— port slot/mda/2 (offramp port)
— port slot/mda/3 (onramp port)
— router
— interface tms-interface-name [detail]
— tms routes [tms-interface interface-name] [family] [active | inactive]
— protocol tms
— route-table summary

Command Descriptions

TMS-Related Show Commands

tms

Syntax 
tms routes [tms-interface interface-name] [family] [active | inactive]
Context 
show>router
Description 

This command displays TMS route information.

Parameters 
routes—
Displays TMS routes.
tms-interface interface-name—
Specifies the interface name, up to 32 chars in length.
family—
Specifies an address family: ipv4 | ipv6
active—
Displays active TMS routes.
inactive—
Displays inactive TMS routes.
Output 

The following is an example output for this command.

Sample Output
*A:Dut-C# show router 1 tms routes
===============================================================================
TMS Routes (IPv4)
===============================================================================
Status Network Next Hop[Interface Name]
-------------------------------------------------------------------------------
Active 100.0.0.1/32 mda-2-1
-------------------------------------------------------------------------------
No. of Routes: 1
===============================================================================

interface

Syntax 
interface tms-interface-name [detail]
Context 
show>router
Description 

This command displays information about the TMS interface.

Parameters 
tms-interface-name—
Specifies the interface name, up to 32 chars in length.
detail—
Specifies displaying of detailed information.
Output 

The following is a sample output for this command.

Sample Output
*A:Dut-C# show router 1 interface "mda-2-1" detail
===============================================================================
Interface Table (Service: 1)
===============================================================================
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name : mda-2-1
Admin State : Up Oper (v4/v6) : Up/Down
Protocols : None
IP Addr/mask : 20.12.0.44/32 Address Type : Primary
IGP Inhibit : Disabled Broadcast Address : Host-ones
HoldUp-Time : 0 Track Srrp Inst : 0
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description : tms-2-1
If Index : 3 Virt. If Index : 3
Last Oper Chg : 09/14/2011 08:39:24 Global If Index : 122
If Type : TMS
Rx Pkts : 13508 Rx Bytes : 864512
Tx Pkts : 13552 Tx Bytes : 867328
Tx Discard Pkts : 0
TMS Health Information
Status : Up
Version : Peakflow TMS 5.6 (build BHDF)
Mitigations : 1
Status message : (Unavailable)
===============================================================================
with
Rx Pkts/Rx Bytes: Offramped traffic counters
Tx Pkts/Tx Bytes: Onramped traffic counters
Tx Discard Pkts: Discarded packets by TMS
It displays the #of pkts dropped while the traffic is getting distributed to various
packet engines for mitigation processing.
It doesn't account for the pkts dropped in HW level.
Status: TMS status could be Up/Down
Version: TMS software version
Mitigations: Number of active mitigations on this TMS
Status message: Not applicable. For future usage.

protocol

Syntax 
protocol tms
Context 
show>router>route-table
Description 

This command displays general information about the TMS route table.

Output 

The following is a sample output for this command.

Sample Output
*A:Dut-C# show router route-table protocol tms
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix[Flags] Type Proto Age Pref
Next Hop[Interface Name] Metric
-------------------------------------------------------------------------------
100.0.0.1/32 Remote TMS 00h23m07s 167
vprn1:mda-2-1 0
-------------------------------------------------------------------------------
No. of Routes: 1
Flags: L = LFA nexthop available B = BGP backup route available
n = Number of times nexthop is repeated
===============================================================================
*A:Dut-C#

route-table

Syntax 
route-table summary
Context 
show>router
Description 

This command displays the router’s route table, in cluding the TMS routes.

Parameters 
summary—
Displays summary information.
Output 

The following is sample output for this command.

Sample Output
*A:Dut-C# show router route-table summary
===============================================================================
Route Table Summary (Router: Base)
===============================================================================
Active Available
-------------------------------------------------------------------------------
Static 5 5
Direct 12 12
Host 0 11
BGP 0 0
BGP (Backup) 0 0
VPN Leak 0 0
OSPF 0 0
ISIS 6 6
ISIS (LFA) 0 0
RIP 0 0
LDP 0 0
Aggregate 0 0
Sub Mgmt 0 0
Managed 0 0
NAT 0 0
TMS 1 1
-------------------------------------------------------------------------------
Total 24 35
===============================================================================
NOTE: ISIS LFA routes and BGP Backup routes are not counted towards the total.

port

Syntax 
port slot/mda/2 (offramp port)
port slot/mda/3 (onramp port)
Context 
show
Description 

This command display TMS offramp and onramp port information.

Parameters 
slot/mda/2—
Specifies the slot MDA 2
slot/mda/3—
Specifies the slot MDA 3
offramp port—
Specifies the offramp port
onramp port—
Specifies the onramp port
Output 

The following is sample output for this command.

Sample Output
*A:Dut-C# show port 2/1/2
===============================================================================
ISA-TMS Port
===============================================================================
Description : TMS
Port : 2/1/2 Admin State : up
Last State Change : 09/14/2011 07:03:49 Oper State : up
Configured Mode : network Net. Egr. Queue *: default
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
                                                   Input Output
-------------------------------------------------------------------------------
Unicast Packets 35365 254
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================
*A:Dut-C#
*A:Dut-C# show port 2/1/3
===============================================================================
ISA-TMS Port
===============================================================================
Description : TMS
Port : 2/1/3 Admin State : up
Last State Change : 09/14/2011 07:03:49 Oper State : up
Configured Mode : network Net. Egr. Queue *: default
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
                                                     Input Output
-------------------------------------------------------------------------------
Unicast Packets 1 35710
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors : 0 Sngl Collisions : 0
FCS Errors : 0 Mult Collisions : 0
SQE Test Errors : 0 Late Collisions : 0
CSE : 0 Excess Collisns : 0
Too long Frames : 0 Int MAC Tx Errs : 0
Symbol Errors : 0 Int MAC Rx Errs : 0
===============================================================================

filter ip

Syntax 
filter ip
Context 
show>filter
Description 

This command isplays IP filter information.

Output 

The following is sample output for this command.

Sample Output
*A:Dut-C# show filter ip
===============================================================================
Configured IP Filters Total: 0
===============================================================================
Filter-Id Scope Applied Description
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
System IP Filters Total: 8
===============================================================================
Filter-Id Description
-------------------------------------------------------------------------------
_tmnx_tms-egr-1/1-F Egress TMS filter
_tmnx_tms-egr-2/1-F Egress TMS filter
_tmnx_tms-egr-2/2-F Egress TMS filter
_tmnx_tms-egr-3/1-F Egress TMS filter
_tmnx_tms-ing-1/1-F Ingress TMS filter
_tmnx_tms-ing-2/2-F Ingress TMS filter
_tmnx_tms-ing-2/1-F Ingress TMS filter
_tmnx_tms-ing-3/1-F Ingress TMS filter
-------------------------------------------------------------------------------
Num IP filters: 8
===============================================================================
*A:Dut-C#

Clear Commands

interface

Syntax 
interface tms-interface-name [statistics]
Context 
clear>router
Description 

This command clears TMS interface statistics or status.

Parameters 
interface-name—
Clears the interface name, up to 32 chars in length.
statistics—
Clears application assurance system and subscriber statistics.

Debug Commands

tms

Syntax 
tms tms-interface tms-interface-name [detail]
Context 
debug>router
Description 

This command enables or disables and configures debugging for Threat Management System information

Parameters 
tms-interface interface-name—
Specifies the interface name, up to 32 chars in length.
detail—
Configures detailed debugging.