7.6. Telemetry Configuration Command Descriptions

This section provides Telemetry configuration command descriptions.

7.6.1. Command Descriptions

The topics in this section include:

  1. System Commands
  2. QoS Commands

7.6.1.1. System Commands

grpc

Syntax 
grpc
Context 
config>system
config>router>sgt-qos>application
Description 

This command enables the context to configure gRPC parameters.

max-msg-size

Syntax 
max-msg-size number
no max-msg-size
Context 
config>system>grpc
Description 

This command configures the maximum gRPC rx message size

Parameters 
number—
Specifies the maximum message size in MB.
Values—
1 to 1024

 

Default—
512

shutdown

Syntax 
no shutdown
Context 
config>system>grpc
Description 

This command disables the gRPC server. The shutdown command is not blocked if there are active gRPC sessions. Shutting down gRPC will terminate all active gRPC sessions.

tls-server-profile

Syntax 
tls-server-profile name
no tls-server-profile
Context 
config>system>grpc
Description 

This command provides the TLS profile name to use for the gRPC server.

Parameters 
name—
The tls-server profile name.
Values—
32 characters maximum

 

7.6.1.2. QoS Commands

dscp

Syntax 
dscp {dscp-value | dscp-name}
Context 
config>router>sgt-qos>application>grpc
Description 

This command configures a DiffServ Code Point (DSCP) name to be used for gRPC.

Parameters 
dscp-value—
Represents the gRPC traffic class.
dscp-name—
Represents the gRPC traffic class.