2.6. IES Show, Clear, and Debug Command Reference

2.6.1. Command Hierarchies

2.6.1.1. Show Commands

show
— service
customer [customer-id [site customer-site-name [associated-subs]]]
egress-label start-label [end-label]
id service-id
all
arp [ip-address] | [mac ieee-address] | [sap sap-id] | [interface ip-int-name] | [sdp sdp-id:vc-id] | [summary]
arp-host [wholesaler service-id] [sap sap-id | interface interface-name | ip-address ip-address[/mask] | mac ieee-address | {[port port-id] [no-inter-dest-id | inter-dest-id inter-dest-id]}] [detail]
arp-host statistics [sap sap-id | interface interface-name]
arp-host summary [interface interface-name | sap]
statistics [policy name] [sap sap-id]
base [msap]
dhcp
lease-state [wholesaler service-id] [sap sap-id | sdp sdp-id:vc-id | interface interface-name | ip-address ip-address [/mask] | chaddr ieee-address | mac iee-address | {[port port-id] [no-inter-dest-id | inter-dest-id inter-dest-id]}] [session {none | ipoe}] [detail]
statistics [[sap sap-id] | [sdp sdp-id:vc-id] | [interface interface-name]]
summary [interface interface-name | saps]
gsmp
neighbors [group name [ip-address]]
sessions [group name]
sessions neighbor ip-address port port-number [association | statistics]
host
statistics [summary] [sap sap-id]
summary [sap sap-id]
interface [{[ip-address | ip-int-name] [interface-type] [detail] [family]} | summary]
sap sap-id [detail]
sap sap-id queue-depth [queue queue-id] [ingress | egress]
sap sap-id queue-group-redirection [ingress | egress]
sdp [sdp-id [:vc-id]] [detail]
sdp far-end {ip-address | ipv6-address} [detail]
sdp sdp-id [vc-id] l2tpv3
sdp sdp-id [:vc-id] static-isids [range-id range-id]
sdp sdp-id [:vc-id] static-isids mfib
sdp sdp-id [:vc-id] [detail] vccv-bfd [session]
sdp sdp-id [:vc-id] mrp
subscriber-hosts [sap sap-id] [ip ip-prefix/prefix-length] [mac ieee-address] [sub-profile sub-profile-name] [sla-profile sla-profile-name] [app-profile app-profile-name] [wholesaler service-id] [address-origin address-origin] [detail]
ingress-label start-label [end-label]
sap-using [msap] [dyn-script] [description]
sap-using [sap sap-id] [vlan-translation | anti-spoof] [description]
sap-using {ingress | egress} atm-td-profile td-profile-id
sap-using {ingress | egress} filter any-filter-id
sap-using {ingress | egress} qos-policy qos-policy-id [msap]
sap-using etree
sdp sdp-id pw-port [pw-port-id]
sdp sdp-id pw-port
sdp sdp-id pw-port [pw-port-id] [statistics]
sdp [consistent | inconsistent | na] egressifs
sdp sdp-id keep-alive-history
sdp far-end {ip-address | ipv6-address} keep-alive-history
sdp [sdp-id] [detail]
sdp far-end {ip-address | ipv6-address} [detail]
service-using [epipe] [ies] [vpls] [vprn] [mirror] [apipe] [fpipe] [ipipe] [cpipe] [etree] [vsd] [b-vpls] [i-vpls] [m-vpls] [sdp sdp-id] [customer customer-id] [origin creation-origin]
subscriber-using [service-id service-id] [sap-id sap-id] [interface ip-int-name] [ip ip-address[/mask]] [mac ieee-address] [sub-profile sub-profile-name] [sla-profile sla-profile-name] [app-profile app-profile-name] [port port-id] [no-inter-dest-id | inter-dest-id intermediate-destination-id]
pw-port [pw-port-id] [detail]
pw-port sdp [sdp-id]
pw-port sdp none
pw-port pw-port-id [statistics]
router [router-instance]
router service-name service-name
dhcp
statistics [ip-int-name | ip-address]
vrrp
instance interface interface-name [vrid virtual-router-id]
instance interface interface-name vrid virtual-router-id ipv6

2.6.1.2. Clear Commands

clear
— router
dhcp
statistics [ip-int-name | ip-address]
interface [ip-int-name | ip-address] [icmp] [urpf-stats] [statistics]
vrrp
interface interface-name [vrid virtual-router-id]
interface interface-name vrid virtual-router-id ipv6
statistics interface interface-name [vrid virtual-router-id]
statistics interface interface-name vrid virtual-router-id ipv6
clear
— service
id service-id
arp-host {all | mac ieee-address | sap sap-id | ip-address ip-address[/mask]}
arp-host {port port-id | {inter-dest-id intermediate-destination-id | no-inter-dest-id} [port port-id]}
arp-host statistics [sap sap-id | interface interface-name]
dhcp
lease-state ip-address ip-address[/mask] [no-dhcp-release]
lease-state mac ieee-address [no-dhcp-release]
lease-state sap sap-id [no-dhcp-release]
lease-state sdp sdp-id:vc-id [no-dhcp-release]
dhcp6
lease-state all [no-dhcp-release]
lease-state ipv6-address ipv6-prefix [/prefix-length] [no-dhcp-release]
lease-state mac ieee-address [no-dhcp-release]
lease-state sap sap-id [no-dhcp-release]
fdb {all | mac ieee-address | sap sap-id | mesh-sdp sdp-id[:vc-id] | spoke-sdp sdp-id:vc-id}
sap sap-id queue-depth [queue queue-id] [ingress | egress]
site name
spoke-sdp sdp-id:vc-id ingress-vc-label
stp

2.6.1.3. Debug Commands

debug
— router
vrrp
[no] events
events interface ip-int-name [vrid virtual-router-id]
events interface ip-int-name vrid virtual-router-id ipv6
[no] packets
packets interface ip-int-name [vrid virtual-router-id]
packets interface ip-int-name vrid virtual-router-id ipv6
— service
id service-id
[no] arp-host
[no] ip ip-address
[no] mac ieee-address
mode {all | dropped-only}
[no] mode
[no] sap sap-id
[no] ip ip-address
[no] mac ieee-address
[no] sap sap-id

2.6.1.4. Monitor Commands

monitor
— router
vrrp
instance interface interface-name vr-id virtual-router-id [ipv6] [interval seconds] [repeat repeat] [absolute| rate]

2.6.2. Command Descriptions

2.6.2.1. IES Show Commands

Note:

The command outputs in the following section are examples only; actual displays may differ depending on supported functionality and user configuration.

customer

Syntax 
customer [customer-id [site customer-site-name [associated-subs]]]
Context 
show>service
Description 

This command displays service customer information.

Parameters 
customer-id—
Displays only information for the specified customer ID.
Values—
1 to 2147483647

 

Default—
Displays all customer IDs.
site customer-site-name
Specifies the customer site which is an anchor point for an ingress and egress virtual scheduler hierarchy.
associated-subs—
Displays information for the associated subscribers.
Output 

The following output is an example of customer information, and Table 13 describes the output fields.

Sample Output
*A:ALA-12# show service customer
==========================================================
Customers
==========================================================
Customer-ID : 1
Contact     : Manager
Description : Default customer
Phone       : (123) 555-1212
 
Customer-ID : 2
Contact     : Tech Support
Description : TiMetra Networks
Phone       : (234) 555-1212
 
Customer-ID : 3
Contact     : Fred
Description : TiMetra Networks
Phone       : (345) 555-1212
 
Customer-ID : 6
Contact     : Ethel
Description : Epipe Customer
Phone       : (456) 555-1212
 
Customer-ID : 7
Contact     : Lucy
Description : ABC Customer
Phone       : (567) 555-1212
 
Customer-ID : 8
Contact     : Customer Service
Description : IES Customer
Phone       : (678) 555-1212
 
Customer-ID : 274
Contact     : Mssrs. Beaucoup
Description : ABC Company
Phone       : 650 123-4567
 
Customer-ID : 94043
Contact     : Test Engineer on Duty
Description : TEST Customer
Phone       : (789) 555-1212
 
------------------------------------------------------
Total Customers : 8
-----------------------------------------------------------
*A:ALA-12#
 
 
*A:ALA-12# show service customer 274
==============================================================================
Customer  274
==============================================================================
Customer-ID : 274
Contact     : Mssrs. Beaucoup
Description : ABC Company
Phone       : 650 123-4567
------------------------------------------------------------------------------
Multi Service Site
------------------------------------------------------------------------------
Site        : west
Description : (Not Specified)
==============================================================================
*A:ALA-12#
 
 
*A:ALA-12# show service customer 274 site west
==============================================================================
Customer  274
==============================================================================
Customer-ID : 274
Contact     : Mssrs. Beaucoup
Description : ABC Company
Phone       : 650 123-4567
------------------------------------------------------------------------------
Multi Service Site
------------------------------------------------------------------------------
Site        : west
Description : (Not Specified)
Assignment  : Card 5
I. Sched Pol: SLA1
E. Sched Pol: (Not Specified)
------------------------------------------------------------------------------
Service Association
------------------------------------------------------------------------------
No Service Association Found.
==============================================================================
*A:ALA-12#
Table 13:  Show Customer Field Descriptions 

Label

Description  

Customer-ID

The ID that uniquely identifies a customer.

Contact

The name of the primary contact person.

Description

Generic information about the customer.

Phone

The phone/pager number to reach the primary contact person.

Total Customers

The total number of customers configured.

Multi-service site

Site

Multi-service site name. A multi-service customer site is a group of SAPs with common origination and termination points.

Description

Information about a specific customer's multi-service site.

Assignment

The port ID, MDA, or card number, where the SAP's that are members of this multi- service site are defined.

I. Sched Pol

The ingress QoS scheduler policy assigned to this multi-service site.

E. Sched Pol

The egress QoS scheduler policy assigned to this multi-service site.

Service Association

Service-ID

The ID that uniquely identifies a service.

SAP

The SAP assigned to the service.

egress-label

Syntax 
egress-label start-label [end-label]
Context 
show>service
Description 

This command displays services using the range of ingress labels. If only the mandatory start-label parameter is specified, only services using the specified label are displayed.

If both start-label and end-label parameters are specified, the services using the range of labels X where start-label <= X <= end-label are displayed.

Use the show router ldp bindings command to display dynamic labels.

Parameters 
start-label—
The starting egress label value for which to display services using the labelrange. If only start-label is specified, services only using start-label are displayed.
Values—
0, 18432 to 131071

 

end-label—
The ending egress label value for which to display services using the labelrange.
Values—
18432 to 131071

 

Output 

The following output is an example of egress label information, and Table 14 describes the output fields.

Sample Output
*A:ALA-12# show service egress-label 0 10000
==============================================================================
Martini Service Labels                                                         
==============================================================================
Svc Id     Sdp Id             Type I.Lbl        E.Lbl                          
------------------------------------------------------------------------------
1          10:1               Mesh 0            0                              
1          20:1               Mesh 0            0                              
1          30:1               Mesh 0            0                              
1          100:1              Mesh 0            0                              
...
1          107:1              Mesh 0            0                              
1          108:1              Mesh 0            0                              
1          300:1              Mesh 0            0                              
1          301:1              Mesh 0            0                              
1          302:1              Mesh 0            0                              
1          400:1              Mesh 0            0                              
100        300:100            Spok 0            0                              
200        301:200            Spok 0            0                              
300        302:300            Spok 0            0                              
400        400:400            Spok 0            0                              
------------------------------------------------------------------------------
Number of Bindings Found : 21
==============================================================================
*A:ALA-12#
Table 14:  Show Service Egress-Label Field Descriptions 

Label

Description  

Svc Id

The value that identifies a service.

Sdp Id

The value that identifies a SDP.

Type

Indicates whether the SDP binding is a spoke or a mesh.

I. Lbl

The VC label used by the far-end device to send packets to this device in this service by the SDP.

E. Lbl

The VC label used by this device to send packets to the far-end device in this service by the SDP.

Number of bindings found

The total number of SDP bindings that exist within the specified egress label range.

ingress-label

Syntax 
ingress-label start-label [end-label]
Context 
show>service
Description 

This command displays services using the range of ingress labels. If only the mandatory start-label parameter is specified, only services using the specified label are displayed.

If both start-label and end-label parameters are specified, the services using the range of labels X where start-label <= X <= end-label are displayed.

For 7750 only, use the show router vprn-service-id ldp bindings command to display dynamic labels.

Parameters 
start-label—
The starting ingress label value for which to display services using the label range. If only start-label is specified, services only using start-label are displayed.
Values—
0, 2048 to 131071

 

end-label—
The ending ingress label value for which to display services using the label range.
Values—
2049 to 131071

 

Default—
The start-label value.
Output 

The following output is an example of ingress label information, and Table 15 describes the output fields.

Sample Output
*A:ALA-12# show service ingress-label 0
==============================================================================
Martini Service Labels                                                         
==============================================================================
Svc Id     Sdp Id             Type I.Lbl        E.Lbl                          
------------------------------------------------------------------------------
1          10:1               Mesh 0            0                              
1          20:1               Mesh 0            0                              
1          30:1               Mesh 0            0                              
1          50:1               Mesh 0            0                              
1          100:1              Mesh 0            0                              
1          101:1              Mesh 0            0                              
1          102:1              Mesh 0            0                              
1          103:1              Mesh 0            0                              
1          104:1              Mesh 0            0                              
1          105:1              Mesh 0            0                              
1          106:1              Mesh 0            0                              
1          107:1              Mesh 0            0                              
1          108:1              Mesh 0            0                              
1          300:1              Mesh 0            0                              
1          301:1              Mesh 0            0                              
1          302:1              Mesh 0            0                              
1          400:1              Mesh 0            0                              
1          500:2              Spok 131070       2001                           
1          501:1              Mesh 131069       2000                           
100        300:100            Spok 0            0                              
200        301:200            Spok 0            0                              
300        302:300            Spok 0            0                              
400        400:400            Spok 0            0                              
------------------------------------------------------------------------------
Number of Bindings Found : 23                                                  
------------------------------------------------------------------------------
*A:ALA-12# 
Table 15:  Show Service Ingress-Label Field Descriptions 

Label

Description  

Svc ID

The service identifier.

SDP Id

The SDP identifier.

Type

Indicates whether the SDP is spoke or mesh.

I.Lbl

The ingress label used by the far-end device to send packets to this device in this service by the SDP.

E.Lbl

The egress label used by this device to send packets to the far-end device in this service by the SDP.

Number of Bindings Found

The number of SDP bindings within the label range specified.

sap-using

Syntax 
sap-using [msap] [dyn-script] [description]
sap-using [sap sap-id] [vlan-translation | anti-spoof] [description]
sap-using [ingress | egress] atm-td-profile td-profile-id
sap-using [ingress | egress] filter any-filter-id
sap-using [ingress | egress] qos-policy qos-policy-id [msap]
sap-using etree
Context 
show>service
Description 

Displays SAP information.

If no optional parameters are specified, the command displays a summary of all defined SAPs. The optional parameters restrict output to only SAPs matching the specified properties.

Parameters 
msap—
Displays MSAPs associated to the service. This parameter applies to the7450 ESS or 7750 SR only.
dyn-script—
Displays dynamic service SAPs information.
description—
Displays SAP description.
sap-id
Specifies the physical port identifier portion of the SAP definition.
vlan-translation—
Displays VLAN translation information.
anti-spoof—
Displays anti-spoof information.
ingress—
Specifies matching an ingress policy.
egress—
Specifies matching an egress policy.
atm-td-profile td-profile-id
Displays SAPs using this traffic description. This parameter only applies to the 7750 SR.
filter-id
The ingress or egress filter policy ID for which to display matching SAPs.
Values—
1 to 65535

 

qos-policy-id
The ingress or egress QoS Policy ID for which to display matching SAPs. This parameter only applies the 7450 ESS and 7750 SR.
Values—
1 to 65535

 

etree—
Specifies matching of SAPs configured as E-Tree SAPs and the corresponding role in the E-Tree services: Leaf-AC, Root-AC or Root-leaf-tag SAPs. SAPs listed as Root-leaf-tag Disabled and Leaf-Ac Disabled function as Root-AC SAPs.
Output 

The following output is an example of SAP information, and Table 16 describes the output fields.

Sample Output

The following is a sample output for the 7450 ESS:

 
*A:ALA-48# show service sap-using sap 2/1/10:0
===============================================================================
Service Access Points Using Port 2/1/10:0
===============================================================================
PortId                          SvcId      Ing.  Ing.    Egr.  Egr.   Adm  Opr
                                           QoS   Fltr    QoS   Fltr
-------------------------------------------------------------------------------
2/1/10:0                        13         1     none    1     none   Up   Down
-------------------------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:ALA-48# 

The following is a sample output for the 7750 SR:

 
*A:ALA-12#  show service sap-using egress atm-td-profile 2 
=============================================================================== 
Service Access Point Using ATM Traffic Profile 2 
=============================================================================== 
PortId SvcId I.QoS I.Fltr E.QoS E.Fltr A.Pol Adm Opr 
------------------------------------------------------------------------------- 
5/1/1:0/11 511111 2 none 2 none none Up Up 
5/1/1:0/12 511112 2 none 2 none none Up Up 
5/1/1:0/13 511113 2 none 2 none none Up Up 
5/1/1:0/14 511114 2 none 2 none none Up Up 
5/1/1:0/15 511115 2 none 2 none none Up Up 
5/1/1:0/16 511116 2 none 2 none none Up Up 
5/1/1:0/17 511117 2 none 2 none none Up Up 
5/1/1:0/18 511118 2 none 2 none none Up Up 
5/1/1:0/19 511119 2 none 2 none none Up Up 
5/1/1:0/20 511120 2 none 2 none none Up Up 
5/1/1:0/21 511121 2 none 2 none none Up Up 
5/1/1:0/22 511122 2 none 2 none none Up Up 
5/1/1:0/23 511123 2 none 2 none none Up Up 
5/1/1:0/24 511124 2 none 2 none none Up Up 
5/1/1:0/25 511125 2 none 2 none none Up Up 
...
=============================================================================== 
*A:ALA-12# 
Table 16:  Show Service SAP-using Field Descriptions 

Label

Description  

Port ID

The ID of the access port where the SAP is defined.

Svc ID

The value that identifies the service.

SapMTU

The SAP MTU value.

Igr.QoS

The SAP ingress QoS policy number specified on the ingress SAP.

Ing.Fltr

The MAC or IP filter policy ID applied to the ingress SAP.

E.QoS

The SAP egress QoS policy number specified on the egress SAP.

Egr.Fltr

The MAC or IP filter policy ID applied to the egress SAP.

A.Pol

The accounting policy ID assigned to the SAP.

Adm

The administrative state of the SAP.

Opr

The actual state of the SAP.

sdp-using

Syntax 
sdp-using [sdp-id[:vc-id] | far-end ip-address]
Context 
show>service
Description 

This command displays services using SDP or far-end address options.

Parameters 
sdp-id—
Displays only services bound to the specified SDP ID.
Values—
1 to 17407

 

vc-id—
Displays information about the virtual circuit identifier.
Values—
1 to 4294967295

 

ip-address
Displays only services matching with the specified far-end IP address.
Default—
Services with any far-end IP address.
Output 

The following output is an example of SDP-using information, and Table 17 describes the output fields.

Sample Output
*A:ALA-1# show service sdp-using 300
===============================================================================
Service Destination Point (Sdp Id : 300)
===============================================================================
SvcId       SdpId               Type Far End        Opr State I.Label  E.Label
-------------------------------------------------------------------------------
1           300:1               Mesh 10.0.0.13      Up        131071   131071
2           300:2               Spok 10.0.0.13      Up        131070   131070
100         300:100             Mesh 10.0.0.13      Up        131069   131069
101         300:101             Mesh 10.0.0.13      Up        131068   131068
102         300:102             Mesh 10.0.0.13      Up        131067   131067
-------------------------------------------------------------------------------
Number of SDPs : 5
===============================================================================
*A:ALA-1#
Table 17:  Show Service Sdp-Using Field Descriptions 

Label

Description  

Svc ID

The service identifier.

Sdp ID

The SDP identifier.

Type

Type of SDP: spoke or mesh.

Far End

The far-end address of the SDP.

Oper State

The operational state of the service.

I.Label

The label used by the far-end device to send packets to this device in this service by this SDP.

E.Label

The label used by this device to send packets to the far-end device in this service by this SDP.

service-using

Syntax 
service-using [epipe] [ies] [vpls] [vprn] [mirror] [apipe] [fpipe] [ipipe] [cpipe] [etree] [vsd] [b-vpls] [i-vpls] [m-vpls] [sdp sdp-id] [customer customer-id] [origin creation-origin]
Context 
show>service
Description 

This command displays the services matching certain usage properties. If no optional parameters are specified, all services defined on the system are displayed.

Parameters 
epipe—
Displays matching Epipe services (applies only to the 7450 ESS and 7750 SR).
ies—
Displays matching IES instances.
vpls—
Displays matching VPLS instances (applies only to the 7450 ESS and 7750 SR).
vprn —
Displays matching VPRN services.
mirror —
Displays mirror services.
apipe—
Displays matching Apipe services. (applies only to the 7450 ESS and 7750 SR).
fpipe—
Displays matching Fpipe services (applies only to the 7450 ESS and 7750 SR).
ipipe—
Displays matching Ipipe services (applies only to the 7450 ESS and 7750 SR).
cpipe—
Displays matching Cpipe services.
etree—
Displays etree service information.
vsd—
Displays VSD service information.
b-vpls—
Displays matching B-VPLS services.
i-vpls—
Displays matching I-VPLS services.
m-vpls—
Displays matching M-VPLS services.
sdp-id
Displays only services bound to the specified SDP ID.
Values—
1 to 17407

 

Default—
Services bound to any SDP ID.
customer-id
Displays services only associated with the specified customer ID.
Values—
1 to 2147483647

 

Default—
Services associated with a customer.
creation-origin—
Specifies the method by which the service was created.
Values—
manual, multi-segment-p-w, dyn-script, vsd

 

Output 

The following output is an example of service-using information, and Table 18 describes the output fields.

Sample Output
A:ALA-48# show service service-using ies
===============================================================================
Services [ies]
===============================================================================
ServiceId    Type      Adm    Opr        CustomerId        Last Mgmt Change
-------------------------------------------------------------------------------
88           IES       Up     Down       8                 07/25/2006 15:46:28
89           IES       Up     Down       8                 07/25/2006 15:46:28
104          IES       Up     Down       1                 07/25/2006 15:46:28
200          IES       Up     Down       1                 07/25/2006 15:46:28
214          IES       Up     Down       1                 07/25/2006 15:46:28
321          IES       Up     Down       1                 07/25/2006 15:46:28
322          IES       Down   Down       1                 07/25/2006 15:46:28
1001         IES       Up     Down       1730              07/25/2006 15:46:28
-------------------------------------------------------------------------------
Matching Services : 8
-------------------------------------------------------------------------------
A:ALA-48#
Table 18:  Show Service Service-Using Field Descriptions 

Label

Description  

Service Id

The value that identifies the service.

Type

Specifies the service type configured for the service ID.

Adm

The administrative state of the service.

Opr

The operating state of the service.

CustomerID

The ID of the customer who owns this service.

Last Mgmt Change

The date and time of the most recent management-initiated change to this service.

subscriber-using

Syntax 
subscriber-using [service-id service-id] [sap-id sap-id] [interface ip-int-name] [ip ip-address[/mask]] [mac ieee-address] [sub-profile sub-profile-name] [sla-profile sla-profile-name] [app-profile app-profile-name] [port port-id] [no-inter-dest-id | inter-dest-id intermediate-destination-id]
Context 
show>service
Description 

This command displays subscribers using certain options.

Parameters 
service-id
Display subscriber information about the specified service ID.
Values—
1 to 2147483648, svc-name: 64 characters max

 

sap-id—
Specifies the physical port identifier portion of the SAP definition.
ip-int-name
Displays subscriber information about the specified interface. 32 characters maximum.
ip-address[/mask]—
Displays subscriber information about the specified IP address.
Values—
ip-address: a.b.c.d
mask: 1 to 32

 

ieee-address
Displays subscriber information about the specified MAC address.
Values—
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx (cannot be all zeros)

 

sub-profile-name
Displays subscriber information about the specified subscriber profile name. 32 characters maximum.
sla-profile-name
Displays subscriber information about the specified SLA profile name. 32 characters maximum.
app-profile-name
Specifies the application profile name. 32 characters maximum.
port-id
Specifies the port ID.
no-inter-dest-id—
Displays the information about no intermediate destination ID.
intermediate-destination-id
Displays information about the specified intermediate destination ID. 32 characters maximum.

id

Syntax 
id service-id
Context 
show>service
Description 

This command displays information for a particular service-id.

Parameters 
service-id—
The unique service identification number to identify the service in the service domain. 64 characters maximum.
Values—
1 to 2148007980

 

all

Syntax 
all
Context 
show>service>id
Description 

This command displays detailed information for all aspects of the service.

Output 

The following output is an example of service id information, and Table 19 describes the output fields.

Sample Output
A:PE# show service id 500 all
 
===============================================================================
Service Detailed Information
===============================================================================
Service Id        : 500                 Vpn Id            : 0
Service Type      : IES
Name              : 500
Description       : (Not Specified)
Customer Id       : 1                   Creation Origin   : manual
Last Status Change: 08/31/2018 16:07:55
Last Mgmt Change  : 08/31/2018 16:07:55
Admin State       : Up                  Oper State        : Up
SAP Count         : 2                   SDP Bind Count    : 0
 
-------------------------------------------------------------------------------
ETH-CFM service specifics
-------------------------------------------------------------------------------
Tunnel Faults     : ignore
 
 
-------------------------------------------------------------------------------
Service Destination Points(SDPs)
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
Service Access Points
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
SAP 1/1/9:1
-------------------------------------------------------------------------------
Service Id         : 500
SAP                : 1/1/9:1                  Encap             : q-tag
Description        : (Not Specified)
Admin State        : Up                       Oper State        : Up
Flags              : None
Multi Svc Site     : None
Last Status Change : 08/31/2018 16:07:55
Last Mgmt Change   : 08/31/2018 16:07:55
Sub Type           : regular
Dot1Q Ethertype    : 0x8100                   QinQ Ethertype    : 0x8100
Split Horizon Group: (Not Specified)
 
Admin MTU          : 1518                     Oper MTU          : 1518
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a
qinq-pbit-marking  : both
Egr Agg Rate Limit : max
Q Frame-Based Acct : Disabled                 Limit Unused BW   : Disabled
Qinq-vlan-                                    Qinq-vlan-
translation        : None                     translation Ids   : None
 
Acct. Pol          : None                     Collect Stats     : Disabled
 
Anti Spoofing      : None                     Dynamic Hosts     : Enabled
Avl Static Hosts   : 0                        Tot Static Hosts  : 0
Calling-Station-Id : n/a
 
Application Profile: None
Transit Policy     : None
AARP Id            : None
 
Oper Group         : (none)                   Monitor Oper Grp  : (none)
Host Lockout Plcy  : n/a
Lag Link Map Prof  : (none)
Bandwidth          : Not-Applicable
Oper DCpu Prot Pol*: _default-access-policy
 
-------------------------------------------------------------------------------
ETH-CFM SAP specifics
-------------------------------------------------------------------------------
Tunnel Faults      : n/a                      AIS               : Disabled
MC Prop-Hold-Timer : n/a
Squelch Levels     : None
Collect Lmm Stats  : Disabled
LMM FC Stats       : None
LMM FC In Prof     : None
 
-------------------------------------------------------------------------------
QOS
-------------------------------------------------------------------------------
Ingress qos-policy : 1                        Egress qos-policy : 1
Ingress FP QGrp    : (none)                   Egress Port QGrp  : (none)
Ing FP QGrp Inst   : (none)                   Egr Port QGrp Inst: (none)
Shared Q plcy      : n/a                      Multipoint shared : Disabled
I. Sched Pol       : (Not Specified)
E. Sched Pol       : (Not Specified)
I. Policer Ctl Pol : (Not Specified)
E. Policer Ctl Pol : (Not Specified)
E. HS Sec. Shaper  : (Not Specified)
I. QGrp Redir. List: (Not Specified)
E. QGrp Redir. List: (Not Specified)
-------------------------------------------------------------------------------
Sap Aggregate Stats
-------------------------------------------------------------------------------
                        Packets                 Octets
 
Ingress
Aggregate Offered     : 0                       0
Aggregate Forwarded   : 0                       0
Aggregate Dropped     : 0                       0
 
Egress
Aggregate Forwarded   : 0                       0
Aggregate Dropped     : 0                       0
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Last Cleared Time     : 08/31/2018 16:19:29
 
                        Packets                 Octets
CPM Ingress           : 0                       0
 
Forwarding Engine Stats
Dropped               : 0                       0
Received Valid        : 0                       0
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Off. Uncolor          : 0                       0
Off. Managed          : 0                       0
 
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Queueing Stats(Egress QoS Policy 1)
Dro. In/InplusProf    : 0                       0
Dro. Out/ExcProf      : 0                       0
For. In/InplusProf    : 0                       0
For. Out/ExcProf      : 0                       0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
                        Packets                 Octets
 
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Egress Queue 1
For. In/InplusProf    : 0                       0
For. Out/ExcProf      : 0                       0
Dro. In/InplusProf    : 0                       0
Dro. Out/ExcProf      : 0                       0
* indicates that the corresponding row element may have been truncated.
 
-------------------------------------------------------------------------------
SAP pw-1:500
-------------------------------------------------------------------------------
Service Id         : 500
SAP                : pw-1:500                 Encap             : q-tag
Description        : (Not Specified)
Admin State        : Up                       Oper State        : Up
Flags              : None
Multi Svc Site     : None
Last Status Change : 08/31/2018 16:09:16
Last Mgmt Change   : 08/31/2018 16:07:55
Sub Type           : regular
Split Horizon Group: (Not Specified)
 
Admin MTU          : 1518                     Oper MTU          : 8660
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a
qinq-pbit-marking  : both
Egr Agg Rate Limit : max
                                              Limit Unused BW   : Disabled
Qinq-vlan-                                    Qinq-vlan-
translation        : None                     translation Ids   : None
 
Acct. Pol          : None                     Collect Stats     : Disabled
 
Anti Spoofing      : None                     Dynamic Hosts     : Enabled
Avl Static Hosts   : 0                        Tot Static Hosts  : 0
Calling-Station-Id : n/a
 
Application Profile: None
Transit Policy     : None
AARP Id            : None
 
Oper Group         : (none)                   Monitor Oper Grp  : (none)
Host Lockout Plcy  : n/a
Lag Link Map Prof  : (none)
Bandwidth          : Not-Applicable
Oper DCpu Prot Pol*: _default-access-policy
 
-------------------------------------------------------------------------------
ETH-CFM SAP specifics
-------------------------------------------------------------------------------
Tunnel Faults      : n/a                      AIS               : Disabled
MC Prop-Hold-Timer : n/a
Squelch Levels     : None
Collect Lmm Stats  : Disabled
LMM FC Stats       : None
LMM FC In Prof     : None
 
-------------------------------------------------------------------------------
QOS
-------------------------------------------------------------------------------
Ingress qos-policy : 1                        Egress qos-policy : 500
Ingress FP QGrp    : (none)                   Egress Port QGrp  : (none)
Ing FP QGrp Inst   : (none)                   Egr Port QGrp Inst: (none)
Shared Q plcy      : n/a                      Multipoint shared : Disabled
I. Sched Pol       : (Not Specified)
E. Sched Pol       : pw-sap
I. Policer Ctl Pol : (Not Specified)
E. Policer Ctl Pol : (Not Specified)
E. HS Sec. Shaper  : (Not Specified)
I. QGrp Redir. List: (Not Specified)
E. QGrp Redir. List: (Not Specified)
-------------------------------------------------------------------------------
Sap Aggregate Stats
-------------------------------------------------------------------------------
                        Packets                 Octets
 
Ingress
Aggregate Offered     : 0                       0
Aggregate Forwarded   : 0                       0
Aggregate Dropped     : 0                       0
 
Egress
Aggregate Forwarded   : 0                       0
Aggregate Dropped     : 0                       0
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Last Cleared Time     : 08/31/2018 16:19:29
 
                        Packets                 Octets
CPM Ingress           : 0                       0
 
Forwarding Engine Stats
Dropped               : 0                       0
Received Valid        : 0                       0
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Off. Uncolor          : 0                       0
Off. Managed          : 0                       0
 
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Queueing Stats(Egress QoS Policy 500)
Dro. In/InplusProf    : 0                       0
Dro. Out/ExcProf      : 0                       0
For. In/InplusProf    : 0                       0
For. Out/ExcProf      : 0                       0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
                        Packets                 Octets
 
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Egress Queue 1
For. In/InplusProf    : 0                       0
For. Out/ExcProf      : 0                       0
Dro. In/InplusProf    : 0                       0
Dro. Out/ExcProf      : 0                       0
* indicates that the corresponding row element may have been truncated.
 
-------------------------------------------------------------------------------
Service Interfaces
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : int
Admin State       : Up                  Oper (v4/v6)      : Up/Down
Down Reason V6    : ifProtoOperDown
Protocols         : None
IP Addr/mask      : 192.168.0.1/24      Address Type      : Primary
IGP Inhibit       : Disabled            Broadcast Address : Host-ones
HoldUp-Time       : 0                   Track Srrp Inst   : 0
Description       : N/A
Ignore Port State : None
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description       : (Not Specified)
If Index          : 4                   Virt. If Index    : 4
Last Oper Chg     : 08/31/2018 16:14:20 Global If Index   : 258
Mon Oper Grp      : None
Srrp En Rtng      : Disabled            Hold time         : N/A
SAP Id            : pw-1:500
TOS Marking       : Untrusted           If Type           : IES
SNTP B.Cast       : False               IES ID            : 500
MAC Address       : d8:2c:ff:00:00:00   Mac Accounting    : Disabled
Ingress stats     : Disabled            IPv6 DAD          : Enabled
TCP MSS V4        : 0                   TCP MSS V6        : 0
ARP Timeout       : 14400s              IPv6 Nbr ReachTime: 30s
ARP Retry Timer   : 5000ms              IPv6 stale time   : 14400s
ARP Limit         : Disabled            IPv6 Nbr Limit    : Disabled
ARP Threshold     : Disabled            IPv6 Nbr Threshold: Disabled
ARP Limit Log Only: Disabled            IPv6 Nbr Log Only : Disabled
ARP Learn Unsolic*: Disabled            ND Learn Unsolici*: None
ARP Proactive Ref*: Disabled            ND Proactive Refr*: None
ARP Populate Host : Disabled            ND Populate Host  : Disabled
ARP Route Tag     : 0                   ND Route tag      : 0
IP MTU            : (default)
IP Oper MTU       : 8660
ARP Populate      : Disabled            Host Conn Verify  : Disabled
SHCV pol IPv4     : None
Cflowd (unicast)  : None                Cflowd (multicast): None
LdpSyncTimer      : None
LSR Load Balance  : system
EGR Load Balance  : both
Vas If Type       : none
TEID Load Balance : Disabled
SPI Load Balance  : Disabled
uRPF Chk          : disabled
uRPF Ipv6 Chk     : disabled
uRPF Select VPRN  : False
PTP HW Assist     : Disabled
Rx Pkts           : 0                   Rx Bytes          : 0
Rx V4 Pkts        : N/A                 Rx V4 Bytes       : N/A
Rx V6 Pkts        : N/A                 Rx V6 Bytes       : N/A
Tx DBcast Dis. Pk*: 0                   Tx DBcast Dis. By*: 0
Mpls Rx Pkts      : 0                   Mpls Rx Bytes     : 0
Mpls Tx Pkts      : 0                   Mpls Tx Bytes     : 0
OperDCpuProtPlcy  : N/A
 
Proxy ARP Details
Rem Proxy ARP     : Disabled            Local Proxy ARP   : Disabled
Policies          : none
 
Proxy Neighbor Discovery Details
Local Pxy ND      : Disabled
Policies          : none
 
DHCP no local server
 
DHCP Details
Description  : (Not Specified)
Admin State       : Down                Lease Populate    : 0
Gi-Addr           : 192.168.0.1*        Gi-Addr as Src Ip : Disabled
* = inferred gi-address from interface IP address
 
Action            : Keep                Trusted           : Disabled
 
DHCP Proxy Details
Admin State       : Down
Lease Time        : N/A
Emul. Server      : Not configured
 
DHCP Relay Proxy Details
Relay ucast       : none
Siaddr ovr        : N/A
 
Subscriber Authentication Details
Auth Policy       : None
 
DHCP6 Relay Details
Description       : (Not Specified)
Admin State       : Down                Lease Populate    : 0
Oper State        : Down                Nbr Resolution    : Disabled
If-Id Option      : None                Remote Id         : Disabled
Src Addr          : Not configured
Python plcy       : (Not Specified)
 
DHCP6 Server Details
Admin State       : Down                Max. Lease States : 8000
 
ISA Tunnel redundant next-hop information
Static Next-Hop   :
Dynamic Next-Hop  :
 
ICMP Details
Redirects        : Number - 100         Time (seconds)   - 10
Unreachables     : Number - 100         Time (seconds)   - 10
TTL Expired      : Number - 100         Time (seconds)   - 10
Parameter Problem: Number - 100         Time (seconds)   - 10
ICMP Mask Reply  : True
 
ICMPv6 Details
Packet Too Big   : Number - 100         Time (seconds)   - 10
Parameter Problem: Number - 100         Time (seconds)   - 10
Redirects        : Number - 100         Time (seconds)   - 10
Time Exceeded    : Number - 100         Time (seconds)   - 10
Unreachables     : Number - 100         Time (seconds)   - 10
 
IPCP Address Extension Details
Peer IP Addr      : Not configured
Peer Pri DNS Addr : Not configured
Peer Sec DNS Addr : Not configured
 
Network Domains Associated
default
 
-------------------------------------------------------------------------------
Admin Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
Srlg Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QoS Queue-Group Redirection Details
-------------------------------------------------------------------------------
Ingress FP QGrp   : (none)              Egress Port QGrp  : (none)
Ing FP QGrp Inst  : (none)              Egr Port QGrp Inst: (none)
 
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name           : int1
Admin State       : Up                  Oper (v4/v6)      : Up/Down
Down Reason V6    : ifProtoOperDown
Protocols         : None
IP Addr/mask      : 20.0.0.1/30         Address Type      : Primary
IGP Inhibit       : Disabled            Broadcast Address : Host-ones
HoldUp-Time       : 0                   Track Srrp Inst   : 0
Description       : N/A
Ignore Port State : None
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description       : (Not Specified)
If Index          : 5                   Virt. If Index    : 5
Last Oper Chg     : 08/31/2018 16:07:55 Global If Index   : 259
Mon Oper Grp      : None
Srrp En Rtng      : Disabled            Hold time         : N/A
SAP Id            : 1/1/9:1
TOS Marking       : Untrusted           If Type           : IES
SNTP B.Cast       : False               IES ID            : 500
MAC Address       : d8:2c:01:01:00:09   Mac Accounting    : Disabled
Ingress stats     : Disabled            IPv6 DAD          : Enabled
TCP MSS V4        : 0                   TCP MSS V6        : 0
ARP Timeout       : 14400s              IPv6 Nbr ReachTime: 30s
ARP Retry Timer   : 5000ms              IPv6 stale time   : 14400s
ARP Limit         : Disabled            IPv6 Nbr Limit    : Disabled
ARP Threshold     : Disabled            IPv6 Nbr Threshold: Disabled
ARP Limit Log Only: Disabled            IPv6 Nbr Log Only : Disabled
ARP Learn Unsolic*: Disabled            ND Learn Unsolici*: None
ARP Proactive Ref*: Disabled            ND Proactive Refr*: None
ARP Populate Host : Disabled            ND Populate Host  : Disabled
ARP Route Tag     : 0                   ND Route tag      : 0
IP MTU            : (default)
IP Oper MTU       : 1500
ARP Populate      : Disabled            Host Conn Verify  : Disabled
SHCV pol IPv4     : None
Cflowd (unicast)  : None                Cflowd (multicast): None
LdpSyncTimer      : None
LSR Load Balance  : system
EGR Load Balance  : both
Vas If Type       : none
TEID Load Balance : Disabled
SPI Load Balance  : Disabled
uRPF Chk          : disabled
uRPF Ipv6 Chk     : disabled
uRPF Select VPRN  : False
PTP HW Assist     : Disabled
Rx Pkts           : 3                   Rx Bytes          : 0
Rx V4 Pkts        : N/A                 Rx V4 Bytes       : N/A
Rx V6 Pkts        : N/A                 Rx V6 Bytes       : N/A
Tx Pkts           : 5                   Tx Bytes          : 530
Tx V4 Pkts        : 5                   Tx V4 Bytes       : 530
Tx V4 Discard Pkts: 0                   Tx V4 Discard Byt*: 0
Tx V6 Pkts        : 0                   Tx V6 Bytes       : 0
Tx V6 Discard Pkts: 0                   Tx V6 Discard Byt*: 0
Tx DBcast Dis. Pk*: 0                   Tx DBcast Dis. By*: 0
Mpls Rx Pkts      : 0                   Mpls Rx Bytes     : 0
Mpls Tx Pkts      : 0                   Mpls Tx Bytes     : 0
OperDCpuProtPlcy  : N/A
 
Proxy ARP Details
Rem Proxy ARP     : Disabled            Local Proxy ARP   : Disabled
Policies          : none
 
Proxy Neighbor Discovery Details
Local Pxy ND      : Disabled
Policies          : none
 
DHCP no local server
 
DHCP Details
Description  : (Not Specified)
Admin State       : Down                Lease Populate    : 0
Gi-Addr           : 20.0.0.1*           Gi-Addr as Src Ip : Disabled
* = inferred gi-address from interface IP address
 
Action            : Keep                Trusted           : Disabled
 
DHCP Proxy Details
Admin State       : Down
Lease Time        : N/A
Emul. Server      : Not configured
 
DHCP Relay Proxy Details
Relay ucast       : none
Siaddr ovr        : N/A
 
Subscriber Authentication Details
Auth Policy       : None
 
DHCP6 Relay Details
Description       : (Not Specified)
Admin State       : Down                Lease Populate    : 0
Oper State        : Down                Nbr Resolution    : Disabled
If-Id Option      : None                Remote Id         : Disabled
Src Addr          : Not configured
Python plcy       : (Not Specified)
 
DHCP6 Server Details
Admin State       : Down                Max. Lease States : 8000
 
ISA Tunnel redundant next-hop information
Static Next-Hop   :
Dynamic Next-Hop  :
 
ICMP Details
Redirects        : Number - 100         Time (seconds)   - 10
Unreachables     : Number - 100         Time (seconds)   - 10
TTL Expired      : Number - 100         Time (seconds)   - 10
Parameter Problem: Number - 100         Time (seconds)   - 10
ICMP Mask Reply  : True
 
ICMPv6 Details
Packet Too Big   : Number - 100         Time (seconds)   - 10
Parameter Problem: Number - 100         Time (seconds)   - 10
Redirects        : Number - 100         Time (seconds)   - 10
Time Exceeded    : Number - 100         Time (seconds)   - 10
Unreachables     : Number - 100         Time (seconds)   - 10
 
IPCP Address Extension Details
Peer IP Addr      : Not configured
Peer Pri DNS Addr : Not configured
Peer Sec DNS Addr : Not configured
 
Network Domains Associated
default
 
-------------------------------------------------------------------------------
Admin Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
 
-------------------------------------------------------------------------------
Srlg Groups
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QoS Queue-Group Redirection Details
-------------------------------------------------------------------------------
Ingress FP QGrp   : (none)              Egress Port QGrp  : (none)
Ing FP QGrp Inst  : (none)              Egr Port QGrp Inst: (none)
===============================================================================
* indicates that the corresponding row element may have been truncated.
A:PE#
Table 19:  Show All Service-ID Field Descriptions 

Label

Description  

Service Detailed Information

Service Id

The service identifier.

VPN Id

The number which identifies the VPN.

Service Type

Specifies the type of service.

SDP Id

The SDP identifier.

Description

Generic information about the service.

Customer Id

The customer identifier.

Last Mgmt Change

The date and time of the most recent management-initiated change to this customer.

SAP Count

The number of SAPs specified for this service.

SDP Bind Count

The number of SDPs bound to this service.

Service Destination Points (SDPs)

SDP Id

The SDP identifier.

Type

Indicates whether this Service SDP binding is a spoke or a mesh.

Admin Path MTU

The largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented.

Oper Path MTU

The actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented.

Delivery

Specifies the type of delivery used by the SDP: GRE or MPLS.

Admin State

The administrative state of this SDP.

Oper State

The operational state of this SDP.

Ingress Label

The label used by the far-end device to send packets to this device in this service by this SDP.

Egress Label

The label used by this device to send packets to the far-end device in this service by this SDP.

Ingress Filter

The ID of the ingress filter policy.

Egress Filter

The ID of the egress filter policy.

Far End

Specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP.

Last Changed

The date and time of the most recent change to this customer.

Signaling

Specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on this SDP.

Admin State

Specifies the operating status of the service.

Oper State

The current status of the service.

Hello Time

Specifies how often the SDP echo request messages are transmitted on this SDP.

Hello Msg Len

Specifies the length of the SDP echo request messages transmitted on this SDP.

Max Drop Count

Specifies the maximum number of consecutive SDP Echo Request messages that can be unacknowledged before the keepalive protocol reports a fault.

Hold Down Time

Specifies the amount of time to wait before the keepalive operating status is eligible to enter the alive state.

SDP Delivery Mechanism

When the SDP type is MPLS, a list of LSPs used to reach the far-end router displays. All the LSPs in the list must terminate at the IP address specified in the far-end field.

If the SDP type is GRE, then the following message displays:

“SDP Delivery Mechanism is not MPLS”.

Number of SDPs

The total number SDPs applied to this service ID.

Service Access Points

Service Id

The service identifier.

Port Id

The ID of the access port where this SAP is defined.

Description

Generic information about the SAP.

Encap

The value of the label used to identify this SAP on the access port.

Admin State

The desired state of the SAP.

Oper State

The operating state of the SAP.

Last Changed

The date and time of the last change.

Admin MTU

The largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented.

Oper MTU

The actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented.

Ingress qos-policy

The SAP ingress QoS policy ID.

Egress qos-policy

The SAP egress QoS policy ID.

Ingress Filter-Id

The SAP ingress filter policy ID.

Egress Filter-Id

The SAP egress filter policy ID.

Multi Svc Site

Indicates the multi-service site that the SAP is a member.

Ingress sched-policy

Indicates the ingress QoS scheduler for the SAP.

Egress sched-policy

Indicates the egress QoS scheduler for the SAP.

Acct. Pol

Indicates the accounting policy applied to the SAP.

Collect Stats

Specifies whether accounting statistics are collected on the SAP.

SAP Statistics

Dropped

The number of packets or octets dropped.

Offered Hi Priority

The number of high priority packets, as determined by the SAP ingress QoS policy.

Offered Low Priority

The number of low priority packets, as determined by the SAP ingress QoS policy.

Forwarded In Profile

The number of in-profile packets or octets (rate below CIR) forwarded.

Forwarded Out Profile

The number of out-of-profile packets or octets (rate above CIR) forwarded.

Queueing Stats

Dropped In Profile

The number of in-profile packets or octets discarded.

Dropped Out Profile

The number of out-of-profile packets or octets discarded.

Forwarded In Profile

The number of in-profile packets or octets (rate below CIR) forwarded.

Forwarded Out Profile

The number of out-of-profile packets or octets (rate above CIR) forwarded.

SAP per Queue stats

Ingress Queue 1

The index of the ingress QoS queue of this SAP.

High priority offered

The packets or octets count of the high priority traffic for the SAP.

High priority dropped

The number of high priority traffic packets/octets dropped.

Low priority offered

The packets or octets count of the low priority traffic.

Low priority dropped

The number of low priority traffic packets/octets dropped.

In profile forwarded

The number of in-profile packets or octets (rate below CIR) forwarded.

Out profile forwarded

The number of out-of-profile octets (rate above CIR) forwarded.

Egress Queue 1

The index of the egress QoS queue of the SAP.

In profile forwarded

The number of in-profile packets or octets (rate below CIR) forwarded.

IPCP Address Extension Details

In profile dropped

The number of in-profile packets or octets dropped for the SAP.

Peer IP Addr

Specifies the remote IP address to be assigned to the far-end of the associated PPP/MLPPP link via IPCP extensions.

Peer Pri DNS Addr

Specifies a unicast IPv4 address for the primary DNS server to be signaled to the far-end of the associate PPP/MLPPP link via IPCP extensions.

Peer Sec DNS Addr

Specifies a unicast IPv4 address for the secondary DNS server to be signaled to the far-end of the associate PPP/MLPPP link via IPCP extensions (optional).

arp

Syntax 
arp [ip-address] | [mac ieee-address] | [sap sap-id] | [interface ip-int-name] | [sdp sdp-id:vc-id] | [summary]
Context 
show>service>id
Description 

Displays the ARP table for the IES instance. The ARP entries are displayed uniquely. Each MAC associated with the child group-interfaces are displayed with each ARP entry. They do not reflect actual ARP entries but are displayed along the interfaces ARP entry for easy lookup.

Parameters 
ieee-address
Displays only ARP entries in the ARP table with the specified 48-bit MAC address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
Values—
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx

 

sap-id
Displays SAP information for the specified SAP ID.
interface—
Specifies matching service ARP entries associated with the IP interface.
ip-address—
The IP address of the interface for which to display matching ARP entries.
Values—
a.b.c.d

 

ip-int-name—
The IP interface name for which to display matching ARPs. 32 characters maximum.
sdp-id—
The SDP identifier.
Values—
1 to 17407

 

vc-id—
The virtual circuit identifier.
Values—
1 to 4294967295

 

Output 
Show Service-ID ARP

The following output is an example of service ID ARP information, and Table 20 describes the output fields.

Sample Output
A:ALA-49# show service id 88 arp
====================================================================================
ARP Table
====================================================================================
IP Address   MAC Address        Type    Expiry       Interface   SAP
------------------------------------------------------------------------------------
10.30.1.1    76:1e:ff:00:01:41  Other   00h00m00s    ies30       lag-1:30
10.31.1.1    76:1e:ff:00:01:41  Other   00h00m00s    ies30       lag-1:30
10.37.1.1    00:00:00:00:00:00  Other   00h00m00s    foo2        n/a
10.20.1.1    76:1e:ff:00:00:00  Other   00h00m00s    s2          subscrib*
             76:1e:ff:00:01:41                       g3          lag-1
10.20.1.10   00:00:aa:aa:aa:dd  Managed 00h00m00s    g3          lag-1:11
10.20.1.11   00:00:aa:aa:aa:dd  Managed 00h00m00s    g3          lag-1:11
10.20.1.12   00:00:aa:aa:aa:dd  Managed 00h00m00s    g3          lag-1:11
10.38.1.1    76:1e:ff:00:00:00  Other   00h00m00s    s3          subscrib*
             76:21:04:01:00:01                       g5          4/1/1
             76:21:04:01:00:01                       g7          4/1/1
10.39.1.1    76:1e:ff:00:00:00  Other   00h00m00s    s3          subscrib*
             76:21:04:01:00:01                       g5          41/1/1
             76:21:04:01:00:01                       g7          4/1/1
10.38.1.2    76:22:07:01:00:01  Managed 00h00m00s    g7          4/1/1:25*
10.38.10.1   76:22:07:01:00:01  Managed 00h00m00s    g7          4/1/1:25*
10.38.99.1   76:22:07:01:00:01  Managed 00h00m00s    g7          4/1/1:25*
====================================================================================
* indicats that the corresponding row element may have been truncated.
A:ALA-49#
Table 20:  Show Service-ID ARP Field Descriptions 

Label

Description  

IP Address

The IP address.

MAC Address

The specified MAC address.

Type

Static — FDB entries created by management.

Learned — Dynamic entries created by the learning process.

OAM — Entries created by the OAM process.

Other — Local entries for the IP interfaces created.

Expiry

The age of the ARP entry.

Interface

The interface applied to the service.

SAP

The SAP ID.

arp-host

Syntax 
arp-host [wholesaler service-id] [sap sap-id | interface interface-name | ip-address ip-address[/mask] | mac ieee-address | {[port port-id] [no-inter-dest-id | inter-dest-id inter-dest-id]}] [detail]
arp-host statistics [sap sap-id | interface interface-name]
arp-host summary [interface interface-name | saps]
Context 
show>service>id
Description 

This command displays ARP host related information.

Parameters 
service-id—
Specifies the wholesaler service ID.
Values—
1 to 2148278316

 

sap-id—
Displays SAP information for the specified SAP ID.
interface-name—
Displays information for the specified IP interface. 32 characters maximum.
ip-address[/mask]—
Shows information for the specified IP address and mask.
Values—
a.b.c.d.
mask: 1 to 32

 

ieee-address—
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
port-id—
Specifies the port ID.
no-inter-dest-id—
Displays the information about no intermediate destination ID.
inter-dest-id—
Displays information about the specified intermediate destination ID.
saps—
Output 

The following output is an example of ARP host information.

Sample Output
*A:Dut-C# show service id 2 arp-host 
===============================================================================
ARP host table, service 2
===============================================================================
IP Address      Mac Address       Sap Id              Remaining           MC   
                                                      Time                Stdby
-------------------------------------------------------------------------------
192.168.1.2     00:80:00:00:00:01 2/1/5:2             00h04m41s                
192.168.1.3     00:80:00:00:00:02 2/1/5:2             00h04m42s                
192.168.1.4     00:80:00:00:00:03 2/1/5:2             00h04m43s                
192.168.1.5     00:80:00:00:00:04 2/1/5:2             00h04m44s                
192.168.1.6     00:80:00:00:00:05 2/1/5:2             00h04m45s                
192.168.1.7     00:80:00:00:00:06 2/1/5:2             00h04m46s                
192.168.1.8     00:80:00:00:00:07 2/1/5:2             00h04m47s                
192.168.1.9     00:80:00:00:00:08 2/1/5:2             00h04m48s                
192.168.1.10    00:80:00:00:00:09 2/1/5:2             00h04m49s                
192.168.1.11    00:80:00:00:00:0a 2/1/5:2             00h04m50s                
-------------------------------------------------------------------------------
Number of ARP hosts : 10
===============================================================================
*A:Dut-C#
 
 
*A:Dut-C# show service id 2 arp-host ip-address 192.168.1.2 detail 
===============================================================================
ARP hosts for service 2
===============================================================================
Service ID           : 2                                                       
IP Address           : 192.168.1.2
MAC Address          : 00:80:00:00:00:01                                       
SAP                  : 2/1/5:2                                                 
Remaining Time       : 00h04m58s                                               
 
Sub-Ident            : "alu_1_2"                                               
Sub-Profile-String   : ""                                                      
SLA-Profile-String   : ""                                                      
App-Profile-String   : ""                                                      
ARP host ANCP-String : ""
ARP host Int Dest Id : ""
RADIUS-User-Name     : "192.168.1.2"
 
Session Timeout (s)  : 301                                                     
Start Time           : 02/09/2009 16:35:07                                     
Last Auth            : 02/09/2009 16:36:34                                     
Last Refresh         : 02/09/2009 16:36:38                                     
Persistence Key      : N/A                                                     
-------------------------------------------------------------------------------
Number of ARP hosts : 1
===============================================================================
*A:Dut-C#
 
 
*A:Dut-C# show service id 2 arp-host statistics                    
==============================================================================
ARP host statistics
==============================================================================
Num Active Hosts             : 20                                             
Received Triggers            : 70                                             
Ignored Triggers             : 10                                             
Ignored Triggers (overload)  : 0                                              
SHCV Checks Forced           : 0                                              
Hosts Created                : 20                                             
Hosts Updated                : 40                                             
Hosts Deleted                : 0                                              
Authentication Requests Sent : 40                                             
==============================================================================
*A:Dut-C#
 
 
*A:Dut-C# show service id 2 arp-host summary    
=============================================================
ARP host Summary, service 2
=============================================================
Sap                    Used        Provided    Admin State                     
-------------------------------------------------------------
sap:2/1/5:2            20          8000        inService     
-------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------
=============================================================
*A:Dut-C#

statistics

Syntax 
statistics [policy name] [sap sap-id]
Context 
show>service>id>authentication
Description 

Displays session authentication statistics for this service.

Parameters 
name
Specifies the subscriber authentication policy statistics to display.
sap-id
Specifies the SAP ID statistics to display.
Output 

The following output is an example of authentication statistics information.

Sample Output
*A:ALA-1# show service id 11 authentication statistics
---------------------------------------------------------------
Authentication statistics
---------------------------------------------------------------
Interface / SAP                 Authentication  Authentication
                                Successful      Failed
---------------------------------------------------------------
abc-11-10.1.0.254               1582            3
---------------------------------------------------------------
Number of entries: 1
===============================================================
*A:ALA-1#

authentication

Syntax 
authentication
Context 
show>service>id
Description 

This command enables the context to display subscriber authentication information.

base

Syntax 
base [msap]
Context 
show>service>id
Description 

This command displays basic information about this IES service.

Parameters 
msap—
Displays MSAPs associated to the service.
Output 

The following output is an example of basic IES service information.

Sample Output
*A:ALA-A# show service id 100 base
---------------------------------------------------------------
Service Basic Information
---------------------------------------------------------------
Service Id        : 100                 Vpn Id            : 100
Service Type      : IES
Description       : Default Ies description for service id 100
Customer Id       : 1
Last Status Change: 08/29/2006 17:44:28
Last Mgmt Change  : 08/29/2006 17:44:28
Admin State       : Up                  Oper State        : Up
SAP Count         : 2
-------------------------------------------------------------------------------
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier                       Type         AdmMTU  OprMTU  Adm     Opr
-------------------------------------------------------------------------------
sap:1/1/3                        null         1514    1514    Up      Up
sap:1/1/4                        null         1514    1514    Up      Up
===============================================================================
*A:ALA-A#

router

Syntax 
router [router-instance]
router service-name service-name
Context 
show
Description 

This command displays router instance information.

Parameters 
router-instance—
Specifies the router name or service ID used to specify the router instance.
Values—

router-instance

router-name | vprn-svc-id

router-name

Base | management | cpm-vr-name | vpls-management

Default: Base

vprn-svc-id

1 to 2147483647

cpm-vr-name

32 characters maximum

 

service-name—
Specifies the service name used to identify the router instance. 64 characters maximum.

dhcp

Syntax 
dhcp
Context 
show>service>id
Description 

This command enables the context to display DHCP information for the specified service.

lease-state

Syntax 
lease-state [wholesaler service-id] [sap sap-id | sdp sdp-id:vc-id | interface interface-name | ip-address ip-address [/mask] | chaddr ieee-address | mac ieee-address | {[port port-id] [no-inter-dest-id | inter-dest-id inter-dest-id]}] [session {none | ipoe}] [detail]
Context 
show>service>id>dhcp
Description 

This command displays DHCP lease state related information.

Parameters 
service-id—
Specifies the service ID of the wholesaler.
Values—
1 to 2148278316, svc-name: 64 characters maximum

 

sap-id—
Specifies the physical port identifier portion of the SAP definition.
sdp-id—
The SDP identifier.
Values—
1 to 17407

 

vc-id —
The virtual circuit ID on the SDP ID for which to display information.
Values—
1 to 4294967295

 

interface-name
Displays information for the specified IP interface.
ip-address[/mask]
Displays information associated with the specified IP address.
ieee-address—
Specifies the source MAC address.
Values—
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx (cannot be all zeros)

 

port-id—
Specifies the port ID.
no-inter-dest-id—
Displays the information about no intermediate destination ID.
inter-dest-id—
Displays information about the specified intermediate destination ID. 32 characters maximum.
session—
Shows DHCPv4 lease states for hosts that are associated with an IPoEsession or for hosts that are not associated with an IPoE session.
Values—
none, ipoe

 

detail—
Displays detailed information.
Output 

The following is a sample output of the dhcp command.

Sample Output
A:ALA-_Dut-A# show service id 13 dhcp lease-state 
===============================================================================
DHCP lease state table, service 13
===============================================================================
IP Address      Mac Address       Sap/Sdp Id          Remaining  Lease    MC   
                                                      LifeTime   Origin   Stdby
-------------------------------------------------------------------------------
10.13.40.1      00:00:00:00:00:13 1/1/1:13            00h00m58s  Radius        
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 
 
 
A:ALA-_Dut-A# show service id 13 dhcp lease-state detail 
===============================================================================
DHCP lease states for service 13
===============================================================================
Service ID           : 13                                                      
IP Address           : 10.13.40.1
Mac Address          : 00:00:00:00:00:13                                       
Interface            : ies-13-10.13.1.1                                        
SAP                  : 1/1/1:13                                                
Remaining Lifetime   : 00h00m58s                                               
Persistence Key      : N/A                                                     
 
Sub-Ident            : "TEST"                                              
Sub-Profile-String   : "ADSL GO"                                               
SLA-Profile-String   : "BE-Video"                                              
Lease ANCP-String    : ""
 
Sub-Ident origin     : Radius                                                  
Strings origin       : Radius                                                  
Lease Info origin    : Radius                                                  
 
Ip-Netmask           : 255.255.0.0                                             
Broadcast-Ip-Addr    : 10.13.255.255                                           
Default-Router       : N/A                                                     
Primary-Dns          : 10.13.254.254                                           
Secondary-Dns        : 10.13.254.253                                           
 
ServerLeaseStart     : 12/24/2006 23:44:07                                     
ServerLastRenew      : 12/24/2006 23:44:07                                     
ServerLeaseEnd       : 12/24/2006 23:45:07                                     
Session-Timeout      : 0d 00:01:00                                             
DHCP Server Addr     : N/A                                                     
 
Persistent Relay Agent Information
  Circuit Id         : ancstb6_Dut-A|13|ies-13-10.13.1.1|0|13
  Remote Id          : stringtest
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 
Routed CO Output Example
A:ALA-_Dut-A# show service id 13 dhcp lease-state 
===============================================================================
DHCP lease state table, service 13
===============================================================================
IP Address      Mac Address       Sap/Sdp Id          Remaining  Lease    MC   
                                                      LifeTime   Origin   Stdby
-------------------------------------------------------------------------------
10.13.40.1      00:00:00:00:00:13 1/1/1:13            00h00m58s  Radius        
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 
 
 
A:ALA-_Dut-A# show service id 13 dhcp lease-state detail 
===============================================================================
DHCP lease states for service 13
===============================================================================
Service ID           : 13                                                      
IP Address           : 10.13.40.1
Mac Address          : 00:00:00:00:00:13                                       
Subscriber-interface : ies-13-10.13.1.1                                        
Group-interface      : intf-13                                                 
SAP                  : 1/1/1:13                                                
Remaining Lifetime   : 00h00m58s                                               
Persistence Key      : N/A                                                     
 
Sub-Ident            : "TEST"                                              
Sub-Profile-String   : "ADSL GO"                                               
SLA-Profile-String   : "BE-Video"                                              
Lease ANCP-String    : ""
 
Sub-Ident origin     : Radius                                                  
Strings origin       : Radius                                                  
Lease Info origin    : Radius                                                  
 
Ip-Netmask           : 255.255.0.0                                             
Broadcast-Ip-Addr    : 10.13.255.255                                           
Default-Router       : N/A                                                     
Primary-Dns          : 10.13.254.254                                           
Secondary-Dns        : 10.13.254.253                                           
 
ServerLeaseStart     : 12/24/2006 23:48:23                                     
ServerLastRenew      : 12/24/2006 23:48:23                                     
ServerLeaseEnd       : 12/24/2006 23:49:23                                     
Session-Timeout      : 0d 00:01:00                                             
DHCP Server Addr     : N/A                                                     
 
Persistent Relay Agent Information
  Circuit Id         : ancstb6_Dut-A|13|intf-13|0|13
  Remote Id          : stringtest
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A# 
 
 
Wholesaler/Retailer Output Example
A:ALA-_Dut-A# show service id 2000 dhcp lease-state detail 
===============================================================================
DHCP lease states for service 2000
-------------------------------------------------------------------------------
Wholesaler 1000 Leases
-------------------------------------------------------------------------------
Service ID           : 1000                                                    
IP Address           : 10.13.1.254
Mac Address          : 00:00:00:00:00:13                                       
Subscriber-interface : whole-sub                                               
Group-interface      : intf-13                                                 
Retailer             : 2000                                                    
Retailer If          : retail-sub                                              
SAP                  : 1/1/1:13                                                
Remaining Lifetime   : 00h09m59s                                               
Persistence Key      : N/A                                                     
 
Sub-Ident            : "TEST"                                              
Sub-Profile-String   : "ADSL GO"                                               
SLA-Profile-String   : "BE-Video"                                              
Lease ANCP-String    : ""
 
Sub-Ident origin     : Retail DHCP                                             
Strings origin       : Retail DHCP                                             
Lease Info origin    : Retail DHCP                                             
 
Ip-Netmask           : 255.255.0.0                                             
Broadcast-Ip-Addr    : 10.13.255.255                                           
Default-Router       : N/A                                                     
Primary-Dns          : N/A                                                     
Secondary-Dns        : N/A                                                     
 
ServerLeaseStart     : 12/25/2006 00:29:41                                     
ServerLastRenew      : 12/25/2006 00:29:41                                     
ServerLeaseEnd       : 12/25/2006 00:39:41                                     
Session-Timeout      : 0d 00:10:00                                             
DHCP Server Addr     : 10.232.237.2                                            
 
Persistent Relay Agent Information
  Circuit Id         : 1/1/1:13
  Remote Id          : stringtest
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
A:ALA-_Dut-A#

statistics

Syntax 
statistics [[sap sap-id] | [sdp sdp-id:vc-id] | [interface interface-name]
Context 
show>service>id>dhcp
Description 

Displays DHCP statistics information.

Parameters 
sap-id—
Specifies the physical port identifier portion of the SAP definition.
sdp-id—
The SDP identifier.
Values—
1 to 17407

 

vc-id —
The virtual circuit ID on the SDP ID for which to display information.
Values—
1 to 4294967295

 

interface-name
Displays information for the specified IP interface. 32 characters maximum.

summary

Syntax 
summary [interface interface-name | saps]
Context 
show>service>id>dhcp
Description 

Displays DHCP configuration summary information.

Parameters 
interface-name—
Specifies the interface name. 32 characters maximum.
saps—
Displays SAPs per interface.
Output 

The following output is an example of DHCP summary information, and Table 21 describes the output fields.

Sample Output (7750 SR)
A:ALA-49# show service id 88 dhcp summary
===============================================================================
DHCP Summary, service 88
===============================================================================
Interface Name                   Arp      Used/                 Info    Admin
  SapId/Sdp                      Populate Provided              Option  State
-------------------------------------------------------------------------------
Sector A                         No       0/0                   Keep    Up
  sap:7/1/1.2.2                           0/0
grp-if                           No       0/1                   Keep    Down
  sap:2/2/2:0                             0/1
  sap:2/2/2:0                             0/1
test                             No       0/0                   Keep    Up
  sap:10/1/2:0                            0/0
-------------------------------------------------------------------------------
Interfaces: 3
===============================================================================
A:ALA-49#
Sample Output (7450 ESS)
A:ALA-49# show service id 88 dhcp summary
===============================================================================
DHCP Summary, service 88
===============================================================================
Interface Name                   Arp      Used/                 Info    Admin
  SapId/Sdp                      Populate Provided              Option  State
-------------------------------------------------------------------------------
Sector A                         No       0/0                   Keep    Up
sap:7/1/1.2.2                           0/0
sap:2/2/2:0                             0/1
test                             No       0/0                   Keep    Up
sap:10/1/2:0                            0/0
-------------------------------------------------------------------------------
Interfaces: 3
===============================================================================
A:ALA-49#
Table 21:  Show DHCP Summary Field Descriptions 

Label

Description  

Interface Name

Name of the router interface.

Arp Populate

Specifies whether or not ARP populate is enabled.

Used/Provided

Used — The number of lease-states that are currently in use on a specific interface, that is, the number of clients on that interface got an IP address by DHCP. This value is always less than or equal to the ‘Provided’ field.

Provided — The lease-populate value that is configured for a specific interface.

Info Option

Indicates whether Option 82 processing is enabled on the interface.

Admin State

Indicates the administrative state.

gsmp

Syntax 
gsmp
Context 
show>service>id
Description 

This command enables the context to display GSMP information.

neighbors

Syntax 
neighbors [group name [ip-address]]
Context 
show>service>id>gsmp
Description 

This command displays GSMP neighbor information.

Parameters 
group—
A GSMP group defines a set of GSMP neighbors which have the same properties.
name—
Specifies a GSMP group name is unique only within the scope of the service in which it is defined. 32 characters maximum.
ip-address—
Specifies the ip-address of the neighbor.
Values—
a.b.c.d (unicast address only)

 

Output 

These commands show the configured neighbors per service, regardless of the fact there exists an open TCP connection with this neighbor. The admin state is shown because for a neighbor to be admin enabled, the service, gsmp node, group node and the neighbor node in this service must all be in 'no shutdown' state. Session gives the number of session (open TCP connections) for each configured neighbor.

Sample Output

A:active>show>service>id>gsmp# neighbors
============================================================================
GSMP neighbors
============================================================================
Group                           Neighbor           AdminState  Sessions
----------------------------------------------------------------------------
dslam1                          192.168.1.2       Enabled     0
dslam1                          192.168.1.3       Enabled     0
----------------------------------------------------------------------------
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp# 
 
 
A:active>show>service>id>gsmp# neighbors group dslam1
============================================================================
GSMP neighbors
============================================================================
Group                           Neighbor           AdminState  Sessions
----------------------------------------------------------------------------
dslam1                          192.168.1.2       Enabled     0
dslam1                          192.168.1.3       Enabled     0
----------------------------------------------------------------------------
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# neighbors group dslam1 192.168.1.2
============================================================================
GSMP neighbors
============================================================================
Group                           Neighbor           AdminState  Sessions
----------------------------------------------------------------------------
dslam1                          192.168.1.2       Enabled     0
============================================================================
A:active>show>service>id>gsmp#

sessions

Syntax 
sessions [group name]
sessions neighbor ip-address port port-number [association | statistics]
Context 
show>service>id>gsmp
Description 

This command displays GSMP sessions information.

Parameters 
group—
A GSMP group defines a set of GSMP neighbors which have the same properties.
name—
Specifies a GSMP group name is unique only within the scope of the service in which it is defined. 32 characters maximum.
ip-address—
Specifies the ip-address of the neighbor.
Values—
a.b.c.d (unicast address only)

 

port-number—
Specifies the neighbor TCP port number use for this ANCP session.
Values—
0 to 65535

 

association—
Displays to what object the ANCP-string is associated.
statistics—
Displays statistics information about an ANCP session known to the system.
Output 

The following output gives information about the open TCP connections with DSLAMs.

Sample Output
A:active>show>service>id>gsmp# sessions
=======================================================
GSMP sessions for service 999 (VPRN)
=======================================================
Port   Ngbr-IpAddr     Gsmp-Group
-------------------------------------------------------
40590  192.168.1.2     dslam1
-------------------------------------------------------
Number of GSMP sessions : 1
=======================================================
A:active>show>service>id>gsmp#
 
 
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590
=========================================================================
GSMP sessions for service 999 (VPRN), neighbor 192.168.1.2, Port 40590 
=========================================================================
State           : Established
Peer Instance   : 1                  Sender Instance : a3cf58
Peer Port       : 0                  Sender Port     : 0
Peer Name       : 12:12:12:12:12:12  Sender Name     : 00:00:00:00:00:00
timeouts        : 0                  Max. Timeouts   : 3
Peer Timer      : 100                Sender Timer    : 100
Capabilities      : DTD OAM
Conf Capabilities : DTD OAM
Priority Marking  : dscp nc2
Local Addr.       : 192.168.1.4
Conf Local Addr.  : N/A
=========================================================================
A:active>show>service>id>gsmp# 
 
 
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 association
===============================================================================
ANCP-Strings
===============================================================================
ANCP-String                                                 Assoc. State
-------------------------------------------------------------------------------
No ANCP-Strings found
===============================================================================
A:active>show>service>id>gsmp# 
 
 
A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 statistics
===============================================================
GSMP session stats, service 999 (VPRN), neighbor 192.168.1.2, Port 40590 
===============================================================
Event                                   Received  Transmitted
---------------------------------------------------------------
Dropped                                 0         0
Syn                                     1         1
Syn Ack                                 1         1
Ack                                     14        14
Rst Ack                                 0         0
Port Up                                 0         0
Port Down                               0         0
OAM Loopback                            0         0
===============================================================
A:active>show>service>id>gsmp# 
 

The association command gives an overview of each ANCP string received from this session (applies only to the 7450 ESS and 7750 SR).

A:active>show>service>id>gsmp# sessions neighbor 192.168.1.2 port 40590 association
===============================================================================
ANCP-Strings
===============================================================================
ANCP-String                                                     Assoc. 
State
-------------------------------------------------------------------------------
7330-ISAM-E47 atm 1/1/01/01:19425.64048                         ANCP    Up
-------------------------------------------------------------------------------
Number of ANCP-Strings : 1
===============================================================================
A:active>show>service>id>gsmp# 

host

Syntax 
host
Context 
show>service>id
Description 

Displays static hosts configured for this IES service.

Output 

The following output is an example of host information, and Table 22 describes the output fields.

Sample Output
*A:ALA-48# show service id 88  host
===============================================================================
Static Hosts for service 88
===============================================================================
Sap                         IP Address      Configured MAC    Dynamic MAC
  Subscriber                                                    Fwding state
-------------------------------------------------------------------------------
1/2/4:50/5                  10.144.145.1    N/A               N/A
   N/A                                                          Fwding
-------------------------------------------------------------------------------
Number of static hosts : 1
===============================================================================
*A:ALA-48#
Table 22:  Show All Service-ID Field Descriptions 

Label

Description  

Service Id

The service identifier.

VPN Id

The number which identifies the VPN.

Service Type

Specifies the type of service.

SDP Id

The SDP identifier.

Description

Generic information about the service.

Customer Id

The customer identifier.

Last Mgmt Change

The date and time of the most recent management-initiated change to this customer.

SAP Count

The number of SAPs specified for this service.

host-connectivity-verify

Syntax 
host-connectivity-verify
Context 
show>service>id
Description 

This command enables the context to display host connectivity check statistics.

statistics

Syntax 
statistics [summary] [sap sap-id]
Context 
show>service>id>host-connectivity-verify
Description 

This command displays host connectivity verification statistics.

Parameters 
sap-id
Specifies the SAP ID to show statistics for.
summary—
Displays host connectivity verify summary information.
Output 

The following output is an example of host connectivity verification statistics information, and Table 23 describes the output fields.

Sample Output
A:ALA-48>show>service>id# host-connectivity-verify statistics sap 1/1/9:0
==============================================================================
Host connectivity check statistics
==============================================================================
Svc   SapId/          DestIp          Last                   Time Oper
Id    SdpId           Address         Response               Expired State
------------------------------------------------------------------------------
1000  551/2/3:0       10.144.145.1    Up
==============================================================================
A:ALA-48>show>service>id#
Table 23:  Show Host Connectivity Verify Statistics Field Descriptions 

Label

Description  

Svc Id

The service identifier.

SapId/SdpId

The SAP and SDP identifiers.

DestIp Address

The destination IP address.

Last Response

The time when the last response was received.

Time Expired

Displays whether the interval value has expired.

Oper State

Displays the current operational state of the service.

summary

Syntax 
summary [sap sap-id]
Context 
show>service>id>host-connectivity-verify
Description 

This command displays a host connectivity verification summary.

Parameters 
sap-id
Specifies the SAP ID to show statistics for.

interface

Syntax 
interface [{[ip-address | ip-int-name] [interface-type] [detail] [family]} | summary]
Context 
show>service>id
Description 

This command displays information for the IP interfaces associated with the IES service. If no optional parameters are specified, a summary of all IP interfaces associated to the service are displayed.

Parameters 
ip-address—
The IP address of the interface for which to display information.
Values—

<ip-address>

ipv4-address

a.b.c.d (host bits must be 0)

ipv6-address

x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x - [0 to FFFF]H

d - [0 to 255]D

 

ip-int-name—
Specifies the IP interface name for which to display information. 32 characters maximum.
family—
Displays the router IP interface table to display.
Values—
ipv4 — Displays only those peers that have the IPv4 family enabled. ipv6 — Displays the peers that are IPv6-capable.

 

interface-type—
Specifies whether to display groups, interfaces, or redundant interfaces.
Values—
group, subscriber, redundant

 

detail—
Displays detailed IP interface information.
summary—
Displays IP interface information summary.
Output 

The following output is an example of IP interface information, and Table 24 describes the output fields.

Sample Output
A:ALA-49# show service id 88 interface
===============================================================================
Interface Table
===============================================================================
Interface-Name                   Adm         Opr(v4/v6)  Type    Port/SapId
   IP-Address                                                    PfxState
-------------------------------------------------------------------------------
Sector A                         Up          Down/Down   IES     1/1/1.2.2
   -                                                             -
test                             Up          Down/Down   IES     1/1/2:0
   10.1.1.1/31                                                   n/a
   10.1.1.1/31                                                   n/a
   10.1.2.1/31                                                   n/a
test27                           Up          Up/--       IES Sub subscriber
   192.168.10.21/24                                              n/a
grp-if                           Up          Down/--     IES Grp 1/2/2
Interfaces : 4
===============================================================================
A:ALA-49#
Table 24:  Show Service-ID Field Descriptions 

Label

Description  

If Name

The name used to refer to the IES interface.

Type

Specifies the interface type.

IP-Address

Specifies the IP address/IP subnet/broadcast address of the interface.

Adm

The administrative state of the interface.

Opr

The operational state of the interface.

Admin State

The administrative state of the interface.

Oper State

The operational state of the interface.

IP Addr/mask

Specifies the IP address/IP subnet/broadcast address of the interface.

If Index

The index corresponding to this IES interface. The primary index is 1; all IES interfaces are defined in the base virtual router context.

If Type

Specifies the interface type.

SAP Id

Specifies the SAP’s port ID.

SNTP B.Cast

Specifies whether SNTP broadcast client mode is enabled or disabled.

Arp Timeout

Specifies the timeout for an ARP entry learned on the interface.

MAC Address

Specifies the 48-bit IEEE 802.3 MAC address.

ICMP Mask Reply

Specifies whether ICMP mask reply is enabled or disabled.

Cflowd

Specifies whether Cflowd collection and analysis on the interface is enabled or disabled.

Redirects

Specifies the rate for ICMP redirect messages.

Unreachables

Specifies the rate for ICMP unreachable messages.

TTL Expired

Specifies the rate for ICMP TTL messages.

labels

Syntax 
labels
Context 
show>service>id
Description 

Displays the labels being used by the service.

Output 

The following output is an example of service ID labels information, and Table 25 describes the output fields.

Sample Output
*A:ALA-12# show service id 1 labels
============================================================================== 
Martini Service Labels                                                          
============================================================================== 
Svc Id     Sdp Id             Type I.Lbl        E.Lbl                           
------------------------------------------------------------------------------ 
1          10:1               Mesh 0            0                               
1          20:1               Mesh 0            0                               
1          30:1               Mesh 0            0                               
1          40:1               Mesh 130081       131061                          
1          60:1               Mesh 131019       131016                          
1          100:1              Mesh 0            0                               
------------------------------------------------------------------------------ 
Number of Bound SDPs : 6                                                       
------------------------------------------------------------------------------ 
*A:ALA-12#
Table 25:  Show Service-ID Labels Field Descriptions 

Label

Description  

Svc Id

The service identifier.

Sdp Id

The SDP identifier.

Type

Indicates whether the SDP is a spoke or a mesh.

I.Lbl

The VC label used by the far-end device to send packets to this device in this service by the SDP.

E.Lbl

The VC label used by this device to send packets to the far-end device in this service by the SDP.

sdp

Syntax 
sdp sdp-id pw-port [pw-port-id]
sdp sdp-id pw-port
sdp sdp-id pw-port [pw-port-id] [statistics]
sdp [consistent | inconsistent | na] egressifs
sdp sdp-id keep-alive-history
sdp far-end {ip-address | ipv6-address} keep-alive-history
sdp [sdp-id] [detail]
sdp far-end {ip-address | ipv6-address} [detail]
Context 
show>service
Description 

Displays information for the SDPs associated with the service.

If no optional parameters are specified, a summary of all associated SDPs is displayed.

Parameters 
sdp-id—
Specifies the SDP ID for which to display information.
Values—
1 to 17407

 

Default—
All SDPs.
pw-port-id
Specifies the pseudo-wire port identifier.
Values—
1 to 10239

 

statistics—
Displays SDP statistics information.
consistent—
Indicates that the network-domains for all the egress network interfaces that can carry traffic on this SDP are consistent.
inconsistent—
Indicates that the network-domain for one or more egress network interfaces that can carry traffic on this SDP are inconsistent.
na—
Indicates that there is no egress network interface that can carry traffic on this SDP.
egressifs—
Indicates whether all the egress network interfaces that can carry traffic on this SDP are associated with the network-domain configured on this SDP.
ip-address | ipv6-address
Displays only SDPs matching with the specified far-end IP address. 64 characters maximum.
Default—
SDPs with any far-end IP address.
keep-alive-history—
Displays the last fifty SDP keepalive events for the SDP.
Default—
SDP summary output.
detail—
Displays detailed SDP information.
Default—
SDP summary output.
Output 

The following output is an example of SDP information, and Table 17 describes the output fields.

Sample Output
*A:ALA-12>config>service# show service sdp 1 pw-port
===============================================================================
Service Destination Point (sdp Id 1 Pw-Port)
===============================================================================
Pw-port   VC-Id     Adm     Encap       Opr     VC Type     Egr       Monitor
                                                            Shaper    Oper
                                                            VPort     Group
-------------------------------------------------------------------------------
1         1         up      dot1q       up      ether
2         2         up      qinq        up      ether
3         3         up      dot1q       up      ether
4         4         up      qinq        up      ether
-------------------------------------------------------------------------------
Entries found : 4
===============================================================================
 
*A:ALA-12>config>service# show service sdp 1 pw-port 3
 
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port     : lag-1
VC-Id                : 3                     Admin Status       : up
Encap                : dot1q                 Oper Status        : up
VC Type              : ether
Oper Flags           : (Not Specified)
Monitor Oper-Group   : (Not Specified)
===============================================================================
 
*A:ALA-12>config>service# show service sdp 1 pw-port 3 statistics
 
===============================================================================
Service Destination Point (Sdp Id 1 Pw-Port 3)
===============================================================================
SDP Binding port     : lag-1
VC-Id                : 3                     Admin Status       : up
Encap                : dot1q                 Oper Status        : up
VC Type              : ether
Oper Flags           : (Not Specified)
Monitor Oper-Group   : (Not Specified)
 
Statistics            :
I. Fwd. Pkts.        : 0                     I. Dro. Pkts.      : 0
I. Fwd. Octs.        : 0                     I. Dro. Octs.      : 0
E. Fwd. Pkts.        : 0                     E. Fwd. Octets     : 0
===============================================================================
 
 
*A:Dut-B# show service sdp
 
============================================================================
Services: Service Destination Points
============================================================================
SdpId  AdmMTU  OprMTU  Far End          Adm  Opr         Del     LSP   Sig
----------------------------------------------------------------------------
230    0       1582    10.20.1.3        Up   Up          MPLS    I     TLDP
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
============================================================================
*A:Dut-B# 
 
*A:Dut-B# show service sdp detail  
 
===============================================================================
Services: Service Destination Points Details
===============================================================================
-------------------------------------------------------------------------------
 Sdp Id 230  -10.20.1.3
-------------------------------------------------------------------------------
Description           : (Not Specified)
SDP Id               : 230                   SDP Source         : manual
Admin Path MTU       : 0                     Oper Path MTU      : 1582
Delivery             : MPLS                  
Far End              : 10.20.1.3
Tunnel Far End       : n/a                   LSP Types          : SR-ISIS
 
Admin State          : Up                    Oper State         : Up
Signaling            : TLDP                  Metric             : 0
Acct. Pol            : None                  Collect Stats      : Disabled
Last Status Change   : 01/28/2015 22:00:07   Adv. MTU Over.     : No
Last Mgmt Change     : 01/28/2015 21:59:53   VLAN VC Etype      : 0x8100
Bw BookingFactor     : 100                   PBB Etype          : 0x88e7
Oper Max BW(Kbps)    : 0                     Avail BW(Kbps)     : 0
Net-Domain           : default               Egr Interfaces     : Consistent
Flags                : None
 
Mixed LSP Mode Information :
Mixed LSP Mode       : Disabled              Active LSP Type    : SR-ISIS
 
KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled
Hello Time           : 10                    Hello Msg Len      : 0
Hello Timeout        : 5                     Unmatched Replies  : 0
Max Drop Count       : 3                     Hold Down Time     : 10
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0
 
Src B-MAC LSB        : <none>                Ctrl PW VC ID      : <none>
Ctrl PW Active       : n/a                   
 
-------------------------------------------------------------------------------
RSVP/Static LSPs
-------------------------------------------------------------------------------
Associated LSP List :
No LSPs Associated
 
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding     : Disabled              EnforceDSTELspFc   : Disabled
Default LSP          : Uknwn                 Multicast LSP      : None
 
===============================================================================
FC Mapping Table
===============================================================================
FC Name             LSP Name
-------------------------------------------------------------------------------
No FC Mappings
 
-------------------------------------------------------------------------------
Segment Routing
-------------------------------------------------------------------------------
ISIS                 : enabled               LSP Id             : 524289
Oper Instance Id     : 0                     
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:Dut-B# 
 
 
*A:Dut-B>config>service>sdp# show service sdp       
 
============================================================================
Services: Service Destination Points
============================================================================
SdpId  AdmMTU  OprMTU  Far End          Adm  Opr         Del     LSP   Sig
----------------------------------------------------------------------------
230    0       1582    10.20.1.3        Up   Up          MPLS    O     TLDP
----------------------------------------------------------------------------
Number of SDPs : 1
----------------------------------------------------------------------------
Legend: R = RSVP, L = LDP, B = BGP, M = MPLS-TP, n/a = Not Applicable
        I = SR-ISIS, O = SR-OSPF
============================================================================
 
 
*A:ALA-12# show service sdp 2 detail
===============================================================================
Service Destination Point (Sdp Id : 2) Details
-------------------------------------------------------------------------------
 Sdp Id 2  -(10.10.10.104)
-------------------------------------------------------------------------------
Description           : GRE-10.10.10.104
SDP Id               : 2
Admin Path MTU       : 0                     Oper Path MTU      : 0
Far End              : 10.10.10.104          Delivery           : GRE
Admin State          : Up                    Oper State         : Down
Weighted ECMP        : Disabled              VLAN VC Etype      : 0x8100
Flags                : SignalingSessDown TransportTunnDown
Signaling            : TLDP                  Adv. MTU Over.     : No
Last Status Change   : 02/01/2007 09:11:39 
Last Mgmt Change     : 02/01/2007 09:11:46
 
KeepAlive Information :
Admin State          : Disabled              Oper State         : Disabled
Hello Time           : 10                    Hello Msg Len      : 0
Hello Timeout        : 5                     Unmatched Replies  : 0
Max Drop Count       : 3                     Hold Down Time     : 10
Tx Hello Msgs        : 0                     Rx Hello Msgs      : 0
 
Associated LSP LIST :
SDP Delivery Mechanism is not MPLS
===============================================================================
*A:ALA-12# 
Table 26:  Show Service SDP Field Descriptions 

Label

Description  

SDP Id

The SDP identifier.

Adm MTU

Specifies the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented.

Opr MTU

Specifies the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end router, without requiring the packet to be fragmented.

IP address

Specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP.

Adm

Admin State — Specifies the administrative state of the SDP.

Opr

Oper State — Specifies the operational state of the SDP.

Deliver

Specifies the type of delivery used by the SDP: GRE or MPLS.

Flags

Specifies the conditions that affect the operating status of this SDP.

Signal

Signaling

Specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received on the SDP.

Last Status Change

Specifies the time of the most recent operating status change to this SDP.

pw-port

Syntax 
pw-port [pw-port-id] [detail]
pw-port sdp sdp-id
pw-port sdp none
pw-port pw-port-id [statistics]
Context 
show>pw-port
Description 

Displays pseudo-wire port information.

If no optional parameters are specified, the command displays a summary of all defined PW ports. The optional parameters restrict output to only ports matching the specified properties.

Parameters 
pw-port-id
Specifies the pseudo-wire port identifier.
Values—
1 to 10239

 

detail—
Displays detailed port information that includes all the pw-port output fields.
sdp-id
The SDP ID for which to display matching PW port information.
Values—
1 to 17407

 

statistics—
Displays statistics information.
Output 

The following output is an example of PW port information, and Table 27 describes the output fields.

Sample Output
*A:ALA-48>config>service# show pw-port
============================================================================
PW Port Information
============================================================================
PW Port   Encap          SDP        IfIndex             VC-Id
----------------------------------------------------------------------------
1         dot1q          1          1526726657          1
2         qinq           1          1526726658          2
3         dot1q          1          1526726659          3
4         qinq           1          1526726660          4
============================================================================
 
*A:ALA-48>config>service# show pw-port 3
============================================================================
PW Port Information
============================================================================
PW Port   Encap          SDP        IfIndex             VC-Id
----------------------------------------------------------------------------
3         dot1q          1          1526726659          3
============================================================================
*A:ALA-48>config>service# show pw-port 3 detail
 
===============================================================================
PW Port Information
===============================================================================
PW Port            : 3
Encap              : dot1q
SDP                : 1
IfIndex            : 1526726659
VC-Id              : 3
Description        : 1-Gig Ethernet dual fiber
===============================================================================
*A:ALA-48>config>pw-port$ show pw-port sdp none
 
============================================================================
PW Port Information
============================================================================
PW Port   Encap          SDP        IfIndex             VC-Id
----------------------------------------------------------------------------
5         dot1q                     1526726661
============================================================================
 
 
*A:ALA-48>config>pw-port$ show pw-port sdp 1
 
============================================================================
PW Port Information
============================================================================
PW Port   Encap          SDP        IfIndex             VC-Id
----------------------------------------------------------------------------
1         dot1q          1          1526726657          1
2         qinq           1          1526726658          2
3         dot1q          1          1526726659          3
4         qinq           1          1526726660          4
============================================================================
 
Table 27:  Show PW-Port Field Descriptions 

Label

Description  

PW Port

The PW port identifier.

Encap

The encapsulation type of the PW port.

SDP

The SDP identifier.

IfIndex

The interface index used for the PW port.

VC-Id

The virtual circuit identifier.

Description

The description string for the PW port.

sap

Syntax 
sap sap-id
Context 
show>service>id
Description 

This command displays information for the SAPs associated with the service.

If no optional parameters are specified, a summary of all associated SAPs is displayed.

Parameters 
sap-id—
The ID that displays SAPs for the service in the slot/mda/port[.channel] format.
Output 

The following output is an example of SAP information, and Table 28 describes the output fields.

Sample Output
A:PE# show service id 500 sap 1/1/9:1 detail
 
===============================================================================
Service Access Points(SAP)
===============================================================================
Service Id         : 500
SAP                : 1/1/9:1                  Encap             : q-tag
Description        : (Not Specified)
Admin State        : Up                       Oper State        : Up
Flags              : None
Multi Svc Site     : None
Last Status Change : 08/31/2018 16:07:55
Last Mgmt Change   : 08/31/2018 16:07:55
Sub Type           : regular
Dot1Q Ethertype    : 0x8100                   QinQ Ethertype    : 0x8100
Split Horizon Group: (Not Specified)
 
Admin MTU          : 1518                     Oper MTU          : 1518
Ingr IP Fltr-Id    : n/a                      Egr IP Fltr-Id    : n/a
Ingr Mac Fltr-Id   : n/a                      Egr Mac Fltr-Id   : n/a
Ingr IPv6 Fltr-Id  : n/a                      Egr IPv6 Fltr-Id  : n/a
qinq-pbit-marking  : both
Egr Agg Rate Limit : max
Q Frame-Based Acct : Disabled                 Limit Unused BW   : Disabled
Qinq-vlan-                                    Qinq-vlan-
translation        : None                     translation Ids   : None
 
Acct. Pol          : None                     Collect Stats     : Disabled
 
Anti Spoofing      : None                     Dynamic Hosts     : Enabled
Avl Static Hosts   : 0                        Tot Static Hosts  : 0
Calling-Station-Id : n/a
 
Application Profile: None
Transit Policy     : None
AARP Id            : None
 
Oper Group         : (none)                   Monitor Oper Grp  : (none)
Host Lockout Plcy  : n/a
Lag Link Map Prof  : (none)
Bandwidth          : Not-Applicable
Oper DCpu Prot Pol*: _default-access-policy
 
-------------------------------------------------------------------------------
ETH-CFM SAP specifics
-------------------------------------------------------------------------------
Tunnel Faults      : n/a                      AIS               : Disabled
MC Prop-Hold-Timer : n/a
Squelch Levels     : None
Collect Lmm Stats  : Disabled
LMM FC Stats       : None
LMM FC In Prof     : None
 
-------------------------------------------------------------------------------
QOS
-------------------------------------------------------------------------------
Ingress qos-policy : 1                        Egress qos-policy : 1
Ingress FP QGrp    : (none)                   Egress Port QGrp  : (none)
Ing FP QGrp Inst   : (none)                   Egr Port QGrp Inst: (none)
Shared Q plcy      : n/a                      Multipoint shared : Disabled
I. Sched Pol       : (Not Specified)
E. Sched Pol       : (Not Specified)
I. Policer Ctl Pol : (Not Specified)
E. Policer Ctl Pol : (Not Specified)
E. HS Sec. Shaper  : (Not Specified)
I. QGrp Redir. List: (Not Specified)
E. QGrp Redir. List: (Not Specified)
-------------------------------------------------------------------------------
Sap Aggregate Stats
-------------------------------------------------------------------------------
                        Packets                 Octets
 
Ingress
Aggregate Offered     : 0                       0
Aggregate Forwarded   : 0                       0
Aggregate Dropped     : 0                       0
 
Egress
Aggregate Forwarded   : 0                       0
Aggregate Dropped     : 0                       0
-------------------------------------------------------------------------------
Sap Statistics
-------------------------------------------------------------------------------
Last Cleared Time     : 08/31/2018 16:19:29
 
                        Packets                 Octets
CPM Ingress           : 0                       0
 
Forwarding Engine Stats
Dropped               : 0                       0
Received Valid        : 0                       0
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Off. Uncolor          : 0                       0
Off. Managed          : 0                       0
 
Queueing Stats(Ingress QoS Policy 1)
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Queueing Stats(Egress QoS Policy 1)
Dro. In/InplusProf    : 0                       0
Dro. Out/ExcProf      : 0                       0
For. In/InplusProf    : 0                       0
For. Out/ExcProf      : 0                       0
-------------------------------------------------------------------------------
Sap per Queue stats
-------------------------------------------------------------------------------
                        Packets                 Octets
 
Ingress Queue 1 (Unicast) (Priority)
Off. HiPrio           : 0                       0
Off. LowPrio          : 0                       0
Dro. HiPrio           : 0                       0
Dro. LowPrio          : 0                       0
For. InProf           : 0                       0
For. OutProf          : 0                       0
 
Egress Queue 1
For. In/InplusProf    : 0                       0
For. Out/ExcProf      : 0                       0
Dro. In/InplusProf    : 0                       0
Dro. Out/ExcProf      : 0                       0
===============================================================================
* indicates that the corresponding row element may have been truncated.
A:PE#
Table 28:  Show Service-ID SAP Field Descriptions 

Label

Description  

Service Id

The service identifier.

SAP

The type of SAP.

Encap

The encapsulation type of the SAP.

Ethertype

Specifies an Ethernet type II Ethertype value.

Admin State

The administrative state of the SAP.

Oper State

The operational state of the SAP.

Flags

Specifies the conditions that affect the operating status of this SAP.

Display output includes: ServiceAdminDown, SapAdminDown, InterfaceAdminDown, PortOperDown, PortMTUTooSmall, L2OperDown, SapIngressQoSMismatch, SapEgressQoSMismatch, RelearnLimitExceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr, SapParamMismatch, CemSapNoEcidOrMacAddr, StandByForMcRing, ServiceMTUTooSmall, SapIngressNamedPoolMismatch, SapEgressNamedPoolMismatch, NoSapEpipeRingNode, SapIngQGrpRedirMismatch, SapEgrQGrpRedirMismatch

Last Status Change

Specifies the time of the most recent operating status change to this SAP.

Last Mgmt Change

Specifies the time of the most recent management-initiated change to this SAP.

Admin MTU

The desired largest service frame size (in octets) that can be transmitted through the SAP to the far-end router, without requiring the packet to be fragmented.

Ingress qos-policy

The ingress QoS policy ID assigned to the SAP.

Egress qos-policy

The egress QoS policy ID assigned to the SAP.

Ingress Filter-Id

The ingress filter policy ID assigned to the SAP.

Egress Filter-Id

The egress filter policy ID assigned to the SAP.

Acct. Pol

The accounting policy ID assigned to the SAP.

Collect Stats

Specifies whether statistics collection is enabled.

Dropped

The number of packets and octets dropped due to SAP state, ingress MAC or IP filter, same segment discard, bad checksum, and so on.

Received Valid

The number of valid packets and octets received on the SAP.

Off. HiPrio

The number of high-priority packets and octets, as determined by the SAP ingress QoS policy.

Off. LowPrio

The number of low-priority packets and octets, as determined by the SAP ingress QoS policy.

Off. Uncolor

The number of uncolored packets and octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.

Dro. HiPrio

The number of high-priority packets and octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to MBS exceeded, buffer pool limit exceeded, and so on.

Dro. LowPrio

The number of low-priority packets and octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to MBS exceeded, buffer pool limit exceeded, and so on.

For. InProf

The number of in-profile packets and octets (rate below CIR) forwarded by the ingress Qchip.

For. OutProf

The number of out-of-profile packets and octets (rate below CIR) forwarded by the ingress Qchip.

Dro. InProf

The number of in-profile packets and octets discarded by the egress Qchip due to MBS exceeded, buffer pool limit exceeded, and so on.

Ingress TD Profile

The profile ID applied to the ingress SAP.

Egress TD Profile

The profile ID applied to the egress SAP.

Alarm Cell Handling

The OAM operational status of the VCL.

AAL-5 Encap

The AAL-5 encapsulation type.

Mult Svc Site

Specifies the customer’s multiservice site name.

I. Sched Pol

The ingress scheduler policy applied to the customer’s multiservice site.

E. Sched Pol

The egress scheduler policy applied to the customer’s multiservice site.

sap

Syntax 
sap sap-id queue-depth [queue queue-id] [ingress | egress]
Context 
show>service>id
Description 

This command displays queue depth information for the specified SAP.

Parameters 
sap-id—
The ID that displays SAPs for the service in the slot/mda/port[.channel] format.
queue-id—
Specifies the queue ID.
Values—
1 to 32

 

ingress—
Displays information for the ingress policy.
egress—
Displays information for the egress policy.
Output 

The following output is an example of SAP queue depth information.

Sample Output
 
*A:PE-1# show service id 1 sap 1/2/1 queue-depth
===============================================================================
Queue Depth Information (Ingress SAP)
===============================================================================
No Matching Entries
===============================================================================
===============================================================================
Queue Depth Information (Egress SAP)
===============================================================================
-------------------------------------------------------------------------------
Name                      : 1->1/2/1->1
MBS                       : Def
-------------------------------------------------------------------------------
Queue Depths (percentage)
-------------------------------------------------------------------------------
0%-10% 11%-20% 21%-30% 31%-40% 41%-50% 51%-60% 61%-70% 71%-80% 81%-90% 91%-100%
-------------------------------------------------------------------------------
68.21  3.64    3.43    3.47    3.86    3.22    3.86    2.87    3.78    3.66
-------------------------------------------------------------------------------
Average Elapsed Time      : 0d 00:11:48
Wghtd Avg Polling Interval: 99 ms
-------------------------------------------------------------------------------
===============================================================================
*A:PE-1#
 
 

sap

Syntax 
sap sap-id queue-group-redirection [ingress | egress]
Context 
show>service>id
Description 

This command displays queue group redirect information for the specified SAP.

The output lists the queue group name and the instances configured in the related queue group redirect list. For each instance, the FP (for ingress) and port (for egress) is displayed. If there is a mismatch between the SAP and redirect list configuration and the queue group instance configuration, this is highlighted.

Parameters 
sap-id—
The ID that displays SAPs for the service in the slot/mda/port[.channel] format.
ingress—
Displays information for the ingress policy.
egress—
Displays information for the egress policy.
Output 

The following output is an example of SAP queue group redirection information.

Sample Output
*A:PE# show service id 1 sap 1/1/1 queue-group-redirection
===============================================================================
Queue Group Redirect List Information (Ingress SAP)
===============================================================================
Queue Group Redirect List    : list1
Type                         : vxlan-vni
Queue Group                  : qg1
 
-------------------------------------------------------------------------------
Match                    Instance                 FP
-------------------------------------------------------------------------------
1                        1                        1/1
2                        2                        1/1
3                        3                        1/1 : mismatch
-------------------------------------------------------------------------------
===============================================================================
 
===============================================================================
Queue Group Redirect List Information (Egress SAP)
===============================================================================
Queue Group Redirect List    : list1
Type                         : vxlan-vni
Queue Group                  : qg1
 
-------------------------------------------------------------------------------
Match                    Instance                 Port
-------------------------------------------------------------------------------
1                        1                        1/1/1
2                        2                        1/1/1
3                        3                        1/1/1 : mismatch
-------------------------------------------------------------------------------
===============================================================================
*A:PE#

sdp

Syntax 
sdp [sdp-id [:vc-id]] [detail]
sdp far-end {ip-address | ipv6-address} [detail]
sdp sdp-id [vc-id] l2tpv3
sdp sdp-id [:vc-id] static-isids [range-id range-id]
sdp sdp-id [:vc-id] static-isids mfib
sdp sdp-id [:vc-id] [detail] vccv-bfd [session]
sdp sdp-id [:vc-id] mrp
Context 
show>service>id
Description 

This command displays information for the SDPs associated with the service.

If no optional parameters are specified, a summary of all associated SDPs is displayed.

Parameters 
sdp-id [:vc-id]
Displays only information for the specified SDP ID.
Values—
sdp-id: 1 to 17407
vc-id: 1 to 4294967295

 

Default—
all SDPs
ip-address | ipv6-address
Displays only SDPs matching with the specified far-end IP address.
Default—
SDPs with any far-end IP address
detail—
Displays detailed SDP information.
l2tpv3—
Indicates that the user wants to display l2tpv3 specific information for SDPs that are of type l2tpv3.
static-isids—
Specifies the I-Component service IDs created on the SDP.
range-id—
Displays the service using the specified I-component Service ID (ISID)
Values—
1 to 4294967295

 

mfib—
Displays MFIB related information. This parameter applies to the 7450 ESS or7750 SR only.
vccv-bfd—
Displays detailed information about the VCCV BFD session for a spoke SDP.
session—
Displays a summary of all VCCV sessions.
mrp—
Displays detailed MRP information.
Output 

The following output is an example of SDP information.

Sample Output
A:Dut-A# show service id 1 sdp detail 
===============================================================================
Services: Service Destination Points Details 
===============================================================================
 Sdp Id 1:1  -(10.20.1.2)  
-------------------------------------------------------------------------------
Description     : Default sdp description
SDP Id             : 1:1                      Type              : Spoke        
VC Type            : Ether                    VC Tag            : n/a          
Admin Path MTU     : 0                        Oper Path MTU     : 9186         
Far End            : 10.20.1.2                Delivery          : MPLS         
 
Admin State        : Up                       Oper State        : Up           
Acct. Pol          : None                     Collect Stats     : Disabled     
Ingress Label      : 2048                     Egress Label      : 2048         
Ing mac Fltr       : n/a                      Egr mac Fltr      : n/a          
Ing ip Fltr        : n/a                      Egr ip Fltr       : n/a          
Ing ipv6 Fltr      : n/a                      Egr ipv6 Fltr     : n/a          
Admin ControlWord  : Not Preferred            Oper ControlWord  : False        
Last Status Change : 05/31/2007 00:45:43      Signaling         : None         
Last Mgmt Change   : 05/31/2007 00:45:43                                       
Class Fwding State : Up                                                        
Flags              : None
Peer Pw Bits       : None
Peer Fault Ip      : None                                                      
Peer Vccv CV Bits  : None
Peer Vccv CC Bits  : None
Max Nbr of MAC Addr: No Limit                 Total MAC Addr    : 0            
Learned MAC Addr   : 0                        Static MAC Addr   : 0            
 
MAC Learning       : Enabled                  Discard Unkwn Srce: Disabled     
MAC Aging          : Enabled                                                   
L2PT Termination   : Disabled                 BPDU Translation  : Disabled     
MAC Pinning        : Disabled                                                  
 
KeepAlive Information :
Admin State        : Disabled                 Oper State        : Disabled     
Hello Time         : 10                       Hello Msg Len     : 0            
Max Drop Count     : 3                        Hold Down Time    : 10           
 
Statistics            :
I. Fwd. Pkts.      : 0                        I. Dro. Pkts.     : 0            
I. Fwd. Octs.      : 0                        I. Dro. Octs.     : 0            
E. Fwd. Pkts.      : 0                        E. Fwd. Octets    : 0            
MCAC Policy Name   :                                                           
MCAC Max Unconst BW: no limit                 MCAC Max Mand BW  : no limit     
MCAC In use Mand BW: 0                        MCAC Avail Mand BW: unlimited    
MCAC In use Opnl BW: 0                        MCAC Avail Opnl BW: unlimited    
 
Associated LSP LIST :
Lsp Name           : A_B_1                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m35s                                                 
 
Lsp Name           : A_B_2                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m35s                                                 
 
Lsp Name           : A_B_3                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_4                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_5                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_6                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_7                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_8                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m35s                                                 
 
Lsp Name           : A_B_9                                                     
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s                                                 
 
Lsp Name           : A_B_10                                                    
Admin State        : Up                       Oper State        : Up           
Time Since Last Tr*: 00h26m34s 
-------------------------------------------------------------------------------
Class-based forwarding :
-------------------------------------------------------------------------------
Class forwarding   : enabled                                                   
Default LSP        : A_B_10                   Multicast LSP     : A_B_9 
===============================================================================
FC Mapping Table
===============================================================================
FC Name             LSP Name                                                   
-------------------------------------------------------------------------------
af                  A_B_3                                                      
be                  A_B_1                                                      
ef                  A_B_6                                                      
h1                  A_B_7                                                      
h2                  A_B_5                                                      
l1                  A_B_4                                                      
l2                  A_B_2                                                      
nc                  A_B_8                                                      
===============================================================================
Stp Service Destination Point specifics
-------------------------------------------------------------------------------
Mac Move           : Blockable                                                 
Stp Admin State    : Up                       Stp Oper State    : Down         
Core Connectivity  : Down                                                      
Port Role          : N/A                      Port State        : Forwarding   
Port Number        : 2049                     Port Priority     : 128          
Port Path Cost     : 10                       Auto Edge         : Enabled      
Admin Edge         : Disabled                 Oper Edge         : N/A          
Link Type          : Pt-pt                    BPDU Encap        : Dot1d        
Root Guard         : Disabled                 Active Protocol   : N/A          
Last BPDU from     : N/A                                                       
Designated Bridge  : N/A                      Designated Port Id: 0            
 
Fwd Transitions    : 0                        Bad BPDUs rcvd    : 0            
Cfg BPDUs rcvd     : 0                        Cfg BPDUs tx      : 0            
TCN BPDUs rcvd     : 0                        TCN BPDUs tx      : 0            
RST BPDUs rcvd     : 0                        RST BPDUs tx      : 0            
-------------------------------------------------------------------------------
Number of SDPs : 1
-------------------------------------------------------------------------------
* indicates that the corresponding row element may have been truncated.
-------------------------------------------------------------------------------
A:Dut-A# 

subscriber-hosts

Syntax 
subscriber-hosts [sap sap-id] [ip ip-prefix/prefix-length] [mac ieee-address] [sub-profile sub-profile-name] [sla-profile sla-profile-name] [app-profile app-profile-name] [wholesaler service-id] [address-origin address-origin] [detail]
Context 
show>service>id
Description 

This command displays subscriber host information.

Parameters 
sap-id—
Displays the specified subscriber host SAP information.
ip-prefix/prefix-length—
The destination address of the aggregate route in dotted decimal notation.
Values—
ipv4-prefix: a.b.c.d (host bits must be 0)
ipv4-prefix-length: 0 to 32
ipv6-prefix:
  1. x:x:x:x:x:x:x:x (eight 16-bit pieces)
  2. x:x:x:x:x:x:d.d.d.d
  3. x: [0 to FFFF] H
  4. d: [0 to 255] D
ipv6-prefix-length: 0 to 128

 

ieee-address—
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
Values—
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx (cannot be all zeros)

 

sub-profile-name
Specifies an existing subscriber profile name to be associated with the static subscriber host. The subscriber profile is configured in the config>subscr-mgmt>sub-profile context. 32 characters maximum.
sla-profile-name
Specifies an existing SLA profile name to be associated with the static subscriber host. The SLA profile is configured in the config>subscr-mgmt>sla-profile context. 32 characters maximum.
app-profile-name
Specifies an existing application profile name to be associated with the static subscriber host. The application profile is configured in the config>subscr-mgmt>sla-profile context. 32 characters maximum.
service-id
The VPRN service ID of the wholesaler (applies only to the 7750 SR).
Values—
1 to 2147483648

 

address-origin—
Shows the origin of the IP address assigned to the subscriber-host.
Values—
aaa, dynamic, static, bonding

 

detail—
Displays detailed information.

statistics

Syntax 
statistics [ip-int-name | ip-address]
Context 
show>router>dhcp
Description 

Display statistics for DHCP relay and DHCP snooping. If no IP address or interface name is specified, then all configured interfaces are displayed. If an IP address or interface name is specified, then only data regarding the specified interface is displayed.

Parameters 
ip-int-name | ip-address—
Displays statistics for the specified IP interface.
Output 

The following output is an example of DHCP statistics information, and Table 29 describes the output fields.

Sample Output
*A:ALA-1# show router dhcp statistics
================================================================
DHCP Global Statistics
================================================================
Rx Packets                        : 0
Tx Packets                        : 0
Rx Malformed Packets              : 0
Rx Untrusted Packets              : 0
Client Packets Discarded          : 0
Client Packets Relayed            : 0
Client Packets Snooped            : 0
Server Packets Discarded          : 0
Server Packets Relayed            : 0
Server Packets Snooped            : 0
================================================================
*A:ALA-1#
Table 29:  Show DHCP Statistics Field Descriptions 

Label

Description  

Received Packets

The number of packets received from the DHCP clients.

Transmitted Packets

The number of packets transmitted to the DHCP clients.

Received Malformed Packets

The number of malformed packets received from the DHCP clients.

Received Untrusted Packets

The number of untrusted packets received from the DHCP clients.

Client Packets Discarded

The number of packets received from the DHCP clients that were discarded.

Client Packets Relayed

The number of packets received from the DHCP clients that were forwarded.

Client Packets Snooped

The number of packets received from the DHCP clients that were snooped.

Server Packets Discarded

The number of packets received from the DHCP server that were discarded.

Server Packets Relayed

The number of packets received from the DHCP server that were forwarded.

Server Packets Snooped

The number of packets received from the DHCP server that were snooped.

summary

Syntax 
summary
Context 
show>router>dhcp
Description 

This command displays the status of the DHCP relay and DHCP snooping functions on each interface.

Output 

The following output is an example of DHCP summary information, and Table 30 describes the output fields.

Sample Output

The following sample output applies to the 7750 SR:

A:ALA-49# show router dhcp summary
===============================================================================
DHCP Summary (Router: Base)
===============================================================================
Interface Name                   Arp      Used/                 Info    Admin
  SapId/Sdp                      Populate Provided              Option  State
-------------------------------------------------------------------------------
Sector A                         No       0/0                   Keep    Up
  sap:7/1/1.2.2                           0/0
grp-if                           No       0/1                   Keep    Down
ies-test                         No       0/0                   Keep    Up
  sap:9/1/2:0/500                         0/0
test                             No       0/0                   Keep    Up
  sap:10/1/2:0                            0/0
test1                            No       0/0                   Keep    Up
  sap:7/1/1.1.2                           0/0
test2                            No       0/0                   Keep    Up
  sap:7/1/1.2.1                           0/0
testA                            No       0/0                   Keep    Up
  sap:7/1/3.1.1                           0/0
testB                            No       0/0                   Keep    Up
  sap:7/1/5.1.1                           0/0
to-HQ                            No       0/0                   Keep    Up
  sdp:spoke-2:1001                        0/0
to-web                           No       0/0                   Keep    Up
  sap:2/1/10:50                           0/0
-------------------------------------------------------------------------------
Interfaces: 9
Sample Output

The following sample output applies to the 7450 ESS:

A:ALA-49# show router dhcp summary
===============================================================================
DHCP Summary (Router: Base)
===============================================================================
Interface Name                   Arp      Used/                 Info    Admin
  SapId/Sdp                      Populate Provided              Option  State
-------------------------------------------------------------------------------
Sector A                         No       0/0                   Keep    Up
  sap:7/1/1.2.2                           0/0
ies-test                         No       0/0                   Keep    Up
  sap:9/1/2:0/500                         0/0
test                             No       0/0                   Keep    Up
  sap:10/1/2:0                            0/0
test1                            No       0/0                   Keep    Up
  sap:7/1/1.1.2                           0/0
test2                            No       0/0                   Keep    Up
  sap:7/1/1.2.1                           0/0
testA                            No       0/0                   Keep    Up
  sap:7/1/3.1.1                           0/0
to-HQ                            No       0/0                   Keep    Up
  sdp:spoke-2:1001                        0/0
to-web                           No       0/0                   Keep    Up
sap:2/1/10:50                           0/0 
-------------------------------------------------------------------------------
Interfaces: 9
Table 30:  Show DHCP Summary Field Descriptions 

Label

Description  

Interface Name

Name of the router interface.

SapId/Sdp

Specifies the associated SAP ID or SDP ID.

Arp Populate

Specifies whether or not ARP populate is enabled.

Used/Provided

Used — The number of lease-states currently in use on a specific interface (the number of clients on that interface got an IP address by DHCP). This value is always less than or equal to the ‘Provided’ field.

Provided — The configured for a specific interface.

Info Option

Indicates whether Option 82 processing is enabled on the interface.

Admin State

Indicates the administrative state.

vrrp

Syntax 
vrrp
Context 
show>router
Description 

This command displays information VRRP instances.

instance

Syntax 
instance
instance interface interface-name [vrid virtual-router-id]
instance interface interface-name vrid virtual-router-id ipv6
Context 
show>router>vrrp
Description 

This command displays statistics for the VRRP instance.

Parameters 
interface-name—
Displays statistics for the specified interface, up to 32 characters maximum.
virtual-router-id—
Displays statistics for the specified virtual router ID.
Values—
1 to 255

 

ipv6—
Displays statistics peers for IPv6 instances.

statistics

Syntax 
statistics
Context 
show>router>vrrp
Description 

This command displays statistics for the VRRP instance.

retailers

Syntax 
retailers
Context 
show>service>id
Description 

This command displays the service ID of the retailer subscriber service to which this DHCP lease belongs.

wholesalers

Syntax 
wholesalers
Context 
show>service>id
Description 

This command displays service wholesaler information.

2.6.2.2. IES Clear Commands

dhcp

Syntax 
dhcp
Context 
clear>router>dhcp
clear>service>id
Description 

This command enables the context to clear DHCP parameters.

dhcp6

Syntax 
dhcp6
Context 
clear>router>dhcp6
clear>service>id
Description 

This command enables the context to clear DHCPv6 parameters and only applies to the 7750 SR.

statistics

Syntax 
statistics [ip-int-name | ip-address]
Context 
clear>router>dhcp
Description 

Clears DHCP statistics.

id

Syntax 
id service-id
Context 
clear>service
clear>service>statistics
Description 

This command clears parameters for a specific service.

Parameters 
service-id—
The ID that uniquely identifies the service to clear.
Values—
1 to 2148278316, svc-name: 64 characters max

 

arp-host

Syntax 
arp-host {all | mac ieee-address | sap sap-id | ip-address ip-address[/mask]}
arp-host {port port-id | {inter-dest-id intermediate-destination-id | no-inter-dest-id} [port port-id]}
arp-host statistics [sap sap-id | interface interface-name]
Context 
clear>service>id
Description 

This command clears ARP host data.

Parameters 
ieee-address—
Clears the ARP host MAC address information. The 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
sap-id—
Clears the specified SAP information.
ip-address[/mask]—
Clears the specified IP address and mask.
Values—
a.b.c.d.
mask: 1 to 32

 

port-id—
Clear the specified port ID information.
intermediate-destination-id—
Displays information about the specified intermediate destination ID. 32 characters maximum.
no-inter-dest-id—
Displays the information about no intermediate destination ID.
interface-name—
Clears the interface name. 32 characters maximum.

ip

Syntax 
[no] ip ip-address
Context 
debug>service>id>arp-host
Description 

This command displays ARP host events for a particular IP address.

Parameters 
ip-address—
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
Values—
a.b.c.d

 

mac

Syntax 
[no] mac ieee-address
Context 
debug>service>id>arp-host
Description 

This command displays ARP host events for a particular MAC address.

Parameters 
mac-address —
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
Values—
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx (cannot be all zeros)

 

mode

Syntax 
mode {all | dropped-only}
no mode
Context 
debug>service>id>arp-host
Description 

This command configures the ARP host tracing mode.

Parameters 
all—
Debugs all dropped packets.
dropped-only—
Only displays dropped packets.

sap

Syntax 
[no] sap sap-id
Context 
debug>service>id>host-connectivity-verify
Description 

This command displays ARP host events for a particular SAP.

Parameters 
sap-id—
Specifies the physical port identifier portion of the SAP definition.

interface

Syntax 
interface [ip-int-name | ip-addr] [icmp] [urpf-stats] [statistics]
Context 
clear>router
Description 

This command clears IP interface statistics.

If no IP interface is specified either by IP interface name or IP address, the command will perform the clear operation on all IP interfaces.

Parameters 
ip-int-name | ip-addr—
The IP interface name or IP interface address.
Default—
all IP interfaces
icmp—
Specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limit.
urpf-stats—
Resets the statistics associated with uRPF failures.
statistics—
Resets the IP interface traffic statistics.

interface

Syntax 
interface interface-name [vrid virtual-router-id]
interface interface-name vrid virtual-router-id ipv6
Context 
clear>router>vrrp
Description 

This command clears and resets VRRP instances.

Parameters 
interface-name—
Specifies an existing interface name up to 32 characters in length.
virtual-router-id—
Specifies the virtual router identifier.
Values—
1 to 255

 

ipv6—
Clears IPv6 VRRP interface information.

statistics

Syntax 
statistics interface interface-name [vrid virtual-router-id]
statistics
statistics interface interface-name vrid virtual-router-id ipv6
Context 
clear>router>vrrp
Description 

This command clears statistics for VRRP instances.

Parameters 
interface-name—
Specifies an existing interface name up to 32 characters in length.
virtual-router-id—
Specifies the virtual router identifier.
Values—
1 to 255

 

fdb

Syntax 
fdb {all | mac ieee-address | sap sap-id] | mesh-sdp sdp-id[:vc-id] | spoke-sdp sdp-id:vc-id}
Context 
clear>service>id
Description 

This command clears FDB entries for the service.

Parameters 
all—
Clears all FDB entries.
ieee-address
Clears only FDB entries in the FDB table with the specified 48-bit MAC address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
sap-id—
Clears the specified SAP information.
mesh-sdp—
Clears only service FDB entries associated with the specified mesh SDP ID. For a mesh SDP, the VC ID is optional.
spoke-sdp—
Clears only service FDB entries associated with the specified spoke SDP ID. For a spoke SDP, the VC ID must be specified.
sdp-id—
The SDP ID for which to clear associated FDB entries.
Values—
1 to 17407

 

vc-id—
The virtual circuit ID on the SDP ID for which to clear associated FDB entries.
Values—
1 to 4294967295

 

Default—
For mesh SDPs only, all VC IDs.

site

Syntax 
site name
Context 
clear>service>id
Description 

This command clears site-specific information for the service.

Parameters 
name—
Clears information about the specified service name. 32 characters maximum.
Values—
1 to 2147483648

 

spoke-sdp

Syntax 
spoke-sdp sdp-id:vc-id ingress-vc-label
Context 
clear>service>id
Description 

Clears and resets the spoke SDP bindings for the service.

Parameters 
sdp-id—
The spoke SDP ID to be reset.
Values—
1 to 17407

 

vc-id—
The virtual circuit ID on the SDP ID to be reset.
Values—
1 to 4294967295

 

stp

Syntax 
stp
Context 
clear>service>statistics>id
Description 

Clears all spanning tree statistics for the service ID.

lease-state

Syntax 
lease-state ip-address ip-address[/mask] [no-dhcp-release]
lease-state mac ieee-address [no-dhcp-release]
lease-state mac sap sap-id [no-dhcp-release]
sdp sdp-id:vc-id [no-dhcp-release]
 
Context 
clear>service>id>dhcp
Description 

Clears DHCP lease state information for this service.

Parameters 
ip-address [/mask]—
Displays the specified destination IP address and mask.
Values—
a.b.c.d
mask: 1 to 32

 

ieee-address —
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
Values—
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx

 

sap-id—
Clears the specified lease state SAP information.
sdp-id:vc-id—
The specified SDP to be cleared.
Values—
sdp-id: 1 to 17407
vc-id: 1 to 4294967295

 

no-dhcp-release—
Specifies that the node will clear the state without sending theDHCP release message.

lease-state

Syntax 
lease-state all [no-dhcp-release]
lease-state ipv6-address ipv6-prefix [/prefix-length] [no-dhcp-release]
lease-state mac ieee-address [no-dhcp-release]
lease-state sap sap-id [no-dhcp-release]
Context 
clear>service>id>dhcp6
Description 

This command clears DHCPv6 lease state information for this service.

Parameters 
all—
Clears all statistics.
no-dhcp-release—
Specifies that the node will clear the state without sending theDHCP release message.
ipv6-prefix/prefix-length—
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
Values—

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x - [0 to FFFF]H

d - [0 to 255]D

 

ieee-address —
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
Values—
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx

 

statistics

Syntax 
statistics [ip-int-name | ipv6-address]
Context 
clear>router>dhcp6
Description 

This command clears DHCP6 statistics.

Parameters 
ip-int-name—
Specifies the IP interface name up to 32 characters in length.
ip-address ipv6-address/prefix-length—
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
Values—

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)

x:x:x:x:x:x:d.d.d.d

x - [0 to FFFF]H

d - [0 to 255]D

 

statistics

Syntax 
statistics [sap sap-id | sdp sdp-id:vc-id | interface ip-address | ip-int-name]
Context 
clear>service>id>dhcp
Description 

This command clears DHCP statistics.

Parameters 
sap-id—
Clears the specified SAP information.
sdp-id—
The specified SDP to be cleared.
Values—
1 to 17407

 

vc-id—
The virtual circuit ID on the SDP ID to be cleared.
Values—
1 to 4294967295

 

ip-address
The interface IP address.
Values—
a.b.c.d

 

ip-int-name—
The interface name. 32 characters maximum.

2.6.2.3. IES Debug Commands

host-connectivity-verify

Syntax 
[no] host-connectivity-verify
Context 
debug>service>id
Description 

This command enables Subscriber Host Connectivity Verification (SHCV) debugging.

The no form of the command disables the SHCV debugging.

ip

Syntax 
[no] ip ip-address
Context 
debug>service>id>host-connectivity-verify
Description 

This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular IP address.

Parameters 
ip-address—
The IP address of the IP interface. The ip-address portion of the address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).

mac

Syntax 
[no] mac ieee-address
Context 
debug>service>id>host-connectivity-verify
Description 

This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular MAC address.

Parameters 
ieee-address —
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.

sap

Syntax 
[no] sap sap-id
Context 
debug>service>id>host-connectivity-verify
Description 

This command displays Subscriber Host Connectivity Verification (SHCV) events for a particular SAP.

Parameters 
sap-id—
Specifies the physical port identifier portion of the SAP definition.

packets

Syntax 
[no] packets
[no] packets interface ip-int-name [vrid virtual-router-id]
[no] packets interface ip-int-name vrid virtual-router-id ipv6
Context 
debug>router>vrrp
Description 

This command enables or disables debugging for VRRP packets.

Parameters 
ip-int-name—
Specifies the interface name. 32 characters maximum.
virtual-router-id—
Specifies the router ID.
Values—
1 to 255

 

ipv6—
Displays IPv6 information.

events

Syntax 
[no] events
[no] events interface ip-int-name [vrid virtual-router-id]
[no] events interface ip-int-name vrid virtual-router-id ipv6
Context 
debug>router>vrrp
Description 

This command enables or disables debugging for VRRP events.

Parameters 
ip-int-name—
Specifies the interface name.
virtual-router-id—
Specifies the router ID.
Values—
1 to 255

 

ipv6—
Displays IPv6 information.

2.6.2.4. IES Monitor Commands

instance

Syntax 
instance interface interface-name vr-id virtual-router-id [ipv6] [interval seconds] [repeat repeat] [absolute | rate]
Context 
monitor>router>vrrp
Description 

This command enables monitoring for statistics for VRRP instances.

Parameters 
interface-name—
The name of the existing IP interface on which VRRP is configured. 32 characters maximum.
virtual-router-id—
The virtual router ID for the existing IP interface, expressed as adecimal integer.
Values—
1 to 255

 

ipv6—
Displays IPv6 information.
seconds—
Configures the interval for each display in seconds.
Values—
3 to 60

 

Default—
10
repeat—
Configures how many times the command is repeated.
Values—
1 to 999

 

Default—
10
absolute—
Raw statistics are displayed, without processing. No calculations areperformed on the delta or rate statistics.
rate—
Rate-per-second for each statistic is displayed instead of the delta.