4.9. MPLS Forwarding Policy Show Command Reference

4.9.1. Command Hierarchies

Show Commands
Clear Commands
Monitor Commands

4.9.1.1. Show Commands

show

— router

— mpls

— forwarding-policies

— binding-label [label] [detail]

— binding-label [label] egress-stats

— binding-label [label] ingress-stats

— endpoint [{ip-address | ipv6-address}] [detail]

— endpoint [{ip-address | ipv6-address}] egress-stats

— forwarding-policy [policy] [detail]

— status

4.9.1.2. Clear Commands

clear

— router

— mpls

— forwarding-policies

— forwarding-policy name egress-stats

4.9.1.3. Monitor Commands

monitor

— router

— mpls

— forwarding-policies

— forwarding-policy plcy egress-stats [interval seconds] [repeat repeat] [{absolute | rate}]

4.9.2.1. Show Commands

Note:

The command outputs in this chapter are examples only; actual displays may differ depending on supported functionality and user configuration.

binding-label

Syntax

binding-label [label] [detail]

binding-label [label] egress-stats

binding-label [label] ingress-stats

Context

show>router>mpls>forwarding-policies

Description

This command displays the MPLS forwarding policy binding label information.

Parameters

label—

Specifies the label value.

Values—

32 to 1048575

detail—

Displays detailed information of the binding label.

egress-stats—

Displays the egress statistics, if any, of all the instances of the specified forwarding policy.

ingress-stats—

Displays ingress statistics information.

Output

Table 49 describes MPLS binding label output fields.

Table 49: MPLS Binding Label Output Fields

Label	Description
Label	Specifies the label number.
Preference	Specifies the preference.
Oper State	Specifies the operational state (up \| down).
Policy Name	Specifies the MPLS forwarding policies binding label name.
No. of Binding Labels	Specifies the number of binding labels.
OperDown Reason	Specifies the reason for being operationally down.
Down Time	Specifies the downtime date and time.
NumNextHopGrps	Specifies the number of next-hop groups.
Ingress Stats	Specifies if ingress stats are enabled for collection (disabled \| enabled).
IngOperState	Specifies the ingress operational state (up \| down)
Revert Timer	Specifies the revert timer value.
Retry Count	Specifies the retry count.
Next Retry In	Specifies the next retry value.
Next-hop Group	Specifies the next-hop group.
Resolution Type	Specifies the resolution type (direct \| indirect).
Num Revert	Specifies the number of reverts.
Num Failover	Specifies the number of failovers.
Next Revert In	Specifies the next revert interval.
Primary nexthop	Specifies the IP address of the primary next-hop.
Resolved	Specifies the resolved status (false \| true).
NHopDownReason	Specifies the reason for the next-hop down.
Backup nexthop	Specifies the IP address of the backup next-hop.
StatsOperState	Specifies if a statistic index is allocated to the next-hop.
EgrStatsState	Specifies if all next-hops have a statistic index allocated.

Sample Output

===============================================================================

*A:Dut-C> show router mpls forwarding-policies binding-label

- binding-label [<label>] [detail]

*A:Dut-C> show router mpls forwarding-policies binding-label

===============================================================================

Binding Label

===============================================================================

Label Preference Oper State

Policy Name

-------------------------------------------------------------------------------

33 253 Down

indirect1

-------------------------------------------------------------------------------

No. of Binding Labels: 1

===============================================================================

*A:Dut-C> show router mpls forwarding-policies binding-label detail

===============================================================================

Binding Label (Detail)

===============================================================================

Label : 33 Preference : 253

Policy Name : indirect1

Oper State : Down OperDownReason : notApplicable

Down Time : 09/28/2018 19:53:33 NumNextHopGrps : 1

Ingress Stats : Disabled IngrOperState : Down

Revert Timer : 600

Retry Count : 0 Next Retry In : 0

Next-hop Group : 1 Resolution Type: indirect

Oper State : Down OperDownReason : notApplicable

Num Revert : 0 Num Failover : 0

Next Revert In : 0

Primary nexthop: 4.4.4.4

Resolved : False NHopDownReason : notApplicable

Backup nexthop : 3.3.3.3

Resolved : False NHopDownReason : notApplicable

-------------------------------------------------------------------------------

show router mpls forwarding-policies binding-label 400001 egress-stats

===============================================================================

Binding Label (Detail)

===============================================================================

Label : 400001 Preference : 255

Policy Name : cc Oper State : Up

EgrStatsState : Up

Next-hop Group : 1

Primary nexthop : 10.10.5.5

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Backup nexthop : 10.10.11.4

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Next-hop Group : 2

Primary nexthop : 10.10.5.5

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Backup nexthop : 10.10.11.4

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Total Aggr :

Aggr Pkts: 44000 Aggr Octets: 46200000

-------------------------------------------------------------------------------

===============================================================================

endpoint

Syntax

endpoint [{ip-address | ipv6-address}] [detail]

endpoint [{ip-address | ipv6-address}] egress-stats

Context

show>router>mpls>forwarding-policies

Description

This command displays the MPLS forwarding policy endpoint information.

Parameters

ip-address—

Specifies the IPv4 address of the endpoint up to 64 characters.

ipv6-address—

Specifies the IPv6 address of the endpoint up to 64 characters.

detail—

Specifies detailed information for the endpoint.

egress-stats—

Displays the egress statistics, if any, of all the instances of the specified forwarding policy.

Output

Table 50 describes MPLS endpoint output fields.

Table 50: MPLS Endpoint Output Fields

Label	Description
Endpoint	Specifies the endpoint IP address.
Preference	Specifies the preference.
Policy Name	Specifies the MPLS forwarding policies binding label name.
Active	Specifies the active state (Y \| N).
InactiveReason	Specifies the inactive reason.
Last Updated	Specifies the date and time of the last update.
Num Grps	Specifies the number of groups.
OperState	Specifies the operational state (up \| down).
Metric	Specifies the metric value.
TTM Preference	Specifies the TTM preference value.
Revert Timer	Specifies the revert timer value.
Path Pref	Specifies the path preference.
Retry Count	Specifies the retry count.
Next Retry In	Specifies the next retry value.
Next-hop Group	Specifies the next-hop group.
Resolution Type	Specifies the resolution type (direct \| indirect).
Oper State	Specifies the operational state (down \| up).
Oper Down Reas*	Specifies the reason for being operationally down.
Num Revert	Specifies the number of reverts.
Num Failover	Specifies the number of failovers.
Next Revert In	Specifies the next revert interval.
Weight	Specifies the weight value.
Primary	Specifies the IP address of the primary next-hop.
Resolved	Specifies the resolved status (false \| true).
Down Reason	Specifies the down reason.
Backup	Specifies the IP address of the backup next-hop.
StatsOperState	Specifies if a statistic index is allocated to the next-hop.
EgrStatsState	Specifies if all next-hops have a statistic index allocated.

Sample Output

A:Dut-C# show router mpls forwarding-policies endpoint detail

===============================================================================

Endpoint (Detail)

===============================================================================

Endpoint : 10.20.1.2 Preference : 255

Policy Name : one

Active : N InactiveReason : Not Applicable

Last Updated : 09/27/2018 22:51:26 Num Grps : 2

Metric : 0 TTM Preference : 255

Revert Timer : 0 Path Pref : 255

Retry Count : 0 Next Retry In : 0

Nexthop Group : 1 Resolution Type: direct

Oper State : Down OperDownReason : Not Applicable

Num Revert : 0 Num Failover : 0

Next Revert In : 0 Weight : 0

Primary : 10.10.3.2

Resolved : False Down Reason : Not Applicable

Backup : 10.10.12.2

Resolved : False Down Reason : Not Applicable

Nexthop Group : 2 Resolution Type: direct

Oper State : Down OperDownReason : Not Applicable

Num Revert : 0 Num Failover : 0

Next Revert In : 0 Weight : 45

Primary : 10.10.3.3

Resolved : False Down Reason : Not Applicable

Backup : 10.10.4.4

Resolved : False Down Reason : Not Applicable

-------------------------------------------------------------------------------

*A:Dut-B# show router mpls forwarding-policies endpoint

===============================================================================

Endpoint Table

===============================================================================

Endpoint Preference Active

-------------------------------------------------------------------------------

10.20.1.5 2 Y

-------------------------------------------------------------------------------

No. of Tunnels: 1

show router mpls forwarding-policies endpoint 10.20.1.5 egress-stats

===============================================================================

Endpoint (Detail)

===============================================================================

Endpoint : 10.20.1.5 Preference : 255

Policy Name : cc Oper State : Up

EgrStatsState : Up

Next-hop Group : 1

Primary nexthop : 10.10.5.5

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Backup nexthop : 10.10.11.4

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Next-hop Group : 2

Primary nexthop : 10.10.5.5

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Backup nexthop : 10.10.11.4

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Total Aggr :

Aggr Pkts: 44000 Aggr Octets: 46200000

-------------------------------------------------------------------------------

===============================================================================

forwarding-policy

Syntax

forwarding-policy [policy] [detail]

Context

show>router>mpls>forwarding-policies

Description

This command displays the MPLS forwarding policy information.

Parameters

policy—

Specifies the policy name.

detail—

Specifies detailed information.

Output

Table 51 describes MPLS forward-policy output fields.

Table 51: MPLS Forward-policy Output Fields

Label	Description
Policy Name	Specifies the MPLS forwarding policy name.
Binding Label	Specifies the binding label number.
Admin	Specifies the administrative state (up \| down).
OperState	Specifies the operational state (up \| down).
No. of Forwarding Policies	Specifies the number of forwarding policies.
Type	Specifies the type.
Binding Label	Specifies the binding label number.
Last Change	Specifies the date and time of the last change.

Sample Output

A*A:Dut-B>config>router>mpls# /show router mpls forwarding-policies forwarding-

policy

===============================================================================

MPLS Forwarding Policy

===============================================================================

Policy Name Binding Label Admin Oper

-------------------------------------------------------------------------------

smallername!pol1 0 Down Down

policy1-32chars-policy1-32chars 33 Up Down

fwdpolicyName!!ThisNameIs32chars 111 Up Down

-------------------------------------------------------------------------------

No. of Forwarding Policies: 3

===============================================================================

*A:Dut-B>show>router>mpls# forwarding-policies forwarding-policy detail

===============================================================================

Forwarding Policy Status (Detail)

===============================================================================

-------------------------------------------------------------------------------

Type : Label

-------------------------------------------------------------------------------

Policy Name : smallername!pol1

Admin State : Down Oper State : Down

Binding Label : 0 Preference : 2

Binding Label : 0

Last Change : 03/28/2018 23:52:45

Ingress Stats : Disabled

-------------------------------------------------------------------------------

Type : Label

-------------------------------------------------------------------------------

Policy Name : policy1-32chars-policy1-32chars

Admin State : Up Oper State : Down

Binding Label : 33 Preference : 254

Binding Label : 33

Last Change : 03/28/2018 23:57:33

Ingress Stats : Disabled

Next-hop Group : 20

Admin State : Up Oper State : Down

Resolution Type : direct

Last Change : 03/28/2018 23:57:32

Primary

Oper State : Down NH Addr : 2.2.2.2

Last Change : 03/28/2018 23:57:32

Backup

Oper State : Down NH Addr : 3.3.3.3

Last Change : 03/28/2018 23:57:32

===============================================================================

status

Syntax

status

Context

show>router>mpls>forwarding-policies

Description

This command displays MPLS Forwarding status information

Output

Table 52 describes MPLS forward-policy status output fields.

Table 52: MPLS Forward-policy Status Output Fields

Label	Description
Reserved label bl	Specifies the MPLS reserved label block name.

Sample Output

*A:Dut-B>show>router>mpls# forwarding-policies status

===============================================================================

Forwarding Policy Status

===============================================================================

Admin Status : Up Oper Status : Down

Reserved label bl: reservedlabel!!!blockname32chars

===============================================================================

4.9.2.2. Clear Commands

forwarding-policy

Syntax

forwarding-policy name egress-stats

Context

clear>router>mpls>forwarding-policies

Description

This command clears the egress statistics of the specified forwarding policy instance.

Parameters

name—

Specifies the forwarding policy name up to 64 characters.

egress-stats—

Clears the egress statistics of the specified forwarding policy.

4.9.2.3. Monitor Commands

forwarding-policy

Syntax

forwarding-policy plcy egress-stats [interval seconds] [repeat repeat] [{absolute | rate}]

Context

monitor>router>mpls>forwarding-policies

Description

This command clears the egress statistics of the specified forwarding policy instance.

Parameters

plcy—

Specifies the forwarding policy up to 64 characters.

egress-stats—

Monitors the egress statistics of the specified forwarding policy.

seconds—

Configures the interval for each display in seconds.

Values—

3 to 60

repeat—

Configures how many times the command is repeated.

Values—

1 to 999

absolute—

Displays the absolute statistics of the specified forwarding policy.

rate—

Displays the rate statistics of the specified forwarding policy.