Services are configured on access ports used for customer-facing traffic. If a Service Access Port (SAP) is to be configured on a port, it must be configured as access mode. When a port is configured for access mode, the appropriate encapsulation type can be specified to distinguish the services on the port. After a port has been configured for access mode, multiple services may be configured on the port.
The following example shows an Ethernet access port configuration:
A:ALA-A>config>port# info
----------------------------------------------
description "Ethernet access port"
access
egress
pool
slope-policy "slopePolicy1"
exit
exit
exit
network
egress
pool
slope-policy "slopePolicy2"
exit
exit
exit
ethernet
mode access
encap-type dot1q
exit
no shutdown
----------------------------------------------
A:ALA-A>config>port#