This section gives an example configuration for BEB1 from Figure 1.
*A:BEB1>config>service# info
----------------------------------------------
pbb
source-bmac 00:00:00:00:11:11
mac-name "remote-BEB" 00:44:44:44:44:44
exit
sdp 1 mpls create
far-end 10.1.1.4
ldp
keep-alive
shutdown
exit
source-bmac-lsb 33:33 control-pw-vc-id 100
no shutdown
exit
vpls 10 customer 1 b-vpls create
service-mtu 1532
stp
shutdown
exit
spb 1024 fid 1 create
no shutdown
exit
sap 1/1/1:10 create
spb create
no shutdown
exit
exit
sap 1/1/5:10 create
spb create
no shutdown
exit
exit
no shutdown
exit
epipe 100 customer 1 create
pbb
tunnel 10 backbone-dest-mac "remote-BEB" isid 100
exit
spoke-sdp 1:100 create
use-sdp-bmac
no shutdown
exit
no shutdown
exit
epipe 101 customer 1 create
pbb
tunnel 10 backbone-dest-mac "remote-BEB" isid 101
exit
spoke-sdp 1:101 create
use-sdp-bmac
no shutdown
exit
no shutdown
exit
----------------------------------------------
*A:BEB1>config>service#
The SDP control pseudowire information can be seen using this command:
*A:BEB1# show service sdp 1 detail
===============================================================================
Service Destination Point (Sdp Id : 1) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 1 -10.1.1.4
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 1 SDP Source : manual
...
Src B-MAC LSB : 33-33 Ctrl PW VC ID : 100
Ctrl PW Active : Yes
...
===============================================================================
*A:BEB1#
The configuration of a pseudowire to support remote active/standby PBB Epipe operation can be seen using this command:
*A:BEB1# show service id 100 sdp 1:100 detail
===============================================================================
Service Destination Point (Sdp Id : 1:100) Details
===============================================================================
-------------------------------------------------------------------------------
Sdp Id 1:100 -(10.1.1.4)
-------------------------------------------------------------------------------
Description : (Not Specified)
SDP Id : 1:100 Type : Spoke
...
Use SDP B-MAC : True
...
===============================================================================
*A:BEB1#8.C