Use the following CLI syntax to create a spoke-SDP binding with an Apipe service.
CLI syntax:
config>service# apipe service-id [customer customer-id] [vpn vpn-id] [vc-type {atm-vcc|atm-sdu|atm-vpc|atm-cell}] [vc-switching]
— spoke-sdp sdp-id:vc-id
— cell-concatenation
— aal5-frame-aware
— clp-change
— max-cells cell-count
— max-delay delay-time
— egress
— vc-label egress-vc-label
— ingress
— vc-label ingress-vc-label
— no shutdown
The following example displays the command usage to create Apipe spoke-SDPs:
PE router 1 (A:ALA-41), example:
A:ALA-41>config>service# apipe 5
A:ALA-41>config>service>apipe# spoke-sdp 1:5 create
A:ALA-41>config>service>apipe>spoke-sdp# no shutdown
A:ALA-41>config>service>apipe>spoke-sdp# exit
PE router 2 (A:ALA-42), example:
A:ALA-42>config>service# apipe 5
A:ALA-42>config>service>apipe# spoke-sdp 1:5 create
A:ALA-42>config>service>apipe>spoke-sdp# no shutdown
A:ALA-42>config>service>apipe>spoke-sdp# exit
The following output shows the Apipe spoke-SDP configurations.
PE router 1 (ALA-41):
A:ALA-41>config>service# info
-------------------------------------
...
apipe 5 customer 1 create
description "apipe test"
service-mtu 1400
sap 1/1/1:0/32 create
ingress
qos 102
exit
egress
qos 103
exit
exit
spoke-sdp 1:5 create
exit
no shutdown
exit
...
-------------------------------------
A:ALA-41>config>service#
PE router 2 (ALA-42):
A:ALA-42>config>service# info
-------------------------------------
...
apipe 5 customer 1 create
description "apipe test"
service-mtu 1400
sap 2/2/2:0/32 create
ingress
qos 102
exit
egress
qos 103
exit
exit
spoke-sdp 1:5 create
exit
no shutdown
exit
...
-------------------------------------
A:ALA-42>config>service#