Use the following CLI syntax to configure Fpipe SAP parameters.
CLI syntax:
config>service# fpipe service-id [customer customer-id] [vpn vpn-id] [vc-type {fr-dlci}] [vc-switching]
— sap sap-id
— accounting-policy acct-policy-id
— collect-stats
— description description-string
— egress
— filter [ip ip-filter-id]
— qos policy-id
— scheduler-policy scheduler-policy-name
— ingress
— filter [ip ip-filter-id]
— qos policy-id [shared-queuing]
— scheduler-policy scheduler-policy-name
— multi-service-site customer-site-name
— no shutdown
The following example shows the command usage to create an Fpipe SAP:
PE router 1 (A:ALA-41), example:
A:ALA-41>config>service# fpipe 1
A:ALA-41>config>service>fpipe# sap 1/2/1:16 create
A:ALA-41>config>service>fpipe>sap# ingress
A:ALA-41>config>service>fpipe>sap>ingress# qos 101
A:ALA-41>config>service>fpipe>sap>ingress# exit
A:ALA-41>config>service>fpipe>sap# egress
A:ALA-41>config>service>fpipe>sap>egress# qos 1020
A:ALA-41>config>service>fpipe>sap>egress# exit
A:ALA-41>config>service>fpipe>sap# no shutdown
A:ALA-41>config>service>fpipe>sap# exit
A:ALA-41>config>service>fpipe#
PE router 2 (A:ALA-42), example:
A:ALA-42>config>service# fpipe 1
A:ALA-42>config>service>fpipe# sap 2/1/1.1:16 create
A:ALA-42>config>service>fpipe>sap# ingress
A:ALA-42>config>service>fpipe>sap>ingress# qos 101
A:ALA-42>config>service>fpipe>sap>ingress# exit
A:ALA-42>config>service>fpipe>sap# egress
A:ALA-42>config>service>fpipe>sap>egress# qos 1020
A:ALA-42>config>service>fpipe>sap>egress# exit
A:ALA-42>config>service>fpipe>sap# no shutdown
A:ALA-42>config>service>fpipe>sap# exit
A:ALA-42>config>service>fpipe#
The following example shows the Fpipe SAP configuration:
PE router 1 (ALA-41):
A:ALA-41>config>service# info
-------------------------------------
...
fpipe 1 customer 1 create
description "fpipe test"
service-mtu 1400
sap 1/2/1:16 create
ingress
qos 101
exit
egress
qos 1020
exit
exit
no shutdown
exit
...
-------------------------------------
A:ALA-41>config>service#
PE router 2 (ALA-42):
A:ALA-42>config>service# info
-------------------------------------
...
fpipe 1 customer 1 create
description "fpipe test"
service-mtu 1400
sap 2/1/1.1:16 create
ingress
qos 101
exit
egress
qos 1020
exit
exit
no shutdown
exit
...
-------------------------------------
A:ALA-42>config>service#