Use the following CLI syntax to create a spoke-SDP binding with an Fpipe service.
CLI syntax:
config>service# fpipe service-id [customer customer-id] [vpn vpn-id] [vc-type {fr-dlci}] [vc-switching]
— spoke-sdp sdp-id:vc-id
— egress
— filter ip ip-filter-id
— vc-label egress-vc-label
— ingress
— filter ip ip-filter-id
— vc-label ingress-vc-label
— no shutdown
The following example shows the command usage to create an Fpipe spoke-SDP:
PE router 1 (A:ALA-41), example:
A:ALA-41>config>service# fpipe 1
A:ALA-41>config>service>fpipe# spoke-sdp 1:1 create
A:ALA-41>config>service>spoke-sdp# no shutdown
A:ALA-41>config>service>spoke-sdp# exit
PE router 2 (A:ALA-42), example:
A:ALA-42>config>service# fpipe 1
A:ALA-42>config>service>fpipe# spoke-sdp 1:1 create
A:ALA-42>config>service>spoke-sdp# no shutdown
A:ALA-42>config>service>spoke-sdp# exit
The following example shows the Fpipe spoke-SDP configuration:
PE router 1 (ALA-41):
A:ALA-41>config>service# info
-------------------------------------
...
fpipe 1 customer 1 create
description "fpipe test"
service-mtu 1400
sap 1/2/1:16 create
ingress
qos 101
exit
egress
qos 1020
exit
exit
spoke-sdp 1:1 create
exit
no shutdown
exit
...
-------------------------------------
A:ALA-41>config>service#
PE router 2 (ALA-42):
A:ALA-42>config>service# info
-------------------------------------
...
fpipe 1 customer 1 create
description "fpipe test"
service-mtu 1400
sap 2/1/1.1:16 create
ingress
qos 101
exit
egress
qos 1020
exit
exit
spoke-sdp 1:1 create
exit
no shutdown
exit
...
-------------------------------------
A:ALA-42>config>service#