To configure a basic local Epipe service, enter the sap sap-id command twice with different port IDs in the same service configuration.
By default, QoS policy ID 1 is applied to ingress and egress service SAPs. Existing filter policies or other existing QoS policies can be associated with service SAPs on ingress and egress ports. Table 1 shows supported SAP types.
| Uplink type | Svc SAP Type |
Cust. VID | Access SAPs | Network SAPs |
|---|---|---|---|---|
L2 |
Null-star |
— |
Null, dot1q * |
Q.* |
L2 |
Dot1q |
— |
Dot1q |
Q.* |
L2 |
Dot1q-preserve |
— |
Dot1q (encap = X) |
Q1.Q2 (where Q2 = X) |
An existing scheduler policy can be applied to ingress and egress SAPs to be used by the SAP queues and, at egress only, policers. The schedulers comprising the policy are created when the scheduler policy is applied to the SAP. If any policers or orphaned queues (with a non-existent local scheduler defined) exist on a SAP and the policy application creates the required scheduler, the status on the queue becomes non-orphaned at this time.
Ingress and egress SAP parameters can be applied to local and distributed Epipe service SAPs.
The following example shows the SAP configurations for local Epipe service 500 on SAP 1/1/2 and SAP 1/1/3 on ALA-1:
A:ALA-1>config>service# epipe 500 customer 5 create
config>service>epipe$ description "Local epipe service"
config>service>epipe# sap 1/1/2:0 create
config>service>epipe>sap? ingress
config>service>epipe>sap>ingress# qos 20
config>service>epipe>sap>ingress# filter ip 1
config>service>epipe>sap>ingress# exit
config>service>epipe>sap# egress
config>service>epipe>sap>egress# qos 20
config>service>epipe>sap>egress# scheduler-policy test1
config>service>epipe>sap>egress# exit
config>service>epipe>sap# no shutdown
config>service>epipe>sap# exit
config>service>epipe# sap 1/1/3:0 create
config>service>epipe>sap# ingress
config>service>epipe>sap>ingress# qos 555
config>service>epipe>sap>ingress# filter ip 1
config>service>epipe>sap>ingress# exit
config>service>epipe>sap# egress
config>service>epipe>sap>egress# qos 627
config>service>epipe>sap>egress# scheduler-policy alpha
config>service>epipe>sap>egress# exit
config>service>epipe>sap# no shutdown
config>service>epipe>sap# exit
The following example shows the local Epipe configuration:
A:ALA-1>config>service# info
----------------------------------------------
...
epipe 500 customer 5 vpn 500 create
description "Local epipe service"
sap 1/1/2:0 create
ingress
qos 20
filter ip 1
exit
egress
scheduler-policy "test1"
qos 20
exit
exit
sap 1/1/3:0 create
ingress
qos 555
filter ip 1
exit
egress
scheduler-policy "alpha"
qos 627
exit
exit
no shutdown
exit
----------------------------------------------
A:ALA-1>config>service#