Re-enabling an Fpipe service

Use the following CLI syntax to re-enable an Fpipe service that was shut down.

CLI syntax:

config>service#
fpipe service-id 
  no shutdown

PE router 1 (A:ALA-41), example:

A:ALA-41>config>service# fpipe 1
A:ALA-41>config>service>fpipe# no shutdown
A:ALA-41>config>service>fpipe# exit

PE router 2 (A:ALA-42), example:

A:ALA-42>config>service# fpipe 1
A:ALA-42>config>service>fpipe# no shutdown 
A:ALA-42>config>service>fpipe# exit