7.1. ecmp

ecmp

Syntax

ecmp

Context

[Tree] (show>router ecmp)

Full Contexts

show router ecmp

Supported Platforms

All

Description

This command displays the ECMP settings for the router.

Output

The following output is an example of ECMP settings information, and Table 119 describes the output fields for the router ECMP settings.

Sample Output

A:ALA-A# show router ecmp

===============================================================================

Router ECMP

===============================================================================

Instance Router Name ECMP Configured-ECMP-Routes

-------------------------------------------------------------------------------

1 Base True 8

===============================================================================

A:ALA-A#

*A:Dut-C# show router ecmp

===============================================================================

Router ECMP

===============================================================================

Instance Router Name ECMP Max-ECMP- Weight ECMP

Rtes

-------------------------------------------------------------------------------

1 Base True 32 True

===============================================================================

Table 119: ECMP Fields

Label	Description
Instance	The router instance number
Router Name	The name of the router instance
ECMP	False — ECMP is disabled for the instance True — ECMP is enabled for the instance
Configured-ECMP-Routes	The number of ECMP routes configured for path sharing

7.2. edit-ipoe-session

edit-ipoe-session

Syntax

edit-ipoe-session sap sap-id mac mac-address [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ancp-string ancp-string] [app-profile-string app-profile-string] [circuit-id circuit-id] [remote-id remote-id]

Context

[Tree] (tools>perform>subscr-mgmt edit-ipoe-session)

Full Contexts

tools perform subscriber-mgmt edit-ipoe-session

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command updates the data of the IPoE session identified with the given MAC address and SAP identifier. Optionally the remote ID and circuit ID can be specified to identify the IPoE session to update.

Note:

The changes take effect immediately.

7.3. edit-lease-state

edit-lease-state

Syntax

edit-lease-state sap sap-id ip ip-address [mac ieee-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [app-profile-string [app-profile-string] [inter-dest-id intermediate-destination-id] [ancp-string ancp-string]

edit-lease-state svc-id service-id ip ip-address [mac ieee-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [app-profile-string [app-profile-string] [inter-dest-id intermediate-destination-id] [ancp-string ancp-string]

Context

[Tree] (tools>perform>subscr-mgmt edit-lease-state)

Full Contexts

tools perform subscriber-mgmt edit-lease-state

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command provides the parameters to edit lease state information.

Parameters

sap-id—

Specifies the physical port identifier portion of the SAP definition.

ip-address—

Modifies lease state information for the specified IP address.

ieee-address —

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.

sub-ident-string—

Modifies the lease state information for the specified subscriber identification.

sub-profile-string—

Modifies lease state information for the specified subscriber profile.

sla-profile-string—

Modifies lease state information for the specified SLA profile.

service-id—

Modifies lease state information for the specified service ID.

Values—

service-id:	1 to 2147483647
svc-name:	64 characters maximum

7.4. edit-ppp-session

edit-ppp-session

Syntax

edit-ppp-session sap sap-id [user-name user-name] [mac mac-address] [session-id session-id] [ip-address ip-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ancp-string ancp-string] [app-profile-string app-profile-string]

edit-ppp-session svc-id service-id [user-name user-name] [mac mac-address] [session-id session-id] [ip-address ip-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ancp-string ancp-string] [app-profile-string app-profile-string]

Context

[Tree] (tools>perform>subscr-mgmt edit-ppp-session)

Full Contexts

tools perform subscriber-mgmt edit-ppp-session

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command updates the data of the PPP session identified with the given MAC address and SAP identifier. Optionally the remote-id and circuit-id can be specified to identify the IPoE session to update.

Note:

The changes take immediate effect.

Parameters

sap-id—

Specifies a SAP ID, up to 255 characters.

user-name—

Specifies the PPP user name, up to 253 characters.

mac-address—

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.

session-id—

Specifies information about the ID of the PPP session.

Values—

1 to 65535

sub-ident-string —

Specifies an existing subscriber identification profile.

sla-profile-string—

Identifies the SLA profile string up, to 16 characters.

ip-address—

Specifies the peer’s IP address.

service-id—

Specifies an existing subscriber service ID.

Values—

1 to 2147483647

sub-profile-string—

Specifies the subscriber profile string, up to 16 characters.

sub-profile-name—

Specifies the subscriber profile name, up to 32 characters.

intermediate-destination-id—

Specifies the intermediate destination identifier which is encoded in the identification strings, up to 32 characters.

ancp-string—

Specifies the ASCII representation of the string, up to 63 characters.

app-profile-string—

Specifies the application profile string, up to 16 characters.

7.5. edit-slaac-host

edit-slaac-host

Syntax

edit-slaac-host sap sap-id [user-name user-name] [mac mac-address] [session-id session-id] [ip-address ip-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ancp-string ancp-string] [app-profile-string app-profile-string]

edit-slaac-host svc-id service-id [user-name user-name] [mac mac-address] [session-id session-id] [ip-address ip-address] [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string] [inter-dest-id intermediate-destination-id] [ancp-string ancp-string] [app-profile-string app-profile-string]

Context

[Tree] (tools>perform>subscr-mgmt edit-slaac-host)

Full Contexts

tools perform subscriber-mgmt edit-slaac-host

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command updates the data of the SLAAC host information.

Parameters

sap-id—

Specifies a SAP ID, up to 255 characters.

user-name—

Specifies the PPP user name up to 253 characters.

mac-address—

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.

session-id—

Specifies information about the ID of the PPP session.

Values—

1 to 65535

sub-ident-string —

Specifies an existing subscriber identification profile.

sla-profile-string—

Identifies the SLA profile string up to 16 characters.

ip-address—

Specifies the peer’s IP address.

service-id—

Specifies an existing subscriber service ID.

Values—

1 to 2147483647

sub-profile-string—

Specifies the subscriber profile string up to 16 characters.

sub-profile-name—

Specifies the subscriber profile name up to 32 characters.

intermediate-destination-id—

Specifies the intermediate destination identifier which is encoded in the identification strings up to 32 characters.

ancp-string—

Specifies the ASCII representation of the up to 63 characters.

app-profile-string—

Specifies the application profile string up to 16 characters.

7.6. efm-oam

efm-oam

Syntax

efm-oam

Context

[Tree] (show>system>ethernet efm-oam)

Full Contexts

show system ethernet efm-oam

Supported Platforms

All

Description

This command displays a system-level summary for EFM-OAM enabled ports. It includes the configuration, action, various states, and soft reset precedence for the protocol.

Output

The following output is an example of EFM-OAM summary information.

Sample Output

show system ethernet efm-oam

===============================================================================

System Configuration

===============================================================================

Grace Tx Enable : False

Dying Gasp On Reset : Disabled

===============================================================================

Active Port Configuration & State Summary

===============================================================================

Fault Header:

LinkMonitor: F = Frame, FP = Period, FS = Summary, SP = Symbol

LocalSfAct : CE = Critical, DG = Dying Gasp, EV = Event, PT = Port

PeerRDIRx : CE = Critical, DG = Dying Gasp, LF = Link, EV = Event

Table Legend

- = Not Configured, c = Configured, * = SF Active, s = Shutdown, l = Log Only

Soft Reset Header:

Gasp : T = True, F = False (A = active, I = inactive)

Grace: T = True, F = False (A = active, I = inactive)

SR (Action on Soft Reset): - = None, DG = Dying Gasp, G = Grace TLV

TF (Trigger-Fault):

- = Not configured, DG = Dying Gasp, CE = Critical Event

============================================================================

Port States LinkMonitor LocalSfAct PeerRdiRx SoftReset TF

EFM LM F FP FS SP CE DG EV PT CE DG LF EV Gasp Grace SR

----------------------------------------------------------------------------

1/1/1 Up Dn - - - - - - - s s s s l T(I) T(I) - -

1/1/6 Dn Dn - - - - - - - s s s s l T(I) T(I) - -

----------------------------------------------------------------------------

No. of ports EFM enabled: 2

============================================================================

7.7. egress-label

egress-label

Syntax

egress-label start-label [end-label]

Context

[Tree] (show>service egress-label)

Full Contexts

show service egress-label

Supported Platforms

All

Description

This command displays service information using the range of egress labels.

If only the mandatory egress-label1 parameter is specified, only services using the specified label are displayed.

If both start-label and end-label parameters are specified, the services using the range of labels X where start-label <= X <= end-label are displayed.

Use the show router ldp bindings command to display dynamic labels.

Parameters

start-label—

The starting egress label value for the label range. If only start-label is specified, services only using start-label are displayed.

Values—

0,18432 to 524287

end-label—

The ending egress label value for the label range.

Default—

The start-label value.

Values—

18432 to 524287

Output

The following output displays an example of service egress label information.

Sample Output

*A:ALA-12# show service egress-label 0 10000

==============================================================================

Martini Service Labels

==============================================================================

Svc Id Sdp Id Type I.Lbl E.Lbl

------------------------------------------------------------------------------

1 10:1 Mesh 0 0

1 20:1 Mesh 0 0

1 30:1 Mesh 0 0

1 100:1 Mesh 0 0

...

1 107:1 Mesh 0 0

1 108:1 Mesh 0 0

1 300:1 Mesh 0 0

1 301:1 Mesh 0 0

1 302:1 Mesh 0 0

1 400:1 Mesh 0 0

1 500:2 Spok 131070 2001

1 501:1 Mesh 131069 2000

100 300:100 Spok 0 0

200 301:200 Spok 0 0

300 302:300 Spok 0 0

400 400:400 Spok 0 0

------------------------------------------------------------------------------

Number of Bindings Found : 23

==============================================================================

*A:ALA-12#

Table 120 describes show service egress label output fields.

Table 120: Show Service Egress Command Output Fields

Label	Description
Svc Id	The ID that identifies a service.
Sdp Id	The ID that identifies an SDP.
Type	Indicates whether the SDP binding is a spoke or a mesh.
I. Lbl	The VC label used by the far-end device to send packets to this device in this service by the SDP.
E. Lbl	The VC label used by this device to send packets to the far-end device in this service by the SDP.
Number of bindings found	The total number of SDP bindings that exist within the specified egress label range.

7.8. egress-pbr

egress-pbr

Syntax

egress-pbr [detail]

Context

[Tree] (tools>dump>filter>resources egress-pbr)

Full Contexts

tools dump filter resources egress-pbr

Supported Platforms

All

Description

This command displays the number of allocated unique egress PBR destinations.

Parameters

detail—

Displays number of allocated unique egress PBR destinations together with a list of destinations and their ref counts.

Output

The following output is an example of filter resource egress PBR destination information.

Sample Output

*A:Dut-C>tools dump filter resources egress-pbr

===============================

Egress PBR destinations

===============================

Name Count

-------------------------------

All destinations 8

Unique destinations 4

===============================

*A:Dut-C# tools dump filter resources egress-pbr detail

===============================================================================

Unique egress PBR destinations

===============================================================================

Num Action Ref. count Parameters

-------------------------------------------------------------------------------

1 Esi L3 1 esi 00:00:00:00:00:00:00:00:00:01

ip 5.5.1.5

if VasToFromAccess

rtr 123

-------------------------------------------------------------------------------

2 Esi L3 2 esi 00:00:00:00:00:00:00:00:00:02

ip 5.5.0.5

if VasToFromNetwork

rtr 123

-------------------------------------------------------------------------------

3 Red-pol 3 name egress-pbr

-------------------------------------------------------------------------------

4 Red-pol 2 name ingress-pbr

===============================================================================

7.9. egress-statistics

egress-statistics

Syntax

egress-statistics color color [end-point {ipv4-address | ipv6-address}]

Context

[Tree] (show>router>segment-routing>sr-policies egress-statistics)

Full Contexts

show router segment-routing sr-policies egress-statistics

Supported Platforms

All

Description

This command displays the egress traffic statistics of the SR policy specified by its color and end-point.

Parameters

color—

Displays the color that is configured for this SR policy.

Values—

0 to 4294967295

ipv4-address | ipv6-address—

Displays the IPv4 or IPv6 address expressed in dotted decimal notation.

Values—

ipv4-address:

a.b.c.d

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D

Output

The following output is an example of egress traffic statistics of the SR policy, and Table 121 describes the output fields.

Sample Output Show Router Segment Route Policy Egress Statistics

# show router segment-routing sr-policies egress-statistics color 20102011 end-point 10.8.100.12

===============================================================================

SR-Policies Egress Statistics

===============================================================================

Egress Statistics:

Color : 20102011 Endpoint Addr : 10.8.100.12

Segment-List : 1

TunnelId : 917548 BSID : 180001

Pkt Count : 0 Octet Count : 0

Egress Statistics:

Color : 20102011 Endpoint Addr : 10.8.100.12

Segment-List : 2

TunnelId : 917548 BSID : 180001

Pkt Count : 0 Octet Count : 0

===============================================================================

#

show router segment-routing sr-policies egress-statistics color 10 end-point 3ffe::a14:102

===============================================================================

SR-Policies Egress Statistics

===============================================================================

Egress Statistics:

Color : 10 Endpoint Addr : 3ffe::a14:102

Segment-List : 1

TunnelId : 917520 BSID : 100008

Pkt Count : 3015 Octet Count : 313560

===============================================================================

Table 121: Show Egress Statistics Field Descriptions

Label	Description
Color	Indicates the color of the SR policy.
Endpoint Addr	Indicates the endpoint address of the SR policy.
Segment-List	Indicates the index of the segment list.
TunnelId	Indicates the tunnel identifier of the SR policy.
BSID	Indicates the binding SID value.
Pkt Count	Indicates the count of packets for the corresponding segment list.
Octet Count	Indicates the count of octets for the corresponding segment list.

egress-statistics

Syntax

egress-statistics color color [end-point {ipv4-address | ipv6-address}]

Context

[Tree] (clear>router>segment-routing>sr-policies egress-statistics)

Full Contexts

clear router segment-routing sr-policies egress-statistics

Supported Platforms

All

Description

This command clears the egress traffic statistics of the SR policy specified by its color and end-point.

Parameters

color—

Displays the color that is configured for this SR policy.

Values—

0 to 4294967295

ipv4-address | ipv6-address—

Displays the IPv4 or IPv6 address expressed in dotted decimal notation.

Values—

ipv4-address:

a.b.c.d

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D

7.10. elmi

elmi

Syntax

elmi

Context

[Tree] (show elmi)

Full Contexts

show elmi

Supported Platforms

All

Description

This command displays Ethernet Link Management Interface (E-LMI) information.

Table 122 describes the output fields for the show elmi command.

Table 122: Output Fields: show elmi

Field	Description
Link Status	Status of the E-LMI protocol when the elmi mode is set to uni-n. Link Status will indicate up if E-LMI mode is set to "none".
T391	Pooling timer used by UNI-C. UNI-N will send the consecutive single EVC asynchronous status messages every (T391/10) rounded to the second interval.
T392	Pooling verification timer for UNI-N
N393	Status counter for UNI-N.
Rx Enq. Time	Last time a status inquiry message was received from UNI-C.
Rx Enq. Msg	Number of status inquiry messages received.
Rx Check Time	Last time a status inquiry E-LMI check message was received.
Rx Inv. SeqNum	Counts the number of E-LMI messages received with invalid sequence number.
Enq Timeouts	Counts the number of T392 timer expired.
Tx Status Time	Last time a status message was sent by UNI-N.
Tx Status Msg	Number of status messages sent by UNI-N.
Tx Check Time	Last time a status E-LMI check message was sent by UNI-N.
Tx Async Status Msg	Counter for single EVC asynchronous status messages sent by UNI-N.
Discard Msg	Counter for the status inquiry messages discarded due to errors.

7.11. encryption-keygroup

encryption-keygroup

Syntax

encryption-keygroup keygroup-id [spi spi]

Context

[Tree] (show>grp-encryp encryption-keygroup)

Full Contexts

show group-encryption encryption-keygroup

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Description

This command displays NGE information for a key group.

Parameters

keygroup-id—

Specifies the key group identifier to use for the output display.

Values—

1 to 15 or keygroup-name (up to 64 characters)

spi—

Specifies the SPI to use for the output display.

Output

The following output is an example of encryption key group information, and Table 123 describes the fields.

Output Example

domain1>show>grp-encryp# encryption-keygroup 2

===============================================================================

Encryption Keygroup Configuration Detail

===============================================================================

Keygroup Id : 2

Keygroup Name : KG1_secure

Description : Most_secure_KG

Authentication Algo: sha256

Encryption Algo : aes128

Active Outbound SA : 6

Activation Time : 04/20/2015 20:07:31

-------------------------------------------------------------------------------

Security Associations

-------------------------------------------------------------------------------

Spi : 2

Install Time : 04/20/2015 20:08:17

Key CRC : 0x806fb970

Spi : 6

Install Time : 04/20/2015 19:43:40

Key CRC : 0xa4f2d262

-------------------------------------------------------------------------------

Encryption Keygroup Forwarded Statistics

-------------------------------------------------------------------------------

Encrypted Pkts : 0 Encrypted Bytes : 0

Decrypted Pkts : 0 Decrypted Bytes : 0

-------------------------------------------------------------------------------

Encryption Keygroup Outbound Discarded Statistics (Pkts)

-------------------------------------------------------------------------------

Total Discard : 0 Unsupported Uplink : 0

Enqueue Error : 0 Other : 0

-------------------------------------------------------------------------------

Encryption Keygroup Inbound Discarded Statistics (Pkts)

-------------------------------------------------------------------------------

Total Discard : 0 Invalid Spi : 0

Authentication Failure *: 0 Control Word Mismatch : 0

Padding Error : 0 Enqueue Error : 0

Other : 0

-------------------------------------------------------------------------------

---------------------------------------------

SDP Keygroup Association Table

---------------------------------------------

SDP ID Direction

---------------------------------------------

61 Inbound Outbound

---------------------------------------------

Inbound Keygroup SDP Association Count: 1

Outbound Keygroup SDP Association Count: 1

---------------------------------------------

VPRN Keygroup Association Table

---------------------------------------------

VPRN SVC ID Direction

---------------------------------------------

12 Inbound Outbound

---------------------------------------------

Inbound Keygroup VPRN Association Count: 1

Outbound Keygroup VPRN Association Count: 1

---------------------------------------------

===============================================================================

* indicates that the corresponding row element may have been truncated.

domain1>show>grp-encryp#

domain1# show group-encryption encryption-keygroup 1 spi 1

===============================================================================

Encryption Keygroup Security Association Detail

===============================================================================

Keygroup Id : 1 SPI Id : 1

Install Time : 06/16/2015 11:28:49

Key CRC : 0x36e5af55

-------------------------------------------------------------------------------

Encryption Keygroup Security Association Forwarded Statistics

-------------------------------------------------------------------------------

Encrypted Pkts : 1662534 Encrypted Bytes : 837917136

Decrypted Pkts : 1662333 Decrypted Bytes : 837815832

-------------------------------------------------------------------------------

Encryption Keygroup Security Association Outbound Discarded Statistics (Pkts)

-------------------------------------------------------------------------------

Total Discard : 0 Enqueue Error : 0

Other : 0

-------------------------------------------------------------------------------

Encryption Keygroup Security Association Inbound Discarded Statistics (Pkts)

-------------------------------------------------------------------------------

Total Discard : 0 Authentication Failure : 0

Control Word Mismatch : 0 Padding Error : 0

Enqueue Error : 0 Other : 0

===============================================================================

Table 123: Show Encryption Key Group Output Fields

Label	Description
Encryption Keygroup Configuration Detail
Keygroup Id	The key group identifier
Keygroup Name	The key group name
Description	The key group description
Authentication Algo	The authentication algorithm used for the key group
Encryption Algo	The encryption algorithm used for the key group
Active Outbound SA	The active outbound SA for the key group
Activation Time	The date and time that the key group was activated
Security Associations
Spi	The security parameter index for the SA in the key group
Install Time	The date and time that the SA was installed in the key group
Key CRC	The CRC for the key belonging to the SA
Encryption Keygroup Forwarded Statistics
Encrypted Pkts	The number of encrypted packets forwarded by the key group
Encrypted Bytes	The number of encrypted bytes forwarded by the key group
Decrypted Pkts	The number of decrypted packets forwarded by the key group
Decrypted Bytes	The number of decrypted bytes forwarded by the key group
Encryption Keygroup Outbound Discarded Statistics (Pkts)
Total Discard	The total number of outbound packets discarded by the key group
Unsupported Uplink	The total number of outbound packets discarded by the key group due to an unsupported uplink
Enqueue Error	The total number of outbound packets discarded by the key group due to an enqueuing error
Other	The total number of outbound packets discarded by the key group due to some other reason, such as an internal configuration error (for example, a key group that points to an SA, but the SA is not valid)
Encryption Keygroup Inbound Discarded Statistics (Pkts)
Total Discard	The total number of inbound packets discarded by the key group
Invalid Spi	The total number of inbound packets discarded by the key group due to an invalid SPI
Authentication Failure *	The total number of inbound packets discarded by the key group due to an authorization failure
Control Word Mismatch	The total number of inbound packets discarded by the key group due to a control word (CW) mismatch between the encrypted (protected) CW in the ESP payload and the CW that is not encrypted
Padding Error	The total number of inbound packets discarded by the key group due to a padding error
Enqueue Error	The total number of inbound packets discarded by the key group due to an enqueuing error
Other	The total number of inbound packets discarded by the key group due to some other reason (for example, an incoming packet length is incorrect)
SDP Keygroup Association Table
SDP ID	The SDP ID
Direction	The direction in which key group authentication and encryption occurs for traffic on the SDP
Inbound Keygroup SDP Association Count	The number of SDPs configured to use inbound SA
Outbound Keygroup SDP Association Count	The number of SDPs configured to use outbound SA
VPRN Keygroup Association Table
VPRN SVC ID	The VPRN service identifier
Direction	The direction in which key group authentication and encryption occurs for traffic on the VPRN
Inbound Keygroup VPRN Association Count	The number of VPRNs configured to use inbound SA
Outbound Keygroup VPRN Association Count	The number of VPRNs configured to use outbound SA

encryption-keygroup

Syntax

encryption-keygroup keygroup-id

encryption-keygroup keygroup-id spi spi

Context

[Tree] (clear>grp-encryp encryption-keygroup)

Full Contexts

clear group-encryption encryption-keygroup

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Description

This command clears NGE information for a key group.

Parameters

keygroup-id—

Specifies the key group identifier.

Values—

1 to 127, keygroup-name (up to 64 characters)

spi—

Specifies the SPI ID.

Values—

1 to 127

7.12. endpoint

endpoint

Syntax

endpoint [endpoint-name]

Context

[Tree] (show>service>id endpoint)

Full Contexts

show service id endpoint

Supported Platforms

All

Description

This command displays service endpoint information.

Parameters

endpoint-name—

Specifies the name of an existing endpoint for the service.

Output

The following output is an example of service endpoint information.

Sample Output

*A:ALA-48>config>service>epipe# show service id 6 endpoint

===============================================================================

Service 6 endpoints

===============================================================================

Endpoint name : x

Revert time : 0

Act Hold Delay : 0

Tx Active : none

-------------------------------------------------------------------------------

Members

-------------------------------------------------------------------------------

No members found.

===============================================================================

Endpoint name : y

Revert time : 0

Act Hold Delay : 0

Tx Active : none

-------------------------------------------------------------------------------

Members

-------------------------------------------------------------------------------

No members found.

===============================================================================

*A:ALA-48>config>service>epipe#

endpoint

Syntax

endpoint [{ip-address | ipv6-address}] [detail]

endpoint [{ip-address | ipv6-address}] egress-stats

Context

[Tree] (show>router>mpls>forwarding-policies endpoint)

Full Contexts

show router mpls forwarding-policies endpoint

Supported Platforms

All

Description

This command displays the MPLS forwarding policy endpoint information.

Parameters

ip-address—

Specifies the IPv4 address of the endpoint up to 64 characters.

ipv6-address—

Specifies the IPv6 address of the endpoint up to 64 characters.

detail—

Specifies detailed information for the endpoint.

egress-stats—

Displays the egress statistics, if any, of all the instances of the specified forwarding policy.

Output

Table 124 describes MPLS endpoint output fields.

Table 124: MPLS Endpoint Output Fields

Label	Description
Endpoint	Specifies the endpoint IP address.
Preference	Specifies the preference.
Policy Name	Specifies the MPLS forwarding policies binding label name.
Active	Specifies the active state (Y \| N).
InactiveReason	Specifies the inactive reason.
Last Updated	Specifies the date and time of the last update.
Num Grps	Specifies the number of groups.
OperState	Specifies the operational state (up \| down).
Metric	Specifies the metric value.
TTM Preference	Specifies the TTM preference value.
Revert Timer	Specifies the revert timer value.
Path Pref	Specifies the path preference.
Retry Count	Specifies the retry count.
Next Retry In	Specifies the next retry value.
Next-hop Group	Specifies the next-hop group.
Resolution Type	Specifies the resolution type (direct \| indirect).
Oper State	Specifies the operational state (down \| up).
Oper Down Reas*	Specifies the reason for being operationally down.
Num Revert	Specifies the number of reverts.
Num Failover	Specifies the number of failovers.
Next Revert In	Specifies the next revert interval.
Weight	Specifies the weight value.
Primary	Specifies the IP address of the primary next-hop.
Resolved	Specifies the resolved status (false \| true).
Down Reason	Specifies the down reason.
Backup	Specifies the IP address of the backup next-hop.
StatsOperState	Specifies if a statistic index is allocated to the next-hop.
EgrStatsState	Specifies if all next-hops have a statistic index allocated.

Sample Output

A:Dut-C# show router mpls forwarding-policies endpoint detail

===============================================================================

Endpoint (Detail)

===============================================================================

Endpoint : 10.20.1.2 Preference : 255

Policy Name : one

Active : N InactiveReason : Not Applicable

Last Updated : 09/27/2018 22:51:26 Num Grps : 2

Metric : 0 TTM Preference : 255

Revert Timer : 0 Path Pref : 255

Retry Count : 0 Next Retry In : 0

Nexthop Group : 1 Resolution Type: direct

Oper State : Down OperDownReason : Not Applicable

Num Revert : 0 Num Failover : 0

Next Revert In : 0 Weight : 0

Primary : 10.10.3.2

Resolved : False Down Reason : Not Applicable

Backup : 10.10.12.2

Resolved : False Down Reason : Not Applicable

Nexthop Group : 2 Resolution Type: direct

Oper State : Down OperDownReason : Not Applicable

Num Revert : 0 Num Failover : 0

Next Revert In : 0 Weight : 45

Primary : 10.10.3.3

Resolved : False Down Reason : Not Applicable

Backup : 10.10.4.4

Resolved : False Down Reason : Not Applicable

-------------------------------------------------------------------------------

*A:Dut-B# show router mpls forwarding-policies endpoint

===============================================================================

Endpoint Table

===============================================================================

Endpoint Preference Active

-------------------------------------------------------------------------------

10.20.1.5 2 Y

-------------------------------------------------------------------------------

No. of Tunnels: 1

show router mpls forwarding-policies endpoint 10.20.1.5 egress-stats

===============================================================================

Endpoint (Detail)

===============================================================================

Endpoint : 10.20.1.5 Preference : 255

Policy Name : cc Oper State : Up

EgrStatsState : Up

Next-hop Group : 1

Primary nexthop : 10.10.5.5

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Backup nexthop : 10.10.11.4

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Next-hop Group : 2

Primary nexthop : 10.10.5.5

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Backup nexthop : 10.10.11.4

StatsOperState : Up

Aggr Pkts: 11000 Aggr Octets: 11550000

Total Aggr :

Aggr Pkts: 44000 Aggr Octets: 46200000

-------------------------------------------------------------------------------

===============================================================================

7.13. entry

entry

Syntax

entry entry-id

Context

[Tree] (tools>perform>filter>ip-filter entry)

Full Contexts

tools perform filter ip-filter entry

Supported Platforms

All

Description

This command enables the context to perform IP filter entry operations.

Parameters

entry-id—

Specifies a particular entry ID.

Values—

1 to 2097151

entry

Syntax

entry entry-id

Context

[Tree] (tools>perform>filter>ipv6-filter entry)

Full Contexts

tools perform filter ipv6-filter entry

Supported Platforms

All

Description

This command enables the context to perform IPv6 filter entry operations.

Parameters

entry-id—

Specifies a particular entry ID.

Values—

1 to 2097151

entry

Syntax

entry entry-id

Context

[Tree] (tools>perform>filter>mac-filter entry)

Full Contexts

tools perform filter mac-filter entry

Supported Platforms

All

Description

This command enables the context to perform MAC filter entry operations.

Parameters

entry-id—

Specifies a particular entry ID.

Values—

1 to 2097151

7.14. epipe

epipe

Syntax

epipe

Context

[Tree] (show>service>id epipe)

Full Contexts

show service id epipe

Supported Platforms

All

Description

This command displays Epipe services associated with the B-VPLS service. The command only applies when the service is a B-VPLS.

Output

The following is an example of Epipe service information.

Sample Output

*A:term17>show>service>id# epipe

===============================================================================

Related Epipe services for bVpls service 2000

===============================================================================

Epipe SvcId Oper ISID Admin Oper

-------------------------------------------------------------------------------

100 100 Down Down

-------------------------------------------------------------------------------

Number of Entries : 1

-------------------------------------------------------------------------------

*A:term17>show>service>id#

7.15. epipe-map-access-to-egress-port

epipe-map-access-to-egress-port

Syntax

epipe-map-access-to-egress-port service service-id [end-service service-id] | lag lag-id summary

Context

[Tree] (tools>dump epipe-map-access-to-egress-port)

Full Contexts

tools dump epipe-map-access-to-egress-port

Supported Platforms

All

Description

This command will display the egress port that will be used to transmit traffic associated with the displayed Epipe service(s). The information displayed shows the egress port for traffic traveling from SAP to egress SDP or SAP.

This command will support Epipe services with the following combinations:

SAP to SDP (with no endpoint configuration)
SAP to SAP (with or without an ICB)
SAP to SDP using endpoints with 1 or 2 SDPs

The command can be executed by specifying either a service ID, service-ID range or an ingress LAG ID.

This command will not display the egress port for traffic traveling from the SDP to egress SAP. This command also does not work with services that use policers or shared queues and also does not support PBB services.

This command replaces the command tools dump epipe-map-to-network, which has been deprecated.

Parameters

service service-id—

Identifies the service ID for which the command will return the egress port. If used in conjunction with the end-service parameter, this value represent the beginning of the service ID range for which the command will be executed against.

Values—

1 to 2148278316, svc-name: 64 characters max

end-service service-id—

This parameter is used to identify the end of the service ID range for which the command will be executed against.

Values—

1 to 2148278316, svc-name: 64 characters max

lag-id—

This parameter caused the command to return the egress port for all service with SAPs associated with the specified LAG ID.

Values—

1 to 800

7.16. error-codes

error-codes

Syntax

error-codes

Context

[Tree] (show>app-assure>http-redirect error-codes)

Full Contexts

show application-assurance http-redirect error-codes

Description

This command displays http-error-redirect error-codes.

Output

The following output example shows HTTP error redirect error code information, and Table 125 describes the fields.

Example Output

*A:Dut-C>show application-assurance http-error-redirect error-codes

===============================================================================

Application-Assurance http-error-redirect error-codes

===============================================================================

Code Description Default custom-msg-size

-------------------------------------------------------------------------------

400 Bad Request 1024

401 Unauthorized 1024

402 Payment Required 1024

403 Forbidden 1024

404 Not Found 1024

405 Method Not Allowed 1024

406 Not Acceptable 1024

407 Proxy Authentication Required 1024

408 Request Timeout 1024

409 Conflict 1024

410 Gone 1024

411 Length Required 1024

412 Precondition Failed 1024

413 Payload Too Large 1024

414 URI Too Long 1024

415 Unsupported Media Type 1024

416 Range Not Satisfiable 1024

417 Expectation Failed 1024

421 Misdirected Request 1024

422 Unprocessable Entity 1024

423 Locked 1024

424 Failed Dependency 1024

425 Too Early 1024

426 Upgrade Required 1024

427 Unassigned 1024

428 Precondition Required 1024

429 Too Many Requests 1024

430 Unassigned 1024

431 Request Header Fields Too Large 1024

451 Unavailable For Legal Reasons 1024

500 Internal Server Error 1024

501 Not Implemented 1024

502 Bad Gateway 1024

503 Service Unavailable 1024

504 Gateway Timeout 1024

505 HTTP Version Not Supported 1024

506 Variant Also Negotiates 1024

507 Insufficient Storage 1024

508 Loop Detected 1024

509 Unassigned 1024

510 Not Extended 1024

511 Network Authentication Required 1024

730 Custom Error Code 1024

731 Custom Error Code 1024

735 Custom Error Code 1024

===============================================================================

Table 125: Show Application Assurance HTTP Redirect Error Codes Output Fields

Label	Description
Description	Describes the error
Default	Indicates what the default is for the error
custom-msg-size (Custom Message Size)	The size of the message

7.17. error-counters

error-counters

Syntax

error-counters

Context

[Tree] (tools>dump>test-oam>twamp>server error-counters)

Full Contexts

tools dump test-oam twamp server error-counters

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Description

This command dumps various error counters related to TWAMP server and TWAMP test.

Output

The following output is an example of various error counters related to TWAMP server and TWAMP test.

Sample Output

tools>dump>test-oam>twamp>server# error-counters

Dropped Connection Stats

------------------------

TCP connection closed : 0

TCP connection error : 0

Unexpected event : 0

Error sending message : 0

Error waiting for message : 0

Connection not in a prefix : 0

Max global limit : 0

Max prefix limit : 0

No mode specified : 0

Unsupported mode : 0

Invalid command : 0

Stop-sessions with bad session count : 0

Connection timeout : 0

Internal resource : 0

Invalid zero SID : 0

Invalid HMAC : 0

Dropped Connection States

-------------------------

Idle : 0

Set-up-wait : 0

Started : 0

Active : 0

Process Start : 0

Process Stop : 0

Process TW-session : 0

Rejected Session Stats

----------------------

Invalid address version: 0

Non-local destination : 0

Bad type-p : 0

Padding too big : 0

MBZ value is non-zero : 0

SID is non-zero : 0

Timeout too large : 0

Max global sessions : 0

Max prefix sessions : 0

Socket error : 0

Source unreachable : 0

Port in use : 0

Duplicate session : 0

Internal resource : 0

REFWAIT timeout : 0

Dropped Test Packet Stats

-------------------------

Packet wrong size : 0

Wrong source address : 0

Arrived before start time : 0

No Start-sessions : 0

Invalid error estimate : 0

Error sending reply : 0

Invalid Server Octets : 0

Invalid Symmetric MBZ : 0

7.18. errors

errors

Syntax

errors

Context

[Tree] (clear>subscr-mgmt errors)

Full Contexts

clear subscriber-mgmt errors

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command clears all errors in the circular buffer.

errors

Syntax

errors

Context

[Tree] (show>subscr-mgmt errors)

Full Contexts

show subscriber-mgmt errors

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command clears all errors in the circular buffer.

7.19. es-bmac

es-bmac

Syntax

es-bmac ieee-address

Context

[Tree] (show>service>id>evpn-mpls es-bmac)

Full Contexts

show service id evpn-mpls es-bmac

Description

This command shows the remote Ethernet Segment B-MACs as well as the BGP-EVPN MPLS destinations associated to them.

Parameters

ieee-address—

Specifies a 48-bit MAC address in the form xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx, where xx represents a hexadecimal number.

Output

Sample Output

*A:PE70(4)# show service id 20000 evpn-mpls es-bmac 00:00:00:00:71:71

===============================================================================

BGP EVPN-MPLS ES BMAC Dest

===============================================================================

vBmacAddr Num. Macs Last Change

-------------------------------------------------------------------------------

00:00:00:00:71:71 1 07/15/2015 19:50:22

===============================================================================

BGP EVPN-MPLS ES BMAC Dest TEP Info

===============================================================================

TEP Address Egr Label Last Change

Transport

-------------------------------------------------------------------------------

192.0.2.69 262138 07/15/2015 19:50:22

ldp

192.0.2.72 262136 07/15/2015 19:50:22

ldp

-------------------------------------------------------------------------------

Number of entries : 2

-------------------------------------------------------------------------------

===============================================================================

7.20. es-pbr

es-pbr

Syntax

es-pbr

Context

[Tree] (show>service>id es-pbr)

Full Contexts

show service id es-pbr

Supported Platforms

All

Description

When a filter with an action forward esi is successfully added to a VPLS service and the PE receives an EVPN Auto-Discovery route for the configured ESI, this command displays the PBR VXLAN bindings auto-created, including the ESI, the VXLAN VTEP:VNI and the status of the binding.

Output

Sample Output

A:PE1# show service id 301 es-pbr

===============================================================================

L2 ES PBR

===============================================================================

ESI Users Status

VTEP:VNI

-------------------------------------------------------------------------------

ff:00:00:00:00:00:00:00:00:01 1 Active

192.0.2.72:7272

-------------------------------------------------------------------------------

Number of entries : 1

-------------------------------------------------------------------------------

===============================================================================

7.21. esa

esa

Syntax

esa [detail]

Context

[Tree] (show esa)

Full Contexts

show esa

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s

Description

This command displays ESA details.

Parameters

detail—

Displays detailed ESA information.

Output

The following are output examples for this command.

Table 126 describes the ESA output fields.

Sample Output

*A:Dut-B# show esa

===============================================================================

Extended Services Appliance Summary

===============================================================================

ESA Description Admin Oper

State State

-------------------------------------------------------------------------------

6 up up

7 up up

8 up up

===============================================================================

*A:Dut-B# show esa detail

===============================================================================

ESA 6

===============================================================================

Description : (Not Specified)

Admin State : up

Operational State : up

Oper flags : none

IOM Host Port : 1/1/2

Hardware Data

System manufacturer : Nokia

System product name : ESA-100G

System serial number : 0123456781

Software Version : TiMOS-H-0.0.I6015 hypervisor/esa Copyright (c)

subject to applicable license agreements. Built

on Mon Aug 26 20:34:47 PDT 2019 by builder in /

builds/c/00/I6015/panos/hypervisors

Time of last boot : 2019/08/27 15:38:30 UTC

Cores available : 16

Cores allocated : 12

Cores remaining : 4

Memory available : 62 GB

Memory allocated : 28 GB

Memory remaining : 34 GB

Performance enabled : yes

Export restricted : no

===============================================================================

ESA-VMs

===============================================================================

ESA VM VM Type Cores Memory Admin Oper

(GB) State State

-------------------------------------------------------------------------------

6 1 aa 4 6 up up

6 2 tunnel 4 6 up up

6 3 bb 4 16 up up

===============================================================================

ESA 7

===============================================================================

Description : (Not Specified)

Admin State : up

Operational State : up

Oper flags : none

IOM Host Port : 2/1/2

Hardware Data

System manufacturer : Nokia

System product name : ESA-100G

System serial number : 0123456782

Software Version : TiMOS-H-0.0.I6015 hypervisor/esa Copyright (c)

subject to applicable license agreements. Built

on Mon Aug 26 20:34:47 PDT 2019 by builder in /

builds/c/00/I6015/panos/hypervisors

Time of last boot : 2019/08/27 15:39:27 UTC

Cores available : 16

Cores allocated : 12

Cores remaining : 4

Memory available : 62 GB

Memory allocated : 28 GB

Memory remaining : 34 GB

Performance enabled : yes

Export restricted : no

===============================================================================

ESA-VMs

===============================================================================

ESA VM VM Type Cores Memory Admin Oper

(GB) State State

-------------------------------------------------------------------------------

7 1 aa 4 6 up up

7 2 tunnel 4 6 up up

7 3 bb 4 16 up up

===============================================================================

ESA 8

===============================================================================

Description : (Not Specified)

Admin State : up

Operational State : up

Oper flags : none

IOM Host Port : 3/1/c2/1

Hardware Data

System manufacturer : Nokia

System product name : ESA-100G

System serial number : 0123456783

Software Version : TiMOS-H-0.0.I6015 hypervisor/esa Copyright (c)

subject to applicable license agreements. Built

on Mon Aug 26 20:34:47 PDT 2019 by builder in /

builds/c/00/I6015/panos/hypervisors

Time of last boot : 2019/08/27 15:39:27 UTC

Cores available : 16

Cores allocated : 12

Cores remaining : 4

Memory available : 62 GB

Memory allocated : 28 GB

Memory remaining : 34 GB

Performance enabled : yes

Export restricted : no

===============================================================================

ESA-VMs

===============================================================================

ESA VM VM Type Cores Memory Admin Oper

(GB) State State

-------------------------------------------------------------------------------

8 1 aa 4 6 up up

8 2 tunnel 4 6 up up

8 3 bb 4 16 up up

===============================================================================

*A:Dut-B# show esa 6

===============================================================================

ESA 6

===============================================================================

Description : (Not Specified)

Admin State : up

Operational State : up

Oper flags : none

IOM Host Port : 1/1/2

Hardware Data

System manufacturer : Nokia

System product name : ESA-100G

System serial number : 0123456789

Software Version : TiMOS-H-0.0.I6015 hypervisor/esa Copyright (c)

subject to applicable license agreements. Built

on Mon Aug 26 20:34:47 PDT 2019 by builder in /

builds/c/00/I6015/panos/hypervisors

Time of last boot : 2019/08/27 15:38:30 UTC

Cores available : 16

Cores allocated : 12

Cores remaining : 4

Memory available : 62 GB

Memory allocated : 28 GB

Memory remaining : 34 GB

Performance enabled : yes

Export restricted : no

===============================================================================

ESA-VMs

===============================================================================

ESA VM VM Type Cores Memory Admin Oper

(GB) State State

-------------------------------------------------------------------------------

6 1 aa 4 6 up up

6 2 tunnel 4 6 up up

6 3 bb 4 16 up up

===============================================================================

Table 126: Show ESA Output Fields

Label	Description
ESA	The ESA identification number
Admin State	up — Administratively up
Admin State	down — Administratively down
Operational State	up — Operationally up
	down — Operationally down
	booting
	failed
	provisioned
	unprovisioned
	fwUpgrade — Firmware upgrade
Oper flags	Operational flag of the ESA
IOM Host Port	The IOM host port in slot/mda/port format
Hardware Data	Detailed hardware data about the ESA
VM	The VM identification number
VM Type	The VM type (aa, bb, or tunnel)
Cores	The number of cores of the ESA-VM
Memory (GB)	The memory on the ESA-VM

esa

Syntax

esa esa-id

Context

[Tree] (clear esa)

Full Contexts

clear esa

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s

Description

This command clears the statistics or status pertaining to the specified ESA.

Parameters

esa-id—

Specifies the ESA.

Values—

1 to 16

7.22. esa-vm

esa-vm

Syntax

esa [esa-id/vm-id] [detail]

Context

[Tree] (show esa-vm)

Full Contexts

show esa-vm

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s

Description

This command displays ESA-VM details.

Parameters

esa-id—

Specifies the ESA.

Values—

1 to 16

vm-id—

Specifies the VM.

Values—

1 to 4

detail—

Specifies the detailed ESA-VM information.

Output

The following are output examples for this command.

Sample Output

*A:Dut-A# show esa-vm 1/1 detail

===============================================================================

ESA VM VM Type Cores Memory Admin Oper

(GB) State State

-------------------------------------------------------------------------------

1 1 aa 23 64 up up/active

===============================================================================

ESA/VM 1/1

===============================================================================

Description : (Not Specified)

IOM Host Port : 1/1/c1/1

Software Version : TiMOS-M-0.0.I6237 esav-aa/esavm Nokia 7xxx ESAV Copyright

license agreements.

Built on Sun Apr 5 18:08:04 PDT 2020 by builder in /

builds/c/00/I6237/panos/main/sros

Time of last boot : 2020/04/06 20:36:12 UTC

Oper flags : none

===============================================================================

VM Utilization

===============================================================================

Virtual Virtual 15min All-time

Core Role Core Id Current % Average % Peak %

-------------------------------------------------------------------------------

Mgmt-0 1 8.65 5.91 8.83

Mgmt-1 2 6.83 5.83 8.84

Mgmt-2 3 8.22 5.69 8.22

Mgmt-3 4 8.58 5.96 9.52

Worker-0 5 27.18 15.56 27.18

Worker-1 6 27.70 15.81 27.70

Worker-2 7 27.79 15.88 27.79

Worker-3 8 27.83 15.88 27.83

Worker-4 9 28.05 16.01 28.05

Worker-5 10 28.04 15.98 28.04

Worker-6 11 28.05 16.04 28.05

Worker-7 12 28.09 16.02 28.09

Worker-8 13 28.00 15.99 28.00

Worker-9 14 28.05 15.99 28.05

Worker-10 15 27.82 15.89 27.82

Worker-11 16 27.83 15.87 27.83

Worker-12 17 27.84 15.88 27.84

Worker-13 18 27.79 15.83 27.79

Worker-14 19 27.83 15.91 27.83

Worker-15 20 27.85 15.90 27.85

Worker-16 21 27.99 15.98 27.99

Worker-17 22 28.09 16.03 28.09

Worker-18 23 28.00 16.00 28.00

Worker-19 24 27.97 15.95 27.97

Worker-20 25 27.88 15.92 27.88

Worker-21 26 27.91 15.93 27.91

Worker-22 27 27.80 15.89 27.80

Worker-23 28 27.77 15.84 27.77

Worker-24 29 27.78 15.86 27.78

Worker-25 30 27.82 15.86 27.82

Worker-26 31 27.93 15.93 27.93

Worker-27 32 27.90 15.91 27.90

Worker-28 33 27.97 15.98 27.97

Worker-29 34 28.44 16.19 28.44

Worker-30 35 28.22 16.13 28.22

Worker-31 36 28.28 16.13 28.28

Worker-32 37 28.08 16.05 28.08

Worker-33 38 28.15 16.06 28.15

Worker-34 39 27.90 15.92 27.90

Worker-35 40 27.50 15.68 27.50

Worker-36 41 27.48 15.70 27.48

Worker-37 42 27.57 15.72 27.57

Idle-0 43 0.00 0.00 0.00

Scheduler-0 44 41.40 24.36 41.40

Idle-1 45 0.00 0.00 0.00

Nic-0 46 57.60 33.47 57.60

-------------------------------------------------------------------------------

===============================================================================

Table 127 describes the ESA-VM output fields.

Sample Output

*A:Dut-B# show esa-vm 6/1

===============================================================================

ESA VM VM Type Cores Memory Admin Oper

(GB) State State

-------------------------------------------------------------------------------

6 1 aa 4 6 up up

===============================================================================

ESA/VM 6/1

===============================================================================

Description : (Not Specified)

IOM Host Port : 1/1/2

Software Version : TiMOS-M-0.0.I6015 esav-aa/esavm Nokia 7xxx ESAV Copyright

license agreements.

Built on Mon Aug 26 18:04:52 PDT 2019 by builder in /

builds/c/00/I6015/panos/main

Time of last boot : 2019/08/27 15:40:54 UTC

Oper flags : none

===============================================================================

*A:Dut-B# show esa-vm 6/2

===============================================================================

ESA VM VM Type Cores Memory Admin Oper

(GB) State State

-------------------------------------------------------------------------------

6 2 tunnel 4 6 up up

===============================================================================

ESA/VM 6/2

===============================================================================

Description : (Not Specified)

IOM Host Port : 1/1/2

Software Version : TiMOS-M-0.0.I6015 esav-tunnel/esavm Nokia 7xxx ESAV

license agreements.

Built on Mon Aug 26 18:04:52 PDT 2019 by builder in /

builds/c/00/I6015/panos/main

Time of last boot : 2019/08/27 15:40:51 UTC

Oper flags : none

===============================================================================

*A:Dut-B# show esa-vm 6/3

===============================================================================

ESA VM VM Type Cores Memory Admin Oper

(GB) State State

-------------------------------------------------------------------------------

6 3 bb 4 16 up up

===============================================================================

ESA/VM 6/3

===============================================================================

Description : (Not Specified)

IOM Host Port : 1/1/2

Software Version : TiMOS-M-0.0.I6015 esav-bb/esavm Nokia 7xxx ESAV Copyright

license agreements.

Built on Mon Aug 26 18:04:52 PDT 2019 by builder in /

builds/c/00/I6015/panos/main

Time of last boot : 2019/08/27 15:41:00 UTC

Oper flags : none

===============================================================================

Table 127: Show ESA-VM Output Fields

Label	Description
ESA	The ESA identification number
VM	The VM identification number
VM Type	The VM type (aa, bb, or tunnel)
Cores	The number of cores of the ESA-VM
Memory (GB)	The memory on the ESA-VM
Admin State	up — Administratively up
Admin State	down — Administratively down
Operational State	up — Operationally up
	down — Operationally down
	booting
	failed
	provisioned
	unprovisioned
IOM Host Port	The IOM host port in slot/mda/port format
Oper flags	The operational flags for the ESA-VM
Virtual Core Role	The virtual core role (Mgmt-#, Worker-#, Idle-#, Scheduler-#, Nic-#)
Virtual Core Id	The Virtual Core identification number
Current %	The current processing load of the virtual core
15min Average %	The 15 minute average processing load of the virtual core
All-time Peak %	The all-time peak processing load of the virtual core

esa-vm

Syntax

esa-vm [esa-id/vm-id]

Context

[Tree] (clear esa-vm)

Full Contexts

clear esa-vm

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s

Description

This command clears the statistics or status pertaining to the specified ESA-VM.

Parameters

esa-id—

Specifies the ESA.

Values—

1 to 16

vm-id—

Specifies the VM.

Values—

1 to 4

esa-vm

Syntax

esa-vm [esa-id/vm-id]

Context

[Tree] (clear esa-vm)

Full Contexts

clear esa-vm

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s

Description

This command clears the statistics or status pertaining to the specified ESA-VM.

Parameters

esa-id—

Specifies the ESA.

Values—

1 to 16

vm-id—

Specifies the VM.

Values—

1 to 4

7.23. esi

esi

Syntax

esi esi

Context

[Tree] (show>service>id>evpn-mpls esi)

Full Contexts

show service id evpn-mpls esi

Description

This command shows the remote Ethernet Segment identifiers (ESIs) as well as the BGP-EVPN MPLS destinations associated to them.

Parameters

esi—

Specifies a 10-byte ESI.

Output

Sample Output

*A:PE71(1)# show service id 1 evpn-mpls esi 01:00:00:00:00:71:00:00:00:01

===============================================================================

BGP EVPN-MPLS Ethernet Segment Dest

===============================================================================

Eth SegId Num. Macs Last Change

-------------------------------------------------------------------------------

01:00:00:00:00:71:00:00:00:01 1 07/17/2015 18:31:27

===============================================================================

BGP EVPN-MPLS Dest TEP Info

===============================================================================

TEP Address Egr Label Last Change

Transport

-------------------------------------------------------------------------------

192.0.2.69 262141 07/17/2015 18:31:26

ldp

192.0.2.72 262141 07/17/2015 18:31:26

ldp

-------------------------------------------------------------------------------

Number of entries : 2

-------------------------------------------------------------------------------

===============================================================================

7.24. eth

eth

Syntax

eth

Context

[Tree] (tools>perform>service>id>loopback eth)

Full Contexts

tools perform service id loopback eth

Supported Platforms

All

Description

This command enables the context to configure a loopback on Ethernet SAPs or MPLS SDP bindings.

7.25. eth-cfm

eth-cfm

Syntax

eth-cfm

Context

[Tree] (show eth-cfm)

Full Contexts

show eth-cfm

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Description

This command enables the context to display eth-cfm information.

eth-cfm

Syntax

eth-cfm

Context

[Tree] (clear eth-cfm)

Full Contexts

clear eth-cfm

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Description

This command enables the context to display CFM information.

eth-cfm

Syntax

eth-cfm

Context

[Tree] (tools>dump eth-cfm)

Full Contexts

tools dump eth-cfm

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Description

This command enables the context to configure debugging for Ethernet Connectivity Fault Management.

7.26. eth-cfm-monitoring

eth-cfm-monitoring

Syntax

eth-cfm-monitoring [{service-id service-id sap-id sap-id} | {service-id service-id sdp-id sdp-id:vc-id}]

Context

[Tree] (show>system>security>cpu-protection eth-cfm-monitoring)

Full Contexts

show system security cpu-protection eth-cfm-monitoring

Supported Platforms

7450 ESS, 7750 SR-14s, 7750 SR-7/12/12e, 7750 SR-7s, 7950 XRS

Description

This command displays sources exceeding their eth-cfm-monitoring rate limit.

Parameters

service-id—

Specifies the service ID.

Values—

1 to 2148278317, svc-name up to 64 characters in length

7.27. eth-ring

eth-ring

Syntax

eth-ring

Context

[Tree] (tools>perform eth-ring)

Full Contexts

tools perform eth-ring

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Description

This command performs Ethernet ring operations.

eth-ring

Syntax

eth-ring [status]

eth-ring [ring-index] hierarchy

eth-ring ring-index [path {a | b}]

Context

[Tree] (show eth-ring)

Full Contexts

show eth-ring

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Description

This command displays Ethernet Ring information.

Parameters

status—

Specifies to display an Ethernet Ring status summary

ring-index—

Specifies an Ethernet Ring index

Values—

1 to 128

hierarchy—

Specifies to display Ethernet Ring hierarchical relationships

path—

Specifies to show information for a specific path

eth-ring

Syntax

eth-ring ring-index [clear]

Context

[Tree] (tools>dump eth-ring)

Full Contexts

tools dump eth-ring

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Description

This command displays Ethernet Ring information.

Parameters

ring-index—

Specifies an Ethernet Ring index.

Values—

1 to 128

clear—

Keyword to clear stored information for the specified Ethernet Ring.

7.28. eth-sat

eth-sat

Syntax

eth-sat [sat-id]

Context

[Tree] (show>system>satellite eth-sat)

Full Contexts

show system satellite eth-sat

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Description

This command displays information about configured Ethernet satellites. If a sat-id is specified, this command displays information only about the specified Ethernet satellite.

Parameters

sat-id—

Specifies the Ethernet satellite chassis.

Output

The following output is an example of Ethernet satellite information.

Sample Output

A:Dut-A# show system satellite eth-sat 1

===============================================================================

Satellite Information

===============================================================================

SatID Provisioned Type Admin Oper

Equipped Type (if different) State State

-------------------------------------------------------------------------------

esat-1 es48-1gb-sfp up up

Description : (Not Specified)

MAC Address : e4:81:84:24:2e:e5

Software Repository : rep1

SyncE : Disabled

Client-Down-Delay : Disabled | 5-1800sec

Hardware Data

Platform type : N/A

Part number : 82-0825-01

CLEI code :

Serial number : 01154100020

Manufacture date :

Manufacturing deviations : (Not Specified)

Manufacturing assembly number :

Administrative state : up

Operational state : up

Temperature : 51C

Temperature threshold : 85C

Software boot (rom) version : X-9.0.S222 on Thu Feb 16 03:29:00 IST 20xx

by builder

Software version : TiMOS-B-8.0.R9 both/hops Nokia SAS-Sx

Nokia.

applicable license agreements.

Built on Mon Oct 31 10:10:30 IST 2020 by

builder in /home/builder/8.0B1/R9/panos/

main

Time of last boot : 2020/02/28 13:02:41

Current alarm state : alarm cleared

Base MAC address : e4:81:84:24:2e:e5

===============================================================================

*A:Dut-A>config>system>sat>eth-sat# /show system satellite eth-sat 1

===============================================================================

Satellite Information

===============================================================================

SatID Provisioned Type Admin Oper

Equipped Type (if different) State State

-------------------------------------------------------------------------------

esat-1 es48-1gb-sfp up up

Description : (Not Specified)

MAC Address : 8c:f7:73:cc:ca:61

Software Repository : rep1

SyncE : Disabled

PTP-TC : Disabled

Client-Down-Delay : Disabled

Console Access : Enabled

Port-Template : (Not Specified)

7.29. eth-tunnel

eth-tunnel

Syntax

eth-tunnel [group tunnel-group-name] [vc-id vc-id]]

Context

[Tree] (show>router>l2tp eth-tunnel)

Full Contexts

show router l2tp eth-tunnel

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command displays information about configured L2TPv3 Ethernet tunnels. These Ethernet tunnels are the L2TPv3 sessions setup between the local private L2 SAP and the far end device.

If this command is executed without any parameters, then a list of all configured Ethernet tunnels are displayed.

If this command is executed with a tunnel group name or a VC-ID, then a detailed view of the associated Ethernet tunnel is displayed.

Parameters

tunnel-group-name—

Specifies the configured tunnel group name used for the associated Ethernet tunnel.

vc-id—

Specifies the VC ID for the L2TPv3 Ethernet tunnel.

Values—

0 to 4294967295

Output

The following output is an example of L2TPv3 Ethernet tunnel information

Sample Output

A:Dut-A# show router 200 l2tp eth-tunnel

===============================================================================

L2TPv3 Ethernet Tunnel Summary

===============================================================================

Tunnel Group name VC ID

-------------------------------------------------------------------------------

v3-group-1 100

-------------------------------------------------------------------------------

No. of ethernet tunnels: 1

===============================================================================

A:Dut-A# show router 200 l2tp eth-tunnel group "v3-group-1"

===============================================================================

L2TPv3 Ethernet Tunnel Status

===============================================================================

Group Name : v3-group-1

VC ID : 100

Local Conn ID : 221122308

Ctrl Conn ID : 221118464

Matches Cfg : true

Down Reason : N/A

Reconnect Time (s) : N/A

Remaining Time (s) : N/A

SAP ID : tunnel-1.private:100

SAP Service ID : 100

-------------------------------------------------------------------------------

No. of ethernet tunnels: 1

===============================================================================

eth-tunnel

Syntax

eth-tunnel

eth-tunnel {aps | status}

eth-tunnel tunnel-index [path path-index] [detail]

Context

[Tree] (show eth-tunnel)

Full Contexts

show eth-tunnel

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Description

This command displays Ethernet tunnel information. Any data SAP missing a tag for a defined path has the EthTunTagMismatch flag generated. In the example provided below, SAP eth-tunnel-1:1 does not have the tag for path 2 configured. Therefore, it is operationally down with the reason indicated by the EthTunTagMismatch flag.

Parameters

aps—

Shows APS Ethernet tunnel information.

status—

Shows Ethernet tunnel status information.

tunnel-index—

Specifies the tunnel index.

Values—

1 to 1024

path-index—

Specifies the path index.

Values—

1 to 16

detail—

Displays detailed information.

Output

The following output is an example of Ethernet tunnel information, and Table 128 describes the output fields.

Sample Output: show eth-tunnel

*A:PE-E# show eth-tunnel

===============================================================================

Ethernet Tunnel Groups

===============================================================================

Tunnel Admin Oper Protection Active Paths

ID State State Type 1 2 3 4 5 6 7 8

-------------------------------------------------------------------------------

1 Up Up g.8031-1to1 x 2

2 Up Up g.8031-1to1 1 x

===============================================================================

*A:PE-E#

*A:PE-E# show eth-tunnel aps

===============================================================================

Ethernet Tunnel APS Groups

===============================================================================

Tunnel Admin Oper Working Path Path Active Rx PDU

ID State State Protecting Path State Path Tx PDU

-------------------------------------------------------------------------------

1 Up Up 1 - 1/1/2 1 Down No BF010100 ( SF)

2 - 2/1/2 1 Up Yes BF010100 ( SF)

2 Up Up 1 - 2/1/2 2 Up Yes 0F000000 ( NR)

2 - 1/1/2 2 Down No EF000000 (SF-P)

===============================================================================

*A:PE-E#

*A:PE-E# show eth-tunnel 1

===============================================================================

Ethernet Tunnel Group 1 Information

===============================================================================

Description : Eth Tunnel

IfIndex : 1476395009

Admin State : Up Oper State : Up

Protection Type : G.8031-1to1 Max Revert Time : 1 seconds

MAC Address : 00:1a:f0:44:d2:03 Time to Revert : N/A

Hold Down Time : 0 centiseconds

-------------------------------------------------------------------------------

Ethernet Tunnel Group APS Information

-------------------------------------------------------------------------------

APS PDU Rx : BF010100 ( SF) Switchover Time : 05/28/2009 10:10:17

APS PDU Tx : BF010100 ( SF)

Defect Status :

-------------------------------------------------------------------------------

Ethernet Tunnel Group Path Summary

-------------------------------------------------------------------------------

Path ID Member Control-Tag Precedence Admin/Oper Active Mgmt

-------------------------------------------------------------------------------

1 1/1/2 1 primary Up/Down No Yes

2 2/1/2 1 secondary Up/Up Yes No

===============================================================================

*A:PE-E#

*A:PE-E# show eth-tunnel 1 path 1

===============================================================================

Ethernet Tunnel Group 1 Path Information

===============================================================================

Description : (Not Specified)

Member : 1/1/2 Control-Tag : 1

Admin State : Up Oper State : Down

-------------------------------------------------------------------------------

Ethernet Tunnel Group Path APS Information

-------------------------------------------------------------------------------

Active Count : 2 Active Time : 0d 00:12:09

-------------------------------------------------------------------------------

Eth-Cfm Configuration Information

-------------------------------------------------------------------------------

Md-index : 1 Direction : Down

Ma-index : 1 Admin : Enabled

MepId : 1 CCM-Enable : Enabled

LowestDefectPri : macRemErrXcon HighestDefect : defRemoteCCM

Defect Flags : bDefRemoteCCM

Mac Address : 00:16:4d:c0:c1:ca ControlMep : True

===============================================================================

*A:PE-E#

*A:PE-E# show eth-tunnel 1 path 1 detail

===============================================================================

Ethernet Tunnel Group 1 Detailed Path Information

===============================================================================

Description : (Not Specified)

Member : 1/1/2 Control-Tag : 1

Admin State : Up Oper State : Down

-------------------------------------------------------------------------------

Ethernet Tunnel Group Path APS Information

-------------------------------------------------------------------------------

Active Count : 2 Active Time : 0d 00:12:09

-------------------------------------------------------------------------------

Eth-Cfm Configuration Information

-------------------------------------------------------------------------------

Md-index : 1 Direction : Down

Ma-index : 1 Admin : Enabled

MepId : 1 CCM-Enable : Enabled

LowestDefectPri : macRemErrXcon HighestDefect : defRemoteCCM

Defect Flags : bDefRemoteCCM

Mac Address : 00:16:4d:c0:c1:ca ControlMep : True

CcmLtmPriority : 7

CcmTx : 0 CcmSequenceErr : 0

Eth-Ais: : Disabled

Eth-Tst: : Disabled

LbRxReply : 0 LbRxBadOrder : 0

LbRxBadMsdu : 0 LbTxReply : 0

LbNextSequence : 1 LtNextSequence : 1

LtRxUnexplained : 0

===============================================================================

*A:PE-E#

Table 128: Output Fields: show eth-tunnel

Field	Description
Tunnel Id	Numeric value from 1 to 64.
Admin State	Up — The eth tunnel is administratively up. Down — The eth tunnel is administratively down.
Oper State	Up — The eth tunnel is operationally up. Down — The eth tunnel is operationally down.
Protection Type	Two options: g8031-1to1 — Two members are allowed, but only one of them is active at one point in time. loadsharing — Multiple members can be active at one point in time.
Active Paths	Only two paths are supported.

eth-tunnel

Syntax

eth-tunnel tunnel-index [clear]

Context

[Tree] (tools>dump eth-tunnel)

Full Contexts

tools dump eth-tunnel

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

Description

This command displays Ethernet tunnel information.

Parameters

tunnel-id—

Specifies the tunnel ID.

Values—

1 to 128

clear—

Clears statistics after reading.

Output

The following output is an example of Ethernet tunnel information.

Sample Output

*A:PE-E# tools dump eth-tunnel 1

TunnelId 1 (Up/Up), Port eth-tunnel-1 (Up/Up): type g8031-1to1

NumMems 2/2, Up/Dn 0/0, active 0x1, present 0x3 baseMemPort 1/1/2

memId 1 (P), port 1/1/2 (Up), tag 1.0(Up) status (Up/Up)

ccCnt-sf/ok 1/1 idx 0 tunId 1

memId 2 (S), port 2/1/2 (Up), tag 1.0(Up) status (Up/Up)

ccCnt-sf/ok 0/0 idx 1 tunId 1

TunId = 1, state = Running, Active = Work, Now = 000 00:16:48.140

revert = 1, ReqState = NR-NULL, Pdu(Tx/Rx): 0x0f0000/0x0f0000

Defects =

Running Timers = PduReTx

Work MemId = 1 (1/1/2:1.0), state = Ok, cc = 000 00:16:23.510U

ActiveCnt = 4, ActiveSeconds = 791

Protect MemId = 2 (2/1/2:1.0), state = Ok, cc = 000 00:09:47.560U

ActiveCnt = 3, ActiveSeconds = 308

DbgCnts: swoEv = 2, wMemSts = 2, pMemSts = 0

rxPdu (valid/Invalid) = 4/0, wSfClr = 1, pSfClr = 0, wtrExp = 1

cm = 0, cmClr = 0, pm = 0, pmClr = 0, nr = 0, nrClr = 0

Seq Event TxPdu RxPdu Dir Act Time

=== ======== ============ ============ ===== ==== ================

000 wMemSts 0xbf0101 wSF 0x0f0000 NR Tx--> Prot 000 00:16:12.450

001 RxPdu 0xbf0101 wSF 0x0f0101 NR Rx<-- Prot 000 00:16:12.450

002 RxPdu 0xbf0101 wSF 0xbf0101 wSF Rx<-- Prot 000 00:16:12.480

003 RxPdu 0xbf0101 wSF 0x0f0101 NR Rx<-- Prot 000 00:16:24.890

004 wSFClr 0x5f0101 WTR 0x0f0101 NR Tx--> Prot 000 00:16:25.030

005 WTR 0x0f0000 NR 0x0f0101 NR Tx--> Work 000 00:16:26.630

006 RxPdu 0x0f0000 NR 0x0f0000 NR Rx<-- Work 000 00:16:26.630

*A:PE-E#

7.30. ethernet

ethernet

Syntax

ethernet

Context

[Tree] (show>system ethernet)

Full Contexts

show system ethernet

Supported Platforms

All

Description

This command enables the context to display system-specific Ethernet information.

7.31. ethernet-segment

ethernet-segment

Syntax

ethernet-segment

ethernet-segment name name [all]

ethernet-segment name name evi [evi]

ethernet-segment name name isid [isid]

ethernet-segment name name virtual-ranges

Context

[Tree] (show>service>system>bgp-evpn ethernet-segment)

Full Contexts

show service system bgp-evpn ethernet-segment

Description

This command enables the context to display the Ethernet-Segment parameters.

Parameters

name—

Specifies the name of an Ethernet Segment for which to show information; maximum 32 characters are allowed.

all—

Displays all available information for the specified Ethernet Segment.

evi—

Displays information for the specified EVI.

Values—

1 to 65535

isid—

Displays information for the specified ISID.

Values—

1 to 16777215

virtual-ranges—

Displays the vc-id, qtag, s-tag, or c-tag per s-tag virtual ranges configured on the virtual Ethernet Segment.

Output

The following shows BGP EVPN Ethernet-Segment information.

Sample Output

*A:PE-2# show service system bgp-evpn ethernet-segment name "vES-23"

===============================================================================

Service Ethernet Segment

===============================================================================

Name : vES-23

Eth Seg Type : Virtual

Admin State : Enabled Oper State : Up

ESI : 01:23:23:23:23:23:23:23:23:23

Multi-homing : allActive Oper Multi-homing : allActive

ES SHG Label : 262141

Source BMAC LSB : 00-23

ES BMac Tbl Size : 8 ES BMac Entries : 0

Lag Id : 1

ES Activation Timer : 3 secs (default)

Svc Carving : manual Oper Svc Carving : manual

Cfg Range Type : lowest-pref

-------------------------------------------------------------------------------

DF Pref Election Information

-------------------------------------------------------------------------------

Preference Preference Last Admin Change Oper Pref Do No

Mode Value Value Preempt

-------------------------------------------------------------------------------

non-revertive 100 12/20/2016 09:21:08 100 Enabled

-------------------------------------------------------------------------------

EVI Ranges: <none>

ISID Ranges: <none>

===============================================================================

*A:PE-2# show service system bgp-evpn ethernet-segment name "vES-23" evi

===============================================================================

EVI Information

===============================================================================

EVI SvcId Actv Timer Rem DF

-------------------------------------------------------------------------------

5 5 0 yes

30 30 0 yes

-------------------------------------------------------------------------------

Number of entries: 2

===============================================================================

*A:PE-2# show service system bgp-evpn ethernet-segment name "vES-23" evi 5

===============================================================================

EVI DF and Candidate List

===============================================================================

EVI SvcId Actv Timer Rem DF DF Last Change

-------------------------------------------------------------------------------

5 5 0 yes 12/20/2016 09:21:24

===============================================================================

DF Candidates Time Added

-------------------------------------------------------------------------------

192.0.2.2 12/20/2016 09:21:21

192.0.2.3 12/20/2016 09:21:52

-------------------------------------------------------------------------------

Number of entries: 2

===============================================================================

*A:PE-2# show service system bgp-evpn ethernet-segment name "vES-23" virtual-ranges

===============================================================================

Q-Tag Ranges

===============================================================================

Q-Tag Start Q-Tag End Last Changed

-------------------------------------------------------------------------------

5 11 12/20/2016 09:21:08

30 30 12/20/2016 09:21:08

-------------------------------------------------------------------------------

Number of Entries: 2

===============================================================================

VC-Id Ranges

===============================================================================

VC-Id Start VC-Id End Last Changed

-------------------------------------------------------------------------------

No entries found

===============================================================================

S-Tag Ranges

===============================================================================

S-Tag Start S-Tag End Last Changed

-------------------------------------------------------------------------------

No entries found

===============================================================================

S-Tag C-Tag Ranges

===============================================================================

S-Tag Start C-Tag Start C-Tag End Last Changed

-------------------------------------------------------------------------------

No entries found

==============================================================================

===============================================================================

Vxlan Instance Service Ranges

===============================================================================

Svc Range Start Svc Range End Last Changed

-------------------------------------------------------------------------------

500 500 06/07/2017 15:10:59

-------------------------------------------------------------------------------

Number of Entries: 1

===============================================================================

ethernet-segment

Syntax

ethernet-segment name evi evi df

ethernet-segment name isid isid df

ethernet-segment name local-bias

Context

[Tree] (tools>dump>service>system>bgp-evpn ethernet-segment)

Full Contexts

tools dump service system bgp-evpn ethernet-segment

Supported Platforms

All

Description

This command shows the computed DF PE for a specified EVI or ISID when the evi or isid parameters are selected, respectively. When the local-bias parameter is used, the output lists the PEs that are in the candidate DF Election list for the ES, and whether local bias procedures are enabled on them.

The PE can only enable local bias procedures on up to three PEs that are attached to the same ES and use multihomed VXLAN services. If more than three PEs exists, the PEs are ordered by either lowest IP (if service-carving auto is used in the ES) or lowest preference (if preference-based service-carving is used) and only the top three PEs are considered for local bias.

Parameters

name—

Specifies the name of the Ethernet Segment, up to 32 characters.

evi—

Specifies the EVI.

Values—

1 to 65535

isid—

Specifies the ISID.

Values—

1 to 16777215

local-bias—

Specifies that output lists the PEs that are in the candidate DF Election list for the ES, and whether local bias procedures are enabled on them.

Output

The following is an example of Ethernet Segment information.

Sample Output

*A:PE2# tools dump service system bgp-evpn ethernet-segment "ESI-71" evi 1 df

[07/15/2015 21:52:08] Computed DF: 192.0.2.72 (Remote) (Boot Timer Expired: Yes)

*A:PE2# tools dump service system bgp-evpn ethernet-segment "ESI-71" isid 20001 df

[07/15/2015 21:52:21] Computed DF: 192.0.2.72 (Remote) (Boot Timer Expired: Yes)

A:Dut-E# /tools dump service system bgp-evpn ethernet-segment "ESI-71" local-bias

-------------------------------------------------------------------------------

[02/05/2019 20:54:20] Vxlan Local Bias Information

----------------------------------------------------------------------+--------

Peer | Enabled

----------------------------------------------------------------------+--------

220.0.0.1 | Yes

220.0.0.2 | Yes

220.0.0.3 | Yes

220.0.0.4 | No

----------------------------------------------------------------------+--------

*A:Dut-F# tools dump service system bgp-evpn ethernet-segment "eslag1" local-bias

-------------------------------------------------------------------------------

[04/22/2018 15:40:22] Vxlan Local Bias Information

----------------------------------------------------------------------+--------

Peer | Enabled

----------------------------------------------------------------------+--------

10.20.1.1 | Yes

10.20.1.2 | Yes

10.20.1.4 | Yes

10.20.1.5 | No

-------------------------------------------------------------------------------

7.32. etree

etree

Syntax

etree

Context

[Tree] (show>service>id etree)

Full Contexts

show service id etree

Supported Platforms

All

Description

This command displays the same information shown in the show service ID base context, with the addition of the role of each object in the VPLS E-Tree service.

The following labels identify the configuration of the SAPs and SDP bindings:

(L) indicates leaf-ac
(RL) indicates root-leaf-tag

Output

The following is an example of VPLS E-Tree information.

Sample Output

*A:PE-6# show service id 2005 etree

===============================================================================

Service Basic Information

===============================================================================

Service Id : 2005 Vpn Id : 0

Service Type : VPLS

Name : etree-2005

Description : (Not Specified)

Customer Id : 1 Creation Origin : manual

Last Status Change: 05/08/2018 09:49:54

Last Mgmt Change : 05/08/2018 09:51:09

Etree Mode : Enabled

Admin State : Up Oper State : Up

MTU : 1514

SAP Count : 2 SDP Bind Count : 1

Snd Flush on Fail : Disabled Host Conn Verify : Disabled

SHCV pol IPv4 : None

Propagate MacFlush: Disabled Per Svc Hashing : Disabled

Allow IP Intf Bind: Disabled

Fwd-IPv4-Mcast-To*: Disabled Fwd-IPv6-Mcast-To*: Disabled

Mcast IPv6 scope : mac-based

Def. Gateway IP : None

Def. Gateway MAC : None

Temp Flood Time : Disabled Temp Flood : Inactive

Temp Flood Chg Cnt: 0

SPI load-balance : Disabled

TEID load-balance : Disabled

Src Tep IP : N/A

Vxlan ECMP : Disabled

VSD Domain : <none>

-------------------------------------------------------------------------------

Service Access & Destination Points

-------------------------------------------------------------------------------

Identifier Type AdmMTU OprMTU Adm Opr

-------------------------------------------------------------------------------

sap:1/1/c1/1:2005 (L) q-tag 9000 9000 Up Up

sap:1/1/c1/1:2006 (RL) q-tag 9000 9000 Up Up

sdp:65:2005 (RL) S(192.0.2.5) Spok 0 8974 Up Down

-------------------------------------------------------------------------------

Legend: (L): Leaf-Ac, (RL): Root-Leaf-Tag

===============================================================================

* indicates that the corresponding row element may have been truncated.

7.33. eval-group-interface-template

eval-group-interface-template

Syntax

eval-group-interface-template name

Context

[Tree] (tools>perform>subscr-mgmt eval-group-interface-template)

Full Contexts

tools perform subscriber-mgmt eval-group-interface-template

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command reapplies the specified group-interface template to all the group interfaces that were created using this template. This command can be used after changing the group-interface template, because not all the changed parameters are automatically applied to the existing group interfaces.

This command reports the total number of group interfaces linked to the template, the number of group interfaces that were changed or did not require a change, and the number of group interfaces for which a change was attempted but failed.

Parameters

name—

Specifies a group-interface template name, up to 32 characters, as configured under configure subscriber-mgmt group-interface-template.

Output

The following is an example of the output information.

Sample Output

A:BNG-UPF# /tools perform subscriber-mgmt eval-group-interface-template "default"

Group interface instances:

- total submitted : 1

- changed : 1

- change failed : 0

7.34. eval-ipoe-session

eval-ipoe-session

Syntax

eval-ipoe-session [svc-id service-id] [sap sap-id] [mac mac-address] [circuit-id circuit-id] [remote-id remote-id] [subscriber sub-ident-string]

Context

[Tree] (tools>perform>subscr-mgmt eval-ipoe-session)

Full Contexts

tools perform subscriber-mgmt eval-ipoe-session

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command re-evaluates the mapping between authentication strings such as the SLA profile string and the actual profiles for the identified IPoE sessions.

Parameters

service-id—

Specifies an existing subscriber service ID.

Values—

1 to 2147483647

sap-id—

Specifies a SAP ID, up to 255 characters.

mac-address—

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.

circuit-id—

Specifies the circuit ID up to 127 characters.

remote-id—

Specifies that information that goes into the remote-id sub-option in the DHCP relay packet, up to 255 characters.

sub-ident-string —

Specifies an existing subscriber identification profile.

7.35. eval-lease-state

eval-lease-state

Syntax

eval-lease-state [svc-id service-id] [sap sap-id] [subscriber sub-ident-string] [ip ip-address] [mac mac-address]

Context

[Tree] (tools>perform>subscr-mgmt eval-lease-state)

Full Contexts

tools perform subscriber-mgmt eval-lease-state

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command evaluates lease state.

Parameters

sap-id—

Specifies the physical port identifier portion of the SAP definition.

ip-address—

Specifies the server’s IP address. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).

sub-ident-string—

Specifies the subscriber ID string, up to 32 characters.

service-id—

Specifies an existing service ID.

Values—

1 to 2147483647

7.36. eval-msap

eval-msap

Syntax

eval-msap {policy msap-policy-name | msap sap-id}

Context

[Tree] (tools>perform>subscr-mgmt eval-msap)

Full Contexts

tools perform subscriber-mgmt eval-msap

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command re-applies the managed SAP policy to the managed SAP identified by the specified sap-id or to all managed SAPs associated with the specified msap-policy name.

Parameters

msap-policy-name—

Specifies an existing MSAP policy. The MSAP policy is re-applied to all associated managed SAPs.

sap-id—

Specifies an MSAP SAP ID. The MSAP policy is re-applied to the specified MSAP.

Values—

[port-id | lag-id]:qtag1

[port-id | lag-id]:qtag1.qtag2

7.37. eval-ppp-session

eval-ppp-session

Syntax

eval-ppp-session [svc-id service-id] [user-name user-name] [sap sap-id] [ip ip-address] [subscriber sub-ident-string]

eval-ppp-session [svc-id service-id] [user-name user-name] [sap sap-id] mac mac-address [session-id session-id] [ip ip-address] [subscriber sub-ident-string]

Context

[Tree] (tools>perform>subscr-mgmt eval-ppp-session)

Full Contexts

tools perform subscriber-mgmt eval-ppp-session

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command evaluates PPP sessions.

Parameters

service-id—

Specifies an existing subscriber service ID.

Values—

1 to 2147483647

user-name—

Specifies the PPP user name up to 253 characters.

sap-id—

Specifies a SAP ID up to 255 characters.

ip-address—

Specifies the peer’s IP address.

sub-ident-string —

Specifies an existing subscriber identification profile.

mac-address—

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.

session-id—

Specifies information about the ID of the PPP session.

Values—

1 to 65535

7.38. eval-rates

eval-rates

Syntax

eval-rates

Context

[Tree] (tools>perform>subscr-mgmt>bonding eval-rates)

Full Contexts

tools perform subscriber-mgmt bonding eval-rates

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command evaluates all bonding contexts and recalculates all reference rates. This command can be useful in handling changes that are not automatically tracked, such as adapting a scheduler rate in a QoS policy.

7.39. eval-sap-template

eval-sap-template

Syntax

eval-sap-template name

Context

[Tree] (tools>perform>subscr-mgmt eval-sap-template)

Full Contexts

tools perform subscriber-mgmt eval-sap-template

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command reapplies the SAP template to all the SAPs that were created using this template. This command can be used after changing the SAP template because not all the changed parameters are automatically applied to the existing SAPs.

This command reports the total number of SAPs linked to the template, the number of SAPs that changed or did not require a change, and the number of SAPs for which a change was attempted but failed.

Parameters

name—

Specifies a SAP template name, up to 32 characters, as configured under configure subscriber-mgmt sap-template.

Output

The following is an example of the output information.

Sample Output

A:BNG-UPF# /tools perform subscriber-mgmt eval-sap-template "default"

Sap instances:

- total submitted : 1

- changed : 1

- change failed : 0

7.40. eval-slaac-host

eval-slaac-host

Syntax

eval-slaac-host [svc-id service-id] [sap sap-id] [subscriber sub-ident-string] [ipv6-address ipv6-prefix] [mac ieee-address]

Context

[Tree] (tools>perform>subscr-mgmt eval-slaac-host)

Full Contexts

tools perform subscriber-mgmt eval-slaac-host

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command evaluates the SLAAC host.

Parameters

service-id—

Specifies an existing subscriber service ID.

Values—

1 to 2147483647

sap-id—

Specifies a SAP ID, up to 255 characters.

sub-ident-string —

Specifies an existing subscriber identification profile.

ieee-address—

Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers.

ipv6-prefix—

Specifies an IPv6 prefix and prefix length.

Values—

ipv6-prefix	x:x:x:x:x:x:x:x (eight 16-bit pieces)
	x:x:x:x:x:x:d.d.d.d

7.41. evaluate-script

evaluate-script

Syntax

evaluate-script sap sap-id control-session acct-session-id action script-action [dynsvc-policy name] [param-string string]

Context

[Tree] (tools>perform>service>dynamic-services evaluate-script)

Full Contexts

tools perform service dynamic-services evaluate-script

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This tools command performs the execution of a dynamic service script action as if the corresponding RADIUS attributes were received from RADIUS. It is possible to setup, modify or teardown a dynamic service associated with the specified control channel.

Parameters

sap sap-id—

specifies the dynamic service SAP id.

control-session acct-session-id—

Specifies the accounting session id of the control channel associated with this dynamic service.

action script-action—

Specifies the requested action: setup, modify or teardown.

dynsvc-policy name—

Specifies the dynamic services policy to use for this action. Mandatory parameter for setup and modify actions. In case of a modify action, the dynamic services policy must be the same as the policy used at setup.

param-string string—

Specifies the dynamic service parameter list. Mandatory parameter for setup and modify actions.

evaluate-script

Syntax

evaluate-script domain-name [domain-name] type [type] action script-action [vni vni-id] [rt-i ext-community] [rt-e ext-community] [metadata metadata] policy python-policy

Context

[Tree] (tools>perform>service>vsd evaluate-script)

Full Contexts

tools perform service vsd evaluate-script

Supported Platforms

All

Description

The command enables the user to test their setup, and modify and tear down Python scripts in a lab environment without the need to be connected to a VSD. The successful execution of the command for action setup will create a VSD domain and the corresponding configuration, just as the system would do when the parameters are received from VSD.

Parameters

domain-name—

Specifies the VSD domain name. 32 characters maximum.

type—

Specifies the VSD domain type.

Values—

l2-domain, vrf-gre, vrf-vxlan, l2-domain-irb

script-action—

Specifies the action taken for Python scripts.

Values—

setup, modify, teardown

vni-id—

Specifies the VNI ID.

Values—

1 to 16777215

rt-i ext-community—

Specifies the internal route-target (RT-i).

Values—

target: {ip-addr:comm-val | 2byte-asnumber:ext-comm-val | 4byte-asnumber:comm-val}

ip-addr: a.b.c.d

comm-val: 0 to 65535

2byte-asnumber: 0 to 65535

ext-comm-val: 0 to 4294967295

4byte-asnumber: 0 to 4294967295

rt-e ext-community—

Specifies the external route-target (RT-e).

Values—

target: {ip-addr:comm-val | 2byte-asnumber:ext-comm-val | 4byte-asnumber:comm-val}

ip-addr: a.b.c.d

comm-val: 0 to 65535

2byte-asnumber: 0 to 65535

ext-comm-val: 0 to 4294967295

4byte-asnumber: 0 to 4294967295

metadata—

Specifies the opaque key=value pairs. 500 characters maximum.

python-policy—

Specifies the name of the Python script used to translate the VSD parameters into a configuration. 32 characters maximum.

Output

Sample Output

*A:PE1# tools perform service vsd evaluate-script domain-name "L2-DOMAIN-5" type l2-

domain action setup policy "py-l2" vni 64000 rt-i target:64000:64000 rt-

e target:64000:64000 metadata "rd=1:1, sap=1/1/10:3000"

Success

7.42. evc

evc

Syntax

evc [port-id [vlan vlan-id]]

Context

[Tree] (show>elmi evc)

Full Contexts

show elmi evc

Supported Platforms

All

Description

This command displays Ethernet Virtual Connections (EVC). No argument displays all the EVC on the service router. The port and VLAN arguments display information related to EVC associated with the port and VLAN.

Parameters

port-id —

Displays information related to the EVCs configured on the port.

Values—

slot/mda/port

vlan-id—

Specifies the VLAN Identifier of the EVC.

Values—

0 to 4094, *

Output

The following output is an example of E-LMI EVC information, and Table 129 describes the output fields.

Sample Output

*A:Dut-C# show elmi evc

===============================================================================

ELMI EVC Table

===============================================================================

Port Vlan Status Type Evc Id

-------------------------------------------------------------------------------

1/1/1 10 New-Act P2p EVC11110

1/1/3 30 New-Act P2p EVC11220

1/1/5 100 Act P2p EVC115100

1/1/5 200 Act P2p EVC115200

-------------------------------------------------------------------------------

Number of Evcs : 4

===============================================================================

*A:Dut-C#

A:Dut-C# show elmi evc 1/1/5

===============================================================================

ELMI EVC Table

===============================================================================

Port Vlan Status Type Evc Id

-------------------------------------------------------------------------------

1/1/5 100 Act P2p EVC115100

1/1/5 200 Act P2p EVC115200

-------------------------------------------------------------------------------

Number of Evcs : 2

===============================================================================

A:Dut-C#

*A:Dut-C# show elmi evc 1/1/5 vlan 100

===============================================================================

Evc Detailed Information

===============================================================================

Port : 1/1/5 vlanId : 100

Evc Status : Act Evc Type : P2p

Evc Identifier: EVC115100

===============================================================================

*A:Dut-C#

Table 129: Output Fields: show elmi evc

Field	Description
Port	Port identifier.
Vlan	Vlan identifier.
Status	New-Act — New and active. Act — Active.
Type	Connection type.
EVC Id	EVC identifier.

7.43. event-control

event-control

Syntax

event-control [application-id [event-name | event-number]]

event-control application-id event-name detail

Context

[Tree] (show>log event-control)

Full Contexts

show log event-control

Supported Platforms

All

Description

This command displays event control settings for events including whether the event is suppressed or generated and the severity level for the event.

If no options are specified all events, alarms and traps are listed.

Parameters

application-id—

Only displays event control for the specified application.

Default—

All applications.

The following are some sample applications:

Values—

application_assurance, aps, atm, auto_prov, bfd, bgp, bier, bmp, ccag, cflowd, chassis, cpmhwfilter, cpmhwqueue, debug, dhcp, dhcps, diameter, dot1x, dynsvc, efm_oam, elmi, ering, eth_cfm, etun, filter, fpe, gsmp, gmpls, gtp, gtungrp, icl, igh, igmp, igmp_snooping, ip, ipfix, ipsec, ipsec_cpm, isis, l2tp, lag, ldap, ldp, li, lldp, lmp, logger, macsec, mcac, mcpath, mc_redundancy, mgmt_core, mirror, mld, mld_snooping, mpls, mpls_tp, mpls_lmgr, mrp, msdp, nat, nge, ntp, oam, open_flow, ospf, pcap, pcep, pfcp, pim, im_snooping, port, ppp, pppoe, pppoe_clnt, profile, ptp, pxc, python, qos, radius, rib_api, rip, rip_ng, route_next_hop, route_policy, rpki, rsvp, security, sflow, snmp, sr_policy, stp, subscr_mgmt, sub_host_trk, svcmgr, system, tip, tls, user, user_db, video, vrrp, vrtr, wlan_gw, wpp

event-name—

Only displays event control for the named application event, up to 32 characters.

Default—

All events for the application.

event-number—

Only displays event control for the specified application event number.

Default—

All events for the application.

Output

The following is an example of event control information.

Table 130 describes the output fields for the event control.

Sample Output

The following is a sample output:

A:gal171# show log event-control

=======================================================================

Log Events

=======================================================================

Application

ID# Event Name P g/s Logged Dropped

-----------------------------------------------------------------------

BGP:

2001 bgpEstablished MI gen 0 0

2002 bgpBackwardTransition WA gen 0 0

2003 tBgpMaxPrefix90 WA gen 0 0

2004 tBgpMaxPrefix100 CR gen 0 0

L 2005 sendNotification WA gen 0 0

L 2006 receiveNotification WA gen 0 0

L 2007 bgpInterfaceDown WA gen 0 0

L 2008 bgpConnNoKA WA gen 0 0

L 2009 bgpConnNoOpenRcvd WA gen 0 0

L 2010 bgpRejectConnBadLocAddr WA gen 0 0

L 2011 bgpRemoteEndClosedConn WA gen 0 0

L 2012 bgpPeerNotFound WA gen 0 0

L 2013 bgpConnMgrTerminated WA gen 0 0

L 2014 bgpTerminated WA gen 0 0

L 2015 bgpNoMemoryPeer CR gen 0 0

L 2016 bgpVariableRangeViolation WA gen 0 0

L 2017 bgpCfgViol WA gen 0 0

CFLOWD:

2001 cflowdCreated MI gen 0 0

2002 cflowdCreateFailure MA gen 0 0

2003 cflowdDeleted MI gen 0 0

2004 cflowdStateChanged MI gen 0 0

2005 cflowdCleared MI gen 0 0

2006 cflowdFlowCreateFailure MI gen 0 0

2007 cflowdFlowFlushFailure MI gen 0 0

2008 cflowdFlowUnsuppProto MI sup 0 0

CCAG:

CHASSIS:

2001 cardFailure MA gen 0 0

2002 cardInserted MI gen 4 0

2003 cardRemoved MI gen 0 0

2004 cardWrong MI gen 0 0

2005 EnvTemperatureTooHigh MA gen 0 0

...

DEBUG:

L 2001 traceEvent MI gen 0 0

DOT1X:

FILTER:

2001 filterPBRPacketsDropped MI gen 0 0

IGMP:

2001 vRtrIgmpIfRxQueryVerMismatch WA gen 0 0

2002 vRtrIgmpIfCModeRxQueryMismatch WA gen 0 0

IGMP_SNOOPING:

IP:

L 2001 clearRTMError MI gen 0 0

L 2002 ipEtherBroadcast MI gen 0 0

L 2003 ipDuplicateAddress MI gen 0 0

L 2004 ipArpInfoOverwritten MI gen 0 0

L 2005 fibAddFailed MA gen 0 0

L 2006 qosNetworkPolicyMallocFailed MA gen 0 0

L 2007 ipArpBadInterface MI gen 0 0

L 2008 ipArpDuplicateIpAddress MI gen 0 0

L 2009 ipArpDuplicateMacAddress MI gen 0 0

ISIS:

2001 vRtrIsisDatabaseOverload WA gen 0 0

2002 vRtrIsisManualAddressDrops WA gen 0 0

2003 vRtrIsisCorruptedLSPDetected WA gen 0 0

2004 vRtrIsisMaxSeqExceedAttempt WA gen 0 0

2005 vRtrIsisIDLenMismatch WA gen 0 0

2006 vRtrIsisMaxAreaAddrsMismatch WA gen 0 0

....

USER:

L 2001 cli_user_login MI gen 2 0

L 2002 cli_user_logout MI gen 1 0

L 2003 cli_user_login_failed MI gen 0 0

L 2004 cli_user_login_max_attempts MI gen 0 0

L 2005 ftp_user_login MI gen 0 0

L 2006 ftp_user_logout MI gen 0 0

L 2007 ftp_user_login_failed MI gen 0 0

L 2008 ftp_user_login_max_attempts MI gen 0 0

L 2009 cli_user_io MI sup 0 48

L 2010 snmp_user_set MI sup 0 0

L 2011 cli_config_io MI gen 4357 0

VRRP:

2001 vrrpTrapNewMaster MI gen 0 0

2002 vrrpTrapAuthFailure MI gen 0 0

2003 tmnxVrrpIPListMismatch MI gen 0 0

2004 tmnxVrrpIPListMismatchClear MI gen 0 0

2005 tmnxVrrpMultipleOwners MI gen 0 0

2006 tmnxVrrpBecameBackup MI gen 0 0

L 2007 vrrpPacketDiscarded MI gen 0 0

VRTR:

2001 tmnxVRtrMidRouteTCA MI gen 0 0

2002 tmnxVRtrHighRouteTCA MI gen 0 0

2003 tmnxVRtrHighRouteCleared MI gen 0 0

2004 tmnxVRtrIllegalLabelTCA MA gen 0 0

2005 tmnxVRtrMcastMidRouteTCA MI gen 0 0

2006 tmnxVRtrMcastMaxRoutesTCA MI gen 0 0

2007 tmnxVRtrMcastMaxRoutesCleared MI gen 0 0

2008 tmnxVRtrMaxArpEntriesTCA MA gen 0 0

2009 tmnxVRtrMaxArpEntriesCleared MI gen 0 0

2011 tmnxVRtrMaxRoutes MI gen 0 0

=======================================================================

A:ALA-1#

A:ALA-1# show log event-control ospf

=======================================================================

Log Events

=======================================================================

Application

ID# Event Name P g/s Logged Dropped

-----------------------------------------------------------------------

2001 ospfVirtIfStateChange WA gen 0 0

2002 ospfNbrStateChange WA gen 1 0

2003 ospfVirtNbrStateChange WA gen 0 0

2004 ospfIfConfigError WA gen 0 0

2005 ospfVirtIfConfigError WA gen 0 0

2006 ospfIfAuthFailure WA gen 0 0

2007 ospfVirtIfAuthFailure WA gen 0 0

2008 ospfIfRxBadPacket WA gen 0 0

2009 ospfVirtIfRxBadPacket WA gen 0 0

2010 ospfTxRetransmit WA sup 0 0

2011 ospfVirtIfTxRetransmit WA sup 0 0

2012 ospfOriginateLsa WA sup 0 404

2013 ospfMaxAgeLsa WA gen 3 0

2014 ospfLsdbOverflow WA gen 0 0

2015 ospfLsdbApproachingOverflow WA gen 0 0

2016 ospfIfStateChange WA gen 2 0

2017 ospfNssaTranslatorStatusChange WA gen 0 0

2018 vRtrOspfSpfRunsStopped WA gen 0 0

2019 vRtrOspfSpfRunsRestarted WA gen 0 0

2020 vRtrOspfOverloadEntered WA gen 1 0

2021 vRtrOspfOverloadExited WA gen 0 0

2022 ospfRestartStatusChange WA gen 0 0

2023 ospfNbrRestartHelperStatusChange WA gen 0 0

2024 ospfVirtNbrRestartHelperStsChg WA gen 0 0

=======================================================================

A:ALA-1#

A:ALA-1# show log event-control ospf ospfVirtIfStateChange

=======================================================================

Log Events

=======================================================================

Application

ID# Event Name P g/s Logged Dropped

-----------------------------------------------------------------------

2001 ospfVirtIfStateChange WA gen 0 0

=======================================================================

A:ALA-1#

A:dut-c# show log event-control "BGP" tBgpMaxNgPfxLmtThresholdReached detail

===============================================================================

Log event "tBgpMaxNgPfxLmtThresholdReached"

===============================================================================

Severity : major

Generated : true

Count : 0

Drop count : 1

Throttle : false

Specific throttle : false

Specific throttle limit : 0

Specific throttle interval (s) : 0

Specific throttle by default : false

Specific throttle limit default : 0

Specific throttle interval default(s) : 0

Repeat : false

A:node-2# show log event-control "mgmt_core"

=======================================================================

Log Events

=======================================================================

Application

ID# Event Name P g/s Logged Dropped

-----------------------------------------------------------------------

L 2001 mdConfigChange MI sup 0 197

L 2002 mdOcConfigChange MI sup 0 0

L 2003 mdBofConfigChange MI sup 0 23

L 2004 mdDebugConfigChange MI sup 0 0

=======================================================================

Table 130: Event-Control Output Field Descriptions

Label	Description
Application	The application name.
ID#	The event ID number within the application. L ID# An “L” in front of an ID represents event types that do not generate an associated SNMP notification. Most events do generate a notification, only the exceptions are marked with a preceding “L”.
Event Name	The event name.
P	CL — The event has a cleared severity or priority. CR — The event has critical severity or priority. IN — The event has indeterminate severity or priority. MA — The event has major severity or priority. MI — The event has minor severity or priority. WA — The event has warning severity or priority.
g/s	gen — The event will be generated or logged by event control. sup — The event will be suppressed or dropped by event control. thr — Specifies that throttling is enabled.
Logged	The number of events logged or generated.
Dropped	The number of events dropped/suppressed.
Severity	The severity level of the event (cleared, indeterminate, critical, major, minor, or warning).
Generated	Indicates whether the log event is enabled (true) or suppressed (false).
Count	The number of events logged or generated.
Drop count	The number of events dropped/suppressed.
Throttle	Indicates whether the event is subject to global throttling (true or false).
Specific throttle	Indicates whether the event is subject to specific per event throttling (true or false).
Specific throttle limit	The configured number of events per interval for specific throttling.
Specific throttle interval (s)	The configured interval over which the specific throttling limit is applied.
Specific throttle by default	Indicates whether the specific throttling is enabled or not when it has not been explicitly configured.
Specific throttle limit default	The default number of events per-interval for specific throttling of this event.
Specific throttle interval default (s)	The default interval over which the specific default throttling limit is applied.
Repeat	Specifies that the log event should be repeated every minute until the underlying condition is cleared.

7.44. event-handling

event-handling

Syntax

event-handling

Context

[Tree] (show>log event-handling)

Full Contexts

show log event-handling

Supported Platforms

All

Description

This command enables the context to display Event Handling System (EHS) information.

event-handling

Syntax

event-handling

Context

[Tree] (clear>log event-handling)

Full Contexts

clear log event-handling

Supported Platforms

All

Description

This command enables the context to clear Event Handling System (EHS) information.

7.45. event-log

event-log

Syntax

event-log event-log-name syslog

Context

[Tree] (show>app-assure>group event-log)

Full Contexts

show application-assurance group event-log

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Description

This command displays event log information.

Parameters

event-log-name—

Specifies the event log name, up to 32 characters.

syslog—

Specifies to display syslog information.

Output

The following is a sample output displaying event log information:

Sample Output

*A:Dut-B# show application-assurance group 1:1 event-log "sampleLog" syslog

===============================================================================

Application Assurance Group 1:1 Event Log "sampleLog" Syslog

===============================================================================

Event-log admin status : down

Description : (Not Specified)

Address : (Not Specified)

Port : 514

VLAN ID : (Not Specified)

Facility : local7

Severity : info

-------------------------------------------------------------------------------

ISA Events Sent Events Failed

-------------------------------------------------------------------------------

1/2 0 0

2/1 0 0

2/2 0 0

===============================================================================

*A:Dut-B#

event-log

Syntax

event-log log-event url file-url

event-log log-event isa mda-id [url file-url]

Context

[Tree] (tools>dump>app-assure>group event-log)

Full Contexts

tools dump application-assurance group event-log

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

Description

This command displays application-assurance event-log information.

7.46. event-parameters

event-parameters

Syntax

event-parameters [application-id [event-name | event-number]]

Context

[Tree] (show>log event-parameters)

Full Contexts

show log event-parameters

Supported Platforms

All

Description

This command displays an event's (or all events) common parameters and specific parameters. This allows a user to know what parameters can be passed from a triggering event to the triggered EHS script.

Parameters

application-id—

Displays event parameters for the specified application.

Default—

All applications.

The following are some sample applications:

Values—

application_assurance, aps, atm, bfd, bgp, calltrace, ccag, cflowd, chassis, cpmhwfilter, cpmhwqueue, debug, dhcp, dhcps, diameter, dot1x, dynsvc, efm_oam, elmi, ering, eth_cfm, etun, filter, fpe, gsmp, gmpls, gtungrp, icl, igh, igmp, igmp_snooping, ip, ipfix, ipsec, ipsec_cpm, isis, l2tp, lag, ldap, ldp, li, lldp, lmp, logger, mcac, mcpath, mc_redundancy, mirror, mld, mld_snooping, mpls, mpls_tp, mrp, msdp, nat, ntp, oam, open_flow, ospf, pcep, pim, pim_snooping, port, ppp, pppoe, ptp, pxc, python, qos, radius, rip, rip_ng, route_next_hop, route_policy, rpki, rsvp, security, sflow, snmp, stp, subscr_mgmt, sub_host_trk, svcmgr, system, tip, tls, user, user_db, video, vrrp, vrtr, wlan_gw, wpp

event-name—

Displays event parameters for the named application event up to 32 characters in length.

Default—

All events for the application.

event-number—

Displays event parameters for the specified application event number.

Default—

All events for the application.

Values—

0 — 4294967295

Output

The following is an example of log event parameter information.

Sample output

# show log event-parameters "oam" 2001

=======================================================================

Common Event Parameters

appid

name

eventid

severity

subject

gentime

Event Specific Parameters

tmnxOamPingCtlOwnerIndex

tmnxOamPingCtlTestIndex

tmnxOamPingCtlTgtAddrType

tmnxOamPingCtlTgtAddress

tmnxOamPingResultsTestRunIndex

tmnxOamPingResultsOperStatus

tmnxOamPingResultsMinRtt

tmnxOamPingResultsMaxRtt

tmnxOamPingResultsAverageRtt

tmnxOamPingResultsRttSumOfSquares

tmnxOamPingResultsRttOFSumSquares

tmnxOamPingResultsMtuResponseSize

tmnxOamPingResultsSvcPing

tmnxOamPingResultsProbeResponses

tmnxOamPingResultsSentProbes

tmnxOamPingResultsLastGoodProbe

tmnxOamPingCtlTestMode

tmnxOamPingHistoryIndex

=======================================================================

7.47. evpn

evpn

Syntax

evpn

Context

[Tree] (tools>dump>service evpn)

Full Contexts

tools dump service evpn

Supported Platforms

All

Description

This command enables the context for the global evpn parameters.

7.48. evpn mac-dup-detect

evpn mac-dup-detect

Syntax

evpn mac-dup-detect {ieee-address | all}

Context

[Tree] (clear>service>id evpn mac-dup-detect)

Full Contexts

clear service id evpn mac-dup-detect

Description

This command clears a duplicate MAC and restarts the MAC duplication process. It also clears black-hole MACs.

Parameters

ieee-address —

Specifies the MAC address.

all —

Specifies that the clear command applies to all duplicate MACs.

7.49. evpn usage

evpn usage

Syntax

usage

Context

[Tree] (tools>dump>service>id evpn usage)

Full Contexts

tools dump service id evpn usage

Description

This command shows the maximum number of EVPN-tunnel interface IP next hops per R-VPLS as well as the current usage for a specified R-VPLS service.

Output

The following is an example of tools dump EVPN usage information.

Sample Output

*A:PE71# tools dump service id 504 evpn usage

Evpn Tunnel Interface IP Next Hop: 1/8189

7.50. evpn-mpls

evpn-mpls

Syntax

evpn-mpls [tep-ip-address]

Context

[Tree] (show>service evpn-mpls)

Full Contexts

show service evpn-mpls

Supported Platforms

All

Description

This command shows the remote EVPN-MPLS tunnel endpoints in the system.

Parameters

tep-ip-address—

Specifies the IP address of a tunnel endpoint.

Values—

a.b.c.d

Output

Sample Output

*A:PE70(4)# show service evpn-mpls

===============================================================================

EVPN MPLS Tunnel Endpoints

===============================================================================

EvpnMplsTEP Address EVPN-MPLS Dest ES Dest ES BMac Dest

-------------------------------------------------------------------------------

192.0.2.69 3 1 1

192.0.2.71 2 0 0

192.0.2.72 3 1 1

192.0.2.73 2 1 0

192.0.2.254 1 0 0

-------------------------------------------------------------------------------

Number of EvpnMpls Tunnel Endpoints: 5

-------------------------------------------------------------------------------

===============================================================================

*A:PE70(4)# show service evpn-mpls

192.0.2.69 192.0.2.71 192.0.2.72 192.0.2.73 192.0.2.254

*A:PE70(4)# show service evpn-mpls 192.0.2.69

===============================================================================

BGP EVPN-MPLS Dest

===============================================================================

Service Id Egr Label

-------------------------------------------------------------------------------

1 262140

1 262141

20000 262138

-------------------------------------------------------------------------------

===============================================================================

BGP EVPN-MPLS Ethernet Segment Dest

===============================================================================

Service Id Eth Seg Id Egr Label

-------------------------------------------------------------------------------

1 01:00:00:00:00:71:00:00:00:01 262141

-------------------------------------------------------------------------------

===============================================================================

BGP EVPN-MPLS ES BMac Dest

===============================================================================

Service Id ES BMac Egr Label

-------------------------------------------------------------------------------

20000 00:00:00:00:71:71 262138

-------------------------------------------------------------------------------

===============================================================================

evpn-mpls

Syntax

evpn-mpls

evpn-mpls esi esi

evpn-mpls es-bmac ieee-address

Context

[Tree] (show>service>id evpn-mpls)

Full Contexts

show service id evpn-mpls

Supported Platforms

All

Description

This command displays the existing EVPN-MPLS destinations for a specified service and all related information. The command allows filtering based on esi (for EVPN multi-homing) and es-bmac (for PBB-EVPN multi-homing) to display the EVPN-MPLS destinations associated to an Ethernet Segment Identifier (ESI).

Parameters

esi—

Specifies a 10-byte ESI by which to filter the displayed information. For example, ESI-0 | ESI-MAX or 00-11-22-33-44-55-66-77-88-99 with any of these separators ('-',':',' ')

ieee-address—

Specifies a 48-bit MAC address for which to display information. The parameter is entered in the form xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx, where xx represents a hexadecimal number.

Output

Sample Output

A:PE3# show service id 20000 evpn-mpls es-bmac 00:00:00:00:71:71

===============================================================================

BGP EVPN-MPLS ES BMAC Dest

===============================================================================

vBmacAddr Num. Macs Last Change

-------------------------------------------------------------------------------

00:00:00:00:71:71 1 07/15/2015 19:44:10

===============================================================================

BGP EVPN-MPLS ES BMAC Dest TEP Info

===============================================================================

TEP Address Egr Label Last Change

Transport

-------------------------------------------------------------------------------

192.0.2.69 262138 07/15/2015 19:44:10

ldp

-------------------------------------------------------------------------------

Number of entries : 1

-------------------------------------------------------------------------------

===============================================================================

*A:Dut-B> show service id 1001 evpn-mpls

===============================================================================

BGP EVPN-MPLS Dest

===============================================================================

TEP Address Egr Label Num. MACs Mcast Last Change

Transport:Tnl Sup BCast Domain

-------------------------------------------------------------------------------

3ffe::a14:103 524259 1 bum 10/03/2019 18:11:35

sr- No

policy:917528

-------------------------------------------------------------------------------

Number of entries : 1

-------------------------------------------------------------------------------

===============================================================================

*A:PE-2# show service id 2001 evpn-mpls

===============================================================================

BGP EVPN-MPLS Dest

===============================================================================

TEP Address Egr Label Num. MACs Mcast Last Change

Transport:Tnl Sup BCast Domain

-------------------------------------------------------------------------------

192.0.2.3 524266 0 m 01/14/2020 16:22:27

ldp:65538 Yes

192.0.2.3 524267 0 bum 01/14/2020 16:22:27

ldp:65538 No

192.0.2.3 524268 1 none 01/14/2020 16:22:27

ldp:65538 No

192.0.2.4 524269 0 m 01/14/2020 16:23:58

ldp:65543 Yes

-------------------------------------------------------------------------------

Number of entries : 4

-------------------------------------------------------------------------------

===============================================================================

BGP EVPN-MPLS Ethernet Segment Dest

===============================================================================

Eth SegId Num. Macs Last Change

-------------------------------------------------------------------------------

No Matching Entries

===============================================================================

BGP EVPN-MPLS ES BMAC Dest

===============================================================================

ES BMAC Addr Last Change

-------------------------------------------------------------------------------

No Matching Entries

===============================================================================

*A:PE-1# show service id 2 evpn-mpls esi 00:10:00:00:00:00:00:00:00:00

========================================================

BGP EVPN-MPLS Ethernet Segment Dest

========================================================

Eth SegId Last Change

--------------------------------------------------------

00:10:00:00:00:00:00:00:00:00 01/03/2002 04:43:25

========================================================

===============================================================================

BGP EVPN-MPLS Dest TEP Info

===============================================================================

TEP Address Egr Label Last Change

Transport:Tnl-Id

-------------------------------------------------------------------------------

10.0.0.48 24007 01/03/2002 04:43:25

isis:524734

10.0.0.132 75 01/03/2002 04:43:25

isis:524735

-------------------------------------------------------------------------------

Number of entries : 2

-------------------------------------------------------------------------------

===============================================================================

Table 131 describes the EVPN-MPLS output fields.

Table 131: Show EVPN-MPLS Information Fields

Label	Description
vBmacAddr	Displays the vBmac address.
Num. Macs	Displays the number of MACs.
Last Change	Indicates the time of the most recent state changes.
TEP Address	Displays the TEP address.
Egr Label	Displays the egress label.
Transport	Displays the transport type.
Number of entries	Indicates the number of entries.
Eth SegId	Displays the Ethernet Segment ID
Transport:Tnl-Id	Displays the tunnel type and tunnel ID of the EVPN-MPLS entry.
Transport:Tnl	Displays the transport tunnel.
Num. MAC	Displays the number of MACs.
Mcast	Displays the multicast information.
Sup BCast Domain	Displays the Sup BCast Domain.

7.51. evpn-proxy-db

evpn-proxy-db

Syntax

evpn-proxy-db [detail]

evpn-proxy-db [group grp-ip-address]

Context

[Tree] (show>service>id>igmp-snooping evpn-proxy-db)

[Tree] (show>service>id>mld-snooping evpn-proxy-db)

Full Contexts

show service id igmp-snooping evpn-proxy-db

show service id mld-snooping evpn-proxy-db

Supported Platforms

All

Description

This command displays the EVPN proxy database that is created when config>service>vpls>igmp/mld-snooping>evpn-proxy is enabled in the service. The EVPN proxy database is populated with local reports received on SAP or SDP binds but not with the received SMET routes. The output shows the IGMP and MLD versions of the database entries that are conveyed in the SMET routes advertised for the entries.

Parameters

grp-ip-address—

Specifies the group IP address, in dotted decimal notation.

detail—

Specifies detailed information for the EVPN proxy database.

Output

The following is an example of EVPN proxy database information.

Sample Output

A:PE-2# show service id 4000 igmp-snooping evpn-proxy-db

===============================================================================

IGMP Snooping Evpn-Proxy-reporting DB for service 4000

===============================================================================

Group Address Mode Up Time Num Sources V1 V2 V3

-------------------------------------------------------------------------------

239.0.0.1 exclude 0d 00:53:55 0 V3

239.0.0.2 include 0d 00:53:55 1 V3

-------------------------------------------------------------------------------

Number of groups: 2

===============================================================================

Table 132 describes EVPN proxy output fields.

Table 132: EVPN Proxy Field Descriptions

Field	Description
Group Address	Group IP address
Mode	IGMPv3 or MLDv2 mode
Up Time	Time that the group is added
Num Sources	Number of sources
V1	IGMP/MLD version of the database
V2	IGMP/MLD version of the database
V3	IGMP version of the database

7.52. excessive-sources

excessive-sources

Syntax

excessive-sources [service-id service-id sap-id sap-id]

Context

[Tree] (show>system>security>cpu-protection excessive-sources)

Full Contexts

show system security cpu-protection excessive-sources

Supported Platforms

7450 ESS, 7750 SR-14s, 7750 SR-7/12/12e, 7750 SR-7s, 7950 XRS

Description

This command displays sources exceeding their per-source rate limit.

Parameters

service-id —

Displays information for services exceeding their per-source rate limit.

sap-id—

Displays information for SAPs exceeding their per-source rate limit.

excessive-sources

Syntax

excessive-sources

Context

[Tree] (clear>cpu-protection excessive-sources)

Full Contexts

clear cpu-protection excessive-sources

Supported Platforms

7450 ESS, 7750 SR-14s, 7750 SR-7/12/12e, 7750 SR-7s, 7950 XRS

Description

This command clears the records of sources exceeding their per-source rate limit.

7.53. exercise

exercise

Syntax

exercise aps-id {protect | working}

Context

[Tree] (tools>perform>aps exercise)

Full Contexts

tools perform aps exercise

Supported Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e

Description

This command performs an exercise request on the protection or working circuit.

Parameters

aps-id—

Specifies the APS ID.

Values—

aps-id	aps-group-id
	aps	keyword
	group-id	1 to 128

protect—

This command clears a physical port that is acting as the protection circuit for the APS group.

working—

This command clears a physical port that is acting as the working circuit for this APS group.

7.54. expand-wildcard-path

expand-wildcard-path

Syntax

expand-wildcard-path path

Context

[Tree] (tools>dump>system>telemetry expand-wildcard-path)

Full Contexts

tools dump system telemetry expand-wildcard-path

Supported Platforms

All

Description

This command expands XML Paths (XPaths) to include multiple wildcards.

Parameters

path —

Specifies the XPath that contains the wildcards.

Output

Sample Output

# tools dump system telemetry expand-wildcard-path "/state/card/.../oper-state"

=======================================================================

Expanded paths

=======================================================================

/state/card[slot-number=*]/hardware-data/oper-state

/state/card[slot-number=*]/mda[mda-slot=*]/hardware-data/oper-state

/state/card[slot-number=*]/mda[mda-slot=*]/flex[group-index=*]/oper-state

=======================================================================

7.55. explicit-subscriber-map

explicit-subscriber-map

Syntax

explicit-subscriber-map

Context

[Tree] (show>subscr-mgmt explicit-subscriber-map)

Full Contexts

show subscriber-mgmt explicit-subscriber-map

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

Description

This command displays explicit subscriber mappings.

Output

The following is an example of subscriber management explicit subscriber map information.

Sample Output

B:Dut-A>show>subscr-mgmt# explicit-subscriber-map

===============================================================================

Explicit Subscriber Map

===============================================================================

Key Sub profile

SLA profile

-------------------------------------------------------------------------------

sub_ident_A_1 sub_prof80

sla_prof80

-------------------------------------------------------------------------------

Number of Explicit Subscriber Mappings : 1

===============================================================================

B:Dut-A>show>subscr-mgmt#

Table 133 describes subscriber management explicit subscriber map output fields.

Table 133: Explicit Subscriber Map Field Descriptions

Field	Description
Key	The explicit subscriber mapping
Number of Explicit Subscriber Mappings	The number of configured explicit subscriber mappings

7.56. export

export

Syntax

export

Context

[Tree] (clear>router>isis export)

Full Contexts

clear router isis export

Supported Platforms

All

Description

This command re-evaluates route policies participating in the export mechanism, either as importers or exporters of routes.

export

Syntax

export

Context

[Tree] (clear>router>ospf export)

[Tree] (clear>router>ospf3 export)

Full Contexts

clear router ospf export

clear router ospf3 export

Supported Platforms

All

Description

This command re-evaluates all effective export policies.

export

Syntax

export

Context

[Tree] (clear>router>rip export)

Full Contexts

clear router rip export

Supported Platforms

All

Description

This command re-evaluates RIP export policies.

export

Syntax

export

Context

[Tree] (clear>router>ripng export)

Full Contexts

clear router ripng export

Supported Platforms

All

Description

This command re-evaluates RIPng export policies.

7.57. extranet-interface

extranet-interface

Syntax

extranet-interface

Context

[Tree] (show>router>pim extranet-interface)

Full Contexts

show router pim extranet-interface

Supported Platforms

All

Description

This command displays extranet interface information.

7. e Commands

7.1. ecmp

ecmp

Syntax

Context

Full Contexts

Supported Platforms

Description

Output

Table 119: ECMP Fields

7.2. edit-ipoe-session

edit-ipoe-session

Syntax

Context

Full Contexts

Supported Platforms

Description

7.3. edit-lease-state

edit-lease-state

Syntax

Context

Full Contexts

Supported Platforms

Description

Parameters

7.4. edit-ppp-session

edit-ppp-session

Syntax

Context

Full Contexts

Supported Platforms

Description

Parameters

7.5. edit-slaac-host

edit-slaac-host

Syntax

Context

Full Contexts

Supported Platforms

Description

Parameters

7.6. efm-oam

efm-oam

Syntax

Context

Full Contexts

Supported Platforms

Description

Output

7.7. egress-label

egress-label

Syntax

Context

Full Contexts

Supported Platforms

Description

Parameters

Output

Table 120: Show Service Egress Command Output Fields

7.8. egress-pbr

egress-pbr

Syntax

Context

Full Contexts

Supported Platforms

Description

Parameters

Output

7.9. egress-statistics

egress-statistics

Syntax

Context

Full Contexts

Supported Platforms

Description

Parameters

Output

Table 121: Show Egress Statistics Field Descriptions

egress-statistics

Syntax