BGP Label Route Resolution Using SR-TE LSP

The user can enable SR-TE LSP, as programmed in TTM, for resolving the next-hop of a BGP IPv4 or IPv6 (6PE) label route by enabling the following BGP transport tunnel command:

config>router>bgp>next-hop-res>
        — labeled-routes
            — transport-tunnel
                — [no] family {label-ipv4 | label-ipv6 | vpn}
                    — resolution {any | disabled | filter}
                    — resolution-filter
                        — [no] sr-te
                    — exit
                — exit
            — exit