Configure the adjacency hold timer for the LFA or remote LFA backup next-hop of an adjacency SID.
Use the following syntax to configure the length of the interval during which LTN or ILM records of an adjacency SID are kept:
config>router>ospf>segment-routing>adj-sid-hold seconds[1..300, default 15]
— config>router>isis>segment-routing>adj-sid-hold seconds[1..300, default 15]
adj-sid-hold 15
— no entropy-label-capability
— prefix-sid-range global
— no tunnel-table-pref
— no tunnel-mtu
— no backup-node-sid
— no shutdown
While protection is enabled globally for all node SIDs and local adjacency SIDs when the user enables the loopfree-alternates option in ISIS or OSPF at the LER and LSR, there are applications where the user wants traffic to never divert from the strict hop computed by CSPF for a SR-TE LSP. In that case, use the following syntax to disable protection for all adjacency SIDs formed over a given network IP interface:
config>router>ospf>area>if>no sid-protection
— config>router>isis>if>no sid-protection
node-sid index 194
— no sid-protection
— no shutdown