The user can forward packets of a static route to an indirect next-hop over an SR-TE LSP programmed in TTM by configuring the following static route tunnel binding command:
config>router>static-route-entry {ip-prefix/prefix-length} [mcast] indirect {ip-address} tunnel-next-hop
— resolution {any | disabled | filter}
— resolution-filter
— [no] sr-te
— [no] [lsp name1]
— [no] [lsp name2]
— .
— .
— [no] [lsp name-N]
— exit
— [no] disallow-igp
— exit
— exit
The user can select the sr-te tunnel type and either specify a list of SR-TE LSP names to use to reach the indirect next-hop of this static route or have the SR-TE LSPs automatically select the indirect next-hop in TTM.