18. q Commands

18.1. qos

qos

Syntax

qos

Context

[Tree] (clear qos)

Full Contexts

clear qos

Supported Platforms

All

Description

Commands in this context clear QoS statistics.

qos

Syntax

qos

Context

[Tree] (show qos)

Full Contexts

show qos

Supported Platforms

All

Description

Commands in this context display QoS information.

qos

Syntax

qos

Context

[Tree] (tools>dump qos)

Full Contexts

tools dump qos

Supported Platforms

All

Description

Commands in this context dump QoS information.

18.2. quarantine

quarantine

Syntax

quarantine

Context

[Tree] (tools>perform>app-assure>group>aa-sub quarantine)

Full Contexts

tools perform application-assurance group aa-sub quarantine

Description

This command places the specified AA subscriber into the quarantine state. If the specified AA subscriber is already in a quarantined state, an error message is generated. If the quarantine table is full, the command generates an error message when the user tries to manually quarantine an AA subscriber. The user can manually clear-quarantine any quarantined AA subscriber to make space for the new AA subscriber. When this command is successfully executed, an SNMP trap is raised indicating that the AA-subscriber is now quarantined.

18.3. querier

querier

Syntax

querier

Context

[Tree] (show>service>id>mld-snooping querier)

Full Contexts

show service id mld-snooping querier

Supported Platforms

All

Description

This command displays information about the current querier.

Output

The following output is an example of service MLD snooping querier information.

Sample Output

*A:rbae_C# show service id 1 mld-snooping querier

===============================================================================

MLD Snooping Querier info for service 1

===============================================================================

Sap Id : 2/1/5

IP Address : FE80:db8:12

Expires : 11s

Up Time : 0d 00:13:35

Version : 2

General Query Interval : 10s

Query Response Interval : 1.0s

Robust Count : 2

===============================================================================

*A:rbae_C#

querier

Syntax

querier

Context

[Tree] (show>service>id>igmp-snooping querier)

Full Contexts

show service id igmp-snooping querier

Supported Platforms

All

Description

This command displays information on the IGMP snooping queriers for the VPLS service.

Output

The following output displays an example of IGMP snooping querier information.

Sample Output

A:ALA-1>show>service>id>snooping# querier

===============================================================================

IGMP Snooping Querier info for service 10

===============================================================================

Sap Id : 1/1/1

IP Address : 10.10.10.1

Expires : 6s

Up Time : 0d 00:56:50

Version : 3

General Query Interval : 5s

Query Response Interval : 2.0s

Robust Count : 2

===============================================================================

A:ALA-1>show>service>id>snooping#

querier

Syntax

querier

Context

[Tree] (show>service>id>igmp-snooping querier)

Full Contexts

show service id igmp-snooping querier

Supported Platforms

All

Description

This command displays information on the IGMP snooping queriers for the VPLS service.

Output

Sample Output

*A:ALA-1>show>service>id>snooping# querier

===============================================================================

IGMP Snooping Querier info for service 10

===============================================================================

Sap Id : 1/1/1

IP Address : 10.10.10.1

Expires : 6s

Up Time : 0d 00:56:50

Version : 3

General Query Interval : 5s

Query Response Interval : 2.0s

Robust Count : 2

===============================================================================

*A:ALA-1>show>service>id>snooping#

Table 369 describes the show output fields.

Table 369: IGMP Snooping Queriers Fields

Label	Description
SAP Id	Specifies the SAP ID of the service.
IP address	Specifies the IP address of the querier.
Expires	The time left, in seconds, that the query will expire.
Up time	The length of time the query has been enabled.
Version	The configured version of IGMP.
General Query Interval	The frequency at which host-query packets are transmitted.
Query Response Interval	The time to wait to receive a response to the host-query message from the host.
Robust Count	Specifies the value used to calculate several IGMP message intervals.

querier

Syntax

querier

Context

[Tree] (clear>service>id>igmp-snooping querier)

Full Contexts

clear service id igmp-snooping querier

Supported Platforms

All

Description

This command clears the information on the IGMP snooping queriers for the VPLS service.

querier

Syntax

querier

Context

[Tree] (clear>service>id>mld-snooping querier)

Full Contexts

clear service id mld-snooping querier

Supported Platforms

All

Description

This command clears MLD snooping querier information.

18.4. query-results

query-results

Syntax

query-results id query-id

query-results name query-name

Context

[Tree] (show>subscr-mgmt>wlan-gw>tunnels query-results)

Full Contexts

show subscriber-mgmt wlan-gw tunnels query-results

Supported Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

Description

This command shows the results of a query configured under subscr-mgmt>wlan-gw>ue-query.

Parameters

query-id—

Identifies the query by numeric ID.

Values—

1 to 1024

query-name—

Identifies the query name, up to 32 characters.

Output

The following output is an example of the results of a tunnel query.

Sample Output

WLAN-GW> show subscriber-mgmt wlan-gw tunnels query-results name "min_3_dsm_ue"

===============================================================================

WLAN-GW tunnels

===============================================================================

Router : 10

Encapsulation : gre

Remote IP address : 10.0.0.2

Local IP address : 10.0.0.10

ISA group ID : 1

ISA member ID : 1

Interface : grp-itf

Interface Service ID : 5

First move time : N/A

AP MAC address : (Unknown)

AP MAC learn failed : true

No. of UE : 3

No. of migrant UE : 0

No. of DSM UE : 3

No. of layer-2 wholesale UE : 0

No. of cross-connect UE : 0

No. of ESM UE : 0

-------------------------------------------------------------------------------

Router : 10

Encapsulation : gre

Remote IP address : 10.0.0.4

Local IP address : 10.0.0.10

ISA group ID : 1

ISA member ID : 1

Interface : grp-itf

Interface Service ID : 5

First move time : N/A

AP MAC address : (Unknown)

AP MAC learn failed : true

No. of UE : 4

No. of migrant UE : 0

No. of DSM UE : 4

No. of layer-2 wholesale UE : 0

No. of cross-connect UE : 0

No. of ESM UE : 0

-------------------------------------------------------------------------------

No. of WLAN-GW tunnels: 2

===============================================================================

query-results

Syntax

query-results id query-id

query-results name query-name

Context

[Tree] (show>subscr-mgmt>wlan-gw>ue query-results)

Full Contexts

show subscriber-mgmt wlan-gw ue query-results

Supported Platforms

7750 SR, 7750 SR-e, 7750 SR-s, VSR

Description

This command shows the results of a query configured under subscr-mgmt>wlan-gw>ue-query.

Parameters

query-id—

Identifies the query by numeric ID.

Values—

1 to 1024

query-name—

Identifies the query name, up to 32 characters.

Output

The following output is an example of the results of a UE query.

Sample Output

WLAN-GW>show subscriber-mgmt wlan-gw ue query-results name "by_mac"

===============================================================================

WLAN-GW UE

===============================================================================

Tunnel Router : 10

Encapsulation : gre

Tunnel Remote IP address : 10.0.0.2

Tunnel Local IP address : 10.0.0.10

MAC address : 00:00:5e:00:53:11

IP address : 10.16.0.3

State : distributed-sub-mgmt

ISA group ID : 1

ISA member ID : 1

Last move time : N/A

AP MAC address : (Unknown)

Service Set ID (SSID) : (Not Specified)

MPLS label : (Not Specified)

Expiry time : 2019/01/21 14:37:56

Idle timeout (s) : (Not Specified)

Session expiry time : 2019/01/21 14:37:56

NAT policy : dsm_nat

HTTP redirect policy : (Not Specified)

DSM IP filter : (Not Specified)

Accounting policy : dsm_aaa

Accounting update period (s): 300

Accounting update time : 2019/01/21 14:07:56

Ingress PIR (kilobps) : max

Ingress CIR (kilobps) : max

Egress PIR (kilobps) : max

Egress CIR (kilobps) : max

Application profile : (Not Specified)

IP address family : ipv4-only

SLAAC prefix : ::

SLAAC address 1 : ::

SLAAC address 2 : ::

SLAAC address 3 : ::

SLAAC expiry time : N/A

DHCP addres deprecated : no

DHCPv6 address : ::

DHCPv6 addres deprecated : no

Identity Association ID : (Not Specified)

Identity Association ID val*: no

DHCPv6 lease expiry time : N/A

Bridge ID : (Not Specified)

Received packets : 4

Received bytes : 440

Transmitted packets : 5

Transmitted bytes : 788

Result number : 1/1

-------------------------------------------------------------------------------

No. of WLAN-GW UE: 1

===============================================================================

* indicates that the corresponding row element may have been truncated.

18.5. queue

queue

Syntax

queue queue-group queue-group-name port-id {ingress | egress} [id queue-id] [instance instance-id]

queue sap sap-id {ingress | egress} [id queue-id]

queue subscriber sub-ident-string [sla-profile sla-profile-name] {ingress | egress} [id queue-id]

Context

[Tree] (show>qos queue)

Full Contexts

show qos queue

Supported Platforms

All

Description

The show qos queue command outputs the Burst Control Group (BCG) name and slowest accurate visitation time for the specified queues.

For each queue specified, the system may find multiple hardware queues. This may be true for ingress queues on multipoint services (VPLS, IES, VPRN) or for queues created on an Ethernet Link Aggregation Group (LAG). When this is true, the show command displays the BCG name for each individual hardware queue.

The BCG name associated with a queue may be specified in the show bcg command to display the historical and current visitation time for the BCG managing the burst tolerance of the queue. If the output visitation time is greater (longer time) than the queue returned slowest accurate visitation time, the queue’s shaping rate may be negatively impacted.

Parameters

queue-group-name port-id—

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues within the specified queue-group-name on the specified port-id. If the specified port-id is not provisioned on the system or the specified queue-group-name is not found on the port’s specified direction, the show command will fail.

Values—

port-id: up to 17 characters

queue-group-name: up to 32 characters

{ingress | egress}—

Specifies the direction to display and are mutually exclusive.

queue-id—

Limits the return queues to a single queue-id.

Values—

1 to 16

instance-id—

Specifies which instance of a queue group with template queue-group-name to which this queue should be redirected. This parameter is only valid for queue groups on egress ports where policy-based redirection is required.

Values—

1 to 65535

sap-id—

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues within the specified sap-id. If the specified sap-id is not found, the show command will fail.

Values—

up to 64 characters

sub-ident-string—

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified sub-ident-string. If the specified sub-ident-string does not exist, the show command will fail.

Values—

up to 32 characters

sla-profile-name—

Specifies that the system should find and display the BCG and calculate the slowest accurate visitation time for the queues associated with the specified subscriber and sla-profile sla-profile-name. If the specified sla-profile-name does not exist, the show command will fail.

18.6. queue-depth

queue-depth

Syntax

queue-depth [queue queue-id] [ingress | egress]

Context

[Tree] (show>service>id queue-depth)

Full Contexts

show service id queue-depth

Description

This command displays queue depth information for the specified SAP.

Parameters

queue-id—

Specifies the queue ID.

Values—

1 to 32

ingress—

Displays information for the ingress policy.

egress—

Displays information for the egress policy.

18.7. queue-depth-violations

queue-depth-violations

Syntax

queue-depth-violations mda-id[/port] [non-zero-counts-only]

queue-depth-violations mda-id[/port] access-egress [non-zero-counts-only]

queue-depth-violations mda-id[/port] access-egress service service-id [non-zero-counts-only]

queue-depth-violations mda-id[/port] access-egress queue-group queue-group-name [instance instance-id] [non-zero-counts-only]

queue-depth-violations mda-id[/port] network-egress [non-zero-counts-only]

queue-depth-violations mda-id[/port] network-egress queue-group queue-group-name [instance instance-id] [non-zero-counts-only]

Context

[Tree] (show>qos queue-depth-violations)

Full Contexts

show qos queue-depth-violations

Supported Platforms

All

Description

This command displays queue depth violation information, with the option of requesting only the information with a non-zero violation count.

Parameters

mda-id[/port]—

Displays the pool information associated with the specified XMA or MDA and port.

Values—

slot/mda[/port]

non-zero-counts-only—

Displays only non-zero counts.

access-egress—

Displays access egress information.

service-id—

Specifies that the system should find and display queue depth violation information for the queues associated with the specified service-id.

Values—

1 to 2147483648, svc-name: up to 64 characters

queue-group-name —

Specifies that the system should find and display information for the queues within the specified queue-group-name, up to 32 characters, on the specified mda-id.

instance-id—

Values—

1 to 65535

network-egress—

Displays network egress information.

Output

The following output is an example of queue depth violation information, and Table 370 describes the output fields.

Sample Output

*A:PE# show qos queue-depth-violations access-egress service 2147483647

===============================================================================

Queue Depth Violation Information (Egress SAP)

===============================================================================

-------------------------------------------------------------------------------

Queue: 2147483647->1/x1/1/c1/1:4096->1 Last seen: Thu Mar 26 12:39:33 PDT 2020

Oper MBS: 1024 KB Violation Threshold Percnt: 75.00

Queue Poll Int: 10 ms HWM Poll Int: 90 ms Total Violations: 30

-------------------------------------------------------------------------------

Queue: 2147483647->1/x1/1/c1/1:4096->2 Last seen: Thu Mar 26 12:39:33 PDT 2020

Oper MBS: 2048 KB Violation Threshold Percnt: 70.00

Queue Poll Int: 10 ms HWM Poll Int: 90 ms Total Violations: 0

-------------------------------------------------------------------------------

Queue: 2147483647->1/x1/1/c1/1:4096->3 Last seen: Thu Mar 26 12:39:33 PDT 2020

Oper MBS: 3072 KB Violation Threshold Percnt: 85.00

Queue Poll Int: 10 ms HWM Poll Int: 90 ms Total Violations: 50

===============================================================================

*A:PE# show qos queue-depth-violations access-egress service 2147483647 non-zero-counts-only

===============================================================================

Queue Depth Violation Information (Egress SAP)

===============================================================================

-------------------------------------------------------------------------------

Queue: 2147483647->1/x1/1/c1/1:4096->1 Last seen: Thu Mar 26 12:39:33 PDT 2020

Oper MBS: 1024 KB Violation Threshold Percnt: 75.00

Queue Poll Int: 10 ms HWM Poll Int: 90 ms Total Violations: 30

-------------------------------------------------------------------------------

Queue: 2147483647->1/x1/1/c1/1:4096->3 Last seen: Thu Mar 26 12:39:33 PDT 2020

Oper MBS: 3072 KB Violation Threshold Percnt: 85.00

Queue Poll Int: 10 ms HWM Poll Int: 90 ms Total Violations: 50

===============================================================================

Table 370: Show QoS Queue Depth Violation Output Fields

Label	Description
Queue	Displays the queue information
Last seen	Displays the date and time of the last seen violation
Oper MBS	Displays the operational MBS size
Violation Threshold Percnt	Displays the violation threshold percentage
Queue Poll Int	Displays the queue polling interval
HWM Poll Int	Displays the HWM polling interval
Total Violations	Displays the total number of violations

18.8. queue-group

queue-group

Syntax

queue-group [queue-group-name] {ingress | egress} [{association | detail}]

queue-group summary

Context

[Tree] (show>qos queue-group)

Full Contexts

show qos queue-group

Supported Platforms

All

Description

This command displays queue-group information.

Parameters

queue-group-name—

Specifies the name of an existing queue group template up to 32 characters.

ingress—

Specifies whether the queue group name is an ingress policy.

egress—

Specifies whether the queue group name is an egress policy.

association—

Displays the entities associated with the specified queue group name.

detail—

Displays detailed queue group information for the specified queue group name.

summary—

Displays the total number of queue-group instances per card (IOM or XCM).

Output

The following outputs are examples of queue group information.

Sample Output

*A:PE# show qos queue-group egress

===============================================================================

Queue Group Egress

===============================================================================

Group-Name Description

-------------------------------------------------------------------------------

qg1

_tmnx_nat_egr_q_grp NAT/LNS Egress Queue Group Template

policer-output-queues Default egress policer output queues.

_tmnx_nat_egr_q_grp_v2 NAT/LNS Egress Queue Group Template for ISAv2

_tmnx_lns_esm_egr_q_grp LNS ESM Egress Queue Group Template

-------------------------------------------------------------------------------

Egress Queue Groups : 5

-------------------------------------------------------------------------------

===============================================================================

*A:PE#

*A:PE# show qos queue-group egress "qg1" detail

===============================================================================

QoS Queue-Group Egress

===============================================================================

-------------------------------------------------------------------------------

QoS Queue Group

-------------------------------------------------------------------------------

Group-Name : qg1

Description : (Not Specified)

Queues HQoS Managed : True

HS Attachment Policy : default

-------------------------------------------------------------------------------

Queue Information

-------------------------------------------------------------------------------

Queue-Id : 1 Queue-Type : best-effort

Admin PIR : 50000 Admin CIR : 0

PIR Rule : closest CIR Rule : closest

CBS : def MBS : 1000 KB

Packet Byte Offset : add 0

Adv Config Policy : (Not Specified)

Parent : s1

PIR Level/Weight : 1/1 CIR Level/Weight : 0/1

Burst Limit : default

Wred Queue Mode : none Wred Queue SlopeUsage: not-applicable

Slope Policy : default

Dynamic MBS : enabled Queue Delay : not-applicable

High-Plus Drop Tail : def High Drop Tail : def

Low Drop Tail : def Exceed Drop Tail : def

-------------------------------------------------------------------------------

HS Queue Information

-------------------------------------------------------------------------------

Queue-Id : 1

Admin PIR : 50000

PIR Rule : closest

MBS : 1000 KB

Packet Byte Offset : add 0

Burst Limit : default

HS Class Weight : 1 HS Wrr Weight : 1

HS Wred-Q Slope Plcy : _tmnx_hs_default

HS Alt Class Pool : False

-------------------------------------------------------------------------------

HS Wrr Group Information

-------------------------------------------------------------------------------

HS Wrr Group Id : 1 Class Weight : 1

Rate : max Percent Rate : 100.00

PIR Adaptation Rule: closest

HS Wrr Group Id : 2 Class Weight : 1

Rate : max Percent Rate : 100.00

PIR Adaptation Rule: closest

-------------------------------------------------------------------------------

===============================================================================

Queue Group FC Mapping

===============================================================================

FC Name Queue-Id

-------------------------------------------------------------------------------

No Matching Entries

===============================================================================

Queue Group Ports (access)

===============================================================================

Port Sched Pol Acctg Pol Stats Description QGrp-Instance

-------------------------------------------------------------------------------

5/1/1 0 No 1

-------------------------------------------------------------------------------

===============================================================================

Queue Group Ports (network)

===============================================================================

Port Sched Pol Policer-Ctrl-Pol Acctg Pol Stats Description QGrp-Instance

-------------------------------------------------------------------------------

No Matching Entries

===============================================================================

Qos Sap-Egress FC Group-Queue References

===============================================================================

Sap Policy FC Name Queue Id

-------------------------------------------------------------------------------

No Matching Entries

===============================================================================

Qos Sap-Egress FC Port-Redirect-Group-Queue References

===============================================================================

Sap Policy FC Name Queue Id

-------------------------------------------------------------------------------

No Matching Entries

===============================================================================

Queue Group Policer

===============================================================================

No Matching Entries

===============================================================================

*A:PE#

*A:PE# show qos queue-group ingress

===============================================================================

Queue Group Ingress

===============================================================================

Group-Name Description

-------------------------------------------------------------------------------

qg1

_tmnx_nat_ing_q_grp NAT/LNS Ingress Queue Group Template

_tmnx_nat_ing_q_grp_v2 NAT/LNS Ingress Queue Group Template for ISA*

_tmnx_lns_esm_ing_q_grp LNS ESM Ingress Queue Group Template

-------------------------------------------------------------------------------

Ingress Queue Groups : 4

-------------------------------------------------------------------------------

===============================================================================

* indicates that the corresponding row element may have been truncated.

*A:PE#

*A:PE# show qos queue-group ingress "qg1" detail

===============================================================================

QoS Queue-Group Ingress

===============================================================================

-------------------------------------------------------------------------------

QoS Queue Group

-------------------------------------------------------------------------------

Group-Name : qg1

Description : (Not Specified)

-------------------------------------------------------------------------------

Q Mode CIR Admin PIR Admin CBS PIR Lvl/Wt Parent

CIR Rule PIR Rule MBS CIR Lvl/Wt BurstLimit(B)

Pkt Bt Ofst Adv Config Policy Name

Low Drop Tail

FIR Admin FIR Rule Cir-non-profiling

-------------------------------------------------------------------------------

No Matching Entries

===============================================================================

Queue Group Ports

===============================================================================

Port Sched Pol Acctg Pol Stats Description

-------------------------------------------------------------------------------

No Matching Entries

===============================================================================

Queue Group Sap FC Maps

===============================================================================

Sap Policy FC Name Queue (id type)

-------------------------------------------------------------------------------

No Matching Entries

===============================================================================

Queue Group FP Maps

===============================================================================

Card Num Fp Num Instance Type

-------------------------------------------------------------------------------

1 1 1 Access

-------------------------------------------------------------------------------

Entries found: 1

-------------------------------------------------------------------------------

===============================================================================

Queue Group Service Maps

===============================================================================

Service Id Service Type Instance

-------------------------------------------------------------------------------

No Matching Entries

===============================================================================

Queue Group Policer

===============================================================================

Policer Id : 1

Description : (Not Specified)

PIR Adptn : closest CIR Adptn : closest

Parent : none Level : 1

Weight : 1 Adv. Cfg Plcy: none

Admin PIR : max Admin CIR : 0

CBS : def MBS : def

Hi Prio Only : def Pkt Offset : 0

Profile Capped : Disabled

StatMode : minimal

===============================================================================

*A:PE#

*A:PE# show qos queue-group summary

===============================================================================

Queue-group instances per card

===============================================================================

card port-acc-ing port-acc-egr port-nw-egr fp-acc-ing fp-nw-ing

-------------------------------------------------------------------------------

1 0 0 0 1 0

2 0 1 0 0 0

3 0 0 0 0 0

4 0 0 0 0 0

5 0 3 0 0 0

-------------------------------------------------------------------------------

Total ingress QG templates per system : 4

Total egress QG templates per system : 5

===============================================================================

*A:PE#

CIR Rule PIR Rule MBS CIR Lvl/Wt BurstLimit(B)

CIR Prcnt PIR Prcnt Low Drop Tail

18.9. queue-group-redirect-list

queue-group-redirect-list

Syntax

queue-group-redirect-list [policy-name] [association | detail]

Context

[Tree] (show>qos queue-group-redirect-list)

Full Contexts

show qos queue-group-redirect-list

Supported Platforms

All

Description

This command displays queue group redirect list information.

Parameters

policy-name—

Specifies the name of a queue group redirect list, up to 32 characters.

association—

Displays the entities associated with the specified queue group redirect list.

detail—

Displays detailed information, including queue group redirect list associations.

Output

The following output is an example of queue group redirect list information.

Sample Output

A:PE# show qos queue-group-redirect-list detail

===============================================================================

Queue Group Redirect List Information

===============================================================================

Policy Name : list1

Match Type : vxlan-vni

-------------------------------------------------------------------------------

Match Instance

-------------------------------------------------------------------------------

1 1

2 2

3 3

-------------------------------------------------------------------------------

Service Associations

-------------------------------------------------------------------------------

Service ID Service Type SAP

-------------------------------------------------------------------------------

1 IES 1/1/1 (Ingress/Egress)

-------------------------------------------------------------------------------

===============================================================================

A:PE#