Configuration of an NTP peer configures symmetric active mode for the configured peer. Although any system can be configured to peer with any other NTP node, it is recommended to configure authentication and to configure known time servers as their peers. Use the no form of the command to remove the configured peer.
config>system>time>ntp
— peer ip-address [version version] [key-id key-id]
— [prefer]
config>system>time>ntp#
— config>system>time>ntp# peer 192.168.1.1 key-id 1
— config>system>time>ntp# no shutdown
The following example shows NTP enabled with the peer command configured.
A:sim1>config>system>time>ntp# info
----------------------------------------------
no shutdown
peer 192.168.1.1 key-id 1
----------------------------------------------
A:sim1>config>system>time>ntp#