Use the following format to reference Ethernet satellite client ports:
port esat- sat-id/slotNum/portNum
where:
sat-id is between 1 and 20
slotNum is always 1
portNum is between 1 and 64
Use the following format to reference Ethernet satellite uplink port:
port esat- sat-id/1/uplink-id
where:
sat-id is between 1 and 20
uplink-id is between u1 and u4
Use the following format to reference TDM satellite client ports:
port tsat- sat-id/slotNum/portNum.channel
where:
sat-id is between 1 and 20
slotNum is always 1
portNum is between 1 and 4
Use the following format to reference TDM satellite uplink port:
port tsat- sat-id/1/u1
where:
sat-id is between 1 and 20
Ethernet satellite client ports support all port modes (access, network, and client).
Configuring services associated with satellite client ports is the same as configuring services on local 7750 SR ports, except that satellite client ports are referenced with the syntax for the Ethernet satellite port described above. It is required that a port-scheduler-policy is created to ensure that the 7750 SR is able to shape the traffic for the egress satellite port type and speed.