Show Command Output and Console Messages

The show>system>information command shows the current value of the bad/good exec URLs and indicates whether a post-boot configuration extension file was executed when the system was booted. If an extension file was executed, the show>system>information command also indicates if it completed successfully or not.

The following is an example for the 7750 SR:

ALA-12>config>system#  show system information
===============================================================================
System Information
===============================================================================
System Name            : ALA-12
System Contact         : Fred Information Technology
System Location        : Bldg.1-floor 2-Room 201
System Coordinates     : N 45 58 23, W 34 56 12
System Up Time         : 1 days, 04:59:33.56 (hr:min:sec)

SNMP Port              : 161
SNMP Engine ID         : 0000197f000000000467ff00
SNMP Max Message Size  : 1500
SNMP Admin State       : Disabled
SNMP Oper State        : Disabled
SNMP Index Boot Status : Not Persistent

BOF Source             : cf1:
Image Source           : primary
Config Source          : primary
Last Booted Config File: ftp://test:test@192.168.xx.xxx/./12.cfg
Last Boot Cfg Version  : THU MAR 04 22:39:03 2004 UTC
Last Boot Config Header: # TiMOS-L-14.0.B1-217 boot/
i386 Nokia 7750 SR Copyright (c) 
                         2000-2016 Nokia.
                        # All rights reserved. All use subject to applicable license
                         agreements.
                         # Built on Wed Jul 13 19:08:56 PDT 2016 by builder in /
                         rel14.0/b1/B1-217/panos/main
Last Boot Index Version: N/A
Last Boot Index Header : N/A
Last Saved Config      : N/A
Time Last Saved        : N/A
Changes Since Last Save: Yes
Time Last Modified     : 2004/03/06 03:30:45
Max Cfg/BOF Backup Rev : 7
Cfg-OK Script          : ftp://test:test@192.168.xx.xxx/./ok.cfg
Cfg-OK Script Status   : not used
Cfg-Fail Script        : ftp://test:test@192.168.xx.xxx/./fail.cfg
Cfg-Fail Script Status : not used

Management IP Addr     : 192.168.xx.xxx/20
DNS Server             : 192.168.1.254
DNS Domain             : eng.timetra.com
BOF Static Routes      :
  To                   Next Hop
  172.16.0.0/22        192.168.1.251
ICMP Vendor Enhancement: Disabled 
ATM Location ID        : 01:00:00:00:00:11:00:00:00:00:00:00:00:00:00:00
===============================================================================
ALA-12>config>system#

When executing a post-boot configuration extension file, status messages are output to the CONSOLE screen before the ‟Login” prompt.

Following is an example of a failed bootup configuration that caused a boot-bad-exec file containing another error to be executed:

Attempting to exec configuration file:
’ftp://test:test@192.168.xx.xxx/./12.cfg’ ...
System Configuration
Log Configuration
MAJOR: CLI #1009 An error occurred while processing a CLI command -
File ftp://test:test@192.168.xx.xxx/./12.cfg, Line 195: Command "log" failed.
CRITICAL: CLI #1002 An error occurred while processing the configuration file.
The system configuration is missing or incomplete.
MAJOR: CLI #1008 The SNMP daemon is disabled.
If desired, enable SNMP with the ’config>system>snmp no shutdown’ command.
Attempting to exec configuration failure extension file:
’ftp://test:test@192.168.xx.xxx/./fail.cfg’ ...
Config fail extension
Enabling SNMP daemon
MAJOR: CLI #1009 An error occurred while processing a CLI command -
File ftp://test:test@192.168.xx.xxx/./fail.cfg, Line 5: Command "abc log" failed.
TiMOS-L-14.0.B1-217 boot/i386 Nokia 7750 SR Copyright (c) 2000-2016 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Jul 13 19:08:56 PDT 2016 by builder in /rel14.0/b1/B1-217/panos/main


Login: