The admin show configuration command displays the current configuration for a specified configuration region (the default region is configure). The booted and cflash-id options are valid only for the bof configuration region.
admin
— show
— configuration [bof | configure | debug | li] [detail | units] [booted | cflash-id] [intended | running] [flat | full-context | json | xml]
The following example shows a BOF configuration file with the detail option to display all default and unconfigured values and the units option to show units where applicable:
[/admin]
A:admin@node-2# show configuration bof units detail
...
# Generated THU SEP 03 15:29:11 2020 UTC
bof {
configuration {
primary-location "ftp://.../config.cfg"
## secondary-location
## tertiary-location
}
console {
speed 115200 bps
wait-time 3 seconds
}
dns {
## domain
## primary-server
## secondary-server
## tertiary-server
}
image {
primary-location "ftp://.../i386-both.tim"
## secondary-location
## tertiary-location
}
li {
local-save false
separate false
}
license {
primary-location "ftp://.../license"
}
port "management" {
autonegotiate true
duplex full
speed 100 megabps
}
router "management" {
interface "management" {
## ip-mtu
cpm active {
ipv4 {
ip-address 192.168.189.52
prefix-length 24
}
## ipv6
}
cpm standby {
## ipv4
## ipv6
}
}
static-routes {
route 192.168.0.0/16 {
next-hop 192.168.189.1
}
route 172.16.0.0/16 {
next-hop 192.168.189.1
}
}
}
system {
## base-mac-address
fips-140-2 false
## gateway-role
persistent-indices true
## profile
}
}