Use the following CLI syntax to configure ATM interface parameters for SONET/SDH paths:
config# port port-id
— sonet-sdh
— path [sonet-sdh-index]
— atm
— cell-format cell-format
— ilmi [vpi/vci]
— egress
traffic-desc traffic-desc-profile-id
— ingress
traffic-desc traffic-desc-profile-id
— keep-alive [poll-frequency seconds] [poll-count value] [test-frequency seconds]
— protocol protocol-type
— [no] shutdown
— min-vp-vpi value
Use the following CLI syntax to configure ATM interface parameters for IMA bundles.
config>port>multilink-bundle
— ima
— atm
— cell-format cell-format
— min-vp-vpi value
Use the following CLI syntax to configure ATM interface parameters for TDM channels:
config# port {port-id}
— tdm
— ds1 [ds1-id]
— channel-group 1
— atm
— cell-format cell-format
— min-vp-vpi value
— ds3 [sonet-sdh-index]
— atm
— cell-format cell-format
— min-vp-vpi value
— mapping {direct | plcp}
— e1 [e1-id]
— channel-group 1
— atm
— cell-format cell-format
— min-vp-vpi value
— e3 [sonet-sdh-index]
— atm
— cell-format cell-format
— min-vp-vpi value