FP4 Data Path Mapping

The mapping between a card and its MDAs, FPs, MACs, connectors, and ports on FP4-based hardware can be displayed using the show datapath command.

# show datapath 1
 
===============================================================================
Card    [XIOM/]MDA  FP  TAP   MAC Chip Num   Connector      Port
-------------------------------------------------------------------------------
1       x1/1        1   N/A   1              c1
1       x1/1        1   N/A   1              c2
1       x1/1        1   N/A   1              c3
1       x1/1        1   N/A   2              c4
1       x1/1        1   N/A   2              c5
1       x1/1        1   N/A   2              c6
1       x2/1        5   N/A   1              c1
1       x2/1        5   N/A   1              c2
1       x2/1        5   N/A   1              c3
1       x2/1        5   N/A   1              c4
1       x2/1        5   N/A   1              c5
1       x2/1        5   N/A   1              c6
1       x2/1        5   N/A   2              c7
1       x2/1        5   N/A   2              c8
1       x2/1        5   N/A   2              c9
1       x2/1        5   N/A   2              c10
1       x2/1        5   N/A   2              c11
1       x2/1        5   N/A   2              c12
1       x2/1        5   N/A   3              c13
1       x2/1        5   N/A   3              c14
1       x2/1        5   N/A   3              c15
1       x2/1        5   N/A   3              c16
1       x2/1        5   N/A   3              c17
1       x2/1        5   N/A   3              c18
===============================================================================