Basic Configuration

Use the following CLI syntax to create a Cpipe service on a 7750 SR. A route distinguisher must be defined in order for Cpipe to be operationally active.

CLI Syntax:

config>service# cpipe service-id [customer customer-id] [vpn vpn-id] [vc-type {satop-e1 | satop-t1 | cesopsn | cesopsn-cas}] [vc-switching] [create]

For the 7450 ESS platforms, the vc-switching option must be configured for Cpipe functionality, as follows:

cpipe 1 name "XYZ Cpipe 1" customer 1 vc-switching vc-type cesopsn create
            spoke-sdp 20:1 create 
                description "Description for Sdp Bind 20 for Svc ID 1" 
                ingress 
                    vc-label 10002 
                exit 
                egress 
                    vc-label 10001 
                exit
            exit 
            spoke-sdp 50:1 create 
                description "Description for Sdp Bind 50 for Svc ID 1" 
            exit 
            no shutdown 
        exit 

The following displays a Cpipe service configuration example:

*A:ALA-1>config>service# info
----------------------------------------------
...
        cpipe 210 customer 1 vc-type cesopsn create
            service-mtu 1400
            sap 1/5/10.1.3.1 create
            exit
            spoke-sdp 1:210 create
            exit
            no shutdown
        exit
...
----------------------------------------------
*A:ALA-1>config>service#