This route is used to advertise the ISIDs that belong to I-VPLS services as well as the default multicast tree. PBB-Epipe ISIDs are not advertised in Inclusive Multicast routes. The following fields are used:
Route Distinguisher: taken from the RD of the B-VPLS service within the BGP context. The RD can be configured or derived from the value of the bgp-evpn evi.
Ethernet Tag ID: encodes the ISID for a specified I-VPLS.
IP address length: always 32.
Originating router's IP address: carries an IPv4 or IPv6 address.
PMSI attribute:
Tunnel type = Ingress replication (6).
Flags = Leaf no required.
MPLS label: carries the MPLS label allocated for the service in the high-order 20 bits of the label field.
This label is the same label used in the B-MAC routes for the same B-VPLS service unless bgp-evpn mpls ingress-replication-bum-label is configured in the B-VPLS service.
Tunnel endpoint = equal to the originating IP address.
The mLDP P2MP tunnel type is supported on PBB-EPVN services, but it can be used in the default multicast tree only.