The hello-time command configures the Spanning Tree Protocol (STP) hello time for the Virtual Private LAN Service (VPLS) STP instance.
The seconds parameter defines the default timer value that controls the sending interval between BPDU configuration messages by this bridge, on ports where this bridge assumes the designated role.
The active hello time for the spanning tree is determined by the root bridge (except when the STP is running in RSTP mode, then the hello time is always taken from the locally configured parameter).
The configured hello-time value can also be used to calculate the bridge forward delay; see Forward Delay.
CLI syntax:
config>service>vpls service-id# stp
hello-time hello-time