Layer 2 Services and EVPN Configuration Process

Table 1 lists the tasks related to configuring and implementing Layer 2 Services and EVPN functionality.

This guide is presented in an overall logical configuration flow. Each section describes a software area and provides CLI syntax and command usage to configure parameters for a functional area.

Table 1. Configuration Process
Area	Task	Section
VLL Services	Configure services for MPLS-TP	Services Configuration for MPLS-TP
	Configure VCCV BFD	VCCV BFD support for VLL, Spoke-SDP Termination on IES and VPRN, and VPLS Services
	Configure pseudowire switching	Pseudowire Switching
	Configure a VLL service	Configuring a VLL Service with CLI
Virtual Private LAN Service (VPLS)	Configure a VPLS service	Configuring a VPLS Service with CLI
Virtual Private LAN Service (VPLS)	VPLS service management	Service Management Tasks
Ethernet Virtual Private Networks (EVPNs)	Configure EVPN-VXLAN and EVPN-MPLS in the same VPLS service	Configuring EVPN-VXLAN and EVPN-MPLS in the Same VPLS/R-VPLS Service
Ethernet Virtual Private Networks (EVPNs)	Configure an EVPN service	Configuring an EVPN Service with CLI