This section describes a configuration example for BEB C configuration considering the following assumptions:
BEB C and BEB D are MC-LAG peers
B-VPLS 100 on BEB C and BEB D
VPLS 1000 on BEB C and BEB D
MC-LAG 1 on BEB C and BEB D
CLI syntax:
service pbb
— source-bmac ab-ac-ad-ef-00-00
port 1/1/1
— ethernet
— encap-type qinq
lag 1
— port 1/1/1 priority 20
— lacp active administrative-key 32768
redundancy
— multi-chassis
— peer 10.1.1.3 create
— source-address 10.1.1.1
— mc-lag
— lag 1 lacp-key 1 system-id 00:00:00:01:01:01
— system-priority 100
— source-bmac-lsb use-lacp-key
service vpls 100 bvpls
— sap 2/2/2:100 // bvid 100
— mac-notification
— no shutdown
service vpls 101 bvpls
— sap 2/2/2:101 // bvid 101
— mac-notification
— no shutdown
// no per BVPLS source-bmac configuration, the chassis one (ab-ac-ad-ef-00-00) is used
service vpls 1000 ivpls
— backbone-vpls 100
— sap lag-1:1000 //automatically associates the SAP with ab-ac-ad-ef-00-01 (first 36 bits from BVPLS 100 sbmac+16bit source-bmac-lsb)
service vpls 1001 ivpls
— backbone-vpls 101
— sap lag-1:1001 //automatically associates the SAP with ab-ac-ad-ef-00-01(first 36 bits from BVPLS 101 sbmac+16bit source-bmac-lsb)