You can change existing service parameters. The changes are applied immediately. To display a list of services, use the show service service-using vpls command. Enter the parameter such as description, SAP, SDP, and, or service-MTU command syntax, then enter the new information.
The following shows a modified VPLS configuration:
*A:ALA-1>config>service>vpls# info
----------------------------------------------
description "This is a different description."
disable-learning
disable-aging
discard-unknown
local-age 500
remote-age 1000
stp
shutdown
exit
sap 1/1/5:22 create
description "VPLS SAP"
exit
spoke-sdp 2:22 create
exit
no shutdown
----------------------------------------------
*A:ALA-1>config>service>vpls#