SAPs
Ethernet DOT1Q and QinQ are supported — This is applicable to most PBB use cases, for example, one backbone VLAN ID used for native Ethernet tunneling. In the case of QinQ, a single tag x is supported on a QinQ encapsulation port for example (1/1/1:x.* or 1/1/1:x.0).
Ethernet null is supported — This is supported for a direct connection between PBB PEs, for example, no BVID is required.
Default SAP types are blocked in the CLI for the B-VPLS SAP.
The following rules apply to the SAP processing of PBB frames:
For ‟transit frames” (not destined for a local B-MAC), there is no need to process the ITAG component of the PBB frames. Regular Ethernet SAP processing is applied to the backbone header (B-MACs and BVID).
If a local I-VPLS instance is associated with the B-VPLS, ‟local frames” originated/terminated on local I-VPLSs are PBB encapsulated/de-encapsulated using the pbb-etype provisioned under the related port or SDP component.
SDPs
For MPLS, both mesh and spoke-SDPs with split horizon groups are supported.
Similar to regular pseudowire, the outgoing PBB frame on an SDP (for example, B-pseudowire) contains a BVID qtag only if the pseudowire type is Ethernet VLAN. If the pseudowire type is ‛Ethernet’, the BVID qtag is stripped before the frame goes out.