Re-enabling an Apipe Service

Use the following CLI syntax to re-enable an Apipe service that was shut down.

CLI Syntax:

config>service#
apipe service-id 
   no shutdown

PE router 1 (A:ALA-41), example:

A:ALA-41>config>service# apipe 5
A:ALA-41>config>service>apipe# no shutdown
A:ALA-41>config>service>apipe# exit

PE router 2 (A:ALA-42), example:

A:ALA-42>config>service# apipe 5
A:ALA-42>config>service>apipe# no shutdown 
A:ALA-42>config>service>apipe# exit