Spoke-SDP Auto Edge

The spoke-SDP edge-port command is used to instruct STP to dynamically decide whether the spoke-SDP is connected to another bridge.

If auto-edge is enabled, and STP concludes there is no bridge behind the spoke-SDP, the OPER_EDGE variable is dynamically set to true. If auto-edge is enabled, and a BPDU is received, the OPER_EDGE variable is dynamically set to true (see Spoke-SDP Edge Port).

Valid values for spoke-SDP auto-edge are enabled and disabled, with enabled being the default.

CLI syntax:

config>service>vpls>spoke-sdp>stp#
[no] auto-edge
Default
auto-edge