Common Configuration Tasks

About this task

This section provides a brief overview of the tasks that must be performed to configure IES services and provides the CLI commands.

  1. Associate an IES service with a customer ID.
  2. Associate customer ID with the service.
  3. Assign an IP address.
  4. Create a subscriber interface (for 7450 ESS and 7750 SR only and optional).
  5. Create an interface.
  6. Define SAP parameters on the interface

    • Select node(s) and port(s).

    • Optional — select QoS policies other than the default (configured in the config>qos context); for 7450 ESS and 7750 SR only.

    • Optional — select filter policies (configured in the config>filter context).

    • Optional — select accounting policy (configured in the config>log context); for 7450 ESS and 7750 SR only.

  7. Enable service.
Parent topic: Configuring an IES Service with CLI