Modifying VPRN Service Parameters

Use the CLI syntax to modify VPRN parameters. The following example displays the VPRN service creation output.

*A:ALA-1>config>service# info
----------------------------------------------
...
vprn 1 customer 1 create
            shutdown
            vrf-import "vrfImpPolCust1"
            vrf-export "vrfExpPolCust1"
            ecmp 8
            maximum-routes 2000
            autonomous-system 10000
            route-distinguisher 10001:1
            interface "to-ce1" create
                address 10.1.1.1/24
                sap 1/1/10:1 create
                exit
            exit
            static-route-entry 10.5.0.0/24 
                next-hop 10.1.1.2
            bgp
                router-id 10.0.0.1
                group "to-ce1"
                    export "vprnBgpExpPolCust1"
                    peer-as 65101
                    neighbor 10.1.1.2
                    exit
                exit
            exit
            spoke-sdp 2 create
            exit
        exit
...
----------------------------------------------
*A:ALA-1>config>service>vprn#