Use the following rules and syntax to configure at the mirror destination node.
The far-end ip-address command is not supported with LDP IPv6 transport tunnel. The user must reference a spoke-SDP using a LDP IPv6 SDP coming from mirror source node.
In the spoke-sdp sdp-id:vc-id command, vc-id should match that of the spoke-sdp configured in the mirror-destination context at mirror source node.
Configuring ingress-vc-label is optional; both static and t-ldp are supported.
configure mirror mirror-dest 10 remote-source
far-end ip-address [vc-id vc-id] [ing-svc-label ingress-vc-label | tldp] [icb]
— no far-end ip-address
— spoke-sdp sdp-id:vc-id [create]
— ingress-vc-label ingress-vc-label
— exit
— no shutdown
— exit
— exit
Mirroring and LI is also supported with PW redundancy feature when the endpoint spoke-SDP, including the ICB, is using a LDP IPv6 tunnel.