19. r Commands

19.1. radius

radius

Syntax

radius

Context

[Tree] (clear>li radius)

Full Contexts

clear li radius

Description

This command clears RADIUS associated entities.

Supported Platforms

All

19.2. radius-accounting

radius-accounting

Syntax

radius-accounting [policy-name]

Context

[Tree] (clear>subscriber-mgmt radius-accounting)

Full Contexts

clear subscriber-mgmt radius-accounting

Description

This command clears RADIUS accounting data for the specified policy.

Parameters

policy-name—

The name of the policy. The string is case sensitive and limited to 32 ASCII 7-bit printable characters with no spaces.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

19.3. radius-accounting-policy

radius-accounting-policy

Syntax

radius-accounting-policy name association

radius-accounting-policy [name]

radius-accounting-policy name statistics

Context

[Tree] (show>subscr-mgmt radius-accounting-policy)

Full Contexts

show subscriber-mgmt radius-accounting-policy

Description

This command displays RADIUS accounting policy information.

Parameters

name—

Specifies the RADIUS accounting policy name.

association—

Displays parameters associated with this RADIUS accounting policy.

statistics—

Displays statistics associated with this RADIUS accounting policy.

Output

The following output displays subscriber management RADIUS accounting policy information.

Sample Output

*B:asd-tr0610-dr421# show subscriber-mgmt radius-accounting-policy "ZiggoAcct1813"

statistics

===============================================================================

Radius Accounting Policy ZiggoAcct1813 Statistics

===============================================================================

Tx Requests : 36035966 Rx Responses : 36035966

Request Timeouts : 0 Send Retries : 2713

Send Failed : 0

-------------------------------------------------------------------------------

Radius Servers

-------------------------------------------------------------------------------

Index IP Address Tx Reqs Rx Resps Req Timeouts Req Send Failed

-------------------------------------------------------------------------------

1 172.18.129.36 9012635 9011762 873 0

2 172.18.129.37 9004736 9003814 922 0

3 172.18.129.68 9010236 9009925 311 0

4 172.18.129.69 9011115 9010465 650 0

===============================================================================

Table 380 describes subscriber management RADIUS accounting policy output fields.

Table 380: RADIUS Accounting Policy Field Descriptions

Label	Description
Tx Requests/TX Reqs	Displays the number of accounting requests transmitted for this policy.
Rx Responses/Rx Resps	Displays the number of accounting responses received for this policy.
Request Timeouts/Req Timeouts	Displays the number of accounting requests which have timed out for this policy.
Send Retries	Displays the number of retries to a different server for a single accounting request for this policy.
Send Failed Req Send Failed	Displays how many accounting requests failed because the packet could not be sent out for this policy.
Radius Servers	Displays a table in which the statistics associated with this RADIUS accounting policy are broken down by individual RADIUS server. The table columns are: Index—displays the index number assigned to the RADIUS server. The index determines the sequence in which the servers are queried for authentication requests. Servers are queried in order from lowest to highest index. IP Address—the address of the RADIUS server. TX Reqs—see TX Requests in this table. Rx Resps—see RX Responses in this table. Req Timeouts—see Request Timeouts in this table. Req Send Failed—see Send Failed in this table.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

radius-accounting-policy

Syntax

radius-accounting-policy [rad-acct-plcy-name]

radius-accounting-policy rad-acct-plcy-name associations

radius-accounting-policy rad-acct-plcy-name statistics

Context

[Tree] (show>app-assure radius-accounting-policy)

Full Contexts

show application-assurance radius-accounting-policy

Description

This command displays RADIUS accounting policy information.

Parameters

rad-acct-plcy-name —

Specifies the RADIUS accounting policy.

associations—

Specifies to show what contexts are associated with this policy.

statistics—

Specifies to show statistics related to this policy.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

radius-accounting-policy

Syntax

radius-accounting-policy rad-acct-plcy-name [server server-index] statistics

Context

[Tree] (clear>app-assure radius-accounting-policy)

Full Contexts

clear application-assurance radius-accounting-policy

Description

This command clears application assurance RADIUS accounting statistics for the specified policy.

Parameters

policy-name—

The name of the policy. The string is case sensitive and limited to 32 ASCII 7-bit printable characters with no spaces.

server-index—

The index for the RADIUS server.

Values—

1 to 5 (a maximum of 5 accounting servers)

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

radius-accounting-policy

Syntax

radius-accounting-policy [name]

Context

[Tree] (show>ipsec radius-accounting-policy)

Full Contexts

show ipsec radius-accounting-policy

Description

This command displays RADIUS accounting-policy related information.

Parameters

name—

Specifies an existing RADIUS accounting policy.

Output

The following is an example output for the show ipsec radius-accounting-policy command.

Sample Output

show ipsec radius-accounting-policy

===============================================================================

Radius Accounting Policy

===============================================================================

Policy Name Server Policy Include Attribs Upd Int

Jitter

-------------------------------------------------------------------------------

rad-acct-policy-1 nasId nasPortId 20

framedIpAddr

===============================================================================

Number of entries: 1

===============================================================================

show ipsec radius-accounting-policy "rad-acct-policy-1"

===============================================================================

IPsec Radius Accounting Policy Detail

===============================================================================

Name : rad-acct-policy-1

Server Policy : (Not Specified)

Include Attr : nasId nasPortId framedIpAddr

Update Interval : 20

Jitter : 10 sec.

===============================================================================

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

19.4. radius-acct

radius-acct

Syntax

radius-acct

Context

[Tree] (show>service>active-subscribers>hierarchy radius-acct)

Full Contexts

show service active-subscribers hierarchy radius-acct

Description

This command provides information about subscriber RADIUS accounting sessions including: the accounting policy name, the accounting mode, the interim intervals, the accounting session ID, and the multi-session ID. If there are no RADIUS accounting sessions enabled for subscribers, this command still shows the session ID that can be used by CoA.

PD hosts modeled as routes are not considered hosts, and therefore, are not shown in the output of this command.

This command only shows a numeric RADIUS session ID even if the RADIUS accounting policy is configured using the descriptive format.

Output

The following output is an example of subscriber RADIUS accounting session information.

Sample Output

# show service active-subscribers hierarchy radius-acct

===============================================================================

Active Subscribers Hierarchy (accounting information)

===============================================================================

-- sub-01-0501

(sub-profile-1)

| Acct-policy : acct-policy-1

| Mode : Queue Instance (Interim)

| : Session (Interim-Host)

| Cfg. update ivl : 01h00m00s

+-- sap:[1/1/4:2111.51] - sla:sla-profile-1

| |

| +-- Queue Instance Acct - acct-policy-1

| session-id : 0609FF000000175FD249FD

| multi-session-id : 0609FF000000175FD249FD

| interim-interval : 01h00m00s

+-- IPOE-Session - mac:00:01:01:00:00:51

| |

| +-- Session Acct - acct-policy-1

| session-id : 0609FF000000155FD249FD

| multi-session-id: 0609FF000000175FD249FD

| interim-interval: 01h00m00s

|-- 10.250.13.2

| |

| +-- no radius acct

| session-id : 0609FF000000185FD74E68

+-- 2001:db8:1:200::1/128

+-- no radius acct

| session-id : 0609FF000000165FD249FD

+-- 2001:db8:d102::/64

session-id : N/A

multi-session-id: N/A

-------------------------------------------------------------------------------

Number of active subscribers : 1

===============================================================================

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

19.5. radius-acct-terminate-cause

radius-acct-terminate-cause

Syntax

radius-acct-terminate-cause

Context

[Tree] (tools>dump>aaa radius-acct-terminate-cause)

Full Contexts

tools dump aaa radius-acct-terminate-cause

Description

This command shows all available termination causes and their respective number values. The TermCause is equivalent to VSA 226 Alc-Error-Code numeric values. The description is equivalent to VSA 227Alc-Error-Message string.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

19.6. radius-attr-username

radius-attr-username

Syntax

radius-attr-username [user-name] [summary]

Context

[Tree] (tools>dump>subscr-mgmt radius-attr-username)

Full Contexts

tools dump subscriber-mgmt radius-attr-username

Description

This command displays a list of subscriber IDs associated to each username and statistics associated to the username.

Parameters

user-name—

Specifies the username that matches the RADIUS attribute VSA [1] username. A single username can also be specified to query the list of associated subscriber IDs.

summary—

Displays summary RADIUS attribute username information.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

19.7. radius-authentication-policy

radius-authentication-policy

Syntax

radius-authentication-policy [name]

Context

[Tree] (show>ipsec radius-authentication-policy)

Full Contexts

show ipsec radius-authentication-policy

Description

This command displays IPsec RADIUS authentication policy information.

Parameters

name—

Specifies an existing RADIUS authentication policy.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

19.8. radius-configuration

radius-configuration

Syntax

radius-configuration

Context

[Tree] (show>aaa radius-configuration)

Full Contexts

show aaa radius-configuration

Description

This command displays RADIUS configuration information.

Output

The following is an example of AAA RADIUS configuration information.

Sample Output

# show aaa radius-configuration

===============================================================================

RADIUS configuration

===============================================================================

CoA Port : 3799

===============================================================================

Table 381 provides a description of the counters in the output of the show aaa isa-radius-policy command.

Table 381: AAA ISA RADIUS Policy Field Descriptions

Label	Description
CoA Port	The RADIUS Change of Authorization (CoA) port

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

19.9. radius-proxy-server

radius-proxy-server

Syntax

radius-proxy-server server-name

radius-proxy-server server-name cache

radius-proxy-server server-name cache hex-key hex-string

radius-proxy-server server-name cache string-key string

radius-proxy-server server-name cache summary

radius-proxy-server server-name statistics

radius-proxy-server

Context

[Tree] (show>router radius-proxy-server)

Full Contexts

show router radius-proxy-server

Description

This command displays RADIUS proxy server information.

Parameters

server-name—

Specifies the default RADIUS proxy server name created in the config>router>radius-proxy context.

cache—

Displays cached information.

hex-string—

Displays the hex key string.

Values—

[0x0 to 0xFFFFFFFF (max 64 hex nibbles)]

string—

Displays the packet type of the RADIUS messages to use to generate the key for the cache of this RADIUS proxy server.

summary—

Displays summarized information.

statistics—

Displays statistics for the specified RADIUS proxy server.

Output

The following is an example of subscriber RADIUS proxy server

Sample Output

*B:asd-tr0610-dr421# show router radius-proxy-server "ZiggoRadiusProxyAnyCast" statistics

===============================================================================

RADIUS Proxy server statistics for "ZiggoRadiusProxyAnyCast"

===============================================================================

Rx packet : 28454097

Rx Access-Request : 24846521

Rx Accounting-Request : 3607576

Rx dropped : 22986

Retransmit : 22986

Server admin down : 0

No RADIUS policy configured : 0

No load-balance-key configured : 0

Invalid length : 0

Invalid Code field : 0

Invalid attribute encoding : 0

Invalid User-Name : 0

Invalid password : 0

Invalid accounting Authenticator : 0

Invalid Message-Authenticator : 0

No memory : 0

Accounting-Request with invalid Acct-Status-Type : 0

Accounting-Request with no Acct-Status-Type : 0

Registered user overload : 0

Dropped by Python : 0

Tx Access-Accept : 1929725

Tx Access-Reject : 302354

Tx Access-Challenge : 22598950

Tx Accounting-Response : 3598730

Tx dropped : 1351

No key to cache : 0

Cache key too long : 0

Cache attributes too long : 0

Reached maximum number of cache entries : 0

No memory : 0

Server timeout : 1351

Server authentication failure : 0

Server invalid Code : 0

Invalid attribute encoding : 0

Registered user overload : 0

No RADIUS server configured : 0

RADIUS server send failure : 0

Dropped by Python : 0

===============================================================================

*B:asd-tr0610-dr421# show router radius-proxy-server "ZiggoRadiusDRPProxyanyCast-LEG" statistics

===============================================================================

ISA RADIUS Proxy server statistics for "ZiggoRadiusDRPProxyanyCast-LEG"

===============================================================================

Group 1 member 1

-------------------------------------------------------------------------------

Rx packet : 72250262

Rx Access-Request : 61457394

Rx Accounting-Request : 10792868

Rx dropped : 1525690

Retransmit : 28470

Wrong purpose : 0

No UE MAC to cache : 1497212

Client context limit reached : 0

No ISA RADIUS policy configured : 0

Invalid attribute encoding : 0

Invalid password : 0

Accounting-Request with invalid Acct-Status-Type : 0

Accounting-Request with no Acct-Status-Type : 0

Invalid accounting Authenticator : 0

Invalid Message-Authenticator : 8

Management core overload : 0

Tx Access-Accept : 5830313

Tx Access-Reject : 743060

Tx Access-Challenge : 54844862

Tx Accounting-Response : 9294168

Tx dropped : 12226

Server timeout : 12169

Invalid response Authenticator : 57

Invalid Message-Authenticator : 0

Invalid attribute encoding : 0

RADIUS server send failure : 0

Table 382 describes subscriber RADIUS proxy server output fields.

Table 382: Proxy Server Field Descriptions

Label	Description
Invalid response Authenticator Rx packet	The number of packets received by this RADIUS proxy server
Rx Access-Request	The number of Access-Request packets received by this RADIUS proxy server
Rx Accounting-Request	The number of Accounting-Request packets received by this RADIUS proxy server
Rx dropped	The number of packets received by this RADIUS proxy server but dropped
Retransmit	The number of packets received by this RADIUS proxy server that were rejected because they are retransmitted
Wrong purpose	The number of packets received by this RADIUS proxy server that were rejected because the value of tmnxRadProxSrvPurpose is set to a value not matching the type of packet
No UE MAC to cache	The number of packets received by this RADIUS proxy server that were rejected because the UE MAC address was not present in the packet
Client context limit reached	The number of packets received by this RADIUS proxy server that were rejected because the limit of client contexts was reached. For each RADIUS transaction a client context is created, and are deleted once the transaction is finished.
No ISA RADIUS policy configured	The number of packets received by this RADIUS proxy server that were rejected because it has no ISA RADIUS server policy configured for that type of packet
Server admin down	The number of packets received by this RADIUS proxy server that were rejected because it is administratively shut down
No RADIUS policy configured	The number of packets received by this RADIUS proxy server that were rejected because it has no RADIUS server policy configured for that type of packet
No load-balance-key configured	The number of packets received by this RADIUS proxy server that were rejected because the selected RADIUS server policy's algorithm is set to hashBased and no load balance key is configured
Invalid length	The number of packets received by this RADIUS proxy server that were rejected because their length was invalid
Invalid Code field	The number of packets received by this RADIUS proxy server that were rejected because they had an invalid Code field
Invalid attribute encoding	The number of packets received by this RADIUS proxy server that were rejected because one of the attributes was incorrectly encoded
Invalid User-Name	The number of packets received by this RADIUS proxy server that were rejected because they contained an invalid User-Name attribute
Invalid password	The number of packets received by this RADIUS proxy server that were rejected because the User-Password attribute could not be decoded
Invalid accounting Authenticator	The number of accounting packets received by this RADIUS proxy server that were rejected because they contained an invalid Authenticator field
Invalid Message-Authenticator	The number of packets received by this RADIUS proxy server that were rejected because they contained an invalid Message-Authenticator attribute
Management core overload	The number of packets that were rejected by this RADIUS server because the ISA management core is not able to process any new RADIUS requests because of overload
No memory	The number of packets that were rejected by this RADIUS server because there was not enough memory to store them
Accounting-Request with invalid Acct-Status-Type	The number of accounting packets received by this RADIUS proxy server that were rejected because they contained an invalid Acct-Status-Type attribute
Accounting-Request with no Acct-Status-Type	The number of accounting packets received by this RADIUS proxy server that were rejected because they contained no Acct-Status-Type attribute
Registered user overload	The number of packets that were rejected by this RADIUS server because the registered user indicated to be in overload
Dropped by Python	The number of packets received by this RADIUS proxy server but dropped by Python
Tx Access-Accept	The number of Access-Accept packets transmitted by this RADIUS proxy server
Tx Access-Reject	The number of Access-Reject packets transmitted by this RADIUS proxy server
Tx Access-Challenge	The number of Access-Challenge packets transmitted by this RADIUS proxy server
Tx Accounting-Response	The number of Accounting-Response packets transmitted by this RADIUS proxy server
Tx dropped	The number of packets dropped by this RADIUS proxy server before transmission
No key to cache	The number of packets that could not be cached by this RADIUS proxy server because the key information was not present in the packet
Cache key too long	The number of packets that could not be cached by this RADIUS proxy server because the key information present in the packet was too long
Cache attributes too long	The number of packets that could not be cached by this RADIUS proxy server because the total length of the attributes is too long
Reached maximum number of cache entries	The number of packets that could not be cached by this RADIUS proxy server because the limit has been reached
No memory	The number of packets that could not be transmitted by this RADIUS proxy server because there was not enough memory
Server timeout	The number of packets that were dropped because the RADIUS servers have timed out
Server authentication failure	The number of packets that were dropped because the RADIUS server replied with a packet which failed authentication (invalid response Authenticator or Message Authenticator attribute)
Server invalid Code	The number of packets that were dropped because the RADIUS server replied with a packet with an invalid Code field
Invalid attribute encoding	The number of packets that were dropped because the RADIUS server replied with a packet with an invalid attribute
Registered user overload	The number of packets that were dropped because the registered user indicated to be in overload
No RADIUS server configured	The number of packets that were dropped by this RADIUS server because the RADIUS server policy has no servers configured
RADIUS server send failure	The number of packets that were dropped by this RADIUS server because the packet could not get transmitted to one of the servers in the RADIUS server policy
Dropped by Python	The number of packets that were dropped by this RADIUS server because the packet was dropped by the Python script
Invalid response Authenticator	The number of packets that were dropped because the RADIUS server replied with a packet which failed authentication

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

radius-proxy-server

Syntax

radius-proxy-server server-name statistics

Context

[Tree] (clear>router radius-proxy-server)

Full Contexts

clear router radius-proxy-server

Description

This command clears RADIUS proxy server data.

Parameters

server-name—

Specifies the proxy server name.

statistics—

Clears statistics for the specified server.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

19.10. radius-server-policy

radius-server-policy

Syntax

radius-server-policy policy-name [acct-on-off]

radius-server-policy policy-name associations

radius-server-policy policy-name msg-buffer-stats

radius-server-policy policy-name statistics

radius-server-policy [acct-on-off]

Context

[Tree] (show>aaa radius-server-policy)

Full Contexts

show aaa radius-server-policy

Description

This command displays RADIUS server policy configuration information.

Parameters

policy-name—

Displays information for the specified RADIUS server policy.

association—

Displays the information configured with the RADIUS server policy.

msg-buffer-stats—

Displays statistics related to the RADIUS messages that are buffered for each specified RADIUS server policy.

statistics—

Displays statistics for the specified RADIUS server policy.

act-on-off—

Displays the admin state of the acct-on-off feature.

Output

The following is an example of AAA RADIUS server policy information.

Sample Output

*B:asd-tr0610-dr421# show aaa radius-server-policy "ZiggoAAA_anycast" statistics

===============================================================================

RADIUS server policy "ZiggoAAA_anycast" statistics

===============================================================================

Tx transaction requests : 24818681

Rx transaction responses : 24817329

Transaction requests timed out : 1351

Transaction requests send failed : 0

Packet retries : 12410

Transaction requests send rejected : 0

Authentication requests failed : 303530

Accounting requests failed : 0

Ratio of access-reject over auth responses : 13%

Transaction success ratio : 99%

Transaction failure ratio : 1%

Statistics last reset at : 05/21/2015 01:11:39

Table 383 describes RADIUS server policy statistics output fields.

Table 383: RADIUS Server Policy Statistics Field Descriptions

Label	Description
Tx transaction requests	The number of RADIUS transaction requests transmitted
Rx transaction responses	The number of RADIUS transaction responses received
Transaction requests timed out	The number of RADIUS transaction requests that have timed out
Transaction requests send failed	The number of RADIUS transaction requests that could not be transmitted
Packet retries	The number of times a RADIUS request packet was retransmitted to a server
Transaction requests send rejected	The number of RADIUS transaction requests that were not transmitted due to unacceptable configuration
Authentication requests failed	The number of authentication failures for this policy
Accounting requests failed	The number of accounting failures for this policy
Ratio of access-reject over auth responses	The ratio of access-rejects in the auth responses for this policy
Transaction success ratio	The transaction success ratio for this policy
Transaction failure ratio	The transaction failure ratio for this policy
Statistics last reset at	Indicated the date and time at which the statistics for this policy were last reset

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

radius-server-policy

Syntax

radius-server-policy policy-name msg-buffer [session-id acct-session-id]

Context

[Tree] (tools>perform>aaa radius-server-policy)

[Tree] (tools>dump>aaa radius-server-policy)

Full Contexts

tools dump aaa radius-server-policy

tools perform aaa radius-server-policy

Description

This command dumps the RADIUS message buffer content for the specified radius-server-policy:

message-type (acct-interim or acct-stop)
Acct-Session-Id
Remaining lifetime

When specifying the session-id, the message details are displayed.

Parameters

policy-name—

Specifies the radius-server-policy for which the message buffer content should be displayed.

acct-session-id—

Displays the RADIUS message details for the message with specified session-id that is stored in the RADIUS message buffer.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

radius-server-policy

Syntax

radius-server-policy policy-name msg-buffer [acct-session-id acct-session-id]

radius-server-policy policy-name statistics [msg-buffer-only]

radius-server-policy policy-name server server-index statistics

Context

[Tree] (clear>aaa radius-server-policy)

Full Contexts

clear aaa radius-server-policy

Description

This command dumps the RADIUS message buffer content for the specified radius-server-policy:

message-type (acct-interim or acct-stop)
Acct-Session-Id
Remaining lifetime

When specifying the session-id, the message details are displayed.

Parameters

policy-name—

Specifies the radius-server-policy for which the information should be cleared.

acct-session-id—

Deletes all RADIUS messages or the RADIUS message with specified session-id from the RADIUS message buffer.

msg-buffer-only—

Clears all statistics for the specified radius-server-policy: radius-server-policy statistics, RADIUS server statistics and RADIUS message buffer statistics. With the optional keyword msg-buffer-only, only the RADIUS message buffer statistics are cleared.

server-index —

Clears the RADIUS server statistics for the specified server-index in the specified radius-server-policy.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

19.11. range

range

Syntax

range [area-id]

Context

[Tree] (show>router>ospf range)

[Tree] (show>router>ospf3 range)

Full Contexts

show router ospf range

show router ospf3 range

Description

This command displays ranges of addresses on an Area Border Router (ABR) for the purpose of route summarization or suppression.

Parameters

area-id—

Displays the configured ranges for the specified area.

Values—

ip-address — a.b.c.d

area — 0 to 4294967295

Output

OSPF Range Output

Table 384 describes the OSPF range output fields.

Table 384: OSPF Range Output Fields

Label	Description
Area Id	A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
Address/Mask	The mask for the range expressed as a decimal integer mask length or in dotted decimal notation.
Advertise	False — The specified address/mask is not advertised outside the area. True — The specified address/mask is advertised outside the area.
LSDB Type	NSSA — This range was specified in the NSSA context, and specifies that the range applies to external routes (via type-7 LSAs) learned within the NSSA when the routes are advertised to other areas as type-5 LSAs. Summary — This range was not specified in the NSSA context, the range applies to summary LSAs even if the area is an NSSA.

Sample Output

A:ALA-A# show router ospf 1 range

==========================================================

Rtr Base OSPFv2 Instance 1 Ranges

==========================================================

Area Id Address/Mask Advertise LSDB Type

----------------------------------------------------------

No. of Ranges: 0

==========================================================

A:ALA-A#

A:ALA-A# show router ospf range 180.0.7.9

==========================================================

Rtr Base OSPFv2 Instance 0 Ranges for Area-Id 180.0.7.9

==========================================================

Area Id Address/Mask Advertise LSDB Type

----------------------------------------------------------

No. of Ranges: 0

==========================================================

A:ALA-A#

Supported Platforms

All

19.12. recover-l2aw-bypass

recover-l2aw-bypass

Syntax

recover-l2aw-bypass mda

Context

[Tree] (tools>perform>nat recover-l2aw-bypass)

Full Contexts

tools perform nat recover-l2aw-bypass

Description

This command restores NAT resources to the recovered MS-ISA and resumes forwarding subscriber traffic.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

19.13. redirect-policy

redirect-policy

Syntax

redirect-policy [redirect-policy-name {dest ip-address | associations}]

Context

[Tree] (show>filter redirect-policy)

Full Contexts

show filter redirect-policy

Description

This command shows redirect filter information.

Parameters

redirect-policy-name—

Displays information for the specified redirect policy, up to 32 characters.

dest ip-address—

Directs the router to use a specified IP address for communication.

Values—

ipv4-address:	a.b.c.d.
ipv6-address:	x:x:x:x:x:x:x:x (eight 16-bit pieces)
	x:x:x:x:x:x:d.d.d.d
	x: [0 to FFFF]H
	d: [0 to 255]D

associations—

Appends association information.

Output

Redirect Policy Output — The following output is an example of redirect policy information, and Table 385 describes the fields.

Sample Output

A:ALA-A>config>filter# show filter redirect-policy

===============================================================================

Redirect Policies

===============================================================================

Redirect Policy Applied Description

-------------------------------------------------------------------------------

wccp Yes

redirect1 Yes New redirect info

redirect2 Yes Test test test test

===============================================================================

ALA-A>config>filter#

ALA-A>config>filter# show filter redirect-policy redirect1

===============================================================================

Redirect Policy

===============================================================================

Redirect Policy: redirect1 Applied : Yes

Description : New redirect info

Active Dest : 10.10.10.105

-------------------------------------------------------------------------------

Destination : 10.10.10.105

-------------------------------------------------------------------------------

Description : another test

Admin Priority : 95 Oper Priority: 105

Admin State : Up Oper State : Down

Ping Test

Source Address : None

Interval : 1 Timeout : 30

Drop Count : 5

Hold Down : 0 Hold Remain : 0

Last Action at : 03/19/2007 00:46:55 Action Taken : Disable

===============================================================================

A:ALA-A>config>filter#

Table 385: Filter Redirect-Policy Output Fields

Label	Description
Redirect Policy	Specifies a specific redirect policy
Applied	Specifies whether the redirect policy is applied to a filter policy entry
Description	Displays the user-provided description for this redirect policy
Active Destination	IP address — specifies the IP address of the active destination
Active Destination	none — indicates that there is currently no active destination
Destination	Specifies the destination IP address
Oper Priority	Specifies the operational value of the priority for this destination; the highest operational priority across multiple destinations is used as the preferred destination
Admin Priority	Specifies the configured base priority for the destination
Admin State	Specifies the configured state of the destination
Admin State	Out of Service — tests for this destination will not be conducted
Oper State	Specifies the operational state of the destination
Ping Test	Specifies the name of the ping test
Source Address	Specifies the source address of the ping test (if any)
Timeout	Specifies the amount of time in seconds that is allowed for receiving a response from the far-end host; if a reply is not received within this time the far-end host is considered unresponsive
Interval	Specifies the amount of time in seconds between consecutive requests sent to the far end host
Drop Count	Specifies the number of consecutive requests that must fail for the destination to declared unreachable
Hold Down	Specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable
Hold Remain	Specifies the amount of time in seconds that the system will remain in a hold down state before being used again
Last Action at	Displays a time stamp of when this test received a response for a probe that was sent out

Supported Platforms

All

redirect-policy

Syntax

redirect-policy redirect-policy-name

Context

[Tree] (tools>perform>filter redirect-policy)

Full Contexts

tools perform filter redirect-policy

Description

Commands in this context perform redirect policy operations.

Parameters

redirect-policy-name—

Specifies a particular redirect policy name, up to 32 characters.

Supported Platforms

All

19.14. redirect-policy-binding

redirect-policy-binding

Syntax

redirect-policy-binding [name]

Context

[Tree] (show>filter redirect-policy-binding)

Full Contexts

show filter redirect-policy-binding

Description

This command shows configured redirect-policy bindings information.

Parameters

name—

Displays information for the specified redirect policy binding, up to 32 characters.

Output

Redirect Policy Output — The following output is an example of redirect policy binding information, and Table 386 describes the fields.

Sample Output

A:ALA-A>config>filter# show filter redirect-policy-binding

===============================================================================

Redirect Policy Bindings

===============================================================================

Name Binding Operator Oper State

-------------------------------------------------------------

TestBinding And Up

===============================================================================

ALA-A#

Table 386: Filter Redirect Policy Bindings Output Fields

Label	Description
Test Binding	Specifies a specific test binding field

Supported Platforms

All

19.15. redundancy

redundancy

Syntax

redundancy

Context

[Tree] (tools>dump redundancy)

Full Contexts

tools dump redundancy

Description

Commands in this context dump redundancy parameters.

Supported Platforms

All

redundancy

Syntax

redundancy

Context

[Tree] (show redundancy)

Full Contexts

show redundancy

Description

Commands in this context show redundancy information.

Supported Platforms

All

redundancy

Syntax

redundancy

Context

[Tree] (tools>perform redundancy)

Full Contexts

tools perform redundancy

Description

Commands in this context display redundancy information.

Supported Platforms

All

redundancy

Syntax

redundancy

Context

[Tree] (clear redundancy)

Full Contexts

clear redundancy

Description

Commands in this context clear redundancy parameters.

Supported Platforms

All

19.16. reflectors

reflectors

Syntax

reflectors

Context

[Tree] (show>test-oam>twamp>twamp-light reflectors)

Full Contexts

show test-oam twamp twamp-light reflectors

Description

This command shows TWAMP-Light reflector information.

Output

The following sample output shows TWAMP Light reflector information.

Sample Output

show test-oam twamp twamp-light reflectors

=======================================================================

TWAMP-Light Reflectors

=======================================================================

Router/VPRN Admin UDP Port Prefixes Frames Rx Frames Tx

-----------------------------------------------------------------------

Base Up 15000 1 0 0

500 Up 15000 2 6340 6340

-----------------------------------------------------------------------

No. of TWAMP-Light Reflectors: 2

=======================================================================

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS

19.17. refresh-lsas

refresh-lsas

Syntax

refresh-lsas [lsa-type] [area-id]

Context

[Tree] (tools>perform>router>ospf refresh-lsas)

[Tree] (tools>perform>router>ospf3 refresh-lsas)

Full Contexts

tools perform router ospf refresh-lsas

tools perform router ospf3 refresh-lsas

Description

This command refreshes LSAs for OSPF.

Supported Platforms

All

19.18. relations

relations

Syntax

relations

Context

[Tree] (show>multilink-bundle relations)

Full Contexts

show multilink-bundle relations

Description

This command displays the working and protection bundles associated with this bundle-id.

Output

The following output is an example of multilink bundle relations, and Table 387 describes the output fields.

Sample Output: show multilink-bundle <bundle-id> relations

A:ALA-48>show# show multilink-bundle bundle-ima-1/1.2 relations

==============================================================================

Bundle Relationship

==============================================================================

Bundle Admin Oper Working Protect Active

Id State State Bundle Id Bundle Id Bundle

------------------------------------------------------------------------------

bpgrp-ima-1 Down Down bundle-ima-1/1.1 bundle-ima-1/1.2 Protect

------------------------------------------------------------------------------

Bundles : 1

==============================================================================

A:ALA-48>show#

Table 387: Output Fields: show multilink-bundle relations

Label	Description
BundleID	Displays the bundle number.
Admin State	Up—The bundle is administratively up. Down — The bundle is administratively down.
Oper State	Up — The bundle is operationally up. Down—The bundle is operationally down.
Working BundleID	Displays the bundle that is currently in working mode.
Protect BundleID	Displays the bundle that is currently in protect mode.
Active Bundle	Displays the mode of the active bundle.

Supported Platforms

7450 ESS, 7750 SR-7/12/12e

19.19. release-hold-down

release-hold-down

Syntax

release-hold-down interface interface-name [protocol protocol] [static-policer name]

release-hold-down sap sap-id [protocol protocol] [static-policer name]

Context

[Tree] (tools>perform>security>dist-cpu-protection release-hold-down)

Full Contexts

tools perform security dist-cpu-protection release-hold-down

Description

This command releases a Distributed CPU Protection (DCP) policer from a hold-down countdown (or indefinite hold-down if configured as such).

Parameters

interface interface-name—

Specifies Router interface name.

sap sap-id—

Specifies sap identifier.

protocol protocol—

Specifies DCP protocol name (for example, arp, dhcp).

static-policer name—

Specifies DCP static policer name as defined in the DCP policy.

Supported Platforms

All

19.20. remap-lease-state

remap-lease-state

Syntax

remap-lease-state old-mac ieee-address mac ieee-address

remap-lease-state sap sap-id [mac ieee-address]

Context

[Tree] (tools>perform>subscr-mgmt remap-lease-state)

Full Contexts

tools perform subscriber-mgmt remap-lease-state

Description

This command allows the remapping of all existing hosts if network card on CMTS/WAC side is changed is required.

When this command is executed, the following restrictions apply:

When sap is taken, all leases associated with the SAP are re-written.
1. For a SAP with a configured MAC in lease-populate command, this MAC is taken.
2. For a SAP without a configured MAC the MAC from tools command is taken.
3. For a SAP without a configured MAC and no MAC in tools command no action is performed.
When using the old-mac option, providing a new MAC ieee-address is mandatory.

This command is applicable only when dealing with DHCP lease states which were instantiated using l2header mode of DHCP operation.

Parameters

old-mac ieee-address—

Specifies the old MAC address to remap.

mac ieee-address—

Specifies that the provisioned MAC address is used in the anti-spoofing entries for this SAP when l2-header is enabled. The parameter may be changed mid-session. Existing sessions will not be re-programmed unless a tools perform command is issued for the lease.

sap-id—

Specifies the physical port identifier portion of the SAP definition.

When configured, the SAP parameter remaps all MAC addresses of DHCP lease states on the specified SAP. When no optional MAC parameter is specified, the sap sap-id command remaps all MAC addresses of lease states towards the MAC address specified in the l2-header configuration.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

19.21. remote-bfd-discrim

remote-bfd-discrim

Syntax

remote-bfd-discrim bfd-discriminator

Context

[Tree] (tools>dump>router>lsp-bfd remote-bfd-discrim)

Full Contexts

tools dump router lsp-bfd remote-bfd-discrim

Description

This command displays information the BFD-on-LSP sessions with a specified remote discriminator.

Parameters

bfd-discriminator—

Specifies the BFD discriminator.

Values—

to 4294967295

Supported Platforms

All

19.22. remote-management

remote-management

Syntax

remote-management

Context

[Tree] (clear>system>management-interface remote-management)

Full Contexts

clear system management-interface remote-management

Description

This command clears the remote management service.

Supported Platforms

All

remote-management

Syntax

remote-management [detail]

remote-management manager [manager-name]

Context

[Tree] (show>system>management-interface remote-management)

Full Contexts

show system management-interface remote-management

Description

This command displays a summarized status of the Remote Management service.

Parameters

detail—

Displays detailed remote management service information.

manager-name—

Displays remote management service information for the specified manager.

Output

The following examples show output of the show system management-interface remote- management command and parameters, and the tables describe the fields.

Sample Output: remote-management; output fields Table 388
Sample Output: remote-management detail; output fields Table 389 and Table 388 for fields that are common to all the remote management output commands
Sample Output: remote-management manager; output fields Table 390 and Table 388 for fields that are common to all the remote management output commands

Sample Output: remote-management

#show system management-interface remote-management

===============================================================================

Remote-management service

===============================================================================

Administrative State : Enabled

Operational State : Up

Operational down Reason : N/A

-------------------------------------------------------------------------------

Number of configured managers : 2

Number of operational managers : 1

===============================================================================

Table 388: Output Fields: remote-management

Label	Description
Administrative State	Displays the administrative state of the management service
Operational State	Displays the operational state of the management service
Operational Down Reason	Displays the reason for the last operationally down state change
Number of configured managers	Displays the total number of configured managers
Number of operational managers	Displays the total number of managers whose operational state is Up

Sample Output: remote-management detail

# show system management-interface remote-management detail

===============================================================================

Remote-management service

===============================================================================

Administrative state : Enabled

Operational state : Up

Operational down reason : N/A

Last hello time : 2020/10/06 10:24:29

Last Registration Time : 2020/10/06 10:24:29

Last Registration Status : Succeeded

Sent registration messages : 83

Failed registration messages : 0

Cancelled registrations : 0

-------------------------------------------------------------------------------

Number of configured managers : 1

Number of operational managers : 1

-------------------------------------------------------------------------------

Manager Name Adm Opr TLS

Manager IP

-------------------------------------------------------------------------------

nish-manager Up Up No

192.168.65.3

===============================================================================

Table 389: Output Field: remote-management detail

Label	Description
Last hello Time	Displays the time of the last hello
Last Registration Time	Displays the time of the last registration
Last Registration Status	Displays the time of the last registration status
Sent registration messages	Displays the number of sent registration messages
Failed registration messages	Displays the number of failed registration messages
Canceled registration messages	Displays the number of canceled registration messages
Manager name	Displays the name of the manager
Manager IP	Displays the IP address of the manager
Adm	Displays the administrative state of the manager
Opr	Displays the operational state of the manager
TLS	Displays whether TLS is configured for the manager

Sample Output: remote-management manager

# show system management-interface remote-management manager nish-manager1

===============================================================================

Remote manager

===============================================================================

-------------------------------------------------------------------------------

Manager Name : nish-manager1

Manager Address : 192.168.65.3

Description : My remote manager

-------------------------------------------------------------------------------

Administrative State : Enabled

Operational State : Up

Operational down reason : N/A

Router instance : Management

Device name : Dut-C

Device label :

TLS secured : No

TLS profile : Not Set

Source Address : 192.168.66.166

Source TCP port : 57400

Manager TCP port : 57400

Last registration status : Succeeded

Last registration time : 2020/10/06 10:34:29

Last hello time : 2020/10/06 10:34:29

Time until next hello : 315s

Sent registration messages : 80

Failed registration messages : 0

Canceled registrations : 0

===============================================================================

Table 390: Output Fields: remote-management manager

Label	Description
Manager name	Displays the name of this manager
Manager Address	Displays IP address of this manager
Description	Displays the configured description for this manager
Router instance	Displays the router instance used by this manager
Device name	Displays the device name that is configured for this manager
Device label	Displays the device label that is configured for this manager
TLS secured	Displays the configured TLS status
TLS profile	Displays TLS profile, if configured
Source address	Displays the configured source address
Source TCP port	Displays the TCP source port
Manager TCP port	Displays the manager TCP port
Last registration status	Displays the status of the last registration attempt for this manager
Last registration time	Displays the time of the last registration for this manager
Last hello time	Displays the time of the last hello for this manager
Time until next hello	Displays the time until the next hello for this manager
Sent registration messages	Displays the number of registration messages sent for this manager
Failed registration messages	Displays the number of failed registration messages for this manager
Cancelled registrations	Displays the number of canceled registration messages for this manager

Supported Platforms

All

19.23. replication-segment

replication-segment

Syntax

replication-segment [root-address ip-address] [tree-id tree-id] [inst-id instance-id] [origin {Static | PCEP | SR-Policy}] [detail]

Context

[Tree] (show>router>p2mp-sr-tree>database replication-segment)

Full Contexts

show router p2mp-sr-tree database replication-segment

Description

This command displays the information for the replication segments in the P2MP SR tree database.

Parameters

ip-address—

Displays replication segment information for the root with the specified IPv4 address.

tree-id—

Displays replication segment information for the P2MP SR tree with the specified ID.

Values—

8193 to 16286

instance-id—

Displays replication segment information for the instance with the specified ID.

Values—

0 to 4294967295

origin—

Displays information for policies created using the specified method.

Static—

Displays static policies.

PCEP—

Displays PCEP policies.

SR-Policy—

Displays SR policies.

detail—

Displays detailed information.

Output

The following output is an example of P2MP SR tree database replication segment information.

Sample Output

A:swsim103>show>router>p2mp-sr-tree# database replication-segment

===============================================================================

Replication Segments

===============================================================================

Policy-name

RootAddr TreeId NumNHLFEs Instance

Origin Tunnel Down-Reason State

SID-action InLabel LTN/Local Update-ID

NhId REP-SID Down-Reason State

Nexthop Interface

ProtectNhId REP-SID Down-Reason State

Nexthop Interface

-------------------------------------------------------------------------------

rs-test-100-103

100.0.0.100 9000 1 1000

Static 73731 none inService

pop 30000 False/True 0

N/A N/A --- ---

--- ---

N/A N/A --- ---

--- ---

rs-test-100-103-spmsi

100.0.0.100 9001 0 1000

Static 0 all-nh-down outOfService

swap 30001 False/False 0

N/A N/A --- ---

--- ---

N/A N/A --- ---

--- ---

rs-test-103-100

100.0.0.103 9000 1 1000

Static 73729 none inService

push 0 True/False 0

1 30100, 0, 0, 0* none inService

102.103.1.1 to102port1-1

N/A N/A --- ---

--- ---

rs-test-spmsi-103-100

100.0.0.103 9001 1 1000

Static 0 none inService

push 0 True/False 0

1 30101, 0, 0, 0* none inService

102.103.1.1 to102port1-1

N/A N/A --- ---

--- ---

-------------------------------------------------------------------------------

Total replication segments : 4

Supported Platforms

All

replication-segment

Syntax

replication-segment [segment-name] [inst-id instance-id] [incoming-sid static-label] [origin {Static | PCEP | SR-Policy}] [oper {up | down}] [tree-id root-tree-id] [root-addr ip-address]

Context

[Tree] (show>router>p2mp-sr-tree replication-segment)

Full Contexts

show router p2mp-sr-tree replication-segment

Description

This command displays the information for the specified replication segment of the P2MP SR tree.

Parameters

segment-name—

Specifies the name, up to 32 characters.

instance-id—

Specifies the instance ID.

Values—

0 to 4294967295

static-label—

Specifies the static label ID.

Values—

0 to 4294967295

origin—

Displays information for policies created using the specified method.

Static—

Displays static policies.

PCEP—

Displays PCEP policies.

SR-Policy—

Displays SR policies.

oper up—

Displays replication segments with operational status up.

oper down—

Displays replication segments with operational status down.

root-tree-id—

Specifies the P2MP SR tree ID.

Values—

8193 to 16286

ip-address—

Specifies the root IPv4 address.

Output

The following output is an example of replication segment information.

Sample Output

A:swsim103>show>router>p2mp-sr-tree# replication-segment

===============================================================================

Replication Segments

===============================================================================

Name Origin InstId NumNhIds Adm/Opr

RootAddr TreeId InSID Action

-------------------------------------------------------------------------------

rs-test-100-103 Static 1000 -- Up/Up

100.0.0.100 9000 30000 Pop

rs-test-103-100 Static 1000 1 Up/Up

100.0.0.103 9000 -- Push

rs-test-100-103-spmsi Static 1000 -- Up/Down

100.0.0.100 9001 30001 Swap

rs-test-spmsi-103-100 Static 1000 1 Up/Up

100.0.0.103 9001 -- Push

-------------------------------------------------------------------------------

Total Replication Segments : 4

Supported Platforms

All

19.24. request

request

Syntax

request aps-id {protect | working}

Context

[Tree] (tools>perform>aps request)

Full Contexts

tools perform aps request

Description

This command requests a manual switch to protection or working circuit.

Parameters

aps-id—

Specifies the APS ID.

Values—

aps-id	aps-group-id
	aps	keyword
	group-id	1 to 128

protect—

This command requests a manual switch to a port that is acting as the protection circuit for the APS group.

working—

This command requests a manual switch to a port that is acting as the working circuit for this APS group.

Supported Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e

19.25. requirements

requirements

Syntax

requirements [detail]

Context

[Tree] (show>chassis>power-management requirements)

Full Contexts

show chassis power-management requirements

Description

This command displays maximum power requirements for the installed devices.

Parameters

detail—

Displays detailed information.

Output

The following output is an example of power management requirements information, and Table 391 describes the output fields.

Sample Output: show chassis power-management requirements

*A:Dut-A# show chassis power-management requirements

===============================================================================

Chassis Power Zone 1 Requirements

===============================================================================

SUPPLY REQUIREMENTS

Power Capacity : 88000.00 Watts Chassis/Fan : 8600.00 Watts ( 10%)

IO Module : 2028.00 Watts ( 2%)

CPM Module : 450.00 Watts ( 1%)

Fabric Module : 2120.00 Watts ( 2%)

MDA Module : 11810.00 Watts ( 13%)

XIOM Module : 1926.00 Watts ( 2%)

Mode : basic Total Required: 26934.00 Watts ( 31%)

Reserved Power : 4400.00 Watts Safety Level : 26934.00 Watts (100%)

Reqd. + Reserve : 31334.00 Watts ( 36%) Safety Alert : N/A

Remaining Power : 56666.00 Watts Alert Level : N/A

===============================================================================

*A:Dut-A# show chassis power-management requirements detail

===============================================================================

Chassis Power Zone 1 Requirements (detail)

===============================================================================

SUPPLY REQUIREMENTS

Power Capacity : 88000.00 Watts Chassis/Fan

Power Module 1/1 : 4400.00 Watts 1/1 : 1075.00 Watts ( 1%)

Power Module 1/2 : 4400.00 Watts 1/2 : 1075.00 Watts ( 1%)

Power Module 1/3 : 4400.00 Watts 1/3 : 1075.00 Watts ( 1%)

Power Module 1/4 : 4400.00 Watts 1/4 : 1075.00 Watts ( 1%)

Power Module 1/5 : 4400.00 Watts 1/5 : 1075.00 Watts ( 1%)

Power Module 1/6 : 4400.00 Watts 1/6 : 1075.00 Watts ( 1%)

Power Module 1/7 : 4400.00 Watts 1/7 : 1075.00 Watts ( 1%)

Power Module 1/8 : 4400.00 Watts 1/8 : 1075.00 Watts ( 1%)

Power Module 1/9 : 4400.00 Watts IO Module

Power Module 1/10: 4400.00 Watts Slot 1 : 551.00 Watts ( 1%)

Power Module 2/1 : 4400.00 Watts Slot 2 : 373.00 Watts ( 0%)

Power Module 2/2 : 4400.00 Watts Slot 3 : 609.00 Watts ( 1%)

Power Module 2/3 : 4400.00 Watts Slot 4 : 270.00 Watts ( 0%)

Power Module 2/4 : 4400.00 Watts Slot 5 : 225.00 Watts ( 0%)

Power Module 2/5 : 4400.00 Watts CPM Module

Power Module 2/6 : 4400.00 Watts Slot A : 225.00 Watts ( 0%)

Power Module 2/7 : 4400.00 Watts Slot B : 225.00 Watts ( 0%)

Power Module 2/8 : 4400.00 Watts Fabric Module

Power Module 2/9 : 4400.00 Watts Sfm 1 : 265.00 Watts ( 0%)

Power Module 2/10: 4400.00 Watts Sfm 2 : 265.00 Watts ( 0%)

Sfm 3 : 265.00 Watts ( 0%)

Sfm 4 : 265.00 Watts ( 0%)

Sfm 5 : 265.00 Watts ( 0%)

Sfm 6 : 265.00 Watts ( 0%)

Sfm 7 : 265.00 Watts ( 0%)

Sfm 8 : 265.00 Watts ( 0%)

MDA Module

MDA 1/1 : 1555.00 Watts ( 2%)

MDA 1/2 : 1555.00 Watts ( 2%)

MDA 2/1 : 1200.00 Watts ( 1%)

MDA 2/2 : 1200.00 Watts ( 1%)

MDA 3/1 : 2400.00 Watts ( 3%)

MDA 3/2 : 2400.00 Watts ( 3%)

MDA 4/1 : 600.00 Watts ( 1%)

MDA 4/x2/1 : 150.00 Watts ( 0%)

MDA 4/x2/2 : 150.00 Watts ( 0%)

MDA 5/x1/1 : 150.00 Watts ( 0%)

MDA 5/x1/2 : 150.00 Watts ( 0%)

MDA 5/x2/1 : 150.00 Watts ( 0%)

MDA 5/x2/2 : 150.00 Watts ( 0%)

XIOM Module

XIOM 4/x2 : 642.00 Watts ( 1%)

XIOM 5/x1 : 642.00 Watts ( 1%)

XIOM 5/x2 : 642.00 Watts ( 1%)

Mode : basic Total Required: 26934.00 Watts ( 31%)

Reserved Power : 4400.00 Watts Safety Level : 26934.00 Watts (100%)

Reqd. + Reserve : 31334.00 Watts ( 36%) Safety Alert : N/A

Remaining Power : 56666.00 Watts Alert Level : N/A

===============================================================================

Table 391: Output Fields: show chassis power-management requirements

Label	Description
SUPPLY
Power Capacity	Specifies the total amount of power available to the chassis.
Safety Level	Specifies the configured Power Safety Level, which is a percentage of the worst case power consumption level.
Alert Level	Specifies the configured power level in Watts, which causes the system to raise an alarm if the available power level drops below a set level.
Mode	Specifies the configured mode: none, basic, advanced.
Reserved Power	Signifies the amount of power in reserve. For basic and advanced modes, the system keeps an additional margin of reserve power capacity. This margin is the provisioned capacity of the highest-rated power module. In advanced mode, the system will shed load to always keep this amount of power in reserve. In basic mode, it won’t shed load to maintain the reserve, but it only allows cards or MDAs to load as long as the reserve power margin can be maintained.
Reqd. + Reserve	Specifies the Safety Level (Watts) + Reserved Power.
Remaining Power	Specifies the excess capacity. It is equal to (“Power Capacity” - “Reqd + Reserve”).
REQUIREMENTS
Fan	Specifies the amount of power required for each fan tray.
IO Module	Specifies the amount of power required for each IO Module.
CPM Module	Specifies the amount of power required for each CPM.
Fabric Module	Specifies the amount of power required for each SFM.
MDA Module	Specifies the amount of power required for each line card.
Total Required	Specifies the total amount of power required for all system elements.
Safety Level	Specifies the percentage configured with configure system power-management power-safety-level percent. This is a percentage of the total system requirement (Total Required). The corresponding value in Watts is also shown for information.
Safety Alert	Specifies the output of configure system power-management power-safety-alert wattage. A non-zero value indicates that the user wants to receive a warning when the system power capacity drops to within this number of Watts of the system level. If the power safety is 0, “N/A” is displayed in the output since no alert will be produced.
Alert Level	Specifies the value when the safety alert will be issued (= safety-level + safety alert). If the power safety alert is 0, “N/A” is displayed in the output since no alert will be produced.

Supported Platforms

7750 SR-s, 7950 XRS

19.26. reset

reset

Syntax

reset bundle-id

Context

[Tree] (tools>perform>ima reset)

Full Contexts

tools perform ima reset

Description

This command sets an IMA-bundle to the Start Up state.

Parameters

bundle-id—

Specifies an existing bundle ID.

Values—

bundle-ima-slot/mda.bundle-num

bundle-num: 1 to 256

Supported Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-a, 7750 SR-e, 7950 XRS

19.27. resignal

resignal

Syntax

resignal {lsp lsp-name path path-name | delay minutes}

resignal {p2mp-lsp p2mp-lsp-name p2mp-instance p2mp-instance-name | p2mp-delay p2mp-minutes}

resignal {sr-te-lsp sr-te-lsp-name path path-name | sr-te-delay sr-te-minutes}

Context

[Tree] (tools>perform>router>mpls resignal)

Full Contexts

tools perform router mpls resignal

Description

This command resignals a specific path of a RSVP-TE P2P LSP, a RSVP P2MP LSP tree, or a SR-TE LSP. When an lsp-name and path-name are provided, a manual resignal is performed for the named path of the named LSP only. In this case, the new path is always programmed in data path regardless of the metric comparison between the new path and the current path.

The delay, p2mp-delay, or the sr-te-delay parameters override the global resignal timer value of all LSPs of the corresponding type for resignal. At the expiry of this override timer, the procedures of the timer based resignal are applied to all LSPs of the corresponding type. The resignal timer is then reset to its configured value in MPLS configuration. In this case, the new path is programmed in data path only if the metric of the new path is different from one of the current path.

Parameters

lsp lsp-name—

Specifies an existing LSP name, up to 64 characters in length, to resignal.

path path-name—

Specifies an existing path name to resignal.

delay minutes—

Configures an override of the global resignal timer or all RSVP-TE P2P LSPs.

Values—

0 to 30

p2mp-lsp p2mp-lsp-name—

Specifies an existing point-to-multipoint RSVP-TE LSP name, up to 64 characters, to resignal.

p2mp-instance p2mp-instance-name—

Specifies a name, up to 32 characters, that identifies the P2MP LSP instance.

p2mp-delay p2mp-minutes—

Configures an override of the global resignal timer or all RSVP-TE P2MP LSPs.

Values—

0 to 60

sr-te-delay sr-te-minutes—

Configures an override of the global resignal timer or all SR-TE LSPs.

Values—

0 to 30

sr-te-lsp sr-te-lsp-name—

Specifies the name of a SR-TE LSP to resignal. The name must be 64 characters maximum.

Supported Platforms

All

19.28. resignal-bypass

resignal-bypass

Syntax

resignal-bypass {lsp bypass-lsp-name [force] | delay minutes}

Context

[Tree] (tools>perform>router>mpls resignal-bypass)

Full Contexts

tools perform router mpls resignal-bypass

Description

This command performs a manual re-optimization of a specific dynamic or manual bypass LSP, or of all dynamic bypass LSPs.

The name of a manual bypass LSP is the one provided by the user at configuration time. The name of a dynamic bypass LSP is shown in the output of show>router>mpls>bypass-tunnel dynamic detail.

The delay option triggers the global re-optimization of all dynamic bypass LSPs at the expiry of the specified delay. Effectively, this option forces the global bypass resignal timer to expire after an amount of time equal to the value of the delay parameter. This option has no effect on a manual bypass LSP.

However, when bypass-lsp-name is specified, the named dynamic or manual bypass LSP is signaled and the associations are moved only if the new bypass LSP path has a lower cost than the current one. This behavior is different from that of the similar command for the primary or secondary active path of an LSP, which signals and switches to the new path regardless of the cost comparison. This handling is required because a bypass LSP may have a large number of PSB associations and the processing churn is much higher.

In the specific case where the name corresponds to a manual bypass LSP, the LSP is torn down and resignaled using the new path provided by CSPF if no PSB associations exist. If one or more PSB associations exist but no PLR is active, the command fails and the user is required to explicitly enter the force option. In this case, the manual bypass LSP is torn down and resignaled, leaving temporarily the associated LSP primary paths unprotected. If one or more PLRs associated with the manual bypass LSP is active, the command fails.

Finally, and as with the timer based resignal, the PSB associations are checked for the SRLG and admin group constraints using the updated information provided by CSPF for the current path and new path of the bypass LSP.

Parameters

lsp bypass-lsp-name [force]—

Specifies the name of the dynamic or manual bypass LSP. The force option is required when the name corresponds to a manual bypass LSP and the LSP has PSB associations.

delay minutes—

Specifies the time, in minutes, MPLS waits before attempting to re-signal dynamic bypass LSP paths originated on the system.

Values—

0 to 30

Supported Platforms

All

19.29. resource-failures

resource-failures

Syntax

resource-failures

Context

[Tree] (clear>router>ldp resource-failures)

Full Contexts

clear router ldp resource-failures

Description

This command clears resource overload status in the LDP instance.

Supported Platforms

All

19.30. resource-usage

resource-usage

Syntax

resource-usage

Context

[Tree] (tools>dump resource-usage)

Full Contexts

tools dump resource-usage

Description

Commands in this context display system resource information, such as policers, including data for total, available, and free numbers for each resource.

Supported Platforms

All

19.31. resources

resources

Syntax

resources

Context

[Tree] (tools>dump>filter resources)

Full Contexts

tools dump filter resources

Description

Commands in this context display filter resources utilization

Supported Platforms

All

resources

Syntax

resources mda mda-id

Context

[Tree] (tools>dump>nat>isa resources)

Full Contexts

tools dump nat isa resources

Description

This command enables dump ISA resources for an MDA.

Output

The following is sample output for this command.

Sample Output

AR12_PPPOE# tools dump nat isa resources mda 3/1

Resource Usage for Slot #3 Mda #1:

| Total | Allocated | Free

-------------------------------+--------------+--------------+--------------

Flows | 6291456 | 0 | 6291456

Policies | 256 | 2 | 254

Port-ranges | 1310720 | 128 | 1310592

Ports | 12884901888 | 0 | 12884901888

IP-addresses | 65536 | 1 | 65535

Large-scale hosts | 524288 | 0 | 524288

L2-aware subscribers | 65536 | 0 | 65536

L2-aware hosts | 65536 | 0 | 65536

Delayed ICMP's | 200 | 0 | 200

ALG session | 1572864 | 0 | 1572864

LI entries | 8191 | 0 | 8191

Upstream fragment lists | 16384 | 0 | 16384

Downstream fragment lists | 16384 | 0 | 16384

Upstream fragment holes | 131072 | 0 | 131072

Downstream fragment holes | 131072 | 0 | 131072

Upstream fragment bufs | 13824 | 0 | 13824

Downstream fragment bufs | 13824 | 0 | 13824

flow log dest. set 0 | 2 | 0 | 2

flow log packets set 0 | 50 | 0 | 50

flow log dest. set 1 | 2 | 0 | 2

flow log packets set 1 | 50 | 0 | 50

flow log dest. set 2 | 1 | 0 | 1

flow log packets set 2 | 50 | 0 | 50

A:SR12_PPPOE#

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-e, 7750 SR-s, VSR

19.32. restart

restart

Syntax

restart brg-id brg-ident

Context

[Tree] (tools>perform>subscr-mgmt>pppoe-client restart)

Full Contexts

tools perform subscriber-mgmt vrgw brg pppoe-client restart

Description

This command forcibly restarts the PPPoE client linked to the BRG instance. The restart does not remove BRG or related session state, however, forwarding is impacted.

Parameters

brg-ident—

The string identifying the BRG.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

19.33. retailers

retailers

Syntax

retailers

Context

[Tree] (show>service>id retailers)

Full Contexts

show service id retailers

Description

This command displays service retailer information.

Output

The following output displays an example of service retailer information.

Sample Output

*A:ALA-48>config# show service id 101 retailers

===============================================================================

Retailers for service 101

===============================================================================

Retailer Svc ID Num Static Hosts Num Dynamic Hosts

-------------------------------------------------------------------------------

102 3 1

105 0 1

-------------------------------------------------------------------------------

Number of retailers : 2

===============================================================================

*A:ALA-48>config#

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

19.34. revert

revert

Syntax

revert [lsp lsp-name]

Context

[Tree] (tools>perform>router>mpls revert)

Full Contexts

tools perform router mpls revert

Description

Use this command to cause a named LSP, which is currently using a secondary path and for which the revert-timer has been configured, to switch back to using the primary path. Any outstanding revert-timer is canceled.

The primary path must be up for this command to be successful.

Parameters

lsp-name—

Specifies an existing LSP name, up to 64 characters in length.

Supported Platforms

All

19.35. rib-api

rib-api

Syntax

rib-api

Context

[Tree] (show>router rib-api)

Full Contexts

show router rib-api

Description

This command displays RIB-API protocol entities information.

Supported Platforms

All

rib-api

Syntax

rib-api

Context

[Tree] (clear>router rib-api)

Full Contexts

clear router rib-api

Description

This command clears RIB-API protocol entities information.

Supported Platforms

All

rib-api

Syntax

rib-api

Context

[Tree] (tools>dump>router rib-api)

Full Contexts

tools dump router rib-api

Description

This command configures the dump tools for RIB-API protocol instance.

Supported Platforms

All

19.36. ring

ring

Syntax

ring peer ip-address ring sync-tag

Context

[Tree] (clear>redundancy>multi-chassis>mcr>statistics ring)

Full Contexts

clear redundancy multi-chassis mc-ring statistics ring

Description

This command clears multi-chassis ring statistics.

Parameters

ip-address—

Clears ring statistics for the specified IP address.

Values—

ipv4-address: a.b.c.d

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x – [0 to FFFF] H
d – [0 to 255] D

sync-tag—

Clears ring statistics for the specified sync tag. 32 characters maximum.

Supported Platforms

All

19.37. ring-node

ring-node

Syntax

ring-node peer ip-address ring sync-tag node ring-node-name

Context

[Tree] (clear>redundancy>multi-chassis>mcr>statistics ring-node)

Full Contexts

clear redundancy multi-chassis mc-ring statistics ring-node

Description

This command clears multi-chassis ring statistics.

Parameters

ip-address—

Clears ring-node peer statistics for the specified IP address.

Values—

ipv4-address: a.b.c.d

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x – [0 to FFFF] H
d – [0 to 255] D

sync-tag—

Clears ring-node peer statistics for the specified synchronization tag. The tag can be up to 32 characters.

ring-node-name—

Clears ring-node peer statistics for the specified ring node name. The ring node name can be up to 32 characters.

Supported Platforms

All

19.38. ring-nodes

ring-nodes

Syntax

ring-nodes peer ip-address ring sync-tag

Context

[Tree] (clear>redundancy>multi-chassis>mcr ring-nodes)

Full Contexts

clear redundancy multi-chassis mc-ring ring-nodes

Description

This command clears multi-chassis ring unreferenced ring nodes.

Parameters

ip-address—

Clears ring statistics for the specified IP address.

Values—

ipv4-address: a.b.c.d

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x – [0 to FFFF] H
d – [0 to 255] D

sync-tag—

Clears ring statistics for the specified sync tag.

Supported Platforms

All

19.39. rip

rip

Syntax

rip

Context

[Tree] (clear>router rip)

Full Contexts

clear router rip

Description

Commands in this context clear and reset RIP protocol entities.

Supported Platforms

All

rip

Syntax

rip

Context

[Tree] (show>router rip)

Full Contexts

show router rip

Description

Displays RIP information.

Supported Platforms

All

19.40. ripng

ripng

Syntax

ripng

Context

[Tree] (clear>router ripng)

Full Contexts

clear router ripng

Description

Commands in this context clear and reset RIP-NG protocol entities.

Supported Platforms

All

ripng

Syntax

ripng

Context

[Tree] (show>router ripng)

Full Contexts

show router ripng

Description

Commands in this context display RIP-NG related information.

Supported Platforms

All

19.41. rollback

rollback

Syntax

rollback [rescue]

Context

[Tree] (show>system rollback)

Full Contexts

show system rollback

Description

This command displays rollback configuration and state.

Parameters

rescue—

Specifies the rescue configuration.

Output

The following output is an example of system rollback information.

Sample Output

A:dut-a_a># show system rollback

===============================================================================

Rollback Information

===============================================================================

Rollback Location : cf1:/Rollback

Save

Last Rollback Save Result : In Progress, Successful or Failed

Last Save Completion Time : 10/15/2010 21:24:06

Revert

In Progress : Yes, No

Last Revert Initiated Time : 10/15/2010 21:26:23

Last Revert Initiated User : xyz

Last Initiated Checkpoint : cf1:/Rollback.rb.3

Last Completed Revert Result : Successful or Failed

Last Revert Completion Time : 10/15/2010 21:27:19

================================================================================

Rollback Files

================================================================================

Idx Suffix Creation time Release User

Comment

--------------------------------------------------------------------------------

latest .rb 2010/10/15 21:24:02 9.0.R4 fred

This checkpoint was saved after the 3 VPLS services were created

1 .rb.1 2010/10/15 21:23:58 9.0.R4 John

John’s checkpoint on Sunday

2 .rb.2 2010/10/15 21:23:52 9.0.R4 admin

A long checkpoint comment that an operator is using to summarize

various some of the changes that were made. They may even have so

much to say that they use the maximum comment size. Notice that

words are not chopped.

…

9 .rb.9 2010/10/14 22:00:01 9.0.R4 admin

VPLS services 1000-2000 created

…

53 .rb.53 2010/10/14 22:10:10 9.0.R4 admin

--------------------------------------------------------------------------------

No. of Rollback Files: 10

================================================================================

Supported Platforms

All

19.42. root-objects

root-objects

Syntax

root-objects

Context

[Tree] (show>service>dynsvc root-objects)

Full Contexts

show service dynamic-services root-objects

Description

This command displays the root objects created by dynamic data services.

Output

The following output is an example of dynamic services root object information.

Sample Output

# show service dynamic-services root-objects

===============================================================================

Dynamic Service Root Objects

===============================================================================

OID prefix : svcRowStatus

OID index : .100000

Snippet name : vprn

Snippet instance : VRF-1

Orphan time : N/A

-------------------------------------------------------------------------------

No. of Root Objects: 1

===============================================================================

Table 392 describes the Root Objects fields.

Table 392: Root Objects Field Descriptions

Output field	Description
OID prefix	The corresponding SNMP OID prefix for this root object.
OID index	The corresponding SNMP OID index for this root object.
Snippet name	The name of the python function that created this root object. The name is set to N/A when the root-object is orphaned.
Snippet instance	The instance for which the python function with “Snippet name” created this root object. If the snippet is a result from a dynamic reference, then the snippet instance is the reference-id string passed in the dyn.reference(). If the snippet is not the result from a dynamic reference, then the snippet instance is the dynamic data service SAP-ID. The instance is set to N/A when the root object is orphaned.
Orphan time	The timestamp when the root-object became orphaned (root-object not deleted when corresponding teardown function is called) or N/A if the root-object is not orphaned.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

root-objects

Syntax

root-objects

Context

[Tree] (show>service>vsd root-objects)

Full Contexts

show service vsd root-objects

Description

This command displays the root objects created by vsd.

Output

Sample Output

*A:PE1# show service vsd root-objects

===============================================================================

VSD Dynamic Service Root Objects

===============================================================================

OID Prefix : svcRowStatus

OID index : .64000

Snippet name : script

Snippet instance : L2-DOMAIN-5

Orphan time : N/A

-------------------------------------------------------------------------------

No. of Root Objects: 1

===============================================================================

Supported Platforms

All

19.43. route

route

Syntax

route [family] [ip-prefix/prefix-length] [detail]

route next-hop {ip-address | ipv6-address} [detail]

Context

[Tree] (show>router>rib-api route)

Full Contexts

show router rib-api route

Description

This command displays RIB-API route information.

Parameters

family—

Specifies the IPv4 or IPv6 address route family.

Values—

ipv4, ipv6

ip-prefix/prefix-length—

Displays RIB-API route entries only matching the specified IP prefix and length.

Values—

ipv4-prefix:	a.b.c.d (host bits must be 0)
ipv4-prefix-length	0 to 32
ipv6-prefix:	x:x:x:x:x:x:x:x (eight 16-bit pieces)
	x:x:x:x:x:x:d.d.d.d
	x:	[0 to FFFF]H
	d:	[0 to 255]D
	ipv6-prefix-length:	0 to 128

detail—

Displays detailed RIB-API route information.

ip-address—

Specifies the next-hop IPv4 address of the RIB-API route.

Values—

ipv4-address:

a.b.c.d

ipv6-address—

Specifies the next-hop IPv6 address of the RIB-API route.

Values—

ipv6-address:	x:x:x:x:x:x:x:x (eight 16-bit pieces)
	x:x:x:x:x:x:d.d.d.d
	x:	[0 to FFFF]H
	d:	[0 to 255]D

Output

The following output is an example of RIB-API route information.

Sample Output

*A:Dut-A# /show router rib-api route

==============================================================================

RibApi Route Table (Router: Base) Family: IPv4

==============================================================================

Prefix Rib-Api Client IP Act

Next Hop Pref

------------------------------------------------------------------------------

100.0.0.0/8 182 10.254.135.92 N

10.20.1.3

101.0.0.0/8 182 10.254.135.92 Y

10.21.1.3

------------------------------------------------------------------------------

No. of Rib-Api Routes: 2

==============================================================================

*A:Dut-A# /show router rib-api route detail

===============================================================================

RibApi Route Table (Router: Base) Family: IPv4

===============================================================================

Prefix : 100.0.0.0/8

Client IP : 10.254.135.92

Client Tag : 4 Stale client : N

Metric : 61130 RTM Preference : 171

Rib-Api Pref : 182

Last Updated : 02/07/2020 23:44:17

Nexthop : 10.20.1.3

Active In RTM : N

Inactive Reason : Next-hop not resolved or no usable tunnels

-------------------------------------------------------------------------------

Prefix : 101.0.0.0/8

Client IP : 10.254.135.92

Client Tag : 4 Stale client : N

Metric : 61130 RTM Preference : 171

Rib-Api Pref : 182

Last Updated : 02/07/2020 23:44:44

Nexthop : 10.21.1.3

Active In RTM : Y

Inactive Reason : Not Applicable

-------------------------------------------------------------------------------

No. of Rib-Api Routes: 2

===============================================================================

*A:Dut-A#

Table 393: RIB-API Route Fields

Label	Description
Family	The route family: ipv4 ipv6
Prefix	The IP prefix for the route RTM entry
Rib-Api Pref	The RIB-API preference opposing to the routes from different clients with the same prefix
Client IP	The IP address of the gRPC client that configured the RIB-API route entry
Act	The boolean (YES or NO) that indicates whether the status of the RIB-API route in RTM is active or not
Next Hop	The next-hop IP address of the RIB-API route entry
No. of Rib-Api Routes	The total number of the displayed RIB-API routes
Client Tag	The client tag unique identifier assigned to each gRPC connection by the gRPC server
Stale client	The stale client (Y or N) that indicates if the route is from a disconnected gRPC client
Metric	The metric of the route
RTM Preference	The RTM preference opposing to the routes having the same prefix from different protocols (BGP, OSPF)
Last Updated	The time stamp of when the route was added or modified from a gRPC client
Nexthop	The next-hop IP address of the RIB-API route entry
Active In RTM	The boolean (Y or N) that indicates whether the status of the RIB-API route is active or not in RTM
Inactive Reason	The inactive reason or the route not active in RTM

Supported Platforms

All

19.44. route-downloader

route-downloader

Syntax

route-downloader route-downloader-name [router router-instance | service-name service-name] [family family]

Context

[Tree] (clear>aaa route-downloader)

Full Contexts

clear aaa route-downloader

Description

This command clears all the radius-downloaded routes from the internal downloader cache (or protocol RIB/db) (and thus eventually from the RTM itself). The parameters vprn and/or family allow to restrict the deletion of those routes learned in a particular address family (IPv4 or IPv6) and/or a particular VPRN.

By default, all VPRNs and both IPv4 and IPv6 families are affected.

Note:

Clearing the internal protocol DB means the corresponding prefixes that were deleted should be removed from the RTM (and from any other exports) as well.

Parameters

route-downloader-name—

Specifies the route downloader name, up to 32 characters.

router-instance—

Specifies the router instance name (Base) or service ID.

service-name—

Specifies the configured service name for the routing instance, up to 64 characters

family—

Specifies to limit he removal or prefixes only belonging to the address family IPv4 or IPv6. Only these two values are accepted.

Values—

ipv4, ipv6

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

route-downloader

Syntax

route-downloader

Context

[Tree] (tools>perform>aaa route-downloader)

Full Contexts

tools perform aaa route-downloader

Description

Commands in this context configure route downloader parameters.

Supported Platforms

7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, VSR

19.45. route-next-hop-policy

route-next-hop-policy

Syntax

route-next-hop-policy

Context

[Tree] (show>router route-next-hop-policy)

Full Contexts

show router route-next-hop-policy

Description

This command displays route next-hop policies related information.

Supported Platforms

All

19.46. route-table

route-table

Syntax

route-table [family] [ip-prefix[/prefix-length] [longer | exact | protocol protocol-name] [all] [next-hop-type type] [qos] [alternative] [accounting-class]

route-table [family] [summary]

route-table tunnel-endpoints [ip-prefix[/prefix-length] [longer | exact] [detail]

route-table [family] [ip-prefix[/prefix-length] [longer | exact | protocol protocol-name] extensive [all]

Context

[Tree] (show>router route-table)

Full Contexts

show router route-table

Description

This command displays the active routes in the routing table.

If no command line arguments are specified, all routes are displayed, sorted by prefix.

Parameters

family—

Specifies the family.

Values—

ipv4, ipv6, mcast-ipv4, mcast-ipv6

ip-prefix[/prefix-length]—

Displays routes only matching the specified ip-prefix and optional mask.

Values—

ipv4-prefix: a.b.c.d (host bits must be 0)

ipv4-prefix-le: 0 to 32

ipv6-prefix:

x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF] H
d: [0 to 255] D

ipv6-prefix-le: 0 to 128

longer—

Displays routes matching the ip-prefix/mask and routes with longer masks.

exact—

Displays the exact route matching the ip-prefix/mask masks.

protocol-name—

Displays routes learned from the specified protocol.

The following values apply to the 7750 SR and the 7450 ESS:

Values—

local, host, sub-mgmt, managed, static, ldp, ospf, ospf3, isis, rip, bgp, bgp-vpn, bgp-evpn, aggregate, vpn-leak, tms, nat, periodic, dhcpv6-pd, dhcpv6-na, dhcpv6-ta, dhcpv6-pd-excl, ripng, ipsec, bgp-label

The following values apply to the 7950 XRS:

Values—

local, host, managed, static, ldp, ospf, ospf3, isis, rip, bgp, bgp-vpn, bgp-evpn, aggregate, vpn-leak, dhcpv6-pd, dhcpv6-na, dhcpv6-ta, dhcpv6-pd-excl, ripng, bgp-label, ipv4, ipv6, mcast-ipv4, mcast-ipv6

all—

Includes inactive routes.

type—

Displays only the tunneled next-hops. For each route entry, the tunnel owner and tunnel ID is shown.

Values—

tunneled

qos—

Specifies to display QoS active routes in the routing table.

alternative—

Displays LFS and backup route details.

accounting-class—

Specifies to display accounting class information.

summary—

Displays a route table summary information.

tunnel-endpoints—

Specifies to include tunnel endpoint information.

extensive—

Displayed detailed information.

Output

The following output is an example of standard route table information, and Table 394 describes the output fields.

Sample Output

The following output is an example showing that NAT routes are visible in the routing table.

*A:Dut-C# /show router 101 route-table

===============================================================================

Route Table (Service: 101)

===============================================================================

Dest Prefix[Flags] Type Proto Age Pref

Next Hop[Interface Name] Metric

-------------------------------------------------------------------------------

11.11.11.0/24 Local Local 00h22m33s 0

toIxia2.101 0

160.0.0.0/16 Remote Static 00h22m30s 5

11.11.11.8 1

200.0.0.0/16 Remote NAT 00h02m20s 0

NAT inside 0

200.1.0.0/16 Remote NAT 00h02m20s 0

NAT inside 0

210.0.1.0/24 Remote NAT 00h02m20s 0

NAT inside 0

210.1.1.0/24 Remote NAT 00h02m20s 0

NAT inside 0

210.6.1.0/24 Remote NAT 00h02m20s 0

NAT inside 0

210.7.1.0/24 Remote NAT 00h02m20s 0

NAT inside 0

-------------------------------------------------------------------------------

No. of Routes: 8

Flags: n = Number of times nexthop is repeated

B = BGP backup route available

L = LFA nexthop available

S = Sticky ECMP requested

===============================================================================

*A:Dut-C#

The following output shows standard route table information.

*A:ALA-12# show router 3 route-table 10.10.0.4

===============================================================================

Route Table

==============================================================================

Dest Address Next Hop Type Protocol Age Metric Pref

------------------------------------------------------------------------------

10.10.0.4/32 10.10.34.4 Remote OSPF 3523 1001 10

------------------------------------------------------------------------------

*A:ALA-12#

*A:ALA-12# show router 3 route-table 10.10.0.4/32 longer

==============================================================================

Route Table

==============================================================================

Dest Address Next Hop Type Protocol Age Metric Pref

------------------------------------------------------------------------------

10.10.0.4/32 10.10.34.4 Remote OSPF 3523 1001 10

------------------------------------------------------------------------------

No. of Routes: 1

==============================================================================

+ : indicates that the route matches on a longer prefix

*A:ALA-12#

*A:ALA-12# show router 3 route-table protocol ospf

==============================================================================

Route Table

==============================================================================

Dest Address Next Hop Type Protocol Age Metric Pref

------------------------------------------------------------------------------

10.10.0.1/32 10.10.13.1 Remote OSPF 65844 1001 10

10.10.0.2/32 10.10.13.1 Remote OSPF 65844 2001 10

10.10.0.4/32 10.10.34.4 Remote OSPF 3523 1001 10

10.10.0.5/32 10.10.35.5 Remote OSPF 1084022 1001 10

10.10.12.0/24 10.10.13.1 Remote OSPF 65844 2000 10

10.10.15.0/24 10.10.13.1 Remote OSPF 58836 2000 10

10.10.24.0/24 10.10.34.4 Remote OSPF 3523 2000 10

10.10.25.0/24 10.10.35.5 Remote OSPF 399059 2000 10

10.10.45.0/24 10.10.34.4 Remote OSPF 3523 2000 10

-------------------------------------------------------------------------------

*A:ALA-12#

*A:ALA-12# show router 3 route-table summary

===============================================================================

Route Table Summary

===============================================================================

Active Available

-------------------------------------------------------------------------------

Static 1 1

Direct 6 6

BGP 0 0

OSPF 9 9

ISIS 0 0

RIP 0 0

Aggregate 0 0

-------------------------------------------------------------------------------

Total 15 15

===============================================================================

*A:ALA-12#

Table 394: Standard Show Route Table Field Descriptions

Label	Description
Dest Address	The route destination address and mask.
Next Hop [Interface Name]	The next hop interface name
Next Hop	The next hop IP address for the route destination.
Type	Local — The route is a local route. Remote — The route is a remote route.
Protocol	The protocol through which the route was learned.
Age	The route age in seconds for the route.
Metric	The route metric value for the route.
Pref	The route preference value for the route.
No. of Routes	The number of routes displayed in the list.

The following is a sample output of the show router router-instance route-table all command for a VPRN on the standby PE for prefix 10.13.1.0/24.

Sample Output

*A:ALA-12# show router 1 route-table 10.13.1.0/24 all

===============================================================================

Route Table (Service: 1)

===============================================================================

Dest Prefix[Flags] Type Proto Age Pref

Next Hop[Interface Name] Active Metric

-------------------------------------------------------------------------------

10.13.1.0/24 [E] Remote BGP 00h01m44s 170

10.3.1.1 N 0

10.13.1.0/24 Remote BGP VPN 00h01m19s 170

10.15.1.100 (tunneled) Y 0

===============================================================================

Supported Platforms

All

route-table

Syntax

route-table [family] [ip-prefix/prefix-length] [longer | exact | protocol protocol-name] [all] [next-hop-type type] [qos] [alternative] [accounting-class]

route-table [family] summary

route-table tunnel-endpoints [ip-prefix/prefix-length] [longer | exact] [detail]

route-table [family] [ip-prefix/prefix-length] [longer | exact | protocol protocol-name] extensive [all]

Context

[Tree] (show>router>route-table route-table)

Full Contexts

show router route-table route-table

Description

This command displays route-table information.

Parameters

family—

Specifies the type of routing information to be distributed by the BGP instance.

ipv4 — Displays only those BGP peers that have the IPv4 family enabled and not those capable of exchanging IP-VPN routes.

mcast-ipv4 — Displays the BGP peers that are mcast-ipv4 capable.

ipv6 — Displays the BGP peers that are IPv6 capable.

mcast-ipv6 — Displays the BGP peers that are mcast-ipv6 capable.

ip-prefix—

Displays information about the IP prefix for prefix list entry in dotted decimal notation.

Values—

ipv4-prefix:

a.b.c.d (host bits must be 0)

ipv6-address:

x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D

prefix-length—

Specifies prefix length.

ipv4-prefix-length: 0 to 32

ipv6-prefix-length: 0 to 128

longer—

Specifies the prefix list entry matches any route that matches the specified ip-prefix and prefix mask length values equal to or greater than the specified mask.

exact—

Specifies the prefix list entry matches any route that matches the specified ip-prefix and prefix mask length values of the specified mask.

protocol-name—

Specifies the protocol name.

Values—

local, sub-mgmt, managed, static, ldp, ospf, ospf3, isis, rip, bgp, bgp-vpn, bgp-evpn, aggregate, vpn-leak, nat, periodic, dhcpv6-pd, dhcpv6-na, dhcpv6-ta, dhcpv6-pd-excl, ripng, ipsec, bgp-label, host, arp-nd

all—

Displays information about all inactive routes.

alternative—

Displays LFA and backup route details.

detail—

Displays detailed information.

extensive—

Displays extensive route table information.

Output

The following output displays route table information.

Sample Output Show router Route-Table IP address

show router 1 route-table 4.4.1.4/32

===============================================================================

Route Table (Service: 1)

===============================================================================

Dest Prefix[Flags] Type Proto Age Pref

Next Hop[Interface Name] Metric

-------------------------------------------------------------------------------

4.4.1.4/32 Remote BGP VPN 00h00m03s 170

3ffe::a14:102 (tunneled:SR-Policy:917546) 0

-------------------------------------------------------------------------------

show router 1 route-table 3FFE::404:104/128

===============================================================================

IPv6 Route Table (Service: 1)

===============================================================================

Dest Prefix[Flags] Type Proto Age Pref

Next Hop[Interface Name] Metric

-------------------------------------------------------------------------------

3ffe::404:104/128 Remote BGP VPN 00h00m07s 170

3ffe::a14:102 (tunneled:SR-Policy:917546) 0

-------------------------------------------------------------------------------

No. of Routes: 1

Flags: n = Number of times nexthop is repeated

B = BGP backup route available

L = LFA nexthop available

S = Sticky ECMP requested

===============================================================================

show router route-table 180.10.0.1/32

===============================================================================

Route Table (Router: Base)

===============================================================================

Dest Prefix[Flags] Type Proto Age Pref

Next Hop[Interface Name] Metric

-------------------------------------------------------------------------------

180.10.0.1/32 [B][S] Remote BGP 00h00m49s 170

10.10.10.1 0

180.10.0.1/32 [B][S] Remote BGP 00h00m49s 170

10.10.10.5 0

180.10.0.1/32 [B][S] Remote BGP 00h00m49s 170

10.10.10.10 0

-------------------------------------------------------------------------------

No. of Routes: 1

Flags: n = Number of times nexthop is repeated

B = BGP backup route available

L = LFA nexthop available

S = sticky ECMP requested

==============================================================================

*A:vRR>config>router# show router route-table extensive 200.200.200.200/32

Sample Output Show router Route-Table IP Extensive

The following is an example of the show router route-table extensive command output with unequal-cost ECMP BGP routes.

===============================================================================

Route Table (Router: Base)

===============================================================================

Dest Prefix : 200.200.200.200/32

Protocol : BGP

Age : 01h20m41s

Preference : 170

Indirect Next-Hop : 10.0.0.2

QoS : Priority=n/c, FC=n/c

Source-Class : 0

Dest-Class : 0

ECMP-Weight : 9

Resolving Next-Hop : 10.0.0.2

Interface : to_bridge_br2

Metric : 0

ECMP-Weight : N/A

Indirect Next-Hop : 192.0.2.2

QoS : Priority=n/c, FC=n/c

Source-Class : 0

Dest-Class : 0

ECMP-Weight : 5

Resolving Next-Hop : 192.0.2.2

Interface : to_bridge_br3

Metric : 0

ECMP-Weight : N/A

-------------------------------------------------------------------------------

No. of Destinations: 1

===============================================================================

# show router fib 1 extensive 200.200.200.200/32

===============================================================================

FIB Display (Router: Base)

===============================================================================

Dest Prefix : 200.200.200.200/32

Protocol : BGP

Indirect Next-Hop : 10.0.0.2

QoS : Priority=n/c, FC=n/c

Source-Class : 0

Dest-Class : 0

ECMP-Weight : 9

Resolving Next-Hop : 10.0.0.2

Interface : to_bridge_br2

ECMP-Weight : 1

Indirect Next-Hop : 192.0.2.2

QoS : Priority=n/c, FC=n/c

Source-Class : 0

Dest-Class : 0

ECMP-Weight : 5

Resolving Next-Hop : 192.0.2.2

Interface : to_bridge_br3

ECMP-Weight : 1

===============================================================================

Total Entries : 1

===============================================================================

# show router route-table 5.3.0.1/32 extensive

===============================================================================

Route Table (Router: Base)

===============================================================================

Dest Prefix : 5.3.0.1/32

Protocol : BGP

Age : 00h00m59s

Preference : 170

Indirect Next-Hop : 10.0.0.1

QoS : Priority=n/c, FC=n/c

Source-Class : 0

Dest-Class : 0

ECMP-Weight : 1

Resolving Next-Hop : 1.0.0.2 (RSVP tunnel:115)

Metric : 10

ECMP-Weight : 1

Resolving Next-Hop : 1.0.0.2 (RSVP tunnel:61443)

Metric : 10

ECMP-Weight : 1

Indirect Next-Hop : 10.0.0.2

QoS : Priority=n/c, FC=n/c

Source-Class : 0

Dest-Class : 0

ECMP-Weight : 30

Resolving Next-Hop : 1.0.0.3 (RSVP tunnel:94)

Metric : 10

ECMP-Weight : 20

Resolving Next-Hop : 1.0.0.3 (RSVP tunnel:61442)

Metric : 10

ECMP-Weight : 1

-------------------------------------------------------------------------------

No. of Destinations: 1

===============================================================================

19.47. router

router

Syntax

router [router-instance]

router service-name service-name

Context

[Tree] (show router)

Full Contexts

show router

Description

Commands in this context display various types of information for the specified router instance.

Parameters

router-instance—

specifies the router name, CPM router instance, or VPRN service ID.

Values—

router-instance : router name \| vprn-svc-id
	router-name	Base \| management \| cpm-vr-name \| vpls-management
	cpm-vr-name	[32 characters maximum]
	vprn-svc-id	[1..2147483647]

Default—

Base

service-name—

specifies the service name, up to 64 characters.

Output

The following are examples of router information.

Sample Output: show router with PIM and S-PMSI

*A:Dut-D# \show router 100 pim s-pmsi

===============================================================================

PIM RSVP Spmsi tunnels

===============================================================================

P2mp ID Tunnel ID Ext Tunnel Adrs SPMSI Index Num VPN State

SGs

-------------------------------------------------------------------------------

100 61442 10.20.1.4 73919 8 UP

===============================================================================

PIM RSVP Spmsi Interfaces : 1

===============================================================================

*A:Dut-D# \show router 100 pim s-pmsi detail

===============================================================================

PIM RSVP Spmsi tunnels

===============================================================================

P2MP ID : 100 Tunnel ID : 61442

Ext Tunnel Addrs : 10.20.1.4 Spmsi IfIndex : 73919

Number of VPN SGs : 8 Up Time : 0d 00:01:04

VPN Group Address : 203.0.113.0

VPN Source Address : 10.114.1.2

Up Time : 0d 00:01:04 Multistream-Id : 10

State : TX Joined Mdt Threshold : N/A

Join Timer : N/A Holddown Timer : 0d 00:00:54

VPN Group Address : 203.0.113.1

VPN Source Address : 10.114.1.2

Up Time : 0d 00:01:04 Multistream-Id : 10

State : TX Joined Mdt Threshold : N/A

Join Timer : N/A Holddown Timer : 0d 00:00:55

VPN Group Address : 203.0.113.2

VPN Source Address : 10.114.1.2

Up Time : 0d 00:01:04 Multistream-Id : 5

State : TX Joined Mdt Threshold : N/A

Join Timer : N/A Holddown Timer : 0d 00:00:53

Supported Platforms

All

router

Syntax

router [router-instance]

router service-name service-name

Context

[Tree] (tools>dump router)

Full Contexts

tools dump router

Description

This command dumps tools for the router instance.

Parameters

router-instance—

Specifies the router name or service ID used to identify the router instance.

Values—

router-instance	router-name \| vprn-svc-id
	router-name	Base \| Management \| cpm-vr-name \| vpls-management Default: Base
	vprn-svc-id	1 to 2147483647
	cpm-vr-name	32 chars max

service-name—

Specifies the service name used to identify the router instance. 64 characters maximum.

Supported Platforms

All

router

Syntax

router [router-instance]

router service-name service-name

Context

[Tree] (clear router)

Full Contexts

clear router

Description

Clear router commands affect the router instance in which they are entered.

Parameters

router-instance—

Specifies the router name or service ID used to identify the router instance.

Values—

router-instance	router-name \| vprn-svc-id
	router-name	Base \| Management \| cpm-vr-name \| vpls-management Default: Base
	vprn-svc-id	1 to 2147483647
	cpm-vr-name	32 chars max

service-name—

Specifies the service name used to identify the router instance. 64 characters maximum.

Supported Platforms

All

router

Syntax

router

Context

[Tree] (tools>perform router)

Full Contexts

tools perform router

Description

This command enables the tools for the router instance.

Supported Platforms

All

19.48. router-advertisement

router-advertisement

Syntax

router-advertisement

Context

[Tree] (clear>router>autoconfigure router-advertisement)

Full Contexts

clear router autoconfigure router-advertisement

Description

Commands in this context clear router advertisement information.

Supported Platforms

7450 ESS-7, 7750 SR-1, 7750 SR-7, 7750 SR-1e, 7750 SR-s

router-advertisement

Syntax

router-advertisement all

router-advertisement interface interface-name

Context

[Tree] (clear>router router-advertisement)

Full Contexts

clear router router-advertisement

Description

This command clears all router advertisement counters.

Parameters

all—

Clears all router advertisement counters for all interfaces.

interface-name—

Clears router advertisement counters for the specified interface.

Supported Platforms

All

19.49. routes

routes

Syntax

routes

Context

[Tree] (show>service>id>spb routes)

Full Contexts

show service id spb routes

Description

This command displays SPB route information.

Output

The following output is an example of service SPB route information.

Sample Output

*A:Dut-A# show service id 100001 spb routes

================================================================

MAC Route Table

================================================================

Fid MAC Ver. Metric

NextHop If SysID

----------------------------------------------------------------

Fwd Tree: unicast

----------------------------------------------------------------

1 00:10:00:01:00:02 10 10

sap:1/2/2:1.1 Dut-B

1 00:10:00:01:00:03 10 10

sap:1/2/3:1.1 Dut-C

1 00:10:00:01:00:04 10 20

sap:1/2/2:1.1 Dut-B

100 00:10:00:02:00:02 10 10

sap:1/2/2:1.1 Dut-B

100 00:10:00:02:00:03 10 10

sap:1/2/3:1.1 Dut-C

100 00:10:00:02:00:04 10 20

sap:1/2/3:1.1 Dut-C

Fwd Tree: multicast

----------------------------------------------------------------

1 00:10:00:01:00:02 10 10

sap:1/2/2:1.1 Dut-B

1 00:10:00:01:00:03 10 10

sap:1/2/3:1.1 Dut-C

1 00:10:00:01:00:04 10 20

sap:1/2/2:1.1 Dut-B

100 00:10:00:02:00:02 10 10

sap:1/2/2:1.1 Dut-B

100 00:10:00:02:00:03 10 10

sap:1/2/3:1.1 Dut-C

100 00:10:00:02:00:04 10 20

sap:1/2/3:1.1 Dut-C

----------------------------------------------------------------

No. of MAC Routes: 12

================================================================

ISID Route Table

================================================================

Fid ISID Ver.

NextHop If SysID

----------------------------------------------------------------

1 10001 10

sap:1/2/2:1.1 Dut-B

sap:1/2/3:1.1 Dut-C

100 10002 10

sap:1/2/2:1.1 Dut-B

sap:1/2/3:1.1 Dut-C

----------------------------------------------------------------

No. of ISID Routes: 2

================================================================

A:Dut-A# show service id spb fate-sharing

===============================================================================

User service fate-shared sap/sdp-bind information

===============================================================================

Control Control Sap/ FID User User Sap/

SvcId SdpBind SvcId SdpBind

-------------------------------------------------------------------------------

500 1/1/20:500 502 502 1/1/20:502

===============================================================================

Supported Platforms

All

routes

Syntax

routes [ip-prefix] [detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id [hunt]]

routes brief

routes [ip-prefix] bgp-ls [ipv4-prefix | link | node] [hunt]

routes [ip-prefix] evpn auto-disc [as-path-regex reg-exp] [community comm-id] [esi esi] [next-hop ip-address] [rd rd] [tag tag] [detail | hunt]

routes [ip-prefix] evpn eth-seg [as-path-regex reg-exp] [community comm-id] [esi esi] [next-hop ip-address] [originator-ip ip-address] [rd rd] [tag tag] [detail | hunt]

routes [ip-prefix] evpn incl-mcast [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [originator-ip ip-address] [rd rd] [tag tag] [detail | hunt]

routes [ip-prefix] evpn ip-prefix [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [prefix ipv4-prefix] [rd rd] [tag tag] [detail | hunt]

routes [ip-prefix] evpn ipv6-prefix [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [prefix ipv6-prefix] [rd rd] [tag tag] [detail | hunt]

routes [ip-prefix] evpn mac [as-path-regex reg-exp] [community comm-id] [mac-address mac-address] [next-hop ip-address] [rd rd] [tag tag] [detail | hunt]

routes [ip-prefix] evpn mcast-join-synch [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [originator-ip ip-address] [rd rd] [tag tag] [detail | hunt]

routes [ip-prefix] evpn mcast-leave-synch [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [originator-ip ip-address] [rd rd] [tag tag] [detail | hunt]

routes [ip-prefix] smet [as-path-regex reg-exp] [community comm-id] [next-hop ip-address] [originator-ip ip-address] [rd rd] [tag tag] [detail | hunt]

routes [ip-prefix] flow-ipv4 [as-path-regex reg-exp] [community comm-id] [hunt]

routes [ip-prefix] flow-ipv6 [as-path-regex reg-exp] [community comm-id] [hunt]

routes [ip-prefix] ipv4 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [community comm-id] [leakable] [leaked] [origin-val origin-val]

routes [ip-prefix] ipv6 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [all] [as-path-regex reg-exp] [community comm-id] [leakable] [leaked] [origin-val origin-val]

routes [ip-prefix] l2-vpn [as-path-regex reg-exp] [brief] [community comm-id] [hunt] [offset vpls-base-offset] [rd rd] [siteid site-id] [veid veid]

routes [ip-prefix] l2-vpn l2vpn-type [as-path-regex reg-exp] [brief] [community comm-id] [offset vpls-base-offset] [rd rd] [siteid site-id] [veid veid]

routes [ip-prefix] label-ipv4 [brief | detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id] [leakable] [leaked] [origin-val origin-val]

routes [ip-prefix] label-ipv6 [brief | detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id] [leakable] [leaked] [origin-val origin-val]

routes [ip-prefix] mcast-ipv4 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [community comm-id]

routes [ip-prefix] mcast-ipv6 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [community comm-id]

routes [ip-prefix] mcast-vpn-ipv4 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [community comm-id] [rd rd]

routes [ip-prefix] mcast-vpn-ip6 [brief | detail | longer | hunt [brief]] [all] [as-path-regex reg-exp] [community comm-id] [rd rd]

routes [ip-prefix] mdt-safi [brief | detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id] [grp-address mcast-grp-address] [rd rd] [source-ip ip-address]

routes [ip-prefix] ms-pw [brief] [hunt] [as-path-regex reg-exp] [community comm-id] [aii-type2 aii-type2] [rd rd]

routes [ip-prefix] mvpn-ipv4 [brief | detail | longer | hunt] [as-path-regex reg-exp] [community comm-id] [group-ip ip-address] [originator-ip ip-address] [rd rd] [source-as as-number] [source-ip ip-address] [type mvn-type]

routes [ip-prefix] mvpn-ipv6 [brief | detail | longer | hunt] [as-path-regex reg-exp] [community comm-id] [group-ip ip-address] [originator-ip ip-address] [rd rd] [source-as as-number] [source-ip ip-address] [type mvn-type]

routes [ip-prefix] route-target [brief] [as-path-regex reg-exp] [community comm-id] [source-as as-number]

routes [ip-prefix] route-target [rtc-prefix rtc-prefix] [detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id]

routes [ip-prefix] sr-policy-ipv4 [hunt] [rd rd] [color number] [endpoint ipv4-address]

routes [ip-prefix] sr-policy-ipv6 [hunt] [rd rd] [color number] [endpoint ipv6-address]

routes [ip-prefix] vpn-ipv4 [brief | detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id] [rd rd]

routes [ip-prefix] vpn-ipv6 [brief | detail | longer | hunt [brief]] [as-path-regex reg-exp] [community comm-id] [rd rd]

Context

[Tree] (show>router>bgp routes)

Full Contexts

show router bgp routes

Description

This command displays routes in the BGP Routing Information Base (RIB). When this command is issued without any parameters, the output displays all learned BGP routes belonging to the IPv4 address family. When this command is issued with other parameters the output can display a narrower or wider set of routes, including routes belonging to other address families.

Parameters

bgp-ls—

Displays BGP-LS routes.

bgp-ls ipv4-prefix—

Displays BGP-LS IPv4-prefix NLRI routes.

bgp-ls link—

Displays BGP-LS link NLRI routes.

bgp-ls node—

Displays BGP-LS node NLRI routes.

evpn auto-disc—

Displays EVPN auto-discovery routes.

evpn eth-seg—

Displays EVPN Ethernet Segment (ES) routes.

evpn incl-mcast—

Displays EVPN IMET routes.

evpn ip-prefix—

Displays EVPN IP prefix routes (type 5).

evpn ipv6-prefix—

Displays EVPN IPv6 prefix routes (type 5).

evpn mac—

Displays EVPN MAC routes (type 2).

evpn mcast-join-synch—

Displays EVPN multicast join sync routes.

evpn mcast-join-leave—

Displays EVPN multicast join leave routes.

evpn smet—

Displays EVPN SMET routes.

flow-ipv4—

Displays IPv4 flow-spec routes.

flow-ipv6—

Displays IPv6 flow-spec routes.

ipv4—

Displays unlabeled unicast IPv4 routes.

ipv6—

Displays unlabeled unicast IPv6 routes.

l2-vpn—

Displays BGP-VPLS, BGP-VPWS, BGP multi-homing and BGP-AD routes (or some subset).

label-ipv4—

Displays labeled-unicast IPv4 routes (AFI1, SAFI4).

label-ipv6—

Displays labeled-unicast IPv6 routes (AFI2, SAFI4).

mcast-ipv4—

Displays multicast IPv4 routes (AFI1, SAFI2).

mcast-ipv6—

Displays multicast IPv6 routes (AFI2, SAFI2).

mcast-vpn-ipv4—

Displays multicast VPN IPv4 routes.

mcast-vpn-ipv6—

Displays multicast VPN IPv6 routes.

mdt-safi—

Displays MVPN MDT SAFI routes.

ms-pw—

Displays multi-segment pseudowire routes.

mvpn-ipv4—

Displays MVPN IPv4 routes.

mvpn-ipv6—

Displays MVPN IPv6 routes.

route-target—

Displays RT constraint routes.

sr-policy-ipv4—

Displays BGP segment routing policy routes (IPv4 endpoint).

sr-policy-ipv6—

Displays BGP segment routing policy routes (IPv6 endpoint).

vpn-ipv4—

Displays unicast IPv4 VPN routes (AFI1, SAFI128).

vpn-ipv6—

Displays unicast IPv6 VPN routes (AFI2, SAFI128).

brief—

Displays summary information about the BGP routes.

detail—

Displays detailed information about the BGP routes, including information about the original path attribute values.

hunt—

Displays detailed information about the BGP routes, including information about the advertised routes (RIB-OUT).

longer—

When used with in a command that also provides a specific IP prefix value this filters the output to include all routes that match the prefix with the same or a longer prefix length.

as-path-regex—

Filters the BGP routes to include only those routes with an AS path matching the specified regular expression.

community—

Filters the BGP routes to include only those routes with a community value matching the specified value.

all—

Includes active routes of other (non-BGP) protocols that BGP has imported into its RIB.

leakable—

Filters the BGP routes to include only those routes that have been marked as leakable to other BGP instances (by means of a BGP import policy).

leaked—

Filters the BGP routes to include only those routes that have been leaked from other BGP instances (by means of a leak-import policy).

original-val—

Filters the BGP routes to include only those routes that have a specific RPKI route origin validation state (Not-Found, Valid, Invalid).

esi—

Filters the BGP EVPN routes to include only those routes with a specific Ethernet Segment identifier value.

next-hop—

Filters the BGP EVPN routes to include only those routes with a specific BGP next-hop address.

rd—

Filters the BGP routes to include only those routes with a specific route distinguisher value.

tag—

Filters the BGP EVPN routes to include only those routes with a specific administrative tag value.

originator-ip—

Filters the BGP EVPN or MVPN routes to include only those routes with a specific originator IP address (in the NLRI).

prefix—

Filters the BGP type 5 EVPN routes to include only those routes with a specific IPv4 or IPv6 prefix.

mac-address—

Filters the BGP type 2 EVPN routes to include only those routes that have a specific MAC address.

grp-address—

Filters the MDT-SAFI routes to include only those routes matching a specific multicast group address.

source-as—

Filters the MVPN or RT-constraint routes to include only those routes matching a specific source AS number (in the NLRI).

source-ip—

Filters the multicast routes to include only those routes matching a specific source address.

group-ip—

Filters the MVPN routes to include only those routes matching a specific group address.

type—

Filters the MVPN routes based on type (intra-ad, inter-ad, spmsi-ad, leaf-ad, source-ad, shared-join, source-join).

aii-type2—

Filters the MS-PW routes based on AII type 2 value.

offset—

Filters BGP-VPLS routes based on offset value.

siteid—

Filters BGP multi-homing routes based on the site ID value.

veid—

Filters BGP-VPLS routes based on VEID value.

rtc-prefix—

Filters the RT-constraint routes to include only those routes matching a specific NLRI string (formatted as source-as:route-target/prefix-length).

color—

Filters the SR policy routes to include only those routes matching a specific color value.

endpoint—

Filters the SR policy routes to include only those routes matching a specific endpoint address.

mvpn-type—

Specifies the mvpn-type.

Values—

intra-ad, inter-ad, spmsi-ad, leaf-ad, source-ad, shared-join, and source-join.

ip-prefix—

Specifies an IP prefix to match. For some address families this parameter has no meaning and should be omitted.

Values—

ip-address: a.b.c.d

ipv4-prefix: a.b.c.d

ipv4-prefix-length: [0 to 32]

ipv6-prefix [/pref* ipv6-prefix]:

x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D

prefix-length: [0 to 128]

reg-exp—

An AS path regular expression to match routes based on their AS path attribute reg-exp, up to 80 characters.

comm-id—

Specifies a community value, up to 72 characters.

Values—

[as-num:comm-val | ext-comm | well-known-comm]

where:

as-num — 0 to 65535
comm-val — 0 to 65535
ext-comm — the extended community, defined as one of the following:
1. {target | origin}:ip-address:comm-val
2. {target | origin}:asnum:ext-comm-val
3. {target | origin}:ext-asnum:comm-val
4. bandwidth:asnum:val-in-mbps
5. ext:4300:ovstate
6. ex \t:value1:value2
7. flowspec-set:ext-asnum:group-id
where:
1. target — route target
2. origin — route origin
3. ip-address — a.b.c.d
4. ext-comm-val — 0 to 4294967295
5. ext-asnum — 0 to 4294967295
6. bandwidth — bandwidth
7. val-in-mbps — 0 to 16777215
8. ext — extended
9. ext:4300 — origin verification
10. ovstate — 0, 1, or 2 (0 for valid, 1 for not found, 2 for invalid)
11. value1 — 0000 to FFFF
12. value2 — 0 to FFFFFFFFFFFF
13. flowspec-set — flow-spec set
14. group-id — 0 to 16383
well-known-comm — null | no-export | no-export-subconfed | no-advertise | blackhole

rd—

Specifies a route distinguisher value.

Values—

ip-addr:comm-va

2byte-asnumber:ext-comm-val

4byte-asnumber:comm-val}

veid—

Specifies a two byte identifier that represents the local bridging instance in a VPLS and is advertised through the BGP NLRI. This value must be lower than or equal to the max-ve-id.

Values—

0 to 4294967295

vpls-base-offset—

Specifies a two byte identifier advertised through the NLRI that is used to indicate which VE-ID should use the advertised NLRI at the receiving PE according to the following rule: if the offset<= local VE-ID <= offset+VBS-1 (VBS = virtual block size = 8 in our implementation) then the NLRI is processed. Otherwise it is ignored. The NLRI with this offset is generated as soon as the first VE-ID value between (offset, offset + VBS-1) is advertised in the network.

Values—

0 to 4294967295

site-id—

Specifies a two byte identifier usually employed for the BGP multi-homing solution. It identifies the BGP multi-homing site associated with one or a set of objects (SAPs, pseudowires or combination). The site-id must be identical between the two PEs carrying the connection to the access device multi-homed to the PEs.

Values—

0 to 4294967295

l2vpn-type—

Specifies a 12-byte Virtual Switch Instance identifier (VSI-ID) type.

Values—

bgp-ad, bgp-vpls, bgp-vpws, and multi-homing

rtc-prefix—

source-as:{ip-addr:comm-val | 2byte-asnumber:ext-comm-val | 4byte-asnumber:comm-val}/prefix-length

Values—

ip-addr: a.b.c.d

comm-val: 0 to 65535

2byte-asnumber: 0 to 65535

ext-comm-val: 0 to 4294967295

4byte-asnumber: 0 to 4294967295

prefix-length: 0 to 96

origin-val—

Filters the BGP routes displayed by the command to those routes with a particular RPKI route origin validation state.

Values—

valid — Displays valid validation state information.

invalid — Displays invalid validation state information.

notfound — Displays state information for not found origin values.

Output

BGP Route

Table 395 describes the command output fields for BGP routes.

Table 395: BGP Routes Output Fields

Label	Description
BGP Router ID	The local BGP router ID.
AS	The configured autonomous system number.
Local AS	The configured local AS setting. If not configured, then the value is the same as the AS.
Route Dist.	Displays the route distinguisher identifier attached to routes that distinguishes the VPN it belongs.
VPN Label	Displays the label generated by the PEs label manager.
Network	The IP prefix and mask length.
Nexthop	The BGP nexthop.
From	The advertising BGP neighbor’s IP address.
Res. Nexthop	The resolved nexthop.
Local Pref.	The local preference value. This value is used if the BGP route arrives from a BGP peer without the Local Pref attribute set. It is overridden by any value set via a route policy.
Flag	u — used s — suppressed h —history d — decayed * — valid i — igp e — egp ? — incomplete > — best S — sticky
Aggregator AS	The aggregator AS value. none — Aggregator AS attributes are not present.
Aggregator	The aggregator attribute value. none — Aggregator attributes are not present.
Atomic Aggr.	Atomic —Not Atomic — The atomic aggregator flag is not set. The atomic aggregator flag is set.
MED	The MED metric value. none — MED metrics are present.
Community	The BGP community attribute list.
Cluster	The route reflector cluster list.
Originator Id	The originator ID path attribute value. none — The originator ID attribute is not present.
Peer Router Id	The router ID of the advertising router.
AS-Path	The BGP AS path attribute.
VPRN Imported	Displays the VPRNs where a particular BGP-VPN received route has been imported and installed.
TieBreakReason	Displays the step in the BGP decision process where a BGP route lost the tie-break with the next better BGP route for the same prefix. LocalPref — This route is not the best because the next better route has a higher LOCAL_PREF. AIGP — This route is not the best because the next better route has a lower derived AIGP metric value. ASPathLen — This route is not the best because the next better route has a shorter AS PATH length. Origin — This route is not the best because the next better route has a lower Origin value. MED — This route is not the best because the next better route has a lower MED, and MED comparison of the routes was allowed. IBGP — This IBGP route is not the best because the next better route is an EBGP route. NHCost — This route is not the best because the next better route has a lower metric value to reach the BGP NEXT HOP. BGPID — This route is not the best because the next better route has a lower Originator ID or BGP Identifier. ClusterLen — This route is not the best because the next better route has a shorter Cluster list length. PeerIP — This route is not the best because the next better route has a lower neighbor IP address.

Sample Output Show Router BGP Routes SR IPv6 Policy Routes

# show router bgp routes sr-policy-ipv6

===============================================================================

BGP Router ID:10.20.1.1 AS:2 Local AS:2

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

l - leaked, x - stale, > - best, b - backup, p - purge

Origin codes : i - IGP, e - EGP, ? - incomplete

===============================================================================

BGP SR-POLICY-v6 Routes

===============================================================================

Flag RD/Color/End Point LocalPref MED

Nexthop (Router) Path-Id IGP Cost

As-Path Label

-------------------------------------------------------------------------------

u*>i 2/20/3ffe::a14:102 100 None

::a14:102 None N/A

No As-Path

u*>i 3/30/:: 100 None

::a14:102 None N/A

No As-Path

-------------------------------------------------------------------------------

Routes : 2

===============================================================================

# show router bgp routes sr-policy-ipv6 hunt

===============================================================================

BGP Router ID:10.20.1.1 AS:2 Local AS:2

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

l - leaked, x - stale, > - best, b - backup, p - purge

Origin codes : i - IGP, e - EGP, ? - incomplete

===============================================================================

BGP SR-POLICY-v6 Routes

===============================================================================

-------------------------------------------------------------------------------

RIB In Entries

-------------------------------------------------------------------------------

RD/Color/End Pt: 2/20/3ffe::a14:102

BSID/Pref/TunnType: 100001/10/sr-policy

Nexthop : ::a14:102

From : 10.20.1.3

Res. Nexthop : ::

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : None

AIGP Metric : None IGP Cost : n/a

Connector : None

Community : color:01:10 target:10.20.1.1:0

Cluster : 10.20.1.3

Originator Id : 10.20.1.2 Peer Router Id : 10.20.1.3

Flags : Used Valid Best IGP

Route Source : Internal

AS-Path : No As-Path

Route Tag : 0

Neighbor-AS : n/a

Orig Validation: N/A

Source Class : 0 Dest Class : 0

Add Paths Send : Default

Last Modified : 00h22m45s

RD/Color/End Pt: 3/30/::

BSID/Pref/TunnType: 100002/10/sr-policy

Nexthop : ::a14:102

From : 10.20.1.3

Res. Nexthop : ::

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : None

AIGP Metric : None IGP Cost : n/a

Connector : None

Community : color:01:10 target:10.20.1.1:0

Cluster : 10.20.1.3

Originator Id : 10.20.1.2 Peer Router Id : 10.20.1.3

Flags : Used Valid Best IGP

Route Source : Internal

AS-Path : No As-Path

Route Tag : 0

Neighbor-AS : n/a

Orig Validation: N/A

Source Class : 0 Dest Class : 0

Add Paths Send : Default

Last Modified : 00h22m42s

-------------------------------------------------------------------------------

RIB Out Entries

-------------------------------------------------------------------------------

Routes : 2

===============================================================================

# show router bgp routes 10.10.10.5

===============================================================================

BGP Router ID:10.20.1.3 AS:100 Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

l - leaked, x - stale, > - best, b - backup, p - purge Origin codes : i - IGP, e - EGP, ? - incomplete

===============================================================================

BGP IPv4 Routes

===============================================================================

Flag Network LocalPref MED

Nexthop (Router) Path-Id Label

As-Path

-------------------------------------------------------------------------------

u*>? 10.10.10.0/24 None None

10.20.1.4 None -

200 300

-------------------------------------------------------------------------------

Routes : 1

# show router bgp routes l2-vpn detail

========================================================================

BGP Router ID:10.20.1.3 AS:1000 Local AS:1000

========================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

========================================================================

BGP L2VPN Routes

========================================================================

Route Type : AutoDiscovery

Route Dist. : 10.20.1.1:1

Prefix : 10.20.1.1

Nexthop : 10.20.1.1

From : 10.20.1.1

Res. Nexthop : n/a

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 0

AIGP Metric : Not Atomic

Community : target:4455:4455 target:1.20.30.40:6543

l2-vpn/vrf-imp:100.1.200.1:65535

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.1

Flags : Used Valid Best IGP

Route Source : Internal

AS-Path : No As-Path

------------------------------------------------------------------------

PMSI Tunnel Attribute :

Tunnel-type : RSVP-TE P2MP LSP Flags : Leaf not required

MPLS Label : 0

P2MP-ID : 1001 Tunnel-ID : 61440

Extended-Tunne*: 10.20.1.1

# show router bgp routes l2-vpn detail

========================================================================

BGP Router ID:10.20.1.3 AS:1000 Local AS:1000

========================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

========================================================================

BGP L2VPN Routes

========================================================================

Route Type : AutoDiscovery

Route Dist. : 10.20.1.1:1

Prefix : 10.20.1.1

Nexthop : 10.20.1.1

From : 10.20.1.1

Res. Nexthop : n/a

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 0

AIGP Metric : Not Atomic

Community : target:4455:4455 target:1.20.30.40:6543

l2-vpn/vrf-imp:100.1.200.1:65535

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.1

Flags : Used Valid Best IGP

Route Source : Internal

AS-Path : No As-Path

------------------------------------------------------------------------

PMSI Tunnel Attribute :

Tunnel-type : RSVP-TE P2MP LSP Flags : Leaf not required

MPLS Label : 0

P2MP-ID : 1001 Tunnel-ID : 61440

Extended-Tunne*: 10.20.1.1

# show router bgp routes l2-vpn 10.20.1.1 rd 10.20.1.1:1 hunt

===============================================================================

BGP Router ID:10.20.1.3 AS:None Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP L2VPN-AD Routes

===============================================================================

Route Type : AutoDiscovery

Route Dist. : 10.20.1.1:1

Prefix : 10.20.1.1

Nexthop : 10.20.1.1

From : 10.20.1.2

Res. Nexthop : n/a

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 0

AIGP Metric : None

Connector : None

Community : target:1.20.30.40:6543

l2-vpn/vrf-imp:100.1.200.1:65535

Cluster : 1.1.1.1

Originator Id : 10.20.1.1 Peer Router Id : 10.20.1.2

Flags : Used Valid Best IGP

Route Source : Internal

AS-Path : No As-Path

-------------------------------------------------------------------------------

RIB Out Entries

-------------------------------------------------------------------------------

Routes : 1

===============================================================================

# show router bgp routes vpn-ipv4 6.6.6.6/32 rd 10.20.1.4:1 hunt

===============================================================================

BGP Router ID:10.20.1.3 AS:None Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP VPN-IPv4 Routes

===============================================================================

-------------------------------------------------------------------------------

RIB In Entries

-------------------------------------------------------------------------------

Network : 6.6.6.6/32

Nexthop : 10.20.1.4

Route Dist. : 10.20.1.4:1 VPN Label : 131070

Path Id : None

From : 10.20.1.4

Res. Nexthop : n/a

Local Pref. : 100 Interface Name : int_to_D

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : None

AIGP Metric : None

Connector : None

Community : target:100:100

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.4

Fwd Class : None Priority : None

Flags : Used Valid Best Incomplete

Route Source : Internal

AS-Path : 106

VPRN Imported : 1

-------------------------------------------------------------------------------

RIB Out Entries

-------------------------------------------------------------------------------

Routes : 1

===============================================================================

# show router bgp routes vpn-ipv4 6.6.6.6 32 hunt << SAME AS ABOVE BUT RD NOT SPECIFIED.I.E. ANY RD (RD is optional).

===============================================================================

BGP Router ID:10.20.1.3 AS:None Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP VPN-IPv4 Routes

===============================================================================

-------------------------------------------------------------------------------

RIB In Entries

-------------------------------------------------------------------------------

Network : 6.6.6.6/32

Nexthop : 10.20.1.4

Route Dist. : 10.20.1.4:1 VPN Label : 131070

Path Id : None

From : 10.20.1.4

Res. Nexthop : n/a

Local Pref. : 100 Interface Name : int_to_D

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : None

AIGP Metric : None

Connector : None

Community : target:100:100

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.4

Fwd Class : None Priority : None

Flags : Used Valid Best Incomplete

Route Source : Internal

AS-Path : 106

VPRN Imported : 1

-------------------------------------------------------------------------------

RIB Out Entries

-------------------------------------------------------------------------------

Routes : 1

===============================================================================

# show router bgp routes 3FFE::606:609/128 vpn-ipv6 hunt

===============================================================================

BGP Router ID:10.20.1.3 AS:None Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP VPN-IPv6 Routes

===============================================================================

-------------------------------------------------------------------------------

RIB In Entries

-------------------------------------------------------------------------------

Network : 3FFE::606:609/128

Nexthop : ::FFFF:A14:104

Route Dist. : 10.20.1.4:1 VPN Label : 131070

Path Id : None

From : 10.20.1.4

Res. Nexthop : n/a

Local Pref. : 100 Interface Name : int_to_D

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : None

AIGP Metric : None

Connector : None

Community : target:100:100

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.4

Fwd Class : None Priority : None

Flags : Used Valid Best Incomplete

Route Source : Internal

AS-Path : 106

VPRN Imported : 1

-------------------------------------------------------------------------------

RIB Out Entries

-------------------------------------------------------------------------------

Routes : 1

===============================================================================

# show router bgp routes vpn-ipv6 3FFE::606:607/128 rd 10.20.1.4:1 hunt

===============================================================================

BGP Router ID:10.20.1.3 AS:None Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP VPN-IPv6 Routes

===============================================================================

-------------------------------------------------------------------------------

RIB In Entries

-------------------------------------------------------------------------------

Network : 3FFE::606:607/128

Nexthop : ::FFFF:A14:104

Route Dist. : 10.20.1.4:1 VPN Label : 131070

Path Id : None

From : 10.20.1.4

Res. Nexthop : n/a

Local Pref. : 100 Interface Name : int_to_D

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : None

AIGP Metric : None

Connector : None

Community : target:100:100

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.4

Fwd Class : None Priority : None

Flags : Used Valid Best Incomplete

Route Source : Internal

AS-Path : 106

VPRN Imported : 1

-------------------------------------------------------------------------------

RIB Out Entries

-------------------------------------------------------------------------------

Routes : 1

===============================================================================

# show router bgp routes vpn-ipv6 3FFE::606:607/128 rd 10.20.1.4:2 hunt

===============================================================================

BGP Router ID:10.20.1.3 AS:None Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP VPN-IPv6 Routes

===============================================================================

No Matching Entries Found

===============================================================================

# show router bgp routes hunt 1.1.1.1/32

===============================================================================

BGP Router ID:10.20.1.3 AS:5000 Local AS:5000

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best

===============================================================================

BGP IPv4 Routes

===============================================================================

-------------------------------------------------------------------------------

RIB In Entries

-------------------------------------------------------------------------------

Network : 1.1.1.1/32

Nexthop : 10.20.1.1

From : 10.20.1.1

Res. Nexthop : 10.20.1.1 (RSVP LSP: 1)

Local Pref. : 100 Interface Name : ip-10.10.2.3

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : None

Community : No Community Members

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.1

Flags : Used Valid Best Incomplete

AS-Path : No As-Path

-------------------------------------------------------------------------------

RIB Out Entries

-------------------------------------------------------------------------------

Routes : 1

===============================================================================

# show router bgp routes family ipv4

===============================================================================

BGP Router ID : 10.10.10.103 AS : 200 Local AS : 200

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best

===============================================================================

BGP Routes

===============================================================================

Flag Network Nexthop LocalPref MED

VPN Label As-Path

-------------------------------------------------------------------------------

No Matching Entries Found

===============================================================================

# show router bgp routes 13.1.0.0/24 de

===============================================================================

BGP Router ID : 10.128.0.161 AS : 65535 Local AS : 65535

===============================================================================

Legend - Status codes : u - used, s - suppressed, h - history, d - decayed, * -

valid Origin codes : i - IGP, e - EGP, ? - incomplete, > - best

===============================================================================

BGP Routes

===============================================================================

Original Attributes

Network : 13.1.0.0/24 Nexthop : 10.20.1.20

Route Dist. : 10070:100 VPN Label : 152784

From : 10.20.1.20 Res. Nexthop : 10.130.0.2

Local Pref. : 100

Aggregator AS : none Aggregator : none

Atomic Aggr. : Not Atomic MED : none

Community : target:10070:1

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.20

Flags : Used Valid Best IGP

AS-Path : 10070 {14730}

Modified Attributes

Network :13.1.0.0/24 Nexthop :10.20.1.20

Route Dist.: 10001:100 VPN Label :152560

From :10.20.1.20 Res. Nexthop :10.130.0.2

Local Pref.:100

Aggregator AS: none Aggregator:none

Atomic Aggr.:Not Atomic MED :none

Community :target:10001:1

Cluster :No Cluster Members

Originator Id:None Peer Router Id:10.20.1.20

Flags :Used Valid Best IGP

AS-Path :No As-Path

-------------------------------------------------------------------------------

...

===============================================================================

# show router bgp routes 100.0.0.0/30 hunt

===============================================================================

BGP Router ID : 10.20.1.1 AS : 100Local AS : 100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best

===============================================================================

BGP Routes

===============================================================================

RIB In Entries

-------------------------------------------------------------------------------

Network : 100.0.0.0/30

Nexthop : 10.20.1.2

Route Dist. : 10.20.1.2:1VPN Label: 131070

From : 10.20.1.2

Res. Nexthop : 10.10.1.2

Local Pref. : 100Interface Name: to-sr7

Aggregator AS : noneAggregator: none

Atomic Aggr. : Not AtomicMED: none

Community : target:10.20.1.2:1

Cluster : No Cluster Members

Originator Id : NonePeer Router Id: 10.20.1.2

Flags : Used Valid Best IGP

AS-Path : No As-Path

VPRN Imported : 1 2 10 12

-------------------------------------------------------------------------------

RIB Out Entries

-------------------------------------------------------------------------------

Routes : 1

===============================================================================

A:SR-12#

# show router bgp routes mvpn-ipv4

===============================================================================

BGP Router ID:10.20.1.3 AS:200 Local AS:200

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best

===============================================================================

BGP MVPN-IPv4 Routes

===============================================================================

Flag RouteType OriginatorIP LocalPref MED

RD SourceAS VPNLabel

Nexthop SourceIP

As-Path GroupIP

-------------------------------------------------------------------------------

u*>i Intra-Ad 10.20.1.4 100 0

1:1 - -

10.20.1.4 -

No As-Path -

u*>i Source-Ad - 100 0

1:1 - -

10.20.1.4 130.100.1.2

No As-Path 227.0.0.0

u*>i Source-Join - 100 0

1:1 200 -

10.20.1.4 150.100.1.2

No As-Path 226.0.0.0

-------------------------------------------------------------------------------

Routes : 3

===============================================================================

# show router bgp routes mvpn-ipv4 brief

===============================================================================

BGP Router ID:10.20.1.3 AS:200 Local AS:200

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best

===============================================================================

BGP MVPN-IPv4 Routes

===============================================================================

Flag RouteType OriginatorIP SourceIP

RD SourceAS GroupIP

-------------------------------------------------------------------------------

u*>i Intra-Ad 10.20.1.4 -

1:1 - -

u*>i Source-Ad - 130.100.1.2

1:1 - 227.0.0.0

u* >i Source-Join - 150.100.1.2

1:1 200 226.0.0.0

-------------------------------------------------------------------------------

Routes : 3

===============================================================================

# show router bgp routes mvpn-ipv4 type source-join source-as

200 source-ip 150.100.1.2 group-ip 226.0.0.0 detail

===============================================================================

BGP Router ID:10.20.1.3 AS:200 Local AS:200

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best

===============================================================================

BGP MVPN-IPv4 Routes

===============================================================================

Route Type : Source-Join

Route Dist. : 1:1

Source AS : 200

Source IP : 150.100.1.2

Group IP : 226.0.0.0

Nexthop : 10.20.1.4

From : 10.20.1.4

Res. Nexthop : 0.0.0.0

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 0

Community : target:10.20.1.3:2

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.4

Flags : Used Valid Best IGP

AS-Path : No As-Path

-------------------------------------------------------------------------------

Routes : 1

===============================================================================

# show router bgp routes mvpn-ipv4 type spmsi-ad detail

===============================================================================

BGP Router ID:10.20.1.3 AS:46000 Local AS:46000

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

l - leaked

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP MVPN-IPv4 Routes

===============================================================================

Original Attributes

Route Type : Spmsi-Ad

Route Dist. : 10.1.200.41:1

Originator IP : 10.20.1.4

Source IP : 10.1.101.2

Group IP : 225.100.0.0

<snip>

Last Modified : 00h18m52s

VPRN Imported : 1

-------------------------------------------------------------------------------

PMSI Tunnel Attribute :

Tunnel-type : None Flags : Leaf required

MPLS Label : 0

-------------------------------------------------------------------------------

===============================================================================

# show router bgp routes mvpn-ipv6 type spmsi-ad detail

===============================================================================

BGP Router ID:10.20.1.3 AS:46000 Local AS:46000

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

l - leaked

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP MVPN-IPv6 Routes

===============================================================================

Original Attributes

Route Type : Spmsi-Ad

Route Dist. : 10.1.200.41:1

Originator IP : 10.20.1.4

Source IP : 2001:10:1:101::2

Group IP : ff0e:225:100::

<snip>

VPRN Imported : 1

-------------------------------------------------------------------------------

PMSI Tunnel Attribute :

Tunnel-type : None Flags : Leaf required

MPLS Label : 0

-------------------------------------------------------------------------------

===============================================================================

# show router bgp routes ms-pw

===============================================================================

BGP Router ID:10.20.1.3 AS:100 Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP MSPW Routes

===============================================================================

Flag Network RD

Nexthop AII-Type2/Preflen

As-Path

-------------------------------------------------------------------------------

? 3:10.20.1.3 100:3

10.20.1.5 3:10.20.1.3:0/64

200 100

? 3:10.20.1.3 100:4

10.20.1.5 3:10.20.1.3:0/64

200 100

u*>? 6:10.20.1.6 100:6

10.20.1.5 6:10.20.1.6:0/64

200 300 400

-------------------------------------------------------------------------------

Routes : 3

===============================================================================

# show router bgp routes ipv4 detail

===============================================================================

BGP Router ID:1.1.1.1 AS:100 Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP IPv4 Routes

===============================================================================

-------------------------------------------------------------------------------

Original Attributes

Network : 11.1.1.1/32

Nexthop : 192.168.1.1

Path Id : None

From : 192.168.1.1

Res. Nexthop : 192.168.1.1

Local Pref. : n/a Interface Name : net

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 5000

AIGP Metric : 100

Community : None

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 2.2.2.2

Fwd Class : None Priority : None

Flags : Used Valid Best Incomplete

Route Source : External

AS-Path : 200 400 500

Modified Attributes

Network : 11.1.1.1/32

Nexthop : 192.168.1.1

Path Id : None

From : 192.168.1.1

Res. Nexthop : 192.168.1.1

Local Pref. : None Interface Name : net

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 5000

AIGP Metric : 110

Community : None

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 2.2.2.2

Fwd Class : None Priority : None

Flags : Used Valid Best Incomplete

Route Source : External

AS-Path : 200 400 500

-------------------------------------------------------------------------------

Routes : 1

===============================================================================

# show router bgp routes 11.1.1.1/32 hunt

===============================================================================

BGP Router ID:1.1.1.1 AS:100 Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP IPv4 Routes

===============================================================================

-------------------------------------------------------------------------------

RIB In Entries

-------------------------------------------------------------------------------

Network : 11.1.1.1/32

Nexthop : 192.168.1.1

Path Id : None

From : 192.168.1.1

Res. Nexthop : 192.168.1.1

Local Pref. : None Interface Name : net

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 5000

AIGP Metric : 110

Community : None

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 2.2.2.2

Fwd Class : None Priority : None

Flags : Used Valid Best Incomplete

Route Source : External

AS-Path : 200 400 500

-------------------------------------------------------------------------------

RIB Out Entries

-------------------------------------------------------------------------------

Network : 11.1.1.1/32

Nexthop : 1.1.1.1

Path Id : None

To : 3.3.3.3

Res. Nexthop : n/a

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 5000

AIGP Metric : 150

Community : None

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 3.3.3.3

Origin : Incomplete

AS-Path : 200 400 500

-------------------------------------------------------------------------------

Routes : 2

===============================================================================

# show router bgp routes bgp-ls hunt link

===============================================================================

BGP Router ID:38.120.48.226 AS:65000 Local AS:65000

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

l - leaked, x - stale, > - best, b - backup, p - purge

Origin codes : i - IGP, e - EGP, ? - incomplete

===============================================================================

BGP-LS Link NLRIs

===============================================================================

-------------------------------------------------------------------------------

RIB In Entries

-------------------------------------------------------------------------------

Network:

Type : LINK-NLRI

Protocol : ISIS Level-2 Identifier : 0xa

Local Node descriptor:

Autonomous System : 0.0.253.232

Link State Id : 10

IGP Router Id : 0x38120048184

Remote Node descriptor:

Autonomous System : 0.0.253.232

Link State Id : 10

IGP Router Id : 0x38120048223

Link descriptor:

IPV4 Interface Addr: 10.0.14.184

IPV4 Neighbor Addr : 10.0.14.223

Nexthop : 38.120.48.199

From : 38.120.48.199

Res. Nexthop : 0.0.0.0

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : None

AIGP Metric : None

Connector : None

Community : No Community Members

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 38.120.48.199

Flags : Valid Best IGP

Route Source : Internal

AS-Path : No As-Path

Route Tag : 0

Neighbor-AS : N/A

Orig Validation: N/A

Source Class : 0 Dest Class : 0

Add Paths Send : Default

Last Modified : 02h27m50s

-------------------------------------------------------------------------------

Link State Attribute TLVs :

Administrative group (color) : 0x0

Maximum link bandwidth : 100000 Kbps

Max. reservable link bandwidth : 100000 Kbps

Unreserved bandwidth0 : 100000 Kbps

Unreserved bandwidth1 : 100000 Kbps

Unreserved bandwidth2 : 100000 Kbps

Unreserved bandwidth3 : 100000 Kbps

Unreserved bandwidth4 : 100000 Kbps

Unreserved bandwidth5 : 100000 Kbps

Unreserved bandwidth6 : 100000 Kbps

Unreserved bandwidth7 : 100000 Kbps

TE Default Metric : 100

IGP Metric : 100

Adjacency Segment Identifier (Adj-SID) : flags 0x30 weight 0 sid 262136

-------------------------------------------------------------------------------

Network:

Type : LINK-NLRI

Protocol : ISIS Level-2 Identifier : 0xa

Local Node descriptor:

Autonomous System : 0.0.253.232

Link State Id : 10

IGP Router Id : 0x38120048184

Remote Node descriptor:

Autonomous System : 0.0.253.232

Link State Id : 10

IGP Router Id : 0x38120048223

Link descriptor:

IPV4 Interface Addr: 10.0.14.184

IPV4 Neighbor Addr : 10.0.14.223

Nexthop : 38.120.48.221

From : 38.120.48.221

Res. Nexthop : 0.0.0.0

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : None

AIGP Metric : None

Connector : None

Community : No Community Members

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 38.120.48.221

Flags : Valid IGP

TieBreakReason : OriginatorID

Route Source : Internal

AS-Path : No As-Path

Route Tag : 0

Neighbor-AS : N/A

Orig Validation: N/A

Source Class : 0 Dest Class : 0

Add Paths Send : Default

Last Modified : 02h27m54s

-------------------------------------------------------------------------------

Link State Attribute TLVs :

Administrative group (color) : 0x0

Maximum link bandwidth : 100000 Kbps

Max. reservable link bandwidth : 100000 Kbps

Unreserved bandwidth0 : 100000 Kbps

Unreserved bandwidth1 : 100000 Kbps

Unreserved bandwidth2 : 100000 Kbps

Unreserved bandwidth3 : 100000 Kbps

Unreserved bandwidth4 : 100000 Kbps

Unreserved bandwidth5 : 100000 Kbps

Unreserved bandwidth6 : 100000 Kbps

Unreserved bandwidth7 : 100000 Kbps

TE Default Metric : 100

IGP Metric : 100

Adjacency Segment Identifier (Adj-SID) : flags 0x30 weight 0 sid 262136

---------------------------------------------

# show router bgp routes

===============================================================================

BGP Router ID:10.20.1.1 AS:1 Local AS:1

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP IPv4 Routes

===============================================================================

Flag Network LocalPref MED

Nexthop Path-Id Label

As-Path

-------------------------------------------------------------------------------

u*>i 20.0.0.1/32 100 2010

10.20.1.2 None 131057

ub*i 20.0.0.1/32 100 2010

10.20.1.3 None 131067

-------------------------------------------------------------------------------

Routes : 2

===============================================================================

# show router bgp routes evpn mac mac-address 00:00:01:00:01:02 hunt

===============================================================================

BGP Router ID:10.20.1.1 AS:100 Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP EVPN Mac Routes

===============================================================================

-------------------------------------------------------------------------------

RIB In Entries

-------------------------------------------------------------------------------

Network : N/A

Nexthop : 10.20.1.2

From : 10.20.1.2

Res. Nexthop : N/A

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 0

AIGP Metric : None

Connector : None

Community : target:100:1 bgp-tunnel-encap:VXLAN

mac-mobility:Seq:0/Static

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.2

Flags : Used Valid Best IGP

Route Source : Internal

AS-Path : 111

EVPN type : MAC

ESI : 0:0:0:0:0:0:0:0:0:0 Tag : 1

IP Address : N/A Route Dist. : 10.20.1.2:1

Mac Address : 00:00:01:00:01:02

MPLS Label1 : X MPLS Label2 : Y

Route Tag : Z

Neighbor-AS : 111

Orig Validation: N/A

Source Class : 0 Dest Class : 0

-------------------------------------------------------------------------------

RIB Out Entries

-------------------------------------------------------------------------------

Routes : 1

===============================================================================

# show router bgp routes evpn ip-prefix prefix 3.0.1.6/32 detail

===============================================================================

BGP Router ID:10.20.1.1 AS:100 Local AS:100

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

Origin codes : i - IGP, e - EGP, ? - incomplete, > - best, b - backup

===============================================================================

BGP EVPN IP-Prefix Routes

===============================================================================

-------------------------------------------------------------------------------

Original Attributes

Network : N/A

Nexthop : 10.20.1.2

From : 10.20.1.2

Res. Nexthop : N/A

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 0

AIGP Metric : None

Connector : None

Community : target:100:1 mac-nh:00:00:01:00:01:02

bgp-tunnel-encap:VXLAN

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.2

Flags : Used Valid Best IGP

Route Source : Internal

AS-Path : No As-Path

EVPN type : IP-PREFIX

ESI : N/A Tag : 1

Gateway Address: 00:00:01:00:01:02

Prefix : 3.0.1.6/32 Route Dist. : 10.20.1.2:1

MPLS Label : X

Route Tag : Z

Neighbor-AS : N/A

Orig Validation: N/A

Source Class : 0 Dest Class : 0

Modified Attributes

Network : N/A

Nexthop : 10.20.1.2

From : 10.20.1.2

Res. Nexthop : N/A

Local Pref. : 100 Interface Name : NotAvailable

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 0

AIGP Metric : None

Connector : None

Community : target:100:1 mac-nh:00:00:01:00:01:02

bgp-tunnel-encap:VXLAN

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 10.20.1.2

Flags : Used Valid Best IGP

Route Source : Internal

AS-Path : 111

EVPN type : IP-PREFIX

ESI : N/A Tag : 1

Gateway Address: 00:00:01:00:01:02

Prefix : 3.0.1.6/32 Route Dist. : 10.20.1.2:1

MPLS Label : X

Route Tag : W

Neighbor-AS : 111

Orig Validation: N/A

Source Class : 0 Dest Class : 0

-------------------------------------------------------------------------------

Routes : 1

===============================================================================

# show router bgp routes bgp-ls

====================================================================

BGP-LS NLRIs

====================================================================

--------------------------------------------------------------------

Type: Node

Protocol: ISIS | OSPFLevel: L1 | L2 | NA

Identifier:

Network : 215.0.0.0/24

Nexthop : 202.50.0.2

Path Id : None

From : 10.255.105.141

AS Path: 65534

Local Node

Name:<= Do we populate this?

Autonomous System:

Area ID:

Rtr ID:

Flags:

Type: Link

Protocol: ISIS | OSPFLevel: L1 | L2 | NA

Identifier:

Network : 215.0.0.0/24

Nexthop : 202.50.0.2

Path Id : None

From : 10.255.105.141

AS Path: 65534

Local Node

Name:

Autonomous System:

Area ID:

Rtr ID:

Remote Node

Name:

Autonomous System:

Area ID:

Rtr ID:

Descriptor

IPv4 Address: 10.10.1.1

Attributes

Flags:

IGP Metric: 1000

Admin-Grp: 0

Maximum Link BW (kbps): 100000

Maximum Reservable BW (kbps): 100000

TE Default Metric: 1000

Unreserved BW (kbps): 10000

Type: IPv4 Prefix

Protocol: ISIS | OSPFLevel: L1 | L2 | NA

Identifier:

Network : 215.0.0.0/24

Nexthop : 202.50.0.2

Path Id : None

From : 10.255.105.141

AS Path: 65534

Local Node

Name:<= Do we populate this?

Autonomous System:

Area ID: 0.0.0.0

Rtr ID: 10.20.1.6

Flags:

Prefix descriptor

IPv4 Address: 10.20.1.6

Prefix-len: 32

MT_ID :0

Route Type :Unknown

# show router bgp routes evpn mcast-join-synch hunt

===============================================================================

BGP Router ID:192.0.2.3 AS:64500 Local AS:64500

===============================================================================

Legend -

Status codes : u - used, s - suppressed, h - history, d - decayed, * - valid

l - leaked, x - stale, > - best, b - backup, p - purge

Origin codes : i - IGP, e - EGP, ? - incomplete

===============================================================================

BGP EVPN Mcast Join Synch Routes

===============================================================================

-------------------------------------------------------------------------------

RIB In Entries

-------------------------------------------------------------------------------

Network : n/a

Nexthop : 192.0.2.2

From : 192.0.2.2

Res. Nexthop : 192.168.23.1

Local Pref. : 100 Interface Name : int-PE-3-PE-2

Aggregator AS : None Aggregator : None

Atomic Aggr. : Not Atomic MED : 0

AIGP Metric : None IGP Cost : 10

Connector : None

Community : evi-target:64500:2001 target:00:00:00:00:00:01

bgp-tunnel-encap:MPLS

Cluster : No Cluster Members

Originator Id : None Peer Router Id : 192.0.2.2

Flags : Used Valid Best IGP

Route Source : Internal

AS-Path : No As-Path

EVPN type : MCAST-JOIN

Tag : 0

ESI : 01:00:00:00:00:00:01:00:00:00

Version : Flags(0xc): IE:1/V3:1/V2:0/V1:0

Src IP : 0.0.0.0

Grp IP : 239.0.0.4

Originator IP : 192.0.2.2

Route Dist. : 192.0.2.2:2001

Route Tag : 0

Neighbor-AS : n/a

Orig Validation: N/A

Source Class : 0 Dest Class : 0

Add Paths Send : Default

Last Modified : 00h29m38s

Supported Platforms

All

routes

Syntax

routes [ipv4-unicast | ipv6-unicast | ipv4-multicast | ipv6-multicast | mt mt-id-number] [ip-prefix[/prefix-length]] [alternative] [exclude-shortcut] [flex-algo {flex-algo-id | all}] [detail]

Context

[Tree] (show>router>isis routes)

Full Contexts

show router isis routes

Description

This command displays the routes in the IS-IS route table.

Parameters

ipv4-unicast—

Displays IPv4 unicast parameters.

ipv6-unicast—

Displays IPv6 unicast parameters.

mt mt-id-number—

Displays multi-topology parameters.

Values—

0, 2

alternative—

Displays LFA details.

exclude-shortcut—

Displays the routes without shortcuts.

detail—

Displays detailed information.

flex-algo flex-algo-id—

Displays the flexible algorithm aware forwarding path.

Values—

128 to 255, all

flex-algo all—

Displays all the flexible algorithms-aware forwarding paths.

Output

The following output is an example of IS-IS route information, and Table 396 describes the output fields.

Sample Output

*A:Dut-C# show router isis routes

===============================================================================

Rtr Base ISIS Instance 0 Route Table

===============================================================================

Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname

NextHop MT AdminTag/SID[F]

-------------------------------------------------------------------------------

1.1.2.0/24 20 1/Int. 0 Dut-A

1.1.3.1 0 0

1.1.2.0/24 20 1/Int. 0 Dut-B

1.2.3.2 0 0

1.1.3.0/24 10 1/Int. 0 Dut-C

0.0.0.0 0 0

1.2.3.0/24 10 1/Int. 0 Dut-C

0.0.0.0 0 0

1.2.4.0/24 20 1/Int. 0 Dut-B

1.2.3.2 0 0

1.3.5.0/24 10 1/Int. 0 Dut-C

0.0.0.0 0 0

1.4.5.0/24 20 1/Int. 0 Dut-E

1.3.5.5 0 0

1.4.6.0/24 30 1/Int. 0 Dut-B

1.2.3.2 0 0

1.4.6.0/24 30 1/Int. 0 Dut-E

1.3.5.5 0 0

10.20.1.1/32 10 1/Int. 0 Dut-A

1.1.3.1 0 0

10.20.1.2/32 10 1/Int. 0 Dut-B

1.2.3.2 0 0

10.20.1.3/32 0 1/Int. 0 Dut-C

0.0.0.0 0 0

10.20.1.4/32 20 1/Int. 0 Dut-B

1.2.3.2 0 0

10.20.1.4/32 20 1/Int. 0 Dut-E

1.3.5.5 0 0

10.20.1.5/32 10 1/Int. 0 Dut-E

1.3.5.5 0 0

10.20.1.6/32 30 1/Int. 0 Dut-B

1.2.3.2 0 0

10.20.1.6/32 30 1/Int. 0 Dut-E

1.3.5.5 0 0

-------------------------------------------------------------------------------

No. of Routes: 17 (17 paths)

-------------------------------------------------------------------------------

Flags : L = LFA nexthop available

SID[F] : R = Re-advertisement

N = Node-SID

nP = no penultimate hop POP

E = Explicit-Null

V = Prefix-SID carries a value

L = value/index has local significance

===============================================================================

*A:Dut-C#

*A:Dut-C# show router isis routes ipv4-unicast

===============================================================================

Rtr Base ISIS Instance 0 Route Table

===============================================================================

Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname

NextHop MT AdminTag/SID[F]

-------------------------------------------------------------------------------

1.2.3.0/24 10 1/Int. 8 Dut-C

0.0.0.0 0 0

1.2.4.0/24 20 1/Int. 8 Dut-D

1.3.4.4 0 0

1.2.5.0/24 20 1/Int. 8 Dut-B

1.2.3.2 0 0

1.3.4.0/24 10 1/Int. 8 Dut-C

0.0.0.0 0 0

1.3.5.0/24 [L] 30 1/Int. 11 Dut-B

1.2.3.2 0 0

1.4.5.0/24 20 1/Int. 8 Dut-D

1.3.4.4 0 0

2.3.4.0/24 40 1/Int. 11 Dut-D

1.3.4.4 0 0

4.0.0.1/32 10 1/Int. 8 Dut-D

1.3.4.4 0 0/1[NnP]

10.20.1.2/32 10 1/Int. 8 Dut-B

1.2.3.2 0 0/1002[NnP]

10.20.1.3/32 0 1/Int. 5 Dut-C

0.0.0.0 0 0/1003[NnP]

10.20.1.4/32 10 1/Int. 8 Dut-D

1.3.4.4 0 0/1004[NnP]

10.20.1.5/32 [L] 20 1/Int. 11 Dut-B

1.2.3.2 0 0/1005[NnP]

10.21.1.2/32 10 1/Int. 8 Dut-B

1.2.3.2 0 0

10.21.1.3/32 0 1/Int. 5 Dut-C

0.0.0.0 0 0

10.21.1.4/32 10 1/Int. 8 Dut-D

1.3.4.4 0 0

10.21.1.5/32 [L] 20 1/Int. 11 Dut-B

1.2.3.2 0 0

-------------------------------------------------------------------------------

No. of Routes: 16 (16 paths)

-------------------------------------------------------------------------------

Flags : L = LFA nexthop available

SID[F] : R = Re-advertisement

N = Node-SID

nP = no penultimate hop POP

E = Explicit-Null

V = Prefix-SID carries a value

L = value/index has local significance

===============================================================================

*A:Dut-C# show router isis routes ipv4-unicast alternative

===============================================================================

Rtr Base ISIS Instance 0 Route Table (alternative)

===============================================================================

Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname

NextHop MT AdminTag/SID[F]

Alt-Nexthop Alt- Alt-Type

Metric

-------------------------------------------------------------------------------

1.2.3.0/24 10 1/Int. 8 Dut-C

0.0.0.0 0 0

1.2.4.0/24 20 1/Int. 8 Dut-D

1.3.4.4 0 0

1.2.5.0/24 20 1/Int. 8 Dut-B

1.2.3.2 0 0

1.3.4.0/24 10 1/Int. 8 Dut-C

0.0.0.0 0 0

1.3.5.0/24 30 1/Int. 11 Dut-B

1.2.3.2 0 0

1.3.4.4(L) 30 NP

1.4.5.0/24 20 1/Int. 8 Dut-D

1.3.4.4 0 0

2.3.4.0/24 40 1/Int. 11 Dut-D

1.3.4.4 0 0

4.0.0.1/32 10 1/Int. 8 Dut-D

1.3.4.4 0 0/1[NnP]

10.20.1.2/32 10 1/Int. 8 Dut-B

1.2.3.2 0 0/1002[NnP]

10.20.1.3/32 0 1/Int. 5 Dut-C

0.0.0.0 0 0/1003[NnP]

10.20.1.4/32 10 1/Int. 8 Dut-D

1.3.4.4 0 0/1004[NnP]

10.20.1.5/32 20 1/Int. 11 Dut-B

1.2.3.2 0 0/1005[NnP]

1.3.4.4(L) 20 NP

10.21.1.2/32 10 1/Int. 8 Dut-B

1.2.3.2 0 0

10.21.1.3/32 0 1/Int. 5 Dut-C

0.0.0.0 0 0

10.21.1.4/32 10 1/Int. 8 Dut-D

1.3.4.4 0 0

10.21.1.5/32 20 1/Int. 11 Dut-B

1.2.3.2 0 0

1.3.4.4(L) 20 NP

-------------------------------------------------------------------------------

No. of Routes: 16 (18 paths)

Flags : L = Loop-Free Alternate nexthop

Alt-Type : LP = linkProtection, NP = nodeProtection

SID[F] : R = Re-advertisement

N = Node-SID

nP = no penultimate hop POP

E = Explicit-Null

V = Prefix-SID carries a value

L = value/index has local significance

===============================================================================

*A:Dut-C#

*A:Dut-C# show router isis routes detail 195.0.0.0/8

===============================================================================

Rtr Base ISIS Instance 0 Route Table (detail)

===============================================================================

Prefix : 195.0.0.0/8

Status : Active Level : 1

NextHop : 1.2.3.2

Metric : 11 Type : Internal

SPF Version : 6 SysID/Hostname : Dut-B

MT : 0 AdminTag : 0

-------------------------------------------------------------------------------

Prefix : 195.0.0.0/8

Status : Active Level : 1

NextHop : 2.2.3.2

Metric : 11 Type : Internal

SPF Version : 6 SysID/Hostname : Dut-B

MT : 0 AdminTag : 0

-------------------------------------------------------------------------------

Prefix : 195.0.0.0/8

Status : Active Level : 1

NextHop : 3.2.3.2

Metric : 11 Type : Internal

SPF Version : 6 SysID/Hostname : Dut-B

MT : 0 AdminTag : 0

-------------------------------------------------------------------------------

Prefix : 195.0.0.0/8

Status : Active Level : 1

NextHop : 4.2.3.2

Metric : 11 Type : Internal

SPF Version : 6 SysID/Hostname : Dut-B

MT : 0 AdminTag : 0

-------------------------------------------------------------------------------

Prefix : 195.0.0.0/8

Status : Active Level : 1

NextHop : 5.2.3.2

Metric : 11 Type : Internal

SPF Version : 7 SysID/Hostname : Dut-B

MT : 0 AdminTag : 0

-------------------------------------------------------------------------------

Prefix : 195.0.0.0/8

Status : Active Level : 1

NextHop : 6.2.3.2

NextHop Status : NHOP discard

Metric : 11 Type : Internal

SPF Version : 7 SysID/Hostname : Dut-B

MT : 0 AdminTag : 0

-------------------------------------------------------------------------------

No. of Routes: 1 (6 paths)

-------------------------------------------------------------------------------

SID[F] : R = Re-advertisement

N = Node-SID

nP = no penultimate hop POP

E = Explicit-Null

V = Prefix-SID carries a value

L = value/index has local significance

===============================================================================

*A:Dut-C#

Sample Output

A:Dut-A# show router isis 0 routes flex-algo all

===============================================================================

Rtr Base ISIS Instance 0 Flex-Algo 128 Route Table

===============================================================================

Prefix[Flags] Metric Lvl/Typ Ver. SysID/Hostname

NextHop MT AdminTag/SID[F]

-------------------------------------------------------------------------------

10.20.1.1/32 0 1/Int. 93 Dut-A

0.0.0.0 0 0/11[NnP]

10.20.1.2/32 200 2/Int. 89 Dut-C

10.10.10.6 0 0/12[NnP]

10.20.1.3/32 100 2/Int. 89 Dut-C

10.10.10.6 0 0/13[NnP]

10.20.1.4/32 300 2/Int. 96 Dut-C

10.10.10.6 0 0/14[RNnP]

-------------------------------------------------------------------------------

No. of Routes: 4 (4 paths)

-------------------------------------------------------------------------------

Flags : L = LFA nexthop available

SID[F] : R = Re-advertisement

N = Node-SID

nP = no penultimate hop POP

E = Explicit-Null

V = Prefix-SID carries a value

L = value/index has local significance

===============================================================================

Table 396: IS-IS Route Output Fields

Label	Description
Prefix	The route prefix and mask.
Metric MT	The route’s metric.
Lvl/Type	Specifies the level (1 or 2) and the route type, Internal (Int) or External (Ext).
Version	SPF version that generated route.
Nexthop	System ID of nexthop, give hostname if possible.
SysID/Hostname	Hostname for the specific system-id.
Status	IS-IS status.
Nexthop Status	The status of the next hop.
SPF Version	The SPF version that generated the route.
MT	The route’s metric.
AdminTag	The number of administrative tags.
No. of Routes	The total number of routes.
SID[F]	The segment identifier flags of a Prefix-SID as defined by IETF segment routing. R: Re-advertisement flag. If set, then the prefix to which this Prefix-SID is attached, has been propagated by the router either from another level (in other words, from level-1 to level-2 or the opposite) or from redistribution (for example, from another protocol). N: Node-SID flag. The N-Flag is set on Prefix-SIDs attached to a router loopback address. nP: no-PHP flag. If set, then the penultimate hop must not pop the Prefix-SID before delivering the packet to the node that advertised the Prefix-SID. E: Explicit-Null Flag. If set, any upstream neighbor of the Prefix-SID originator must replace the Prefix-SID with a Prefix-SID having an Explicit-NULL value (0 for IPv4 and 2 for IPv6) before forwarding the packet. V: Value flag. If set, then the Prefix-SID carries a value (instead of an index). L: Local Flag. If set, then the value/index carried by the Prefix-SID has local significance.

Supported Platforms

All

routes

Syntax

routes [ip-prefix[/prefix-length]] [type] [detail] [alternative] [summary] [exclude-shortcut] [flex-algo {flex-algo-id | all}]

Context

[Tree] (show>router>ospf routes)

Full Contexts

show router ospf routes

Description

This command displays information about OSPF routes.

Parameters

ip-prefix[/prefix-length]—

Displays information about the specified IP prefix and length.

flex-algo-id—

Displays information about the specified flexible algorithm identifier.

Values—

128 to 255

type—

Displays information about the specified type.

Values—

intra-area, inter-area, external-1, external-2, nssa-1, nssa-2

detail—

Displays detailed information about the routes.

alternative—

Displays the level of protection per prefix (ref. show router OSPF routes alternative).

summary—

Displays summarized information about the routes.

exclude-shortcut—

Displays routes without shortcut, in the show>router>ospf context.

flex-algo—

Displays the OSPFv2 routes associated with a segment routing algorithm specified by the flexible algorithm identifier.

all—

Displays the OSPFv2 routes associated with all flexible algorithms.

Output

The following output shows an example of OSPF routes information.

Sample Output

*A:Dut-C# show router ospf routes flex-algo 128

===============================================================================

Rtr Base OSPFv2 Instance 0 Flex-Algo 128 Route Table

===============================================================================

Destination Type(Dest) Stat SID SIDflgs

NHIP NHIF Cost[E2]

-------------------------------------------------------------------------------

10.20.1.2/32 IA (HOST) N (R) 1282 NnP

192.168.1.2 2 200

10.20.1.3/32 IA (HOST) D (R) 1283 NnP

DIRECT 1 0

10.20.1.5/32 IA (HOST) N (R) 1285 NnP

192.168.1.2 2 100

10.20.1.2/0 IA (RTR) N (N)

192.168.1.2 2 200

10.20.1.3/0 IA (RTR) N (N)

10.20.1.5/0 IA (RTR) N (N)

192.168.1.2 2 100

-------------------------------------------------------------------------------

No. of routes found: 6 (5 paths)

Stat: D = direct N = not direct

(RTM stat):(R) = added (F) = add failed

(N) = not added (D) = policy discarded

unnum-xxx: nexthop is unnumbered global interface index xxx

SID Flags : N = Node-SID

nP = no penultimate hop POP

M = Mapping server

E = Explicit-Null

V = Prefix-SID carries a value

L = value/index has local significance

I = Inter Area flag

A = Attached flag

B = Backup flag

===============================================================================

*A:Dut-C#

Supported Platforms

All

routes

Syntax

routes [ip-prefix[/prefix-length]] [type] [detail] [alternative] [summary] [exclude-shortcut]

Context

[Tree] (show>router>ospf3 routes)

Full Contexts

show router ospf3 routes

Description

This command displays information about OSPF routes.

Parameters

ip-prefix[/prefix-length]—

Displays information about the specified IP prefix and length.

type—

Displays information about the specified type.

Values—

intra-area, inter-area, external-1, external-2, nssa-1, nssa-2

detail—

Displays detailed information about the routes.

alternative—

Displays the level of protection per prefix (ref. show router OSPF routes alternative).

summary—

Displays summarized information about the routes.

exclude-shortcut—

Displays routes without shortcut, in the show>router>ospf context.

Output

The following output shows an example of OSPF information.

Sample Output

*A:Dut-C# show router ospf routes

===============================================================================

Rtr Base OSPFv2 Instance 0 Route Table (alternative)

===============================================================================

Destination Type(Dest) Stat SID SIDflgs

NHIP NHIF Cost[E2]

-------------------------------------------------------------------------------

1.1.1.1/32 IA (HOST) N (R)

1.1.3.1 3 1000

1.1.2.0/24 IA (NET) N (R)

1.1.3.1 3 2000

1.2.3.2 4 2000

1.1.3.0/24 IA (NET) D (F)

DIRECT 3 1000

1.2.3.0/24 IA (NET) D (F)

DIRECT 4 1000

1.2.4.0/24 IA (NET) N (R)

2.2.3.2 5 2000

1.3.5.0/24 IA (NET) D (F)

DIRECT 6 1000

1.4.5.0/24 IA (NET) N (R)

1.3.5.5 6 2000

1.4.6.0/24 IE (NET) N (R)

2.2.3.2 5 3000

1.3.5.5 6 3000

1.5.6.0/24 IE (NET) N (R)

1.3.5.5 6 2000

2.2.2.2/32 IA (HOST) N (R)

2.2.3.2 5 1000

2.2.3.0/24 IA (NET) D (F)

DIRECT 5 1000

3.3.3.3/32 IA (HOST) D (F)

DIRECT 2 0

4.4.4.4/32 IA (HOST) N (R)

2.2.3.2 5 2000

1.3.5.5 6 2000

5.5.5.5/32 IA (HOST) N (R)

1.3.5.5 6 1000

6.6.6.6/32 IE (HOST) N (R)

1.3.5.5 6 2000

10.20.1.1/32 IA (HOST) N (R) 11 NnP

1.1.3.1 3 1000

10.20.1.2/32 IA (HOST) N (R) 22 NnP

2.2.3.2 5 1000

10.20.1.3/32 IA (HOST) D (F) 33 NnP

DIRECT 1 0

10.20.1.4/32 IA (HOST) N (R) 44 NnP

2.2.3.2 5 2000

1.3.5.5 6 2000

10.20.1.5/32 IA (HOST) N (R) 55 NnP

1.3.5.5 6 1000

10.20.1.6/32 IE (HOST) N (R) 66 NnP

1.3.5.5 6 2000

10.20.1.1/0 IA (RTR) N (N)

1.1.3.1 3 1000

10.20.1.2/0 IA (AB-AS) N (N)

2.2.3.2 5 1000

10.20.1.2/0 IA (AB-AS) N (N)

1.2.3.2 4 1000

10.20.1.4/0 IA (AB-AS) N (N)

2.2.3.2 5 2000

1.3.5.5 6 2000

10.20.1.5/0 IA (AB-AS) N (N)

1.3.5.5 6 1000

-------------------------------------------------------------------------------

No. of routes found: 26 (31 paths)

Stat: D = direct N = not direct

(RTM stat):(R) = added (F) = add failed

(N) = not added (D) = policy discarded

SID Flags : N = Node-SID

nP = no penultimate hop POP

M = Mapping server

E = Explicit-Null

V = Prefix-SID carries a value

L = value/index has local significance

I = Inter Area flag

A = Attached flag

===============================================================================

*A:Dut-C# show router ospf routes

===============================================================================

Rtr Base OSPFv2 Instance 0 Routing Table

===============================================================================

Destination Type(Dest) Stat SID SIDflgs

NHIP NHIF Cost[E2]

-------------------------------------------------------------------------------

1.1.1.1/32 IA (HOST) N (R)

1.1.3.1 3 1000

1.1.2.0/24 IA (NET) N (R)

1.1.3.1 3 2000

1.2.3.2 4 2000

1.1.3.0/24 IA (NET) D (F)

DIRECT 3 1000

1.2.3.0/24 IA (NET) D (F)

DIRECT 4 1000

1.2.4.0/24 IA (NET) N (R)

2.2.3.2 5 2000

1.3.5.0/24 IA (NET) D (F)

DIRECT 6 1000

1.4.5.0/24 IA (NET) N (R)

1.3.5.5 6 2000

1.4.6.0/24 IE (NET) N (R)

2.2.3.2 5 3000

1.3.5.5 6 3000

1.5.6.0/24 IE (NET) N (R)

1.3.5.5 6 2000

2.2.2.2/32 IA (HOST) N (R)

2.2.3.2 5 1000

2.2.3.0/24 IA (NET) D (F)

DIRECT 5 1000

3.3.3.3/32 IA (HOST) D (F)

DIRECT 2 0

4.4.4.4/32 IA (HOST) N (R)

2.2.3.2 5 2000

1.3.5.5 6 2000

5.5.5.5/32 IA (HOST) N (R)

1.3.5.5 6 1000

6.6.6.6/32 IE (HOST) N (R)

1.3.5.5 6 2000

10.20.1.1/32 IA (HOST) N (R) 11 NnP

1.1.3.1 3 1000

10.20.1.2/32 IA (HOST) N (R) 22 NnP

2.2.3.2 5 1000

10.20.1.3/32 IA (HOST) D (F) 33 NnP

DIRECT 1 0

10.20.1.4/32 IA (HOST) N (R) 44 NnP

2.2.3.2 5 2000

1.3.5.5 6 2000

10.20.1.5/32 IA (HOST) N (R) 55 NnP

1.3.5.5 6 1000

10.20.1.6/32 IE (HOST) N (R) 66 NnP

1.3.5.5 6 2000

10.20.1.1/0 IA (RTR) N (N)

1.1.3.1 3 1000

10.20.1.2/0 IA (AB-AS) N (N)

2.2.3.2 5 1000

10.20.1.2/0 IA (AB-AS) N (N)

1.2.3.2 4 1000

10.20.1.4/0 IA (AB-AS) N (N)

2.2.3.2 5 2000

1.3.5.5 6 2000

10.20.1.5/0 IA (AB-AS) N (N)

1.3.5.5 6 1000

-------------------------------------------------------------------------------

No. of routes found: 26 (31 paths)

Stat: D = direct N = not direct

(RTM stat):(R) = added (F) = add failed

(N) = not added (D) = policy discarded

SID Flags : N = Node-SID

nP = no penultimate hop POP

M = Mapping server

E = Explicit-Null

V = Prefix-SID carries a value

L = value/index has local significance

I = Inter Area flag

A = Attached flag

===============================================================================

*A:Dut-C# show router ospf routes alternative

===============================================================================

Rtr Base OSPFv2 Instance 0 Route Table (alternative)

===============================================================================

Destination Type(Dest) Stat SID SIDflgs

NHIP NHIF Cost[E2]

A-NHIP(L) A-NHIF A-Cost[E2]

-------------------------------------------------------------------------------

1.1.1.1/32 IA (HOST) N (R)

1.1.3.1 3 1000

1.2.3.2(L) 4 2000

1.1.2.0/24 IA (NET) N (R)

1.1.3.1 3 2000

1.2.3.2 4 2000

1.1.3.0/24 IA (NET) D (F)

DIRECT 3 1000

1.2.3.0/24 IA (NET) D (F)

DIRECT 4 1000

1.2.4.0/24 IA (NET) N (R)

2.2.3.2 5 2000

1.3.5.0/24 IA (NET) D (F)

DIRECT 6 1000

1.4.5.0/24 IA (NET) N (R)

1.3.5.5 6 2000

1.4.6.0/24 IE (NET) N (R)

2.2.3.2 5 3000

1.3.5.5 6 3000

1.5.6.0/24 IE (NET) N (R)

1.3.5.5 6 2000

2.2.2.2/32 IA (HOST) N (R)

2.2.3.2 5 1000

2.2.3.0/24 IA (NET) D (F)

DIRECT 5 1000

3.3.3.3/32 IA (HOST) D (F)

DIRECT 2 0

4.4.4.4/32 IA (HOST) N (R)

2.2.3.2 5 2000

1.3.5.5 6 2000

5.5.5.5/32 IA (HOST) N (R)

1.3.5.5 6 1000

6.6.6.6/32 IE (HOST) N (R)

1.3.5.5 6 2000

10.20.1.1/32 IA (HOST) N (R) 11 NnP

1.1.3.1 3 1000

1.2.3.2(L) 4 2000

10.20.1.2/32 IA (HOST) N (R) 22 NnP

2.2.3.2 5 1000

10.20.1.3/32 IA (HOST) D (F) 33 NnP

DIRECT 1 0

10.20.1.4/32 IA (HOST) N (R) 44 NnP

2.2.3.2 5 2000

1.3.5.5 6 2000

10.20.1.5/32 IA (HOST) N (R) 55 NnP

1.3.5.5 6 1000

10.20.1.6/32 IE (HOST) N (R) 66 NnP

1.3.5.5 6 2000

10.20.1.1/0 IA (RTR) N (N)

1.1.3.1 3 1000

10.20.1.2/0 IA (AB-AS) N (N)

2.2.3.2 5 1000

10.20.1.2/0 IA (AB-AS) N (N)

1.2.3.2 4 1000

10.20.1.4/0 IA (AB-AS) N (N)

2.2.3.2 5 2000

1.3.5.5 6 2000

10.20.1.5/0 IA (AB-AS) N (N)

1.3.5.5 6 1000

-------------------------------------------------------------------------------

No. of routes found: 26 (31 paths)

Flags: L = Loop-Free Alternate nexthop

Stat: D = direct N = not direct

(RTM stat):(R) = added (F) = add failed

(N) = not added (D) = policy discarded

SID Flags : N = Node-SID

nP = no penultimate hop POP

M = Mapping server

E = Explicit-Null

V = Prefix-SID carries a value

L = value/index has local significance

I = Inter Area flag

A = Attached flag

===============================================================================

*A:Dut-C# show router ospf routes alternative detail

===============================================================================

Rtr Base OSPFv2 Instance 0 Route Table (alternative) (detail)

===============================================================================

Destination Type(Dest) Stat SID SIDflgs

NHIP NHIF Cost[E2] Area Type Weight:Cfg/Norm

A-NHIP(L) A-NHIF A-Cost[E2] A-Type PGID

-------------------------------------------------------------------------------

1.1.1.1/32 IA (HOST) N (R)

1.1.3.1 3 1000 0.0.0.1

1.2.3.2(L) 4 2000 LINK 0x410079

1.1.2.0/24 IA (NET) N (R)

1.1.3.1 3 2000 0.0.0.1

1.2.3.2 4 2000 0.0.0.1

1.1.3.0/24 IA (NET) D (F)

DIRECT 3 1000 0.0.0.1

1.2.3.0/24 IA (NET) D (F)

DIRECT 4 1000 0.0.0.1

1.2.4.0/24 IA (NET) N (R)

2.2.3.2 5

===============================================================================

*A:Dut-C# show router ospf 1 routes exclude-shortcut alternative detail

=======================================================================

Rtr Base OSPFv2 Instance 1 Route Table (excl-shortcut) (alternative) (detail)

=======================================================================

Destination Type(Dest) Stat

NHIP NHIF Cost[E2] Area Tunnel-Information

A-NHIP(L) A-NHIF A-Cost[E2] A-Type PGID

-----------------------------------------------------------------------

1.1.2.0/24 IA (NET) N (R)

1.1.3.1 3 20 0.0.0.0

1.2.3.2 4 20 0.0.0.0

1.1.3.0/24 IA (NET) D (F)

DIRECT 3 10 0.0.0.0

1.2.3.0/24 IA (NET) D (F)

DIRECT 4 10 0.0.0.0

1.2.4.0/24 IA (NET) N (R)

1.2.3.2 4 20 0.0.0.0

1.3.5.0/24 IA (NET) D (F)

DIRECT 5 10 0.0.0.0

1.4.5.0/24 IA (NET) N (R)

1.3.5.5 5 20 0.0.0.0

1.4.6.0/24 IA (NET) N (R)

1.2.3.2 4 30 0.0.0.0

1.3.5.5 5 30 0.0.0.0

10.20.1.1/32 IA (HOST) N (R)

1.1.3.1 3 10 0.0.0.0

10.20.1.2/32 IA (HOST) N (R)

1.2.3.2 4 10 0.0.0.0

10.20.1.3/32 IA (HOST) D (F)

DIRECT 1 0 0.0.0.0

10.20.1.4/32 IA (HOST) N (R)

1.2.3.2 4 20 0.0.0.0

1.3.5.5 5 20 0.0.0.0

10.20.1.5/32 IA (HOST) N (R)

1.3.5.5 5 10 0.0.0.0

10.20.1.6/32 IA (HOST) N (R)

1.2.3.2 4 30 0.0.0.0

1.3.5.5 5 30 0.0.0.0

10.20.1.1/0 IA (RTR) N (N)

1.1.3.1 3 10 0.0.0.0

10.20.1.2/0 IA (RTR) N (N)

1.2.3.2 4 10 0.0.0.0

10.20.1.4/0 IA (RTR) N (N)

1.2.3.2 4 20 0.0.0.0

1.3.5.5 5 20 0.0.0.0

10.20.1.5/0 IA (RTR) N (N)

1.3.5.5 5 10 0.0.0.0

10.20.1.6/0 IA (RTR) N (N)

1.2.3.2 4 30 0.0.0.0

1.3.5.5 5 30 0.0.0.0

-----------------------------------------------------------------------

No. of routes found: 18 (24 paths)

Flags: L = Loop-Free Alternate nexthop

Stat: D = direct N = not direct

(RTM stat):(R) = added (F) = add failed

(N) = not added (D) = policy discarded

=======================================================================

*A:Dut-C#

*A:Dut-A# show router ospf routes alternative detail

=======================================================================

Rtr Base OSPFv2 Instance 0 Route Table (alternative) (detail)

=======================================================================

Destination Type(Dest) Stat

NHIP NHIF Cost[E2] Area Tunnel-Information

A-NHIP(L) A-NHIF A-Cost[E2] A-Type PGID

-----------------------------------------------------------------------

1.1.2.0/24 IA (NET) D (F)

DIRECT 2 10 0.0.0.0

1.1.3.0/24 IA (NET) D (F)

DIRECT 3 10 0.0.0.0

1.2.3.0/24 IA (NET) N (R)

1.1.2.2 2 20 0.0.0.0

1.1.3.3 3 20 0.0.0.0

1.2.4.0/24 IA (NET) N (R)

1.1.2.2 2 20 0.0.0.0

1.1.3.3(L) 3 30 LINK 0x130015

1.3.5.0/24 IA (NET) N (R)

1.1.3.3 3 20 0.0.0.0

1.1.2.2(L) 2 30 LINK 0x130016

1.4.5.0/24 IA (NET) N (R)

1.1.2.2 2 30 0.0.0.0

1.1.3.3 3 30 0.0.0.0

1.4.6.0/24 IA (NET) N (R)

1.1.2.2 2 30 0.0.0.0

1.1.3.3(L) 3 40 LINK 0x130015

1.5.6.0/24 IA (NET) N (R)

1.1.3.3 3 30 0.0.0.0

1.1.2.2(L) 2 40 LINK 0x130016

10.20.1.1/32 IA (HOST) D (F)

DIRECT 1 0 0.0.0.0

10.20.1.2/32 IA (HOST) N (R)

1.1.2.2 2 10 0.0.0.0

1.1.3.3(L) 3 20 LINK 0x130015

10.20.1.3/32 IA (HOST) N (R)

1.1.3.3 3 10 0.0.0.0

1.1.2.2(L) 2 20 LINK 0x130016

10.20.1.4/32 IA (HOST) N (R)

1.1.2.2 2 20 0.0.0.0

1.1.3.3(L) 3 30 LINK 0x130015

10.20.1.5/32 IA (HOST) N (R)

1.1.3.3 3 20 0.0.0.0

1.1.2.2(L) 2 30 LINK 0x130016

10.20.1.3/0 IA (RTR) N (N)

1.1.3.3 3 10 0.0.0.0

10.20.1.4/0 IA (RTR) N (N)

1.1.2.2 2 20 0.0.0.0

10.20.1.5/0 IA (RTR) N (N)

1.1.3.3 3 20 0.0.0.0

10.20.1.6/0 IA (RTR) N (N)

1.1.3.3 3 30 0.0.0.0

1.1.2.2 2 30 0.0.0.0

-----------------------------------------------------------------------

19 OSPFv2 routes found (23 paths)

Flags: L = Loop-Free Alternate nexthop

=======================================================================

*A:Dut-C# show router ospf 1 routes 10.0.0.2/32 detail

================================================================================

Rtr Base OSPFv2 Instance 1 Routing Table (detail)

================================================================================

Destination Type(Dest) Stat

NHIP NHIF Cost[E2] Area Type Weight:Cfg/Norm

--------------------------------------------------------------------------------

10.0.0.2/32 E2 (HOST) N (R)

1.0.0.3 RSVP:94 9:10 0.0.0.0 Shortcut 40/20

1.0.0.3 RSVP:61442 9:10 0.0.0.0 Shortcut 2/ 1

--------------------------------------------------------------------------------

No. of routes found: 1 (2 paths)

Stat: D = direct N = not direct

(RTM stat):(R) = added (F) = add failed

(N) = not added (D) = policy discarded

================================================================================

*A:Dut-C>config>router>ospf3# show router ospf3 0 routes

===============================================================================

Rtr Base OSPFv3 Instance 0 Route Table

===============================================================================

Destination Type(Dest) Stat

SID SID flags

NHIP NHIF Cost[E2]

-------------------------------------------------------------------------------

3ffe::100:900/120 IA (STUB) D (F)

DIRECT 4 200

3ffe::100:b01/128 IA (HOST) N (R)

4 NnPA

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 100

3ffe::100:c00/120 IA (STUB) N (R)

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200

3ffe::100:d00/120 IA (STUB) D (F)

DIRECT 2 100

3ffe::100:1602/128 IA (HOST) N (R)

5 NnPA

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200

3ffe::100:1800/120 IE (NET) N (R)

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300

3ffe::100:1a00/120 IE (NET) N (R)

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200

3ffe::100:2103/128 IA (HOST) D (F)

0 NnPA

DIRECT 5 0

3ffe::100:2400/120 IA (STUB) D (F)

DIRECT 3 100

3ffe::100:2c04/128 IE (HOST) N (R)

1 NnP

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300

3ffe::100:2d00/120 IE (NET) N (R)

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 300

3ffe::100:3705/128 IE (HOST) N (R)

2 NnP

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200

3ffe::100:3800/120 IE (NET) N (R)

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200

3ffe::100:4206/128 IA (HOST) N (R)

3 NnPA

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 100

3ffe::a14:101/128 IA (HOST) N (R)

10 NnPA

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 100

3ffe::a14:102/128 IE (HOST) N (R)

11 NnPA

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200

3ffe::a14:103/128 IA (HOST) D (F)

6 NnPA

DIRECT 1 0

3ffe::a14:104/128 IE (HOST) N (R)

7 NnP

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300

3ffe::a14:105/128 IE (HOST) N (R)

8 NnP

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200

3ffe::a14:106/128 IE (HOST) N (R)

9 NnPA

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 100

3ffe::3300:b01/128 IA (HOST) N (R)

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 100

3ffe::3300:c00/120 IA (STUB) N (R)

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200

3ffe::3300:d00/120 IA (STUB) D (F)

DIRECT 2 100

3ffe::3300:1602/128 IA (HOST) N (R)

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200

3ffe::3300:1800/120 IE (NET) N (R)

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300

3ffe::3300:1a00/120 IE (NET) N (R)

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200

3ffe::3300:2103/128 IA (HOST) D (F)

DIRECT 5 0

3ffe::3300:2400/120 IA (STUB) D (F)

DIRECT 3 100

3ffe::3300:2c04/128 IE (HOST) N (R)

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300

3ffe::3300:2d00/120 IE (NET) N (R)

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 300

3ffe::3300:3705/128 IE (HOST) N (R)

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200

3ffe::3300:3800/120 IE (NET) N (R)

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200

3ffe::3300:4206/128 IA (HOST) N (R)

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 100

3ffe::6800:1/128 E2 (HOST) N (R)

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300:1

3ffe::6900:1/128 E2 (HOST) N (R)

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200:1

10.20.1.1/0 IA (RTR) N (N)

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 100

10.20.1.2/0 IA (AB-AS) N (N)

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 200

10.20.1.4/0 IE (ASBR) N (N)

fe80::200:ff:fe00:1-"DUTC_TO_DUTA.1.0" 2 300

10.20.1.5/0 IE (ASBR) N (N)

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 200

10.20.1.6/0 IA (AB-AS) N (N)

fe80::200:ff:fe00:6-"DUTC_TO_DUTF.1.0" 3 100

-------------------------------------------------------------------------------

No. of routes found: 40 (40 paths)

Stat: D = direct N = not direct

(RTM stat):(R) = added (F) = add failed

(N) = not added (D) = policy discarded

SID Flags : N = Node-SID

nP = no penultimate hop POP

M = Mapping server

E = Explicit-Null

V = Prefix-SID carries a value

L = value/index has local significance

I = Inter Area flag

A = Attached flag

B = Backup flag

===============================================================================

*A:Dut-C# show router ospf3 31 routes detail

===============================================================================

Rtr Base OSPFv3 Instance 31 Route Table (detail)

===============================================================================

Destination Type(Dest) Stat

NHIP NHIF Cost[E2] Area

-------------------------------------------------------------------------------

3ffe::10:10:2:0/120 IA (NET) D (F)

DIRECT 2 1000 0.0.0.0

3ffe::10:10:3:0/120 IA (NET) D (F)

DIRECT 3 1000 0.0.0.0

3ffe::10:10:4:0/120 IA (NET) N (R)

fe80::2052:1ff:fe01:3-"ip-10.10.3.3" 3 2000 0.0.0.0

3ffe::10:10:5:0/120 IA (NET) D (F)

DIRECT 4 1000 0.0.0.0

3ffe::10:10:6:0/120 IA (NET) N (R)

fe80::205e:1ff:fe01:1-"ip-10.10.5.3" 4 2000 0.0.0.0

3ffe::10:10:9:0/120 IA (NET) N (R)

10.20.1.4 (SC) RSVP:1 3000 0.0.0.0

3ffe::10:10:13:0/120 IA (STUB) N (R)

fe80::6628:1ff:fe01:2-"ip-10.10.2.3" 2 2000 0.0.0.0

3ffe::10:10:14:0/120 IA (STUB) N (R)

10.20.1.4 (SC) RSVP:1 4000 0.0.0.0

3ffe::10:20:1:1/128 IA (HOST) N (R)

fe80::6628:1ff:fe01:2-"ip-10.10.2.3" 2 1000 0.0.0.0

3ffe::10:20:1:2/128 IA (HOST) N (R)

fe80::2052:1ff:fe01:3-"ip-10.10.3.3" 3 1000 0.0.0.0

3ffe::10:20:1:3/128 IA (HOST) D (F)

DIRECT 1 0 0.0.0.0

3ffe::10:20:1:4/128 IA (HOST) N (R)

10.20.1.4 (SC) RSVP:1 2000 0.0.0.0

3ffe::10:20:1:5/128 IA (HOST) N (R)

fe80::205e:1ff:fe01:1-"ip-10.10.5.3" 4 1000 0.0.0.0

3ffe::10:20:1:6/128 IA (HOST) N (R)

10.20.1.4 (SC) RSVP:1 3000 0.0.0.0

3ffe::100:100:100:4/128 IA (HOST) N (R)

10.20.1.4 (SC) RSVP:1 2000 0.0.0.0

3ffe::100:100:100:6/128 IA (HOST) N (R)

10.20.1.4 (SC) RSVP:1 3000 0.0.0.0

10.20.1.1/0 IA (RTR) N (N)

fe80::6628:1ff:fe01:2-"ip-10.10.2.3" 2 1000 0.0.0.0

10.20.1.2/0 IA (RTR) N (N)

fe80::2052:1ff:fe01:3-"ip-10.10.3.3" 3 1000 0.0.0.0

10.20.1.4/0 IA (RTR) N (N)

10.20.1.4 (SC) RSVP:1 2000 0.0.0.0

10.20.1.5/0 IA (RTR) N (N)

fe80::205e:1ff:fe01:1-"ip-10.10.5.3" 4 1000 0.0.0.0

10.20.1.6/0 IA (RTR) N (N)

10.20.1.4 (SC) RSVP:1 3000 0.0.0.0

-------------------------------------------------------------------------------

No. of routes found: 21 (21 paths)

Stat: D = direct N = not direct

(RTM stat):(R) = added (F) = add failed

(N) = not added (D) = policy discarded

===============================================================================

*A:Dut-C#

*A:Dut-C# show router ospf3 20 status

===============================================================================

Rtr Base OSPFv3 Instance 20 Status

===============================================================================

OSPF Cfg Router Id : 10.20.1.3

OSPF Oper Router Id : 10.20.1.3

OSPF Version : 3

OSPF Admin Status : Enabled

OSPF Oper Status : Enabled

Graceful Restart : Disabled

GR Helper Mode : Disabled

GR Strict LSA Checking : Enabled (operational down)

Preference : 10

External Preference : 150

Backbone Router : True

Area Border Router : False

AS Border Router : False

Traffic Engineering Support : False

Demand Exts Support : False

In Overload State : False

In External Overflow State : False

Exit Overflow Interval : 0

Last Overflow Entered : Never

Last Overflow Exit : Never

External LSA Limit : -1

Reference Bandwidth : 100,000,000 Kbps

Init SPF Delay : 1000 msec

Sec SPF Delay : 1000 msec

Max SPF Delay : 10000 msec

Min LS Arrival Interval : 1000 msec

Init LSA Gen Delay : 5000 msec

Sec LSA Gen Delay : 5000 msec

Max LSA Gen Delay : 5000 msec

Lsa accumulate : 1000 msec

Redistribute delay : 1000 msec

Incremental SPF wait : 1000 msec

Last Ext SPF Run : Never

Ext LSA Cksum Sum : 0x0

OSPF Last Enabled : 10/10/2018 20:22:05

Unicast Import : True

Multicast Import : False

Export Policies : None

Import Policies : None

Lfa Policies : None

OSPF Ldp Sync Admin Status : Enabled

LDP-over-RSVP : Disabled

IGP-Shortcut : Enabled

IPv6 IGP SC Tunn-Nhop : Res-Filter(RSVP)

Advertise-Tunnel-Link : Disabled

LFA : Disabled

Remote-LFA : Disabled

Max PQ Cost : 65535

TI-LFA : Disabled

Max SR FRR Labels : 2

Export Limit : 0

Export Limit Log Percent : 0

Total Exp Routes : 0

RIB-priority-high prefix list: None

Segment Routing : Disabled

Extended LSA : sparse

===============================================================================

Supported Platforms

All

routes

Syntax

routes

Context

[Tree] (show>router>nat>inside routes)

Full Contexts

show router nat inside routes

Description

This command displays about inside NAT routes .

Output

The following is an example of a NAT inside routes. Table 397 provides NAT inside routes descriptions.

Sample Output

*A:Dut-C# /show router 101 nat inside routes

===============================================================================

NAT Inside Routes

===============================================================================

Router Route Address Prefix

NAT Policy Type

-------------------------------------------------------------------------------

vprn101 200.0.0.0 16

static

vprn101 200.1.0.0 16

n44Pool2-1 static

vprn101 210.0.1.0 24

n44Pool1-1 dynamic

vprn101 210.1.1.0 24

n44Pool2-1 dynamic

vprn101 210.6.1.0 24

n44Pool7-1 dynamic

vprn101 210.7.1.0 24

n44Pool8-1 dynamic

-------------------------------------------------------------------------------

No. of routes: 6

===============================================================================

Table 397: NAT Inside Routes

Label	Description
Router	The router name
Route Address	The route address
NAT Policy	The NAT policy name
Prefix	The router prefix
Type	The router type; dynamic or static

19.50. routing

routing

Syntax

routing [sub-domain sub-domain] [bsl bsl] [neighbor-prefix ip-address] [dest-prefix ip-address]

Context

[Tree] (show>router>bier routing)

Full Contexts

show router bier routing

Description

This command shows the BIER routing table.

Parameters

sub-domain—

Specifies a sub-domain.

Values—

0 to 255

bsl—

Specifies a bit string length.

Values—

256 to 1024

ip-address—

Specifies a prefix in IP address format.

Output

The following is an example of a BIER router table. Table 398 provides BIER routing field descriptions.

Sample Output

*A:Dut-A# show router bier routing sub-domain 0

===============================================================================

Destination Prefix Bfr-ID Age

Neighbor

Nexthop

Interface

-------------------------------------------------------------------------------

===============================================================================

BIER Routing Database Sub-Domain 0 BSL 256

===============================================================================

10.20.1.2 2 0d 23:05:23

10.20.1.2

10.180.1.2

ip-10.180.1.1

10.20.1.3 3 0d 23:05:20

10.20.1.2

10.180.1.2

ip-10.180.1.1

10.20.1.4 0 0d 23:05:20

10.20.1.2

10.180.1.2

ip-10.180.1.1

10.20.1.5 5 0d 23:05:16

10.20.1.2

10.180.1.2

ip-10.180.1.1

10.20.1.6 6 0d 23:05:16

10.20.1.2

10.180.1.2

ip-10.180.1.1

===============================================================================

Total (Sub-Domain 0): 5

===============================================================================

Total BIER Routing entries : 5

===============================================================================

*A:Dut-A#

Table 398: BIER Routing Fields

Label	Description
Destination Prefix	The destination prefix
BFR-ID	The BFR ID
Age	The tunnel age
Neighbor	The neighbor IP address
Nexthop	The next-hop IP address
Interface	The egress interface name for the programmed tunnel

Supported Platforms

All

19.51. rp

rp

Syntax

rp [family | ip-address]

Context

[Tree] (show>router>pim rp)

Full Contexts

show router pim rp

Description

This command displays the rendezvous point (RP) set information built by the router.

Parameters

family—

Displays information about RP family.

Values—

ipv4, ipv6

ip-address —

Specifies the IP address of the RP.

Output

The following is an example of a PIM RP configuration.

Sample Output

A:ALA-1# show router pim rp

==================================================================

PIM RP Set

==================================================================

Group Address RP Address Type Priority Holdtime

------------------------------------------------------------------

224.0.0.0/4 239.200.200.4 Dynamic 192 150

10.1.7.1 Static 1 N/A

------------------------------------------------------------------

Group Prefixes : 1

==================================================================

A:ALA-1#

A:ALA-1# show router pim rp 10.1.7.1

==================================================================

PIM RP Set

==================================================================

Group Address RP Address Type Priority Holdtime

------------------------------------------------------------------

224.0.0.0/4 10.1.7.1 Static 1 N/A

------------------------------------------------------------------

Group Prefixes : 1

==================================================================

A:ALA-1#

Table 399: PIM RP Fields

Label	Description
Group Address	The multicast group address of the entry.
RP Address	The address of the Rendezvous Point (RP)
Type	Displays whether the entry was learned through the Bootstrap mechanism or if it was statically configured.
Priority	The priority for the specified group address. The higher the value, the higher the priority.
Holdtime	The value of the hold time present in the BSM message

Supported Platforms

All

19.52. rp-hash

rp-hash

Syntax

rp-hash ip-address

Context

[Tree] (show>router>pim rp-hash)

Full Contexts

show router pim rp-hash

Description

This command hashes the RP for the specified group from the RP set.

Parameters

ip-address—

Displays specific multicast group addresses.

Output

The following is an example of a PIM RP-Hash configuration. Table 400 provides RP-Hash output field descriptions.

Sample Output

A:ALA-1# show router pim rp-hash 239.101.0.0

==============================================

PIM Group-To-RP mapping

==============================================

Group Address RP Address Type

----------------------------------------------

239.101.0.0 239.200.200.4 Bootstrap

==============================================

A:ALA-1#

A:ALA-1# show router pim rp-hash 239.101.0.6

==============================================

PIM Group-To-RP mapping

==============================================

Group Address RP Address Type

----------------------------------------------

239.101.0.6 239.200.200.4 Bootstrap

==============================================

A:ALA-1#

Table 400: RP-Hash Fields

Label	Description
Group Address	The multicast group address of the entry
RP Address	The address of the Rendezvous Point (RP)
Type	Specifies whether the entry was learned through the Bootstrap mechanism or if it was statically configured.

Supported Platforms

All

19.53. rpki-session

rpki-session

Syntax

rpki-session [ip-address] [detail]

Context

[Tree] (show>router>origin-validation rpki-session)

Full Contexts

show router origin-validation rpki-session

Description

This command displays RPKI session information.

Parameters

ip-address—

Displays RPKI session information for the specified IP address.

Values—

ipv4-address:

a.b.c.d

ipv6-address

x:x:x:x:x:x:x:x

x:x:x:x:x:x:d.d.d.d

where:

x: [0 to FFFF]H

d: [0 to 255]D

interface: 32 chars max, and mandatory for link local addresses.

detail—

Displays the longer, more detailed version of the output.

Output

The following output is an example of RPKI session information.

Sample Output

A:Dut-C# show router origin-validation rpki-session detail

===============================================================================

RPKI Session Information

===============================================================================

IP Address : 10.168.1.1

Description : RPKI Server #1

-------------------------------------------------------------------------------

Port : 323 Oper State : established

Uptime : 0d 00:57:41 Flaps : 0

Active IPv4 Records: 17023 Active IPv6 Records: 2515

Admin State : Up Local Address : n/a

Admin State : Up Local Address : 10.0.2.2

Hold Time : 120 Refresh Time : 60

Stale Route Time : 3600 Connect Retry : 120

Serial ID : 41690 Session ID : 1452020198

===============================================================================

No. of Sessions : 1

===============================================================================

Supported Platforms

All

19.54. rs-fec

rs-fec

Syntax

rs-fec [clear]

Context

[Tree] (tools>dump>port rs-fec)

Full Contexts

tools dump port rs-fec

Description

This command dumps the Reed-Solomon Forward Error Correction (RS-FEC) information for port.

Supported Platforms

All

19.55. rsb

rsb

Syntax

rsb

Context

[Tree] (tools>dump>router>rsvp rsb)

Full Contexts

tools dump router rsvp rsb

Description

This command displays RSVP RSB information.

Output

The following output is an example of MPLS RSVP RSB detail fields.

Sample Output

4)*A:Dut-A>config>router>mpls>lsp$ /tools dump router rsvp rsb detail

-----------------------------------------------------------------------

RSB:

EndPt 10.20.1.4 Tid 61441 XTid 10.20.1.1 Sndr 10.20.1.1 LspId 2 ifIndex 3 NHop

10.20.1.3

Style FF, refresh in 0 secs

RSVP NextHop 10.20.1.3, LIH 3 (TLV: RtrId 10.20.1.3 IntfId 2)

CT Shared Reservation Info:

No Reservation:

FlowSpec :Flags 0x8000 QOSC 1, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps)

CBS 0, EBS 0, RSpecR 0, RSpecS 0 MTU 1500 MPU 20

FwdFlowspec :Flags 0x0 QOSC 0, PDR (0.000 bps), PBS 0.000 bps, CDR (0.000 bps)

CBS 0, EBS 0, RSpecR 0, RSpecS 0 MPU 0

FilterSpec:

Timeout in : 26 secs, LocLabel: 0 Sender: 10.20.1.1 lspId: 2 OutIfId: 0

RRO :

(1) * Flags : 0x0 : U

(1) * UnInf : 10.20.1.3, 2

(2) * Flags : 0x1 : Global

(2) * Label : 131070

(3) * Flags : 0x0 : U

(3) * UnInf : 10.20.1.4, 5

(4) * Flags : 0x1 : Global

(4) * Label : 131070

-----------------------------------------------------------------------

RSB:

EndPt 10.20.1.6 Tid 1 XTid 10.20.1.1 Sndr 0.0.0.0 LspId 0 ifIndex 2 NHop

10.20.1.2

Style SE, refresh in 0 secs

RSVP NextHop 10.20.1.2, LIH 2 (TLV: RtrId 10.20.1.2 IntfId 2)

CT Shared Reservation Info:

No Reservation:

FlowSpec :Flags 0x8000 QOSC 1, PDR (infinity), PBS 0.000 bps, CDR (0.000 bps)

CBS 0, EBS 0, RSpecR 0, RSpecS 0 MTU 1496 MPU 20

FwdFlowspec :Flags 0x0 QOSC 0, PDR (0.000 bps), PBS 0.000 bps, CDR (0.000 bps)

CBS 0, EBS 0, RSpecR 0, RSpecS 0 MPU 0

FilterSpec:

Timeout in : 21 secs, LocLabel: 0 Sender: 10.20.1.1 lspId: 30208 OutIfId: 0

RRO :

(1) * Flags : 0x9 : U LP_AVAIL NODE

(1) * UnInf : 10.20.1.2, 2

(2) * Flags : 0x1 : Global

(2) * Label : 131071

(3) * Flags : 0x1 : U LP_AVAIL

(3) * UnInf : 10.20.1.4, 2

(4) * Flags : 0x1 : Global

(4) * Label : 131071

(5) * Flags : 0x0 : U

(5) * UnInf : 10.20.1.6, 2

(6) * Flags : 0x1 : Global

(6) * Label : 131071

-----------------------------------------------------------------------

Total RSB Count : 2

Supported Platforms

All

19.56. rsvp

rsvp

Syntax

rsvp

Context

[Tree] (clear>router rsvp)

Full Contexts

clear router rsvp

Description

Commands in this context clear and reset RSVP protocol entities.

Supported Platforms

All

rsvp

Syntax

rsvp

Context

[Tree] (show>router rsvp)

Full Contexts

show router rsvp

Description

Commands in this context display RSVP related information.

Supported Platforms

All

rsvp

Syntax

rsvp

Context

[Tree] (tools>dump>router rsvp)

Full Contexts

tools dump router rsvp

Description

Commands in this context dump tools for RSVP.

Supported Platforms

All

19.57. rtp-session

rtp-session

Syntax

rtp-session [service service-id] [source ip-address] [detail [stats {rt-server | fcc-server}]]

rtp-session [service service-id] summary

Context

[Tree] (show>video rtp-session)

Full Contexts

show video rtp-session

Description

This command displays video session information.

Parameters

service service-id—

Displays video session information pertaining to the specified service ID.

Values—

1 to 2148278317

svc-name — a string up to 64 characters.

source ip-address—

Displays session information for the specified IP address.

detail—

The output displays detailed video session information.

stats —

Displays video session statistics.

Values—

rt-server — Displays video session statistics for the RT server.

fcc-server — Displays video session statistics for the FCC server.

summary—

The output displays summarized video session information.

Output

The following is an example output for this command.

Sample Output

*A:Dut-C# show video rtp-session

===============================================================================

Video RTP session

===============================================================================

Service Id Source address SSRC Id (hex) RT reqs FCC reqs

Interface Source Port Time to expire RT replies FCC replies

-------------------------------------------------------------------------------

1 10.0.103.103 1 0 226

vi 1000 0d 00:03:24 0 225

1 10.0.103.103 1 0 226

vi 1001 0d 00:03:24 0 225

1 10.0.103.103 1 0 226

vi 1002 0d 00:03:24 0 225

1 10.0.103.103 1 0 226

vi 1003 0d 00:03:24 0 225

1 10.0.103.103 1 0 226

vi 1004 0d 00:03:24 0 225

1 10.0.103.103 1 0 226

vi 1005 0d 00:03:24 0 225

1 10.0.103.103 1 0 226

vi 1006 0d 00:03:24 0 225

1 10.0.103.103 1 0 226

vi 1007 0d 00:03:24 0 225

1 10.0.103.103 1 0 226

vi 1008 0d 00:03:24 0 225

1 10.0.103.103 1 0 226

vi 1009 0d 00:03:24 0 225

-------------------------------------------------------------------------------

Number of RTP sessions : 10

===============================================================================

*A:Dut-C#

*A:Dut-C# show video rtp-session summary

===============================================================================

Video RTP session summary

===============================================================================

Num Sessions : 2000

Rx RT Requests : 0 Tx RT Packets : 0

Tx RT Replies : 0 Tx RT Octets : 0

Rx FCC Requests : 371068 Tx FCC Packets : 243011904

Tx FCC Replies : 368259 Tx FCC Octets : 14152149376

-------------------------------------------------------------------------------

Interfaces : 1

===============================================================================

*A:Dut-C#

*A:Dut-C# show video rtp-session detail

===============================================================================

Video RTP session detail

===============================================================================

Service Id : 1

Interface : vi

Source Address : 10.0.103.103 Source Port : 1000

Destination Addr : 10.3.3.3 SSRC Id (hex) : 1

CName : ixiaPort

Up Time : 0d 00:07:08 Time to Expire : 0d 00:04:59

Num RT Requests : 0 Num RT Replies : 0

RT Packets Sent : 0 RT Octets Sent : 0

RT Failed Pkts : 0 Req RTP Packets : 0

Num FCC Requests : 212 Num FCC Replies : 211

FCC Packets Sent : 138582 FCC Octets Sent : 8145140

FCC Failed Pkts : 1

-------------------------------------------------------------------------------

*A:Dut-C#

Supported Platforms

7450 ESS, 7750 SR-7/12/12e, 7750 SR-14s

19.58. rtr-advertisement

rtr-advertisement

Syntax

rtr-advertisement [interface interface-name] [prefix ipv6-prefix[/prefix-length]]

rtr-advertisement [conflicts]

Context

[Tree] (show>router rtr-advertisement)

Full Contexts

show router rtr-advertisement

Description

This command displays router advertisement information.

If no command line arguments are specified, all routes are displayed, sorted by prefix.

Parameters

interface-name—

Specifies the interface name, up to 32 characters.

ipv6-prefix[/prefix-length]—

Displays routes only matching the specified ip-address and length and only applies to the 7750 SR and 7950 XRS.

Values—

ipv6	ipv6-prefix[/pref*:	x:x:x:x:x:x:x:x (eight 16-bit pieces)
		x:x:x:x:x:x:d.d.d.d
		x: [0 to FFFF]H
		d: [0 to 255]D
	prefix-length:	1 to 128

Output

Router-Advertisement Table Output — The following output is an example of router advertisement information, and Table 401 describes the fields.

Sample Output

A:Dut-A# show router rtr-advertisement

=======================================================================

Router Advertisement

=======================================================================

-------------------------------------------------------------------------------

Interface: interfaceNetworkNonDefault

-------------------------------------------------------------------------------

Rtr Advertisement Tx : 8 Last Sent : 00h01m28s

Nbr Solicitation Tx : 83 Last Sent : 00h00m17s

Nbr Advertisement Tx : 74 Last Sent : 00h00m25s

Rtr Advertisement Rx : 8 Rtr Solicitation Rx : 0

Nbr Advertisement Rx : 83 Nbr Solicitation Rx : 74

-------------------------------------------------------------------------------

Server1 : 2001:db8::1

Server2 : N/A

Server3 : N/A

Server4 : N/A

Rdnss-lifetime : 1200 Include-dns : yes

-------------------------------------------------------------------------------

Max Advert Interval : 601 Min Advert Interval : 201

Managed Config : TRUE Other Config : TRUE

Reachable Time : 00h00m00s400ms Router Lifetime : 00h30m01s

Retransmit Time : 00h00m00s400ms Hop Limit : 63

Link MTU : 1500

Prefix: 211::/120

Autonomous Flag : FALSE On-link flag : FALSE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

Prefix: 231::/120

Autonomous Flag : FALSE On-link flag : FALSE

Preferred Lifetime : 49710d06h Valid Lifetime : 49710d06h

Prefix: 241::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s

Prefix: 251::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

-------------------------------------------------------------------------------

Advertisement from: fe80::200:ff:fe00:2

Managed Config : FALSE Other Config : FALSE

Reachable Time : 00h00m00s0ms Router Lifetime : 00h30m00s

Retransmit Time : 00h00m00s0ms Hop Limit : 64

Link MTU : 0

-------------------------------------------------------------------------------

Interface: interfaceServiceNonDefault

-------------------------------------------------------------------------------

Rtr Advertisement Tx : 8 Last Sent : 00h06m41s

Nbr Solicitation Tx : 166 Last Sent : 00h00m04s

Nbr Advertisement Tx : 143 Last Sent : 00h00m05s

Rtr Advertisement Rx : 8 Rtr Solicitation Rx : 0

Nbr Advertisement Rx : 166 Nbr Solicitation Rx : 143

-------------------------------------------------------------------------------

Max Advert Interval : 601 Min Advert Interval : 201

Managed Config : TRUE Other Config : TRUE

Reachable Time : 00h00m00s400ms Router Lifetime : 00h30m01s

Retransmit Time : 00h00m00s400ms Hop Limit : 63

Link MTU : 1500

Prefix: 23::/120

Autonomous Flag : FALSE On-link flag : FALSE

Preferred Lifetime : infinite Valid Lifetime : infinite

Prefix: 24::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s

Prefix: 25::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

-------------------------------------------------------------------------------

Advertisement from: fe80::200:ff:fe00:2

Managed Config : FALSE Other Config : FALSE

Reachable Time : 00h00m00s0ms Router Lifetime : 00h30m00s

Retransmit Time : 00h00m00s0ms Hop Limit : 64

Link MTU : 0

Prefix: 2::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

Prefix: 23::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

Prefix: 24::/119

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

Prefix: 25::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 07d00h00m Valid Lifetime : infinite

Prefix: 231::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

-------------------------------------------------------------------------------

...

A:Dut-A#

Table 401: Router Advertisement Table Fields

Label	Description
Rtr Advertisement Tx/Last Sent	The number of router advertisements sent and time since they were sent
Nbr Solicitation Tx	The number of neighbor solicitations sent and time since they were sent
Nbr Advertisement Tx	The number of neighbor advertisements sent and time since they were sent
Rtr Advertisement Rx	The number of router advertisements received and time since they were received
Nbr Advertisement Rx	The number of neighbor advertisements received and time since they were received
Max Advert Interval	The maximum interval between sending router advertisement messages
Managed Config	True — indicates that DHCPv6 has been configured
Managed Config	False — indicates that DHCPv6 is not available for address configuration
Reachable Time	The time, in milliseconds, that a node assumes a neighbor is reachable after receiving a reachability confirmation
Retransmit Time	The time, in milliseconds, between retransmitted neighbor solicitation messages
Link MTU	The MTU number the nodes use for sending packets on the link
Rtr Solicitation Rx	The number of router solicitations received and time since they were received
Nbr Solicitation Rx	The number of neighbor solicitations received and time since they were received
Min Advert Interval	The minimum interval between sending ICMPv6 neighbor discovery router advertisement messages
Other Config	True — indicates there are other stateful configurations False — indicates there are no other stateful configurations
Router Lifetime	Displays the router lifetime in seconds
Hop Limit	Displays the current hop limit

Router-Advertisement Conflicts Output — The following output is an example of router advertisement conflicts, and Table 402 describes the fields.

Sample Output

A:Dut-A# show>router# rtr-advertisement conflicts

===============================================================================

Router Advertisement

===============================================================================

Interface: interfaceNetworkNonDefault

-------------------------------------------------------------------------------

Advertisement from: fe80::200:ff:fe00:2

Managed Config : FALSE [TRUE]

Other Config : FALSE [TRUE]

Reachable Time : 00h00m00s0ms [00h00m00s400ms]

Router Lifetime : 00h30m00s [00h30m01s]

Retransmit Time : 00h00m00s0ms [00h00m00s400ms]

Hop Limit : 64 [63]

Link MTU : 0 [1500]

Prefix not present in neighbor router advertisement

Prefix: 211::/120

Autonomous Flag : FALSE On-link flag : FALSE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

Prefix not present in neighbor router advertisement

Prefix: 231::/120

Autonomous Flag : FALSE On-link flag : FALSE

Preferred Lifetime : 49710d06h Valid Lifetime : 49710d06h

Prefix not present in neighbor router advertisement

Prefix: 241::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s

Prefix not present in neighbor router advertisement

Prefix: 251::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

-------------------------------------------------------------------------------

Interface: interfaceServiceNonDefault

-------------------------------------------------------------------------------

Advertisement from: fe80::200:ff:fe00:2

Managed Config : FALSE [TRUE]

Other Config : FALSE [TRUE]

Reachable Time : 00h00m00s0ms [00h00m00s400ms]

Router Lifetime : 00h30m00s [00h30m01s]

Retransmit Time : 00h00m00s0ms [00h00m00s400ms]

Hop Limit : 64 [63]

Link MTU : 0 [1500]

Prefix not present in own router advertisement

Prefix: 2::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

Prefix: 23::/120

Autonomous Flag : TRUE [FALSE]

On-link flag : TRUE [FALSE]

Preferred Lifetime: 07d00h00m [infinite]

Valid Lifetime : 30d00h00m [infinite]

Prefix not present in own router advertisement

Prefix: 24::/119

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

Prefix not present in neighbor router advertisement

Prefix: 24::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 00h00m00s Valid Lifetime : 00h00m00s

Prefix: 25::/120

Valid Lifetime : infinite [30d00h00m]

Prefix not present in own router advertisement

Prefix: 231::/120

Autonomous Flag : TRUE On-link flag : TRUE

Preferred Lifetime : 07d00h00m Valid Lifetime : 30d00h00m

===============================================================================

A:Dut-A#

Table 402: Router-Advertisement Conflicts Fields

Label	Description
Advertisement from	The address of the advertising router
Reachable Time	The time, in milliseconds, that a node assumes a neighbor is reachable after receiving a reachability confirmation
Router Lifetime	Displays the router lifetime in seconds
Retransmit Time	The time, in milliseconds, between retransmitted neighbor solicitation messages
Hop Limit	Displays the current hop limit
Link MTU	The MTU number the nodes use for sending packets on the link

Supported Platforms

All

19.59. run-manual-spf

run-manual-spf

Syntax

run-manual-spf

Context

[Tree] (tools>perform>router>isis run-manual-spf)

Full Contexts

tools perform router isis run-manual-spf

Description

This command runs the Shortest Path First (SPF) algorithm.

Supported Platforms

All

run-manual-spf

Syntax

run-manual-spf [externals-only]

Context

[Tree] (tools>perform>router>ospf run-manual-spf)

[Tree] (tools>perform>router>ospf3 run-manual-spf)

Full Contexts

tools perform router ospf run-manual-spf

tools perform router ospf3 run-manual-spf

Description

This command runs the Shorted Path First (SPF) algorithm.

Parameters

externals-only—

Runs external only SPF.

Supported Platforms

All