Refer to “Configuring in the MD-CLI” in the 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI User Guide for more information.
Annotate a configuration element with a comment
annotate string
21.5.R1
All
Configuration comment for the configuration element
annotate string
0 to 2048
This element is part of a list key.
21.5.R1
All
Absolute path or relative path from pwc, or 'pwc'
annotate string string
This element is mandatory.
21.5.R1
All
Commit the candidate configuration
16.0.R1
All
Require explicit confirmation for changes to apply
16.0.R1
All
Commit expiration timeout interval
1 to 65535
10
minutes
This element is the default part of a choice.
The following are part of a choice: accept, cancel, or timeout.
16.0.R1
All
Confirm an ongoing confirmed commit
The following are part of a choice: accept, cancel, or timeout.
16.0.R1
All
Cancel an ongoing confirmed commit issued and roll back
The following are part of a choice: accept, cancel, or timeout.
16.0.R1
All
Persistent confirmed commit ID
commit confirmed persist-id string
16.0.R1
All
Compare changes between datastores
compare string string
16.0.R1
All
Source configuration from which to compare
compare string string
baseline
This element is part of a list key.
16.0.R1
All
Configuration to compare against source configuration
compare string string
candidate
This element is part of a list key.
16.0.R1
All
Show the context from the pwc on each line
The following are part of a choice: flat or netconf-rpc.
16.0.R1
All
Show the full context on each line
16.0.R1
All
Number of lines of context to display before and after
This command specifies the number of lines of context to display before and after changed elements. The context is evaluated separately at each container. If the parameter value is larger than the available context, the maximum available context up to the container boundary is displayed.
0
16.0.R1
All
Compare changes in NETCONF RPC format
This option specifies the display of changes in NETCONF RPC format.
This option is only supported with the summary option.
The following are part of a choice: flat or netconf-rpc.
21.5.R1
All
Suppress specific differences and display a summary
This command allows the suppression of specific differences and displays a summarized comparison. The summarized differences in elements under the highest level container that was deleted is displayed with { ... }. A tilde (~) character is displayed to indicate the new value of an element that has changed.
16.0.R1
All
Absolute path or relative path from pwc
compare string
20.10.R1
All
Copy a configuration element to another
20.10.R1
All
Absolute path or relative path from pwc, or 'pwc'
copy string
20.10.R1
All
Destination path, or 'pwc'
20.10.R1
All
Discard changes in the candidate datastore
16.0.R1
All
Absolute path or relative path from pwc
20.10.R1
All
Load contents from a local or remote file
load keyword string
16.0.R1
All
Load mode
load keyword string
merge, full-replace
This element is part of a list key.
16.0.R1
All
Location of the file to be loaded
load keyword string
This element is part of a list key.
16.0.R1
All
Encryption key of the file to be loaded
load keyword string encryption-key string
8 to 32
21.7.R1
All
Source element path to the list, or 'pwc'
rename string
20.10.R1
All
Rollback to a previous configuration
16.0.R1
All
ID corresponding to the configuration file to roll back
rollback (number | keyword)
0 to 200
startup
16.0.R1
All
Update the candidate baseline
16.0.R4
All
Update the entire candidate
16.0.R4
All
Update the entire BOF candidate
20.10.R1
All
Update the debug candidate
21.5.R1
All
Update the entire LI candidate
19.10.R1
All
Perform dry-run update report without an actual update
16.0.R4
All